How to install Lync Server
Hello All,
I want to install Lync server 2013, can anyone provide me the document for that. What is the difference between lync server and edge server?
Thanks
Hi,
To deploy Lync Server 2013, you can refer to Microsoft Technet document “Deploying Lync Server 2013” to help you deploy Lync Server 2013 easily.
Also you can use Lync planning tool to provide prescriptive guidance to get you started with planning your topology.
Here is link to download Lync Server 2013 Planning Tool:
http://www.microsoft.com/en-us/download/details.aspx?id=36823
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support
Similar Messages
-
Dear sir
On my XP I TRY TO RUN REPORT WITH REPORT SERVER I GET ERROR
ERR:41213 , CAN YOU HELP ME , HOW TO INSTALL REPORT SERVER IN ORACLE 9I REPORT WITH XPHello,
Test to start the Reports server from a "DOS Window" :
rwserver server=repserver
(replace repserver by the reports server name you want top use)
Regards -
Hi all,
I am new to DMS.How to install content server? and What is the difference between Content server and Kpro server?
Thanks and Regards,
VairavanHi Vairavan
try SAP Service Marketplace at service.sap.com/contentserver and
try the Installation Guides at service.sap.com/instguides -> SAP NetWeaver -> SAP NetWeaver 7.0 (2004s) -> Installation -> Installation u2013 Standaline Engines.
regards, Andreas R -
How to install SQL SERVER 2008 r2 in window 7 home premimum 64bit
how to install SQL SERVER 2008 r2 in home premimum 64bit os. can any say that weather it will support or not in window 7 home premimum os.
my server log file:
Final result: SQL Server installation failed.
To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Exit code (Decimal): -2068052700
Exit facility code: 1212
Exit error code: 1316
Exit message: SQL Server installation
failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Start time: 2014-03-27 00:52:25
End time: 2014-03-27
00:56:09
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL
Server\100\Setup Bootstrap\Log\20140327_005035\SSCRuntime_Cpu32_1.log
Exception help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1
Machine Properties:
Machine name: SEVALAL-PC
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance
Instance ID Feature Language
Edition Version Clustered
Sql Server 2008 R2 MSSQLSERVER MSSQL10_50.MSSQLSERVER
Database Engine Services 1033 Standard Edition 10.50.1600.1 No
Sql Server 2008 R2 MSSQLSERVER MSSQL10_50.MSSQLSERVER
SQL Server Replication 1033 Standard Edition 10.50.1600.1 No
Sql Server 2008 R2 MSSQLSERVER MSSQL10_50.MSSQLSERVER
Full-Text Search 1033 Standard Edition 10.50.1600.1 No
Sql Server 2008 R2 MSSQLSERVER MSAS10_50.MSSQLSERVER
Analysis Services 1033 Standard Edition 10.50.1600.1 No
Sql Server 2008 R2 MSSQLSERVER MSRS10_50.MSSQLSERVER
Reporting Services 1033 Standard Edition 10.50.1600.1 No
Sql Server 2008 SEVALAL MSSQL10.SEVALAL
Database Engine Services 1033 Express Edition 10.3.5500.0
No
Sql Server 2008 SEVALAL MSSQL10.SEVALAL
SQL Server Replication 1033 Express Edition 10.3.5500.0
No
Sql Server 2008 R2
Client Tools Connectivity 1033
10.50.1600.1 No
Sql Server 2008 R2
Client Tools Backwards Compatibility 1033
10.50.1600.1 No
Sql Server 2008 R2
Client Tools SDK 1033
10.50.1600.1 No
Package properties:
Description: SQL Server Database Services
2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 0
Installation location: G:\01.SQL Server 2008 R2 FullVersion\x64\setup\
Installation edition: STANDARD
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: <empty>
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup
Bootstrap\Log\20140327_005035\ConfigurationFile.ini
CUSOURCE:
ENABLERANU: False
ENU: True
ERRORREPORTING: True
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: IS,SSMS,ADV_SSMS,OCS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: *****
HELP: False
IACCEPTSQLSERVERLICENSETERMS: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL
Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft
SQL Server
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT AUTHORITY\SYSTEM
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE:
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: <empty>
RSINSTALLMODE: FilesOnlyMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: <empty>
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: <empty>
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: True
TCPENABLED: 0
UIMODE: Normal
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup
