HOW TO INSTALL LOCKDOWN BROWSER

I tried installing respondus lockdown broswer and I keep getting an error message
it doesn't give me the option to download it just says save or cancel I tried to do both with no luck.
''(flipped case to undo accidental caps lock - c)''

That application doesn't appear to be compatible with Firefox.
http://www.respondus.com/products/lockdown-browser/requirements.shtml

Similar Messages

How to install a browser certificate OTA

Does anybody know if it's possible to install a browser certificate (for authentication) OTA?
I know that if the certificate is installed in the internet explorer, we can use the desktop manager to synchronize certificates with the device. But unfortunately most of our users do not have the desktop manager installed.
First I was thinking about policies to push the certificate onto the device, but our BB admin told me that you can
not define policies per user (one certificate per user).
I would be nice if it were possible to send the user a http link (email), so that he can fire up the browser and download the certificate. Just like in ie or firefox.
Any ideas?
BR
Predrag
Solved!
Go to Solution.

http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB13492&sliceId=SAL_Public&dialogID=77551987&stateId=0%200%2077553914

Premier 10: How to install Inspiration Browser?

I took Premier and Photoshop Elements off my computer and installed version 10 of both from a CD combo kit.
When I launch Premier Elements, the Organizer loads. One choice is the "Launch Inspiration Browser" button. When I click on it a screen pops up saying Inspriation Browser is not installed and would I like to intall it. Clicking "Yes" sends me to download box in my internet browser at www.goodaps.com. Pushing the "Install Now" button and running the program yelds: "This application cannot be installed because this installer has been mis-configured. Please contact the application author for assistance."
It is also odd that when I launch Photoshop Elements, I can run Inspriration Browser. So, I know it is installed. For some reason the Premier path doesn't work.
Clues, hints or suggestions?
Thanks.
Bill

From page 18 of the Premiere Elements 10, and page 21 of the Photoshop Elements 10, booklets in the retail box version:
Adobe write:
BACK UP / SYNCHRONIZE FILES
Note: Adobe Premiere Elements 10 free online benefits and Adobe Premiere Elements Plus are available in the United States only. Internet access required.
Adobe write:
BACK UP / SYNCHRONIZE FILES
Note: Adobe® Photoshop® Elements 10 free online benefits and Photoshop Elements Plus are available in the United States only. Internet access required.
Cheers,
Neale
Insanity is hereditary, you get it from your children

Error 2032 when installing Widget browser

How do Install Widget browser with the error message error 2032 when installing Widget browser

Can you check the solution here and let us know if you still have problems?
http://forums.adobe.com/message/2861172#2861172#2861172
Thanks,
Preran

How to install flash pluings in firefox os browser?

I have try to visit this page http://www.jimnyclub.com/ and the browser of Firefox OS have not flash installed. I have try to found how to install flash but i cant fount how to do it.

Hello,
See this article:
*https://support.mozilla.org/en-US/kb/install-flash-plugin-view-videos-animations-games

Hello, I have long been using Mozilla Firefoh, but I can't restore a theme (in the browser before I used the theme in anime), I do not remember how to install it and where to find, maybe it was not a topic, and skin. Please help me solve this problem.

(in the browser before I used the theme in anime), I do not remember how to install it and where to find, maybe it was not a topic, and skin.

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

How do you install a browser on an Oracle VM PC?

I have installed Oracle VM Server and manager in one PC. I now need to install a browser on this PC so I can create a server pool and then go on to download PeopleSoft Financials templates. How would I install a browser on this PC? All I get is a cursor command after the VM and manager has started up?
Thanks,
Naishad

VM server does not include XWindows, so you don't get a GUI. You'll have to use a browser from another PC or Laptop to bring up the Server Manager pages. The URL should be something like this:
https://vm.manager.ip.address:4443/OVS

How do I install Inspiration Browser upgrade

having trouble installing Inpiration Browser upgrage.

Moving this discussion to the Adobe PageMaker forum.
Yorkie444 what operating system are you wishing to install PageMaker on?

