How to install memory

Ok, simple question I hope, I have found confusing info on here and the web, I will be adding 4 gigs to my Mac Pro 2008 3.1, it currently has 2 gigs one on top one on bottom, I know I must place both one gig modules on the same board and both the new two gig modules on the other board, but do the 2 or 4 gigs go on top.

5th question in one day w/ 2008 ... does not matter, what does is having 8 dimms fill all slots is best
add 6 x 1Gg or more

Similar Messages

How to install memory modules on a macbook pro 15"

I run Windows 7 via parallels desktop on my macbook pro. How do I type special characters on a Word document using the mac keyboard?

how to install memory modules on a macbook pro 15"
Read the manual / user guide that came with your comptuer or download it from http://support.apple.com/manuals/
I run Windows 7 via parallels desktop on my macbook pro. How do I type special characters on a Word document using the mac keyboard?
Post your question on the Paralells forums: http://forums.parallels.com

How do I install memory into the Pavilion 17z-F2 series laptops?

How do I install memory into the Pavilion 17z-F (17z-F200, product L2H13AV) series laptops?
HP appears to have no maintenance guide available for this model series. What's up with that?
Please, do not offer the generic (and out-of-date) Pavilion 17 Notebook PC Maintenance and Service Guide. It does not appear to apply to the 17z-F series. This guide instructs to remove the bottom service panel which I could have figured that out on my own. However, the 17z-F series does not appear to have any removable panels at all. I took an up-close look at the Pavilion 17z-F100. And, it does not have any removable panels on the underside, except for the battery. So, I presume the 17z-F200 to be the same.
I am a computer technician. And, this is the first laptop I have seen without any service panels. I am probably going to have to disassemble the entire outer-shell to install memory (or to replace the hard disk drive once the time comes). But, every laptop I have worked on in the past had its own special array of hidden screws or special tricks for disassembly. So, having a maintenance guide is a necessity to avoid damaging plastic mounts, clips, guides, etc.
This question was solved.
View Solution.

How about this one:
Pavilion 17z Manual
Don't get me started on this. It's one of my pet peeves, too. HP is not the only one doing this. Acer and Toshiba, etc. also are selling "closed" systems now. I hate it. I will absolutely never knowingly buy one but I am spending a lot of time here answering questions just like this. Good luck and let us know how you do. Sounds like you will be fine.
If this is "the Answer" please click "Accept as Solution" to help others find it.

How do I install memory into the Pavilion 17z-F200 (part L2H13AV)

How do I install memory into the Pavilion 17z-F200 (part L2H13AV)?
HP appears to have no maintenance guide available for this model. What's up with that?
I took a look at the Pavilion 17z-F100 (sent by mistake). It does not have any removable panels on the underside. And, the User Guide for the 17z-F200 indicates that it will be the same (assuming it ever arrives).
I am probably going to have to disassemble the entire outer-shell to install memory (or replace the hard disk drive, once the time comes). But, every laptop I have worked on in the past has had its own special place for hidden screws or special trick to disassembly. So, having a maintenance guide is a necessity to avoid damaging plastic mounts, clips, guides, etc.
This question was solved.
View Solution.

@DLBurkhart ,
Hello and thank you for posting on the HP support forums. Here is a link to the HP Pavilion 17 notebook Maintenance and service guide.
HP Pavilion 17 Notebook PC Maintenance and Service Guide
In the guide you will find the instructions on how to access the memory module and as well you should find the supported memory configurations.
I hope this was helpful.
Thank you for posting and have a great day
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

How to do a bios update for installed memory

I just bought 2 1 gb dimms and my computer does not recognize them. Even when I switch them from the slots to mke sure I read do a BIOS update. How do you do that, as I also have the newest 10.9 system. Thanks

Soounds like an Early 2008 3,1 (helps us to list and give us more about this mac) that uses FBDIMMs.
How To Install and Remove Memory Mac Pro
https://support.apple.com/kb/HT4433
Mac Pro 2009 - 2012
http://www.datamemorysystems.com/apple-mac-pro-quad-core-intel-xeon-nehalem-2-66 ghz-mb871ll/a-early-2009-memory-upgrades/
2x2GB FBDIMM DDR2 667MHz @ $25 work in 2008 even though it shipped with and calls for 800MHz
http://www.amazon.com/BUFFERED-PC2-5300-FB-DIMM-APPLE-Memory/dp/B002ORUUAC/

How is additional memory installed on a current iMac 27" computer?

