How to install missing references

Im using a template I found on youtube that was made in March 4, 2015 Free 3D Intro #41 | Green Colorful Synced Wings Intro Template - YouTube and I went to open up the after effects part ( because it came with a folder with premade template for Cinema 4D and after effects, and when i opened it i got this message:
( This project contains 9 references to missing effects. Please install the following effects to restore these references.("S_TVDamage","S_ZDefocus","S_Shake","Looks","S_Glow","S_ChannelSwitcher","Par ticular")
I want to know how to fix this so that i am able to carry on with the tutorial of the video. I am using After Effects CC 2014. Please tell me how to download these missing effects!
Thankyou

It's simple: You buy the plug-ins. One is GenArts' Sapphire suite, the other is Trapcode Particular. Both have demo/ trial versions, too.
Mylenium

Similar Messages

How to install missing plugins for flash player

Hi, My name is rebecca and i am in school for Computer information technology. I have a Dell Intel Pentium Processor. It has a 32 bit operationg system and 4.0 gb of ram I just recently added mozilla firefox to my computer then i tried to download Adobe flash player to my computer on mozilla firefox but the top of the screen always states Install Missing Plug-ins. However it does not let me know what those plugins are please help me to get adobe flashplayer on my mozilla firefox?

Hi, First make sure you are using the Administrator Account. Download and SAVE to your Desktop this Flash Player Installer for Firefox:
http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player.exe
Close all browser windows, disable an app in the system tray that uses Flash, messenger services, Anti-Virus that runs in realtime.
RUN the Installer from your Desktop and then Reboot your computer.
Test here and if you see the animation and the version number, then Flash Player has been Installed correctly.
http://www.adobe.com/software/flash/about/
Hope this works for you.
eidnolb

How to install missing dependencies?

I'm trying to install Mailpile (https://aur.archlinux.org/packages/mailpile/)
these are showing as missing dependencies when I "makepkg -s"
python2-pgpdump
spambayes>=1.1a6
I got the above two from AUR and "makepkg -s" successfully and then stuck them in /usr/local/bin but it didn't solve the dependencies. I'm not sure I know what I'm doing. Anybody know how to get Mailpile installed?
Last edited by bzpnbx (2014-10-14 15:48:51)

You did run it on the built package, right? Not on the AUR tarball?
Like Wormzy said, you really need to read the AUR Wiki page.
nomorewindows wrote:I don't think you even need --asdeps. It just installs them as any other package. Then when they install, makepkg -s the main package.
These packages are being installed because they are dependencies of another package. For pacman to function correctly, --asdeps is needed. If you omit it, pacman thinks they're explicitly installed and will not remove them when the main package is removed nor list them in -Qdt.
Last edited by Scimmia (2014-10-14 16:50:36)

How to install missing kaleidoscope effect

I'm trying to edit a Final Cut project created by a friend who has the same version of FCStudio that I do: 5.1.4
I copied the project and media files onto my computer, but when I try to render it I get the message:
"The following effects could not be loaded:
Kaleidoscope
Membrane
These effects will not be applied. Please install the appropriate effects and re-open the project."
I took a look at the FCP install instructions on the install disk, and there was a custom install, but it didn't appear to offer selections of effect groups, just the whole FCP or not.
The only difference between my install and that of my friend that jumps out at me is that she installed Motion and I didn't. Would FCP effects be installed with Motion?
Otherwise, how do I "install the appropriate effects?"