How to Install Coldfusion 8 64-bit on Small Business Server 2008 64-bit

How to Install Coldfusion 8 64-bit on Small Business Server 2008 64-bit
I ran Coldfusion 8 on SBS 2003 Premium for 6 months with no problems. When we finally decided to cut over to SBS 2008, that’s when everything went to hell. I tried for weeks to get Coldfusion 8 to install properly on the new SBS 2008 64-bit box. During the course which, I found bits and pieces of information for Vista 64-bit and Windows Server 2008 64-bit installations. There are some distinct differences, however, with SBS 2008 since it runs core Web applications like OWA, RWW and Companyweb. After countless unsuccessful attempts, one of which completed corrupted the box, I found the solution.
I have attempted in this white paper to detail the steps to assist others who may be in a similar situation. I don’t make any warranty for the information, but so long as you follow the steps carefully you should be fine. BTW, for those of you who say Adobe offers free technical support for licensed users, that’s not entirely true. Like I said, I purchased CF8 and originally installed it on an SBS 2003 Premium box. After we cut over to SBS 2008 and encountered problems, Adobe wouldn’t provide any technical support without charging. Moreover, based on my initial conversations with Adobe’s technical team, no one seemed to know much about running 64-bit on SBS.
From my understanding, only two versions of Coldfusion 8 can be installed in 64-bit: Enterprise and Developer. The “normal” install (which I paid a grand for) can only be deployed in 32-bit mode – gee, THANKS Adobe! By the way, in Developer mode only two distinct IPs can access the site in addition to the localhost. Any additional IPs will result in a CFML error message stating that the maximum number of IPs have been exceeded. At any rate, take your time and follow the steps to achieve a successful installation.
PRE-INSTALLATION TASKS
Back Up SBS
It’s always a good practice to backup your server before deploying any kind of major system changes. Although this step is optional, I recommend it in case you need to restore your server for any reason. Bear in mind, if your system ever gets totally corrupted, you cannot restore back from the twice daily incremental backup images alone. You will need a full backup with system recovery information to restore. Here are the basic steps:
Click: Start > Programs > Administrative Tools. Right-click “Windows Server Backup” and choose “Run as administrator”.
Click “Backup Once” under Actions in the right-hand pane.
Choose the “Different Options” radio button under Backup Options.
Choose the “Custom” radio button. What we’re primarily interested in here is backing up the OS – not your data partitions or attached drives.
Select the “SYSTEM (C)” checkbox, uncheck any others. Also, ensure that the “Enable system recovery” checkbox is selected before continuing on.
Under ‘Specify Destination Type’, I usually select the “Local drives” radio button and point it to a Terrabyte USB drive I use for backups. You can point this to a tape drive, or select the “Remote shared folder” radio button if you map to a UNC path to store your backup images. Just remember, make sure that whatever path you select can readily be accessed in the event of an emergency. Also, make sure the “Verify after writing (recommended)” checkbox is selected.
Under ‘Specified Advanced Option’, I usually select the “VSS full backup” radio button instead of the default since I don’t use a 3rd party backup product. If like me you rely solely on SBS for your backups, choose the full backup option.
Confirm everything and click “Backup”. This process may take several hours depending on the size of your system.
Verify ISAPI Filters:
In IIS Manager, double-click the server instance in the left-hand pane.
In the center pane under IIS, double click the “Modules” icon to verify that the ISAPI native modules are already installed for IIS. If it’s set up correctly you should see two entries:
IsapiFilterModule %windir%\System32\inetsrv\filter.dll
IsapiModule %windir%\System32\inetsrv\isapi.dll
If either of these modules are missing, you will need to re-install these (google for a solution).
Set Up Development Environment
Create a directory for your CFML files outside of the default Windows location (e.g., default is usually C:\inetpub\wwwroot\). For the purpose of our install, I created a directory on a separate disk called: D:\DEV.
Copy and paste your CFML files and directories into the new DEV root Web directory. This will eventually be the directory where the Coldfusion installer places the CFIDE and CFDOCS folders.
Open IIS Manager and double-click the server instance in the left hand pane. Expand the “Sites” folder. Right-click the Sites folder and select “Add Web Site”.
Enter a name in the “Site Name” box (e.g., “test-site”). You will notice that the system will automatically create a corresponding Application Pool with the same name. NOTE: this is important to prevent conflicts between the DefaultAppPool (needed for SBS Web apps like OWA, RWW, etc.) and the application pool needed for Coldfusion to function properly in SBS 2008.
Point the “Physical Path” to the directory you created in step #1 above (e.g., “D:\DEV”).
Don’t worry about testing the connection. If you click “Test Settings” you may receive a warning that IIS cannot verify access to path (D:\DEV). Don’t worry about this for the time being.
Under “Host name”, enter a DNS path to your site (e.g., “dev.test-site.com”). Click “OK”.
Configure Application Pools for Installation
In IIS Manager, double-click the server instance in the left-hand pane. Click on “Application Pools” to display the list of server application pools in the center pane.
In the “Actions” pane on the right-hand side, click “Set Application Pool Defaults”.
Change “Enable 32-Bit Applications” - the second item from the top – from “False” to “True”, and then click “OK”. NOTE: if you skip this step, Coldfusion will not properly create the required mappings during the install. We will change this setting back after the installation completes – more on this later.
Modify the application.host.config File for 64-Bitness
Click: Start > Programs > Accessories. Right-click “Notepad” and choose “Run as administrator”.
