How to install mod_perl in 9iAS and run perl ?

i am running 9iAS on winnt 4 , i want to install perl module in 9iAS and run oraperl / perl ? any ideas?
null

You may want to take a look at WebMin - besides an all-round great way to manage a server, it provides in depth tinkering w/Apache, albeit not so much for the faint-of-heart at times. You'll have loads of control over Apache, but deciding how to wield it can be intimidating until you've gotten settled in.
In any case, the things that are made easier far outweigh any learning curve on the few that demand more.

Similar Messages

How to install LV runtime engine and run .vi's in linux

I am attemtpting to load run time engine and run a .vi on Linux system.
Here is what I have done so far.
1. I don't have rpm on my system (gentoo) so I used the app on the install cd called INSTALL.norpm to install
labview70-rte-7.0.1.i386.rpm. It looks like it worked, there are a lot of files copied to /usr/local. A couple of .so files and a directory called Labview-7.0 (12M of files).
2. Made a test vi on other linux box that has full development system installed (also gentoo but i have rpm on this system).
    Do I need this application builder i keep hearing about to make an .exe or can I run vi's with this run time engine?
    What is the syntax to run a vi in linux? ./test.vi   ????
    Is application builder a seperate program that I must purchase?
When I attemp to run a vi I get garbage printing to the console, not unlike when you cat a binary file.
Any help would be appreciated. Is there instructions somewhare??? A manual perhaps that explains rte install and operation.
D.A.M.

You need the application builder to create an exe. The rte by itself will not run a VI. The exe does require the rte. It is possible to create a "loader" program that you can use to run separate VIs but the loader program must be created with the app builder. The app builder is a separate add-on or if you buy the professional version of LabVIEW, it comes included with that.

CAN I INSTALL BOTH (ORACLE 9IAS AND ORACLE DATABASE )INTO SAME MACHINE.

oracle 9ias and oracle 9i database in same machine Feb 25, 2003 11:22 PM
Reply
Dear Friends,
I installed oracle 9ias. and then i hosted my form,report into that server . All was working properly.
at this time my database was into another machine.
then i installed oracle 9i database into the same machine
(as the oracle 9ias was installed)
at the instalation of oracle 9i database one error comes
and shows that Agent configuration Assistant Installation
fail.
but After installation of database it work properly.
there is no problem.
but when I try to run from through web(by using oracle 9ias)
it gives Internal error(500).
i check and find that my appache server for 9ias is working properly and in services of windows 2000 no error comes.
HOW CAN I INSTALL BOTH (ORACLE 9IAS AND ORACLE DATABASE )INTO SAME MACHINE.
With regards
Siddharth Singh
[email protected]

Hi James,
Have u ever tried ORACLE 9iAS R2 on Redhat Linux ?
If yes what is the version of RH Linux you were using ?
Any docs for that ?
[email protected]
Regards
Amudharasu

How to install ias 1.0 and 8.1.6.1 on a single red hat 6.1 machine

How to install ias 1.0 and 8.1.6.1 on a single red hat 6.1 machine.
i am expecting a lot of problems during the ias installation, the db is working fine. is posible to install both products over the same machine?

You should be able to iAs and the DB on the same machine but you will need to do the following:
1. Create a new ORACLE_HOME for iAS (unsetenv ORACLE_HOME and setenv ORACLE_HOME to new home)
2. Shutdown the DB in the existing Oracle home and change the corresponding listener port in listener.ora to a port other than the typical default (1521)
3. Install iAS in the new Oracle home
4. Make sure none of the listeners in the listener.ora under the new Oracle home are listening on the same port as that which you set for the existing DB listener.
In general it is advisable to install iAS EE on a different machine than the origin database to realize the full benefits of iCache (EE)

How to install Workshop for WebLogic and WebLogic Portal?

Hi All,
I am new to Weblogic Portal. I would like to start learning Oracle Weblogic Portals..
Can anyone please guide me, how to install Workshop for WebLogic and WebLogic Portal?
As per the ""Tutorials – Getting Started with WebLogic Portal"" (http://download.oracle.com/docs/cd/E13155_01/wlp/docs103/tutorials/setup_dev_env.html)
we need to install the Workshop for WebLogic and WebLogic Portal.
Please suggest me where should i get the required environments/IDE?
Thanks,
Harish.