"Would FCP effects be installed with Motion?"
Kaleidoscope and Membrane are FXPlug Plugins installed with Motion.
FCP 5.1.2-5.1.4 has access to Motion's FXPlug Plugins.
If you didn't install Motion, you will be missing the Kaleidoscope FX plugin (which is found in the FCP Effects "Tiling" folder) and Membrane FX plugin (which is found in the FCP Effects "Render" folder) as well as the following FXPlug Plugins:
Directional Blur
Prism
Soft Focus
Channel Swap
Insect Eye
Refraction
Stripes
Target
Twirl
Light Rays
Overdrive
Color Reduce
Gradient Colorize
HSV Adjust
Threshold
Matte Magic
Color Emboss
Extrude
Indent
Lens Flare
Line Art
Noise Dissolve
Slit Scan
Slit Tunnel
Vectorize Color
Vignette
Kaleidoscope
Random Tile
Time Scrub
Time Strobe
Time Trails
Color Solid
Cellular
Clouds
Membrane
Noise
Swirly
But you say you can't install motion:
"which I can't do on my computer because of the video card"
Then you are out of luck, sorry.
But if you did have an approved card and you wish to install Motion now to get these effects, you need to follow these instructions from Apple.
http://docs.info.apple.com/article.html?artnum=304456
"If you install Motion 2.1 after installing the Final Cut Pro 5.1.2 update, Final Cut Pro may subsequently fail to open."
G5 1.8 DP (PCI-X) Mac OS X (10.4.9) ATI X800 XT, 4GB RAM, 20" & 23" ACDs, M-Audio Revolution 5.1, Fostex D15 DAT

How to install missing video filters

Hello i have made changes to a video using after affect then returning to the video in Premiere Pro and the filters are missing, what is the solution
Thanks

Either render your AE project and replace the footage or use Dynamic Link. You must go through some of the getting started materials and help files before you can effectively use After Effects.

How to install missing driver?

Yesterday i tried to install the new update to web os and it wasn't downloading. So i shut down the tablet and turned it back on to see if that would help. But it must have been at least partially downloaded so it started installing the incompletely downloaded update. This must have wiped my drivers somehow. None of the buttons or the touch screen work and it is stuck on the finished downloading screen. The screen lights up when i plug in the usb, but i can't transfer files. I looked at the properties of the tablet while it was connected to usb on my computer and it said that the novacom driver is gone. Is there anyway that i can reinstall the novacom driver or reinstall the entire web os from my computer. I'm getting pretty frustated so any suggestions would help. Thanks.
Post relates to: HP TouchPad (WiFi)

Have you tried rebooting it yet? Press and hold the center and power buttons together for at least 15 seconds.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

My iPad 2 , safari missing new page button - please help how to instal it

I am total novice in using ipad2 . Can some please advice me on how to install missing new button page on safari iPad 2?
Also sorry it may be daft question ,my old computer crashed and I had to instal iTunes on a new laptop but how do I transfer iTunes music onto new laptop?
It just seem to be suggesting to reinstall the I.e. iPod which would mean that I lose all my music on it....THANK YOU.

Safari on iOS 5 uses tabbed browsing, not the thumbnail/paged browsing as on previous iOS versions - to open a new tab tap the '+' to the right of the tab bar, and to close the current tab tap the 'x' on its left-hand end (you can't close the last tab).
In terms of your music, then if you haven't got a backup of your library which you can copy onto your computer, then you should be able to copy your iTunes purchases from the iPad to your computer's iTunes via File > Transfer Purchases. For music bought from other sources or copied from your own CDs you will need to find a third-party program that can copy them off.

How to install window 7 or 8 in laptop without os..... and boot manager is missing and cd or dvd also in cd drive..????

Dear Sir Please Help me .....
I have Lenovo Laptop
I3 3rd generation, 2 GB RAM, 500 GB HDD, Integrated Graphic card.
this laptop have OS Window 7 and also is my mistake to format it....
then I install again but my system installation disk is 5 GB Only this again my mistake because in partion time I can 5 part
C - 5 GB
D - 146 GB
E - 200 Gb
and so on ...
But now I can't install in c because its only 5 Gb and I try to install other drive but system denied..
my laptop is without OS and also I can't install New OS in my laptop.....and also error is bootmanager is missing ........