Open the config file from within Notepad – default location: C:\Windows\System32\inetsrv\config\applicationHost.config
Do a search and change this one line from:
<add name="PasswordExpiryModule" image="C:\Windows\system32\RpcProxy\RpcProxy.dll" />
To this:
<add name="PasswordExpiryModule" image="C:\Windows\system32\RpcProxy\RpcProxy.dll" preCondition="bitness64" />
Restart the IIS Admin service.
Set HTTP Compression
According to some threads I read, the http compression module can cause errors if you don’t disable it globally. To remedy this, perform the following:
Click: Start > Programs > Accessories. Right-click “Command Prompt” and choose “Run as administrator”.
At the command prompt, change directory to intetsrv by typing: cd inetsrv
Run the following command:
C:\Windows\system32\inetsrv>appcmd.exe set config -section:system.webServer/httpCompression /-[name='xpress']
This will turn off HTTP compression for all sites in IIS.
In IIS Manager, double-click the server instance in the left-hand pane. Double-click the “Compression” icon in the IIS section of the center pane.
Uncheck all of the boxes, then click the “Apply” button under Actions in the right-hand pane.
Recheck all of the boxes, then click the “Apply” button under Actions in the right-hand pane.
Restart the IIS Admin service. This should enable compression and coldfusion to work at the same time.
NOTE: if for some reason you need to reverse this, run the following command from the command prompt:
C:\Windows\system32\inetsrv\appcmd.exe set config -section:system.webServer/httpCompression /+[name='xpress',doStaticCompression='false',dll='%windir%\system32\inetsrv\suscomp.dll']
INSTALLATION TASKS
Download the 64-bit installation package from Adobe – filename: coldfusion-801-wind64.exe.
Right-click the file and select “Run as administrator”.
Accept the terms of the License Agreement.
If you have an Enterprise license, enter it. For our purposes, just click the “Developer Edition” checkbox.
Select “Server configuration” – the default radio button.
I deselected all subcomponents and can’t guarantee that you’ll arrive at the same results if you select additional items like “.NET Integrated Services”. It should be fine, particularly if you install documentation. My preference was to keep the install as plain vanilla as possible.
Select the directory path for Coldfusion to install into – default is :C\Coldfusion
THE NEXT TWO STEPS ARE CRITICAL TO YOUR SUCCESS. Unselect “All IIS Websites” and select the “Configure specific IIS Website or another web server” radio button. Click “Add”, and then select your test Web site (e.g., “test-site”) under “IIS Web Site”. Hit “OK”.
Do NOT use the default directory path for the CF Administrator location (e.g., default path: “C:\inetpub\wwwroot”). Instead, point the installer to your new DEV root Web directory (e.g., “D:\DEV”). The bottom line, you want the installer to place the CFIDE directory and files within this folder, alongside your other CFML files and folders.
Enter an Administrator password.
Choose to Enable RDS, or not. I enable this by preference but it is not required. This allows you to make updates to files using a CFML editor directly vs. having to move/FTP the files over if you’re working remotely. Opponents to this argue that it’s potentially less secure, but for a lower environment I don’t see this as a major concern.
Confirm everything to kick off the install.
If all goes well you should see a message at the end stating that the install was successful. I recommend you uncheck the box that asks you to open the CF Administrator in the default Web browser after the install. NOTE: we will open it a different way during the post-installation tasks. The worst thing that will happen if you forget to uncheck the box is that you might receive an error that the command prompt hung – not a big deal – just close it and move on to the next (final) steps.
POST-INSTALLATION TASKS
Verify CF Installation:
The installation will create a new folder in your program group: Start > Programs > Adobe > Coldfusion 8. The default “Administrator” link will not work because it points to the wrong path: http://127.0.0.1/CFIDE/administrator/index.cfm. The “127.0.0.1” or “localhost” path as you may recall in IIS, points by default to the “C:\inetpub\wwwroot” directory. Our CFIDE files, however, are located within: D:\DEV.
To bring up the CF Administrator logon page, open up a Web browser and replace the “http://127.0.0.1” part of the path with the DNS path name to your CF environment (e.g., http://dev.test-site.com/CFIDE/administrator/index.cfm).
This should bring up the Coldfusion Administrator Login screen. Enter in the Administrator password you created during the install to log in and configure your application server.
Verify that your test-site renders correctly by typing in your test URL into a Web browser (e.g., http://dev.test-site.com).
Fix Application Pool Defaults to Re-enable SBS Web Applications:
At this point, Coldfusion Administrator and your test CMFL Web site should be working properly. The problem is, default SBS Web applications like OWA, RWW and Companyweb will throw errors and fail to start. Fortunately, this is easily remedied by performing the following steps:
In IIS Manager, double-click the server instance in the left-hand pane. Click on “Application Pools” to display the list of server application pools in the center pane.
In the “Actions” pane on the right-hand side, click “Set Application Pool Defaults”.
Change “Enable 32-Bit Applications” - the second item from the top – from “True” to “False” this time. This should re-enable the SBS applications, which would otherwise result in 500 errors (e.g., OWA, RWW, Companyweb, etc.). There is no need to restart IIS.
Open a Web browser and test that you can once again connect to OWA, RWW and Companyweb successfully.
In IIS click to highlight the application pool for your new site (e.g., “test-site”). In the right-hand pane, click “Advanced Settings”. Ensure that “Enable 32-Bit Applications” – second item from the top – is set to “True” for this application pool specifically.
Lastly, jump up and down for joy! Hopefully now, everything is working. Best of luck!! ..Paul D (MCP).