Bootstrap\Log\20140327_005035\ConfigurationFile.ini
Detailed results:
Feature: Integration
Services
Status: Failed:
see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management
Tools - Complete
Status: Failed:
see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management
Tools - Basic
Status: Failed:
see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Microsoft Sync
Framework
Status: Failed:
see logs for details
MSI status: Passed
Configuration status: Passedmy summary log file information:
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Exit code (Decimal): -2068052700
Exit facility code: 1212
Exit error code: 1316
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Start time: 2014-03-27 00:52:25
End time: 2014-03-27 00:56:09
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140327_005035\SSCRuntime_Cpu32_1.log
Exception help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1
Machine Properties:
Machine name: SEVALAL-PC
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Sql Server 2008 R2 MSSQLSERVER MSSQL10_50.MSSQLSERVER Database Engine Services 1033
Standard Edition 10.50.1600.1 No
Sql Server 2008 R2 MSSQLSERVER MSSQL10_50.MSSQLSERVER SQL Server Replication 1033
Standard Edition 10.50.1600.1 No
Sql Server 2008 R2 MSSQLSERVER MSSQL10_50.MSSQLSERVER Full-Text Search 1033
Standard Edition 10.50.1600.1 No
Sql Server 2008 R2 MSSQLSERVER MSAS10_50.MSSQLSERVER Analysis Services 1033
Standard Edition 10.50.1600.1 No
Sql Server 2008 R2 MSSQLSERVER MSRS10_50.MSSQLSERVER Reporting Services 1033
Standard Edition 10.50.1600.1 No
Sql Server 2008 SEVALAL MSSQL10.SEVALAL Database Engine Services 1033
Express Edition 10.3.5500.0 No
Sql Server 2008 SEVALAL MSSQL10.SEVALAL SQL Server Replication 1033
Express Edition 10.3.5500.0 No
Sql Server 2008 R2 Client Tools Connectivity
1033 10.50.1600.1 No
Sql Server 2008 R2 Client Tools Backwards Compatibility
1033 10.50.1600.1 No
Sql Server 2008 R2 Client Tools SDK
1033 10.50.1600.1 No
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 0
Installation location: G:\01.SQL Server 2008 R2 FullVersion\x64\setup\
Installation edition: STANDARD
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: <empty>
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140327_005035\ConfigurationFile.ini
CUSOURCE:
ENABLERANU: False
ENU: True
ERRORREPORTING: True
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: IS,SSMS,ADV_SSMS,OCS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: *****
HELP: False
IACCEPTSQLSERVERLICENSETERMS: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT AUTHORITY\SYSTEM
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE:
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: <empty>
RSINSTALLMODE: FilesOnlyMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: <empty>
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: <empty>
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: True
TCPENABLED: 0
UIMODE: Normal
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140327_005035\ConfigurationFile.ini
Detailed results:
Feature: Integration Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Complete
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Microsoft Sync Framework
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140327_005035\SystemConfigurationCheck_Report.htm -
How to install owb server-side software on UNIX Solaris (SPACR-64)?
Hi there,
How to install owb server-side software on UNIX Solaris (SPACR-64)?
I've read the install guide
and it mentions
3. Start the installer by entering the following at the prompt:
cd mount_point
./runInstaller
I don't have access to any graphical interface on the UNIX box e.g. x-windows nor any cd with the software, just the solaris software downloaded from web - does this include the runinstaller
and is the runisnatller just a command line interface?
I hoped I would be able to download the software from oracle website and then simply run the a setup scrip?
Is it possible to do this? Would I simply substitute cd mount_point to cd <directory I put software)
I've never ran oracle universall installer on UNIX before.
Many Thanks
Edited by: user575470 on Feb 15, 2009 7:54 AM
Edited by: user575470 on Feb 15, 2009 8:06 AMHi,
You can install the server-side software from the downloaded software.
You don't need the CD
You do need an X-windows client on your computer to connect to the server OR work directly on the server.
Without X-windows you cannot start the Oracle Universal Installer.