Hi，
I think you can start your computer and long press F8 or other keys (depends on the PC model) to enter the BIOS, set the boot option, make the PC boot from CD\ROM Drive, then customize the installation, resize the partition, you can refer
to this video.
How to install and partition Windows 7
http://www.youtube.com/watch?v=PsveMWRdNxo
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Yolanda Zhu
TechNet Community Support

Adobe Bridge shortcut button missing in PS CS6 menu bar, how to install as in PS CS5 [essentials]

Adobe Bridge shortcut button missing in PS CS6 menu bar, how to install as in PS CS5 [essentials]

Yes, Bridge shortcut has been removed from PS CS5. However, you can go to File->Browse in Bridge option to open the file in Br CS6.
Similar query has been answered here.
http://forums.adobe.com/message/4285441

How do you find out which plugins firefox will install BEFORE you click 'install missing plugins'?

How do I determine which plugins firefox will install BEFORE I click 'install missing plugins'?
I don't just want to install some unknown plugins. Isn't there a way to determine the plugins that firefox will isntall? Can't it present me with a list of plugins that is going to be installed, before I click the button?

Did you look in the Windows Control Panel > Add / Remove Programs?
http://www.uninstallreview.com/Browsers/how-to-uninstall-Keep-Tube-for-Firefox_7005.html

Hi im from oman, muscat my friend and i bought ip5 last month her phone has facetime and mine is missing. I went back to Extra store and availed apple product packages but after availing t, facetime application was not installed.How to install facetime?

My serial number is C3******TWD, hi im from oman, muscat my friend and i bought ip5 last month her phone has facetime and mine is missing. I went back to Extra store and availed apple product packages but after availing t, facetime application was not installed.How to install facetime?
<Edited by Host>

Guys thank you so much for the advises and helps.. i went back to Extra store and finally they changed my unit to a new one..Now i can figured out which one has facetime or none, from the box itself at back it writtens arabic so definetely no facetime and if english, portugese and chinese characters has 100 % with facetime.. I'm so blessed that they agreed to changed my unit to new one. At first the manager opened four boxes of new unit for me to check if facetime is there and he reassured me there's new batch of iphone5 coming on 2nd day. So i went back and he changed it to new one.. .Now im satisfied..

How can I disable the Install Missing Plugin alert?

I just asked this, clicked on Post This Question, was told an email would be sent to me, but the email I see was sent 5 min. before I posted. So I'm posting this again. Sorry if it's a duplicate.
I use slow dial-up and can't keep any flash players on my computer. Every time I click on anything, even in my Yahoo! Mail homepage, this alert appears: Additional plugins are required to display all the media on this page. To the right is a link to Install Missing Plugins. I click the x to close it, and, when I click on something else, it appears again. It's very frustrating -- is there some way that I can disable this alert. I run Windows XP. If I have any of the plug-ins listed in the Installed plugins window below, I'm unaware of it, other than Adobe Acrobat 5.

Thanks for replying. However I have tried entering about:config in the address bar with no quotes, with three lines (copying what you typed), with a regular double lined quotes, and with single lined quotes. Each one opens a Google page. How do I get my computer to treat it as a request for the about:config page?
First I had to ask Google what a "location bar" is, and found that it's the address bar. So I did all this using the address bar, not the Google search bar to enter about:config. Please tell me what I'm doing wrong and how to correct it.

Missing libg2c.so , how to install it

as title , how to install libg2c.so in arch linux ?