How is additional memory installed on a current iMac 27" that comes with the factory installed 4GB?

That's correct. Save money by shopping for memory. Check OWC and DataMem. The brand is really not very important. Buy from a reliable vendor and always purchase product that carries a manufacturer's Lifetime Warranty.

How to install ovi suite to a drive other than C:?...

how to install ovi suite to a drive other than c:??? my c: drive is almost full with other partitions perfectly free to install it, how do i do that? can i use previous versions of ovi suite to use with my e63? at this point, i'm unable to use ovi suite at all, because there's no room to install it on my c: drive.
allllllllso there's one more thing, when i originally had tried installing ovi suite on my computer i had more than 1gb free. after installing it i on'ly had 500mb free. i had only intended for it to use a very small amount of space, and since i also use my c: drive for virtual memory i quickly uninstalled it, looking for an option i'd maybe skipped over while installing it the first time. no luck. anyways, when i looked in the add/remove programs control panel the installed size of ovi suite was only 40-50mb. even after uninstalling ovi suite the extra memory space that seemed to all of a sudden taken up by the installation stayed used.
when looking at the file sizes of everything on my hard drive, (including system files and paging file) there is still a descreprency between the amount of memory used and the size of all files total on the drive. at this point im quite disgusted and disapointed in ovi suite as i'm mostly unable to use it to connect my phone to my computer and i'm also having problems with the CA101 cable as well. i guess i'll have to go check for another cable.
nokia!!! wake up and fix yo **bleep**!!!!
anyone have any solutions for the main problem? (installing to a drive other than c? is there support for this option in any of the new beta versions? can that be included in the newest betas? i'm suuuuuure i'm not the only one begging for this option!!!

Hi ostrenga4, sorry to hear about your experiences.
When installing Nokia Ovi Suite to PC, Windows makes "system restoration points", which are available to restore operating system to previous condition, if something goes wrong, for example in driver installation.
You can change install location of Nokia Ovi Suite with following:
- Download Nokia Ovi Suite install package from Nokia Ovi Suite pages
- Start Windows Command prompt
- From Command prompt, navigate to folder containing Nokia Ovi Suite install package, which you downloaded
- Start Nokia Ovi Suite install package with command line "Nokia_Ovi_Suite_webinstaller.exe /TARGET="D:\TestDir\Test"
- This results, that Nokia Ovi Suite installer creates folder D:\TestDir\Test (if that doesn't exist) and installs Nokia Ovi Suite there.
- Unfortunately, Windows Installer still keeps installer cache files and system restoration points in C: drive (or whatever your system drive is)
As you can see, this is possible, but it is very much recommend to have enough space for installing software into system drive.
Cheers, Samuli

How to install Windows on MAC? (Can't see the check box "Install or remove Windows 7 or later version" on Boot Camp Assistant)

I want to install Windows 7 on my MBP mid 2012 but in Boot Camp does not appear the check box: "Install or remove Windows 7 or later version". I continued with making the USB bootable with Windows 7 but then when I restart and boot with the USB I still can't install Windows because then I receive an error: ""Windows cannot be installed on this disk. The selected disk is of GPT partition style."
From OS with Boot Camp I didn't manage to make a partition for Windows instead I made one with Disk Utility (formated FAT).
After booting from USB that partition was also formated into NTFS necessary for Windows. Still the same error.
Any idea how to install Windows on my MAC?

My Windows copy is a X64.
MBP mid 2012 with Mountain Lion 10.8.3.
Model Identifier:          MacBookPro9,2
Processor Name:          Intel Core i5
Processor Speed:          2.5 GHz
Number of Processors:          1
Total Number of Cores:          2
L2 Cache (per Core):          256 KB
L3 Cache:          3 MB
Memory:          4 GB
Boot ROM Version:          MBP91.00D3.B08
SMC Version (system):          2.2f41
Should have:
MacBook Pro (13-inch, Mid 2012)
MacBookPro9,2
MBP91.00D3.B08 (EFI 2.9)
If you are refering to this I tried to update the EFI version (I see only SMC version 2.9 as a diferrence of what I have) but on installing I received an error: "This software is not supported on your system."