Maybe there is a command line installation, I have never used this.
I hope this helps.
Regards,
Emile -
How can install SQL Server 2008 Integration Services without CD?
How can install SQL Server 2008 R2 Integration Services without CD?
The PC with Windows 7 32-bits is far away and poor bandwidth . So, I want to install SQL Server 2008 Integration Services without CD.
Does any installer for SSIS only?Copy the install media from a memory stick, portable drive or network.
Arthur My Blog -
How to install windows server 2012 r2 without remove the current windows 8.1
how to install windows server 2012 r2 without remove the current windows 8.1
Use guide below to convert it to 'basic' disk, or install windows on another drive. The supported way is to delete all partitions and convert it to a basic disk.
https://technet.microsoft.com/en-us/library/cc755238.aspx
However, your windows 8.1 must be on another drive?, as windows cannot boot from a dynamic disk.
Best Regards,
Jesper Vindum, Denmark
Systems Administrator
Help the forum: Monitor(alert) your threads and vote helpful replies or mark them as answer, if it helps solving your problem. -
How to install weblogic server in linux fedora 7 ...?
hi.. Experts
i am new to linux os .i am using fedora 7 version of linux. please tell me,,how to install weblogic server on fedora 7 os. i have to run my servlets , jsp pages. on weblogic server.
plzz i m not able to do practice ...so please suggest me..
please Reply...
thanks a lot to all...Yes, they can. They installed in different directories and you have to use different ports.
AFAIK for HTTP for APEX is either part of the installation (eg. in the Oracle Express Edition) or part of the Oracle Installation CDs. For more information see the Oracle Installation Documentation.
--olaf -
How to Install WebLogic Server 9.2 MP3 ?
Hi,
How to Install WebLogic Server 9.2 MP3 on Linux?
and as which user we have to install WebLogic server. Whether we have to install as root user or we have to create different user to install weblogic server?
Please provide me the document to do the installation.
ThanksJust read through the installation guide: [http://e-docs.bea.com/common/docs92/install/index.html] . Look upward in that tree for all relevant WebLogic documentation.
-
How to install tfs server 2012
how to install tfs server 2012
You can use the below link to install Team foundation server 2012
http://www.microsoft.com/en-in/download/details.aspx?id=29035
Prajwal Desai, http://prajwaldesai.com -
How to install DI Server licence
We have SDK licence, but we don't know how to install DI server license, please help.
GiuseppePetr,
definetely
beware Petr, Rune will catch you first
i like collecting points - its funny and i enjoy helping people.
on the other side its really weird when you help people and they don't appreciate it.
thats why i make this "fun points statements"
lol - he gave you the points ))))))))))))))))))))))))))))))
regards
David -
How uninstall a Lync Server 2013 deployment?
Hi,
I have one question... how uninstall a Lync Server 2013 deployment?
Thks!!!To uninstall Lync 2013, You can check below link
http://www.logicspot.net/index.php?id=51
For uninstall Lync Enterprise, you can refer below link {it's same for Lync 2013}
http://terenceluk.blogspot.com/2011/01/step-by-step-instructions-for.html
After uninstall Lync roles and components, you will need to
remove it from Active Directory
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali -
How to reinstall Lync server 2013 Core Component Server Applications
Hi Would like to know how to register back the core server applications and where can i find the priority list. I incidentally
removed the server applications (ClientVersionFilter, IIMFilter, VoIP Apps and EumRouting and Outbouding) when i removed my MSPL script application from the pool. I missed out to put my script
app name after pool name when i run the command remove-cstrustedapplication. Then, it removed all the core apps from that pool.
I found that .am files and .exe files are still in the C:\Program Files\Microsoft Lync Server 2013\Core and tried
to register back using cmdlets but not very sure about the priority of the apps. Or can I install RTCHost.exe? Now Outgoing call is not working. Please kindly help. Thanks in Advance.Oh.. thank you very much both
Saleesh and Eric. I will try it.
What I did is that I used the cmdlets New-CsServerApplication and registered the server apps (checked the server apps
list from testing fe server) like how I register MSPL script app. But I may miss out some components since testing fe server uses Standard Edition. I registered my
MSPL script app back too, but after a while Lync Front End Service keeps on stopping. I am not sure that
MSPL script or missing components which one causes to stop front end service. Now I am checking the event viewer logs.