Please don't crosspost: https://wiki.archlinux.org/index.php/Fo … ss-Posting
...and always search before posting: https://bbs.archlinux.org/viewtopic.php?id=44374

How to Install Windows 7 Without the Disc

1a) Here is very useful article from PCWorld.com. The article is entitled "How to Install Windows 7 Without the Disc" and means just what it says. The article also has links to Magical Jelly Bean Keyfinder and legitimate Windows 7 ISOs from Digital River, a licensed distributor of Microsoft software. The article lists "Step 1" as;
"Find your Windows 7 product key: Typically this 25-character alphanumeric string is printed on a sticker affixed to your PC or on documentation included with your PC. Alternatively, you can use a keyfinder program such as Magical Jelly Bean Keyfinder to pull your product key from the Registry. You need your product key to reinstall Windows."
1b) Using a key finder, however, is only useful if the Windows 7 product key was printed on a sticker (Microsoft Certificate of Authenticity) affixed to your PC, on documentation included with your PC, or sent via email by Microsoft. Assuming your computer came from one of the big brand computer manufacturers... HP, Sony, Dell, Gateway, etc... as most do, it uses a generic "mass activation" OEM SLP key. Trying to use this key by itself isn't going to work. This OEM SLP key needs to be mated with an OEM SLP certificate and an appropriate OEM BIOS with a proper SLIC table.
1c) Here is where ABR Beta With Windows 7 Support comes to the rescue. Follow the "How to use it" section of ABR for Windows Vista for information and instructions on how to use ABR. The steps listed for Vista apply to Windows 7 as well. Perform the "activation backup" to "backup" and save the OEM SLP key and OEM SLP certificate. Save the entire ABR folder to an external location for later use. This will allow you to pre-activate your "clean" Windows 7 install on the computer you pulled the key and certificate from.
1d) Now install Windows 7 from your new "Windows 7" disc or USB stick, following all prompts as needed. Don't enter a Windows 7 product key if request. Also, don't allow Windows to try to auto-activate. Once Windows is fully installed, run ABR "activation restore" to "restore" the previously backed up product key and certificate to the new Windows 7 install. Verify that Windows is activated, repeat "activation restore" if needed.
2) Here is another useful article, this time from SevenForums.com. This arcticle is entitled "Clean Reinstall - Factory OEM Windows 7" and provides detailed steps required to backup your computer, audit current hardware and software, locate software and drivers, install and activate Windows 7, and create a Windows 7 Backup Image of your fresh install.
Good luck.
Links to additional Windows 7 SP1 "Editions" and "Languages" can be found HERE and HERE.
Link to "ei.cfg Removal Utility". The "ei.cfg Removal Utility" is a simple tool that will remove the ei.cfg from any Windows ISO disc image, thereby converting the image into a "universal disc" that will prompt the user to select an edition during setup instead of being forced to use different discs for different versions of Windows 7.
Direct link to Windows 7 USB/DVD Download tool.
<Cross posted to Notebook Operating Systems and Software for Notebook, Laptop, and Netbook users>
EDITED by Frank on 8/28/2013
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

ervis,
Before formatting the hard drive you should have been able to use the HP Recovery Manager to create your recovery discs or perform a system recovery. This is provided the recovery partition wasn't already corrupt or damaged. If the "D:" HP Recovery partition is missing or damaged and you don't have a set of HP Recovery Discs, you will need to use the information in my previous post to get your computer up and running again.
The information in the document referred you to applies to several different "types" of installations;
Using ABRbeta is only needed if you have an active OEM factory SLP (system locked preactivated) installation of Windows. You use ABR to pull the factory key and certificate off the computer, to reuse it on the same computer with a clean Windows install.
If you are just installing Windows and are going to use the Windows 7 product key on the COA on the side of your computer, all you need to do is download the same version of Windows that your key is for and burn the ISO. Now install Windows answering or following all prompts as needed (except do not enter the Windows product at this time... it will be entered later). Once Windows has completely installed, enter the key and activate it. Your Windows 7 OA key should work on a SP1 install without issue.
The only thing I see that could mess things up, is the language of the install. If you are still having trouble activating Windows, please reference the ISO you download and a post a photo of your Windows COA
with the key erased or Xed out.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