How to install Oracle 9i on redhat 9

i have installed 4-5 times oracle 9i on linux ...but the thing is ..as soon i restart my pc..the SQLPLUS doest not start from the redhat 9 terminal
...So plz tell me the step by step procedure how to install Oracle 9i on linux ...
.... What & where is .bash_profile file is located ...???
How to create system shareable memory ...??? without this SQLPLUS is not starting ...
how to modify the kernel variables ..???
..

What & where is .bash_profile file is located ...???The file exists under oracle home directory.
# ls -l /home/oracle/.bash_profile
-rw-r--r-- 1 oracle dba 328 11? 2 15:35 /home/oracle/.bash_profile
How to create system shareable memory ? without this SQLPLUS is not starting.Append your shareable memory parameters to /etc/sysctl.conf, You might want to change these values if you have more RAM:
kernel.shmmax = 536870912
kernel.shmmni = 4096
kernel.shmall = 2097152
REBOOT the system so the kernel changes can take effect, or if rebooting is not an option, you can change the kernel params at runtime by issuing:
# echo 536870912 > /proc/sys/kernel/shmmax
# echo 4096 > /proc/sys/kernel/shmmni
# echo 2097152 > /proc/sys/kernel/shmall
how to modify the kernel variables ..???method 1:
To modify kernel parameters a common way is to change /proc file system:
1. Log in as root user.
2. Change to the /proc/sys/kernel directory.
3. echo <desired list of values> > <group of parameters>
But this update is not permanent and after system reboot, your kernel parameters's
values will be the same as before.
method 2:
setuping permanently kernel parameter values ,is to use '/etc/sysctl.conf' file.
Every time the system boots, the '/etc/rc.d/rc.sysinit' script is executed
by init process. This shell script contains a call to sysctl command and
reads the values from /etc/sysctl.conf file as the ones to be set Therefore, any values added to /etc/sysctl.conf will take effect after the system boot or without downtime using "sysctl -p" command

[SOLVED] How to install and run (on debian) a separate, downlevel version of firefox for the F5/firepass VPN?

(Note: my problem is similar to [https://support.mozilla.org/en-US/questions/931534?e=es&as=aaq another current problem] except that
* OP is running windows (I'm running a debian linux)
* OP is asking a more general question (how to fix?) while I'm asking for details on a proposed fix)
I'm currently running
$ lsb_release -ds
Linux Mint Debian Edition
$ cat /etc/debian_version
wheezy/sid
$ uname -rv
3.2.0-2-amd64 #1 SMP Sun Mar 4 22:48:17 UTC 2012
$ iceweasel --version
Mozilla Iceweasel 13.0.1
I'd like to continue running an uplevel iceweasel ([http://en.wikipedia.org/wiki/Mozilla_Corporation_software_rebranded_by_the_Debian_project which is firefox]) but apparently need to run a downlevel version in order to run a particular vendor-supplied plugin. How best to do that (i.e., with minimal performance degradation, and without affecting my package management)? Or is there another way to solve the general problem (running the F5 Network Access Plugin)? Why I ask:
My employer is giving me remote access via a SecurID token and the F5 Network Access Plugin (F5NAP). The latter is in fact a browser plugin, which seems to me an odd way to implement a VPN, but it's the only offered option. Unfortunately,
* the only browsers supported for linux are Firefox 3 and Firefox 8 (per [http://support.f5.com/kb/en-us/products/big-ip_apm/manuals/product/apm_compatibility_matrix_10_2_1.html this]--scroll to "Linux Operating Systems")
* my primary laptop runs LMDE (see above) with Iceweasel 13 (from the mozilla.debian.net repository), which I want to keep. (It's the uplevel browser, dammit !-)
So I first tried to install the F5NAP on my iceweasel, hoping it was sufficiently like the listed versions. I browsed to my employer's site, logged in using the token, and followed the link to install the plugin. Unfortunately, that failed: the xpi began running, but then quit with the message
> F5 Network Access Plugin could not be installed because it is not compatible with Iceweasel 13.0.1
Hoping for a simple workaround, I told the often-useful User Agent Switcher plugin to emulate Firefox 8, but no fix. Hence it seems like I will hafta
* install Firefox 3 or Firefox 8
* run that downlevel browser whenever I want remote access
* run the uplevel browser for everything else
This definitely seems like a kludge, so I am open to alternatives. Meanwhile I'm wondering:
# Which of the F5-supported downlevel browsers (Firefox 3 or Firefox 8) has the smaller memory footprint?
# How to install the downlevel browser so that it does not interfere with my uplevel browser's configuration, operation, and updating via debian package management?
# How to run the downlevel browser so that its operation does not interfere with my uplevel browser? I know firefox typically wants to run singleton.