First, it would be a good idea for you to specify what distro of Linux you're using, as not all are supported by Adobe.
Second, this is probably your problem right here:
http://askubuntu.com/questions/40416/why-is-lib-libc-so-6-missing
In a nutshell, CF expects the 32-bit version of libc.so.6 to be in /lib, but it's probably not. You might be able to modify the installer to point to the correct location for that file, or you might be able to create a symlink to the file - but as the above link describes, creating a symlink might have negative consequences.
As for installing CF 8 64-bit, that's only available with Enterprise, not Standard. If you want CF Standard 64-bit, you need to upgrade to CF 9.
Dave Watts, CTO, Fig Leaf Software

Adobe Bridge in Photoshop - How to install Bridge and camera raw? And what is it all about?

Hi everyone! I am actually in love with this adobe photoshop. I used PSCS2 before, but later on upgraded to CS4. But I feel tired in upgrading to CS5.
One time, I found a tutorial in youtube about camera raw, and would really want to use it. But I was wondering how to install the camera raw. I believe camera raw is a plugin? so I downloaded the plugin here, installed it in my PS. I downloaded a file Camera Raw.8bi and paste it on my C drive - C:\Program Files\Adobe\Photoshop CS4\Plug-ins\File Formats.
I now am very confused, how will I open it? I do not have adobe bridge! After I installed the camera raw, I opened my PS. I clicked the file>then browse in bridge. I had an error, it's "error 2 photoshop11 undefined". Which is what I thought, I might have done something wrong with installing it.
My question is, do you still need adobe bridge installed in order to use camera raw?
If yes, how does it work? How am I suppose to open camera raw?
If no, how am I going to open camera raw without bridge?
And also, where will I download adobe bridge? I cannot find one here for CS4, only adobe bridge for CS5. I am wondering, is it okay to install adobe bridge CS5 and use it with my PS CS4?
I badly need help!