How to Install Coldfusion 8 64-bit on Small Business Server 2008 64-bit

How to Install Coldfusion 8 64-bit on Small Business Server 2008 64-bit
I ran Coldfusion 8 on SBS 2003 Premium for 6 months with no problems. When we finally decided to cut over to SBS 2008, that’s when everything went to hell. I tried for weeks to get Coldfusion 8 to install properly on the new SBS 2008 64-bit box. During the course which, I found bits and pieces of information for Vista 64-bit and Windows Server 2008 64-bit installations. There are some distinct differences, however, with SBS 2008 since it runs core Web applications like OWA, RWW and Companyweb. After countless unsuccessful attempts, one of which completed corrupted the box, I found the solution.
I have attempted in this white paper to detail the steps to assist others who may be in a similar situation. I don’t make any warranty for the information, but so long as you follow the steps carefully you should be fine. BTW, for those of you who say Adobe offers free technical support for licensed users, that’s not entirely true. Like I said, I purchased CF8 and originally installed it on an SBS 2003 Premium box. After we cut over to SBS 2008 and encountered problems, Adobe wouldn’t provide any technical support without charging. Moreover, based on my initial conversations with Adobe’s technical team, no one seemed to know much about running 64-bit on SBS.
From my understanding, only two versions of Coldfusion 8 can be installed in 64-bit: Enterprise and Developer. The “normal” install (which I paid a grand for) can only be deployed in 32-bit mode – gee, THANKS Adobe! By the way, in Developer mode only two distinct IPs can access the site in addition to the localhost. Any additional IPs will result in a CFML error message stating that the maximum number of IPs have been exceeded. At any rate, take your time and follow the steps to achieve a successful installation.
PRE-INSTALLATION TASKS
Back Up SBS
It’s always a good practice to backup your server before deploying any kind of major system changes. Although this step is optional, I recommend it in case you need to restore your server for any reason. Bear in mind, if your system ever gets totally corrupted, you cannot restore back from the twice daily incremental backup images alone. You will need a full backup with system recovery information to restore. Here are the basic steps:
Click: Start > Programs > Administrative Tools. Right-click “Windows Server Backup” and choose “Run as administrator”.
Click “Backup Once” under Actions in the right-hand pane.
Choose the “Different Options” radio button under Backup Options.
Choose the “Custom” radio button. What we’re primarily interested in here is backing up the OS – not your data partitions or attached drives.
Select the “SYSTEM (C)” checkbox, uncheck any others. Also, ensure that the “Enable system recovery” checkbox is selected before continuing on.
Under ‘Specify Destination Type’, I usually select the “Local drives” radio button and point it to a Terrabyte USB drive I use for backups. You can point this to a tape drive, or select the “Remote shared folder” radio button if you map to a UNC path to store your backup images. Just remember, make sure that whatever path you select can readily be accessed in the event of an emergency. Also, make sure the “Verify after writing (recommended)” checkbox is selected.
Under ‘Specified Advanced Option’, I usually select the “VSS full backup” radio button instead of the default since I don’t use a 3rd party backup product. If like me you rely solely on SBS for your backups, choose the full backup option.
Confirm everything and click “Backup”. This process may take several hours depending on the size of your system.
Verify ISAPI Filters:
In IIS Manager, double-click the server instance in the left-hand pane.
In the center pane under IIS, double click the “Modules” icon to verify that the ISAPI native modules are already installed for IIS. If it’s set up correctly you should see two entries:
IsapiFilterModule %windir%\System32\inetsrv\filter.dll
IsapiModule %windir%\System32\inetsrv\isapi.dll
If either of these modules are missing, you will need to re-install these (google for a solution).
Set Up Development Environment
Create a directory for your CFML files outside of the default Windows location (e.g., default is usually C:\inetpub\wwwroot\). For the purpose of our install, I created a directory on a separate disk called: D:\DEV.
