How to install me new audigy Se c

hello all,
I recenly purchased a sound blaster audigy se card but cannot get any audio out of it. I have disabled
onboard sound in the bios and downloaded the ltest driver from the creative web-site, but to no avail.
I am on a dell 670 and have installed the card in slot six whi is: Slot 6: PCI-X 64-bit/00MHz
anyone have any ideas what i'm doing wrong?

I'm not sure that the SB0570 Audigy SE is PCI-X slot compatable, I have also been having problems getting it to play sounds in those slots. Works fine in a regular PCI ( 5 volt ) slots.
Seer this post:?http://forums.creative.com/creativel...ump=true#M3326?Good Luck.... bcnu ?

Similar Messages

  • How to install The Soundblaster Audigy SE in Windows 7 RC?

    :How to install The Soundblaster Audigy SE in Windows 7 RC?Y Two days ago I bought a Soundblaster Audigy SE-retail soundcard. I have a dual boot PC with Windows XP-SP3 and Windows 7 RC. The installation of the soundcard?in Windows XP was easy, no problems, good sound.
    But how to install in Windows 7 RC ?
    I have the installation and applications CD with XP and Vista drivers and I have the driver-download from Creative.com SB24PCDRV LB 0 - 04 - 0090.
    Windows 7 tells me "No device for audio output is installed". Windows automaticly?installed a driver, but that doesn't work. (code 39). The driver download from?creative does not install new drivers and when I try it manually Windows tells me "The best driver is already installed"
    When I uninstall?the driver that Windows installed and try to install the downloaded?creative driver for Windows 7, the driver will not install, and Windows message is something like "?no audio device is installed on this computer"
    What to do ? A computer without sound is nothing...
    Thanks,
    Arie

    >Re: How to install The Soundblaster Audigy SE in Windows 7 RC?% Meocene is 00% on the money. Dan K.'s pack is the best. I have used the pack on four different systems with AUDIGY LS and SE cards that I bought cheaply (all four on Ebay for $40). The package has worked under XP, Vista, and Windows 7 very well.
    I have friends that play Left4Dead and they have been immensely pleased when playing the games in their flats with or without headphones, as compared to their old "onboard RE--t-k" sound.
    The package also works well on a Gateway or HP machine when disabling onboard audio first then installing the Audigy and installing drivers and apps for the first time. Gi've up on using your old CDs, you will only run into a mountain of trouble trying to "Auto-Update" all that with the newest patches.

  • How to install my new ipad2

    how to install my new ipad2

    You can download a complete iPad User Guide here: http://manuals.info.apple.com/en/ipad_user_guide.pdf
    Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
    Apple - iPad - Guided Tours
    http://www.apple.com/ipad/videos/
    Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
    iPad How-Tos  http://ipod.about.com/lr/ipad_how-tos/903396/1/
    You can download this guide to your iPad.
    iPad User Guide for iOS 5
    http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
     Cheers, Tom

  • How to install a new 360 GB hard drive to replace my 60 GB using Time Machine?

    How do I install a new 320 GB hard drive on my MacBook using Time Machine? I have purchased the hard drive and know how to take out the old drive and put in the new drive.

    To transfer your current hard drive I like the free application Carbon Copy Cloner. It makes a bootable copy of everything on your hard drive http://www.bombich.com/index.html

  • How to install the new OS X

    Hello guys ..
    I know that if i download the new software from the app store i can install it on my macbook air easily .. What i don't know is how to delete the previous OS (i want a install) and when i finish installing the new OS, how do i recover all my data from timemachine !!
    If you can give me the step-by-step instruction it will be perfect..
    I don't want to loose my photos, music and data file, word files etc. Are those files saved in time machine as well ?

    I personally don't do that, even with Mac OS X, but other seem to find it works OK.
    If you chose to first erase the drive during the first part of the new OS install then instal the new OS to a Clean drive if you have made the compplete system backup as I suggested you can use the Setup assistant system to copy over Programs, Settings and Personal files from that backup you made just before you started the process.
    Biochemist69 wrote:
    is it good to over write the existing OS ? i think its better if i delete everything and then install the new OS. I might be wrong .. what you think ?

  • I'm not very computer savvy. I don't know how to install my new printer--PIXMA MP490

    How can I get help installing my new printer?  It's a PIXMA MP490.

    Hi tada!
    To have a better understanding of your issue, please let everyone know what operating system (Windows XP/Vista/7/8 or OS 10.X) you are using. That way, community will be able to assist you with suggestions appropriate for your product.
    If this is an urgent support need, please CLICK HERE to reach our friendly Technical Support Team by phone or email.
    Thanks!

  • How to install a new XDK-Java for using XSQL in my Oracle8i?

    Hello,
    I'am trying to install a new version of XDK Java on my computer to run new features of the XSQL-servlet
    (for example the FOP-serializer). Can you please tell me how to insall this XDK, and what files I have to change to run the XDK and XSQL-servlet with my Apache-Server?
    Thanks in advance.
    Martijn

    Did you check this out:
    http://odiexperts.com/manual-entry-in-odi-driver-list

  • How to install a new voice for function "say" by console?

    Hi,
    For a Text-To-Speech project, I'm using the function "say".
    The problem is that I want to use several languages, and the user of my project have to do nothing except to launch my program.
    So, how can I install a new voice by console?
    I've the other solution to install the voice folder while the compilation but the folder is huge, so it's not optimized...

    I'm actually doing it with AppleScript but I'm not an expert (far from this), so if some one could help me.