WebDAV (Web-based Distributed Authoring and Versioning) is a set of extensions to HTTP/1.1.
The main difference from FTP as far as I can see is that it allows you to edit documents on a remote web server.
WebDAV was used by the Apple server - MobileMe but is not generally supported by hosting services.
Using WebDAV you can mount a directory locally. This was how iDisk worked on your Mac and you could drag files onto it to upload them to the remote directory.
With WebDAV, a number of users can share a directory which is why its used in local networks but presents security problems when using a remote server.
If you are into file sharing rather than publishing, Dropbox or its new rival SugarSync are more appropriate.

Adobe Bridge shortcut button missing in PS CS6 menu bar, how to install as in PS CS5 [essentials]

Adobe Bridge shortcut button missing in PS CS6 menu bar, how to install as in PS CS5 [essentials]

Yes, Bridge shortcut has been removed from PS CS5. However, you can go to File->Browse in Bridge option to open the file in Br CS6.
Similar query has been answered here.
http://forums.adobe.com/message/4285441

How to install when I keep getting the following massage on windows 7 64 bit with or with firewall on and vwith or with virus protection on here is post This installation package could net be opened verify that the package exist and that you can access

how to install when I keep getting the following massage on windows 7 64 bit with or with firewall on and with or with virus protection on here is post " This installation package could net be opened verify that the package exist and that you can access" same when trying to install quicktime

I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/quicktime/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

Cant figure out how to install vcenter, or even what OS it requires, help!

Unfortunately, the excellent vsphere windows client has now been discontinued (or at least we assume it has because we get error message "you have restricted editing capabilities on a virtual machine of version 9...). So now we have to figure out how to get the web client.
We don't want to install vcenter, due to the unnecessary complexity and cost, but it looks like we have to.
Unfortunately, I cant find out how to install vcentre - I found a page with the prerequisites, but It didn't mention the most important piece of information - what OS it needs, nor how to actually install it from the iso.
We are using vmware essentials kit on a single host. We dont have any windows server licenses, so if vcenter requires this, vmware is out, unfortunately.
what OS is required for vcenter
is vcenter free?
Do we need vcenter or vcenter server, or are they the same?
how do we get it?
How do we install it?
How do we access the web panel?
Where is the documentation? We have spent some considerable time looking for it. The nearest is this page:VMware vSphere Documentation which is for vsphere, not vcenter, and only includes info about the vcenter appliance. On this page is a documentation link to the right, but vcenter is not included in the list of products - its like it doesn't exist.
Why do vmware make it so hard to use vsphere now? Why doesn't sphere simply come with vcenter, as it cant work without it now, or at least offer it as an option when installing vsphere. It must be a show stopper for many people like us who want to evaluate vmware to virtualise a hand full of non HA environments, but get stuck at this point.

Just to clarify, vSphere is a suite of products that includes vCenter, ESXi (The hypervisor) and a whole range of other products.
There is a free version of the ESXi hypervisor but it is limited in features and you get basic management options, no vCenter server to manage multiple hosts so you can't use HA, vMotion, DRS etc etc
The reason for the lengthy installation documentation is that customers have a wide range of requirements, however most will probably opt for the "simple install" option!
Documentation wise, I prefer the HTML version which you can easily search / browse: vSphere 6.0 Documentation Center
1) vCenter requires Windows Server, however you can also use the Linux appliance, saving a windows license. This is much improved in recent years however is still missing some functionality such as Update Manager that some customers will use.
2) No, you need a license for vCenter, it manages your ESXi hosts and manages your virtual environment. See: Compare VMware vSphere Editions and Kits Comparison | United States
3) vCenter / vCenter server are the same thing
4) You need to purchase it, or use a free 60 day evaluation
5) As per the documentation above. The simple install is your best option to get it instaled in 30 minutes, or try the appliance version (Import it onto a host, boot and follow the instructions, database is included, very easy to deploy and no additional licensing costs)
6) Via https://vCenter-Hostname:9443
7) As above