Copy and paste your CFML files and directories into the new DEV root Web directory. This will eventually be the directory where the Coldfusion installer places the CFIDE and CFDOCS folders.
Open IIS Manager and double-click the server instance in the left hand pane. Expand the “Sites” folder. Right-click the Sites folder and select “Add Web Site”.
Enter a name in the “Site Name” box (e.g., “test-site”). You will notice that the system will automatically create a corresponding Application Pool with the same name. NOTE: this is important to prevent conflicts between the DefaultAppPool (needed for SBS Web apps like OWA, RWW, etc.) and the application pool needed for Coldfusion to function properly in SBS 2008.
Point the “Physical Path” to the directory you created in step #1 above (e.g., “D:\DEV”).
Don’t worry about testing the connection. If you click “Test Settings” you may receive a warning that IIS cannot verify access to path (D:\DEV). Don’t worry about this for the time being.
Under “Host name”, enter a DNS path to your site (e.g., “dev.test-site.com”). Click “OK”.
Configure Application Pools for Installation
In IIS Manager, double-click the server instance in the left-hand pane. Click on “Application Pools” to display the list of server application pools in the center pane.
In the “Actions” pane on the right-hand side, click “Set Application Pool Defaults”.
Change “Enable 32-Bit Applications” - the second item from the top – from “False” to “True”, and then click “OK”. NOTE: if you skip this step, Coldfusion will not properly create the required mappings during the install. We will change this setting back after the installation completes – more on this later.
Modify the application.host.config File for 64-Bitness
Click: Start > Programs > Accessories. Right-click “Notepad” and choose “Run as administrator”.
Open the config file from within Notepad – default location: C:\Windows\System32\inetsrv\config\applicationHost.config
Do a search and change this one line from:
<add name="PasswordExpiryModule" image="C:\Windows\system32\RpcProxy\RpcProxy.dll" />
To this:
<add name="PasswordExpiryModule" image="C:\Windows\system32\RpcProxy\RpcProxy.dll" preCondition="bitness64" />
Restart the IIS Admin service.
Set HTTP Compression
According to some threads I read, the http compression module can cause errors if you don’t disable it globally. To remedy this, perform the following:
Click: Start > Programs > Accessories. Right-click “Command Prompt” and choose “Run as administrator”.
At the command prompt, change directory to intetsrv by typing: cd inetsrv
Run the following command:
C:\Windows\system32\inetsrv>appcmd.exe set config -section:system.webServer/httpCompression /-[name='xpress']
This will turn off HTTP compression for all sites in IIS.
In IIS Manager, double-click the server instance in the left-hand pane. Double-click the “Compression” icon in the IIS section of the center pane.
Uncheck all of the boxes, then click the “Apply” button under Actions in the right-hand pane.
Recheck all of the boxes, then click the “Apply” button under Actions in the right-hand pane.
Restart the IIS Admin service. This should enable compression and coldfusion to work at the same time.
NOTE: if for some reason you need to reverse this, run the following command from the command prompt:
C:\Windows\system32\inetsrv\appcmd.exe set config -section:system.webServer/httpCompression /+[name='xpress',doStaticCompression='false',dll='%windir%\system32\inetsrv\suscomp.dll']
INSTALLATION TASKS
Download the 64-bit installation package from Adobe – filename: coldfusion-801-wind64.exe.
Right-click the file and select “Run as administrator”.
Accept the terms of the License Agreement.
If you have an Enterprise license, enter it. For our purposes, just click the “Developer Edition” checkbox.
Select “Server configuration” – the default radio button.
I deselected all subcomponents and can’t guarantee that you’ll arrive at the same results if you select additional items like “.NET Integrated Services”. It should be fine, particularly if you install documentation. My preference was to keep the install as plain vanilla as possible.
Select the directory path for Coldfusion to install into – default is :C\Coldfusion
THE NEXT TWO STEPS ARE CRITICAL TO YOUR SUCCESS. Unselect “All IIS Websites” and select the “Configure specific IIS Website or another web server” radio button. Click “Add”, and then select your test Web site (e.g., “test-site”) under “IIS Web Site”. Hit “OK”.