  • PSE 6 for Mac, how to install the new layer mask tool

    I just bought the new PSE 6 for Mac, whew what a change in the color of workspace.
    My classmates and I are wondering how to install the free layer mask tool that Sue Chastain has on her About site.
    Or perhaps first, has anyone used it and do you like it?
    Do you put it here?
    http://www.jcarter.net/mac-stuff/layermaskthing.jpg
    Havent been to this great forum for a while, been busy, I miss you all, and shall try to visit more often.
    I remember when I was a beginner at this, I learned so much here and you all were amazing help!
    Thanks,
    Jane

    Hi Barbara,
    Its this one,
    http://graphicssoft.about.com/od/pselements/p/layermasks.htm
    So I assumed afterwards that it wasn't for Mac. So I went ahead and installed the older action for my PSE 4.
    I was hoping it was platform agnostic, but when I looked at this, the difference between the 2 versions,
    http://www.jcarter.net/mac-stuff/previewfolder-missing.jpg
    Not knowing where the Previews folder was, threw me overboard.
    And I didn't read all the way down Sue's page, as my old brain got ahead of my eyes.
    So I really dont know what to do next with this, some of my classmates are wondering the same thing.
    Thank you,
    Jane

  • How to install on new (late 2010) Mac Pro

    I am going to use Migration Assistant to transfer my data from my old G5 to my new Mac Pro, but would appreciate advice on how to install AW on the new Mac. I have my original Appleworks 6 DVD with the notation in small print: Version 6.2.9 (circa 2003). I then also have a CD that I burned and labeled "Appleworks 6.2.9 Updater". I vaguely remember doing this, but can not recall what it was for. Please advice. Thanks!

    OK, got it by installing from the disk and the computer sending me to Rosetta. Much simpler than I expected. Appleworks rocks .

  • How to install a new package?

    I'm a bit new to Java...
    How can i installa a new package on my JDK?
    Thanks
    Riccardo from Italy

    If you are wanting to update your Jave installation, you must download the new version (most current is 1.4.1), deinstall the old version, and install the new version. There is no "update" from one version to the next.
    Be sure to deinstall using (on Windows) the Add/Remove Program function in Control Panel, as there are Registry entries that must be removed.

  • How to install a new hard drive in a G4?

    I got instructions from the genius bar about buying and installing a new hard drive. I installed it in the front carrier.I must have not connected it correctly as it doesn't show up anywhere on my computer. The main thing I wasn't sure about was connecting the ribbon and power cord. I'm hoping I can avoid another trip to the Apple Store. Diane Cassidy

    Hi Diane:
    This is probably not the right forum to be asking such a question, but maybe this link will get you started. it may or may not help considering you didn't tell us which G4 you had, but go there until something better comes up!
    http://docs.info.apple.com/article.html?artnum=75312
    Otherwise, I would direct my questions here if I were you:
    Forum: Expanding your Power Mac G4
    http://discussions.apple.com/forum.jspa?forumID=586&start=0
    Good luck!
    Sue

  • HT1305 I saw a video on how to install a new hard drive on G5.  Does anyone have an address for this video?

    Is there a video that shows how to install a hard drive on a G5?

    Also here...
    http://eshop.macsales.com/installvideos/powermac_g5_hd/

  • How to install on new hard drive

    I have a macbook pro 13' mid 2012. I just replacedthe internal hard drive and don't know how to install the osx. I tried partitioning the hard drive to have a GUID map scheme but it got stuck on the connecting with disk step (dont remember what its called), about 50% in. I exited disk utility and then repeated this again but this time it got stuck on preparing to partition. I tried to remove the partitions and now its stuck on preparing to remove partition. What do I do? I cant install without formatting first.

    Where did you get that disk drive?
    It certainly doesn't sound like it is very good.
    I would be checking to find out if you can exchange it for a replacement.
    Allan

  • How to install the new Airport + Bluetooth 2.0+EDR card on my dual G5?

    I just received the card (Part# MA252G/A) in the mail but have no instructions on how to install it.
    The Apple website makes it seem like you have to have a BA in computer science to do it, and provides no instrutions. I'd like to see what's involved before attemting the install myself. Mind you, I've built computers from scratch so I'm inclined to believe I can do this myself with a little help.
    Thanks!

    I was told that they wouldn't sell it to a third party. But if you got it, Apple installs it without charge so I'd let them do it and insure that your warranty isn't voided. Get to know the folks at the apple store near you (if you have one). They're really helpful and do things "gratis" on occasion. This is one of the reasons I usually try to "buy locally" for everything. It may be cheaper online but the personal relationship often helps out in the long run and the cost winds up being less. fwiw, my 2¢.

Maybe you are looking for

  • I'm trying to add prev and next button to a gallery

    I've found a free flash gallery which looks good for my need here: http://www.flashgallery.org/ The only problem is that the gallery doesn't have prev and next buttons for the full size images, so I'm trying to add them. I've been able to add those b

  • FTP Adapter errors out while writing a file

    Hi , I am facing this problem while using FTP adapter tries to write a file on a specific remote machine.The Adapter throws this following error: Missing class: oracle.tip.adapter.api.TranslationAware      Dependent class: oracle.tip.adapter.file.out

  • PDF quality changes when output

    The same PDF file is printed from various Macs and some print the file great and others cause the images to look low res. Every Mac has the same print driver. Why is this happening?

  • Function Module for Transfer Posting(MB1B)

    Hi All,       Is there any Function Module to post the transfered stock? Thanks, Digamber

  • Dreamweaver Cs3 & Vista

    I buyed a copy of Dreamweaver cs3 with OS Vista, but when I try to load the program, since the first time I tried, it remains on "Inizializiong Files", until I stop the process. What can I do?