How to install a HP LaserJet 2035N on a LAN

Dear Sir,
My office just equip a new HP LaserJet 2035N for using on our LAN but I can not install this printer for some desktops with OP Windows XP service pack 2. When I use Ping command , no feedback althought these desktops can see this printer on Printer and Faxs. Please help me how to install a HP LaserJet 2035N on a LAN.
Thank you very much.
Best regards.
Dang Dang Quang

just use the shiped driver cd to install the network printer.
1. turn your printer power on and plugin network (LAN) wire in printer and wait for few minutes.
2. after few minutes printer will be assigned a ip address automatically.
3. you can get this ip from its test page (press and hold green button on printer panel)
4. type this ip in your internet explorer. this will opened a printer interface in your browser
5. here you can change its ip according to you network setup and and install its driver accordingly.

I've installed windows 7 with the help of bootcamp on my macbook pro 2011. Please help me how to install mac drivers for windows7 64 bit???

I've installed windows 7 with the help of bootcamp on my macbook pro 2011.
Please help me how to install mac drivers for windows7 64 bit???

You either download drivers from within Boot Camp Assistant and save to USB FAT disk, or you insert and use 10.6.x OS X DVD when in Windows and install and run the SETUP from there.
General Help:
Boot Camp 4.0, OS X Lion: Frequently asked question
http://support.apple.com/kb/HT4818
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
create a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
Installation Guide Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
- support articles and tips, how to.
http://www.apple.com/support/bootcamp/
Macs that work with 64-bit editions of Microsoft Windows Vista and Windows 7
http://support.apple.com/kb/HT1846
Step 4: Install the Boot Camp Drivers for Windows
After installing Windows, install Mac-specific drivers and other software for Windows using your Mac OS X installation disc. The Mac OS X disc installs drivers to support Mac components, including AirPort,built-in iSight camera, the Apple Remote, the trackpad on a portable Mac, and thefunction keys on an Apple keyboard.
The Mac OS X disc also installs the Boot Camp control panel for Windows and theApple Boot Camp system tray item.
To install the Boot Camp drivers:
1 Eject the Windows installation disc.
2 Insert the Mac OS X disc. If the installer doesn’t start automatically, browse the disc using Windows Explorerand double-click the setup.exe file in the Boot Camp directory.
3 Follow the onscreen instructions.
If a message appears that says the software you’re installing has not passed Windows Logo testing, click Continue Anyway.
Windows that appear only briefly during the installation don’t require your input.
If nothing appears to be happening, there may be a hidden window that you mustrespond to. Check the taskbar and look behind open windows.
Important: Do not click the Cancel button in any of the installer dialogs.
4 After your computer restarts, follow the instructions in the Found New Hardware Wizard to update your software drivers (Windows XP only).
5 Follow the instructions for any other wizards that appear.
6 Check for updated Boot Camp drivers by using Apple Software Update or going to www.apple.com/support/bootcamp.
If You Have Problems Installing the Device Drivers
If it appears that the Boot Camp drivers weren’t successfully installed, try repairing them.
To repair Boot Camp drivers:
1 Start up your computer in Windows.
2 Insert your Mac OS X installation disc.
3 If the installer doesn’t start automatically, browse the disc using Windows Explorerand double-click the setup.exe file in the Boot Camp directory.
4 Click Repair and follow the onscreen instructions.
If a message appears that says the software you’re installing has not passed Windows Logo testing, click Continue Anyway.
If you need to reinstall specific drivers, you can install one driver at a time. For example,if your built-in iSight camera isn’t working, you can reinstall just the iSight driver.
Individual drivers are in the Drivers folder on the Mac OS X installation disc.

HOW TO INSTALL LOCKDOWN BROWSER

Similar Messages

Maybe you are looking for