If I run add-remove Lync component wizard on the server, will it remove any other settings like removing users from
pool? or it just install/unstall lync server core components only?
Many thanks! -
Hi, I bought a new PC with preinstalled Windows 8. Now I need to install Windows Server 2008. Anyone can advise me how to
do it? It has to be in dual boot, in Virtual Machine the display is way too smallYou should check out the Boot-to-VHD capability.
Here is how we do it in a lab environment which we got from a Microsoft lab:
-Verify your computer is running Windows 7 or later.
-Verify you have full administrator rights to your currently installed operating system.
-Verify hard disk encryption or other pre-boot security is turned off.
-Confirm that hardware virtualization technology and memory protection are both enabled in your computer's BIOS setup.
Now we just setup the a VHD with an operating system on it (can even use a downloaded server 180 day trial VHD if you are in a rush). Then go to Disk Management and select Attach VHD and point to the file. Note the drive letter that is assigned to the
mounted VHD.
Run a command prompt as administrator and type: " bcdedit /export BCDBackup.bak " to create an exported backup of your boot loader configuration. Now type bcdboot [drive]:\windows.
Now to test your dual-boot configuration, restart your computer and select the new OS boot option.
An optional last step would be when complete to restore your boot loader by running "bcdedit /import BCDBackup.bak" and delete any VHD files.
A more detailed guide written for Windows 7 but still applies for Windows 8 can be found at:
http://technet.microsoft.com/en-us/video/windows-7-boot-from-vhd.aspx
Hope that helps. -
How to install windows server 2003 on Sunfire x4150?
hi, i'm very new to Sun server.Sorry if i dont know anything about it. But now i have to install Windows Server 2003 on this Sunfire x4150 server. How can i do that? I've try to install but it give me error about the driver.
Some question:
1. Can i install both Sun Os (Solaris?) and Windows Server together? If cant, can i format the Solaris OS and install a fresh Windows?
2. OR actually i should install inside a Virtual Machine?
Here are some links that i found. Am i following the right direction? The article suggest me to download FloppyPack from Sun's website. So, should i just downlaod the FloppyPack (360+KB) ? I dont need to download other driver package?
http://www.seedsofgenius.com/pdf/wp1.pdf
http://dlc.sun.com/pdf/820-5837-10/820-5837-10.pdf
Sorry, i have totally no idea at all.
Thank you very much if you can help me . OTLMight be a bit late for you, but if this helps anyone else, good.
I had the same issue with an X4600 lately. You need to download the Sun Installation Assistant cd and boot from it to install anything other than Solaris. This cd is similar to the ones that Compaq andDell sendout with their servers. It will do a semi automatic install after you give it the information about the os, set up disks, etc.
Easy to do, search the sun support site for the SIA image particular to your hardware.
Maybe you are looking for
-
Hi all, not sure if that title explains it, so let me try more here. I'm noticing a weird view change behavior that I didn't notice before and now I can't get it back to the way it was. It's incredibly frustrating, so hopefully someone can help. When
-
Internal order - error message M7064 when trying to post GR in MIGO
Hi All, When trying to post GR against an internal order in MIGO system gives error message M7064 "Document 000009000030 does not contain any selectable items" I'm not familiar with CO orders. What shall I check and how? Could you please help? In K
-
How to indent an exported xml file
hello, I want to export some xml file but well indented. Could you hlep me ? I find this "http://forums.adobe.com/thread/1323539?tstart=0" in our forum, but i want to apply the prettyPrinting at the time of the exportfile. For help, the end lines of
-
Name photos in Album, put photos in forum
This is really crazy, why can't I name my photos in Album?? And another thing. It appears that I can't put in photos from my Z3 in forums. When I click Find photo (or similar) in the forum I get no link to my photos or album! This is really frighteni
-
Procedure to update the table records
I have to write a procedure to update the existing records. I have one staging table and one decode table. staging table is obtained from a interface with cross join of two tables X1 and X2 and lookup with DECODE table. DECODE ITEM_ID ITEM_CODE STORE