Do NOT use the default directory path for the CF Administrator location (e.g., default path: “C:\inetpub\wwwroot”). Instead, point the installer to your new DEV root Web directory (e.g., “D:\DEV”). The bottom line, you want the installer to place the CFIDE directory and files within this folder, alongside your other CFML files and folders.
Enter an Administrator password.
Choose to Enable RDS, or not. I enable this by preference but it is not required. This allows you to make updates to files using a CFML editor directly vs. having to move/FTP the files over if you’re working remotely. Opponents to this argue that it’s potentially less secure, but for a lower environment I don’t see this as a major concern.
Confirm everything to kick off the install.
If all goes well you should see a message at the end stating that the install was successful. I recommend you uncheck the box that asks you to open the CF Administrator in the default Web browser after the install. NOTE: we will open it a different way during the post-installation tasks. The worst thing that will happen if you forget to uncheck the box is that you might receive an error that the command prompt hung – not a big deal – just close it and move on to the next (final) steps.
POST-INSTALLATION TASKS
Verify CF Installation:
The installation will create a new folder in your program group: Start > Programs > Adobe > Coldfusion 8. The default “Administrator” link will not work because it points to the wrong path: http://127.0.0.1/CFIDE/administrator/index.cfm. The “127.0.0.1” or “localhost” path as you may recall in IIS, points by default to the “C:\inetpub\wwwroot” directory. Our CFIDE files, however, are located within: D:\DEV.
To bring up the CF Administrator logon page, open up a Web browser and replace the “http://127.0.0.1” part of the path with the DNS path name to your CF environment (e.g., http://dev.test-site.com/CFIDE/administrator/index.cfm).
This should bring up the Coldfusion Administrator Login screen. Enter in the Administrator password you created during the install to log in and configure your application server.
Verify that your test-site renders correctly by typing in your test URL into a Web browser (e.g., http://dev.test-site.com).
Fix Application Pool Defaults to Re-enable SBS Web Applications:
At this point, Coldfusion Administrator and your test CMFL Web site should be working properly. The problem is, default SBS Web applications like OWA, RWW and Companyweb will throw errors and fail to start. Fortunately, this is easily remedied by performing the following steps:
In IIS Manager, double-click the server instance in the left-hand pane. Click on “Application Pools” to display the list of server application pools in the center pane.
In the “Actions” pane on the right-hand side, click “Set Application Pool Defaults”.
Change “Enable 32-Bit Applications” - the second item from the top – from “True” to “False” this time. This should re-enable the SBS applications, which would otherwise result in 500 errors (e.g., OWA, RWW, Companyweb, etc.). There is no need to restart IIS.
Open a Web browser and test that you can once again connect to OWA, RWW and Companyweb successfully.
In IIS click to highlight the application pool for your new site (e.g., “test-site”). In the right-hand pane, click “Advanced Settings”. Ensure that “Enable 32-Bit Applications” – second item from the top – is set to “True” for this application pool specifically.
Lastly, jump up and down for joy! Hopefully now, everything is working. Best of luck!! ..Paul D (MCP).

First, it would be a good idea for you to specify what distro of Linux you're using, as not all are supported by Adobe.
Second, this is probably your problem right here:
http://askubuntu.com/questions/40416/why-is-lib-libc-so-6-missing
In a nutshell, CF expects the 32-bit version of libc.so.6 to be in /lib, but it's probably not. You might be able to modify the installer to point to the correct location for that file, or you might be able to create a symlink to the file - but as the above link describes, creating a symlink might have negative consequences.
As for installing CF 8 64-bit, that's only available with Enterprise, not Standard. If you want CF Standard 64-bit, you need to upgrade to CF 9.
Dave Watts, CTO, Fig Leaf Software

How to install missing references

Similar Messages

Maybe you are looking for