@[https://support.mozilla.org/en-US/user/160087 verdi]: thanks for your helpful suggestions. The "fix" (actually a kludge, but I gotta work with what F5 and my employer give me) was:
# Install/run latest Firefox 3 (despite there being [https://support.mozilla.org/en-US/questions/932269 no 64-bit version for linux]) using [https://docs.google.com/open?id=0BzDAFHgIxRzKbmJDUGZqTzhfbDg this bash scriptlet].
# Create a [https://docs.google.com/open?id=0BzDAFHgIxRzKQjRyQndqUTJpRXM run script] to start firefox so that one can
#* choose the appropriate profile (I was unable to set it from the script without startup error)
#* run multiple instances (I don't want 3.x firefox touching my uplevel profile)
# Run Firefox 3.x with the runner, then point it to my employer's site to install the [http://support.f5.com/kb/en-us/products/big-ip_apm/manuals/product/apm_compatibility_matrix_10_2_1.html F5 Network Access Plugin] (restarting firefox as required).
The gnome-terminal tab from which I invoke the runner spews a bazillion "wrong ELF class: ELFCLASS64" errors, but the plugin runs, and I can SSH normally (though more slowly) to servers on the VLAN from another terminal tab.

How to instal a theme in a N81 8G??

I don't now how to instal a theme in what part of the memory I have to put the theme??

15-Mar-2008 05:25 AM
vjvalverde wrote:
I don't now how to instal a theme in what part of the memory I have to put the theme??
You need to use application manager of Pc suite to install the theme. It copies to phone by default. Ensure that the theme is suited to work with your phone.
If my post has helped you please click the white star on the right

How to install opensuse-arm-xfce-12.3 on Lenovo A3000 tab

Sir recently I have bought Lenovo A3000 tab which is having android version 4.2.2 and 16 GB internal memory, 1.2 giga hertz quad core processor and 1GB ram.
I want to use opensuse on my tab so I have downloaded the file opensuse-arm-xfce-12.3.tar.xz I have extracted successfully it and found .IMG file and opensuse.sh file.
Kindly suggest how to install the above os in my tab with dual booting ie., opensuse and android.
I am expecting the two operating systems to be on 16 GB internal memory and so suggest how to partition the internal memory.
I have searched the net and followed the procedure which is too difficult to understand even though I have performed some of the steps like becoming root, installing busy box,complete Linux installer etc.,.
when I launch the complete Linux installer app it is showing message as unable to mount the image loop device not working.
Regards,
Rupesh.
Regards,
Rupesh.

hi Fabian,
Welcome to the Forums.
Can y0u check tjniko s post in this thread as he was able to successfully install Win8.1 on the device.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

How can install SQL Server 2008 Integration Services without CD?

How can install SQL Server 2008 R2 Integration Services without CD?
The PC with Windows 7 32-bits is far away and poor bandwidth . So, I want to install SQL Server 2008 Integration Services without CD.
Does any installer for SSIS only?

Copy the install media from a memory stick, portable drive or network.
Arthur My Blog

HT4972 4th gen touch ios 7 how to install

4th gen touch ios 7 how to install,and can't get old store id changed I changed it every were but when try to up date apps puts old id up won't take new password.Ios7 I loaded and tryed shift key in itunes to get installed and won't take does this mean its to old to use excepet for door stop when allready have to many 3,3g;3gs,4,now 4th gen touch and out of doors! If because it will be slow who cares every thing slows with age.

. As Apple said in June, iOS 7 is not compatible with the 4G iPod.
All the iOS devices compatible (iPhone 4 and later, iPad 2 and later, and 5G iPod touch) with iOS 7 have at least 512 MB of memory (RAM). The 4G iPod only has 256 MB

How to Install XI Patch?

Hi,
I had installed XI 3.0 and did not install any further path for XI.
Could any one please let me know where i can find information on "How to install XI patch". This much i know that this is available on SAP site but have not been able to find or recall my memory where exctly these documentation reside.
It will be great help if anybody can helpout.
Thanks!
Dheeraj Thareja

Dheeraj,
Check if it helps...
Re: XI 3.0 Patch Procedure??
Anand

How to install memory

Similar Messages

Maybe you are looking for