Hi Harish
1. If this is your first time with Weblogic Portal, I would recommend to download the latest Weblogic Portal Software Rel 10.3.2 from this bottom link. Check Accept Radio button, for windows download windows installer. Its about 1 GB file. This software includes Eclipse IDE, Weblogic Server and Weblogic Portal.
http://www.oracle.com/technology/software/products/wlp/index.html
2. During the installation process, make sure at one point you select Custom mode (NOT default Typical mode). In next following screens you will see all bundles checked EXCEPT for Samples. So make sure you check Samples Check box both under Weblogic Server and Weblogic Portal. Then proceed. This will install full Weblogic Workshop (Eclipse IDE), Weblogic Server and Weblogic Portal. This is the good installation package. Also it will install samples for Portal and Server. If you select all default typical mode, it will NOT install samples. You can install samples later on also, but its good at installation time itself you select custom and check Samples also.
3. WLP 10.3.2 uses Eclipse IDE. If you are familiar with Eclipse IDE this should be helpful. Otherwise also, its ok.
4. For learning WLP, in Eclipse IDE, you need to create Portal EAR Project, then Portal Web Project. Inside portal web project create simple jsp hello world portlets and a simple portal.
5. For Deploying and Testing Portal application you need to create Portal Domain using config wizard. You can see this from Start -> Programs -> Oracle Weblogic Portal shortcut -> Weblogic Server -> Tools -> Configuration Wizard.
6. You can start Workshop IDE from Start -> Program Files -> Oracle Weblogic Portal ...-> Eclipse For Weblogic 10.3.2
Here are the links for quick start guide for portal development. Please do refer them.
http://download.oracle.com/docs/cd/E13155_01/wlp/docs103/tutorials/index.html
http://download.oracle.com/docs/cd/E13155_01/wlp/docs103/quickstart/newproject.html
HTH
Ravi Jegga

How to install struct2 in netbeans and eclipse

how to install struct2 in netbeans and eclipse

Hi ganesh_delhi1980,
It's Struts 2 and not struct2.
You may verify what version of Struts is already installed on your IDE, you may also download and install packages :
- NetBeans : Tools > Plugins
- Eclipse : Help > Software updates...

How to install the windows7 agent and monitor the same machine

Hi ,
I have installed OMS on Oracle Linux 5.7-64 bit machine. Now I am able monitor the OIM which is installed on Linux. I have some of oracle applications (domains) on windows7 machine. I want monitor the same. On em, agent deployment page I am not able to see the windows agents.
Can you please guide me how to install the agent on windows and monitor the same?
OEM version: 11.1.0.1
Thanks in advance
Regards,
Kishore Tummeti

If you just need to install some agents on Windows the best (imho) option is not to use the push option because getting Cygwin to run can take hours (if at all).
Here you find a good instruction how to install the agent by hand: http://www.peasland.net/?p=122
Sometimes the –silent mentioned in step 4b needs not to be put as second argument but as last argument.
Eric

How to install my onboard Networkcard and where do i find the drivers?

I have updated my computer with some hardware and i now need to install the sound and network drivers again. I think i found the sound drivers but i cant find the network driver. Anyone got a link for me? And how do you install these drivers? Just run the installfile and everything goes automatic or is it more complicated?
Btw: I have Windows XP on a 40gb harddisk and a maxtor 300gb harddisk on secondary master. But in windows xp it only show 127gb (i think i was). Why?
Thanks for all the help.
BTW: If anyone got any other nice pages to get my mainboard up to speed, bring it:)

Quote from: needahand on 06-October-05, 22:39:40
But in windows xp it only show 127gb (i think i was).
Windows needs SP1 or greater to recognize drives larger than 137GB. Install SP1 or SP2 and partition the remaining space via disk management.
And we can't give you any info on the network card without knowing what motherboard it is.
Good Luck
Jeremy

How to test oracle is up and running in remote machine using shell script

Hello,
I need help to write an linux script.
I have a java application server running on machine 192.168.5.20 and our oracle 10g standard 1.0.2 is running on machine 192.168.5.21.
I have found script to start oracle when computer is turned on.
But I cannot start my application server automatically since it depends on whether oracle is up and running or not on the remote machine.
Therefore, in case of power failure or maintenance, our client has to call us to start application server.
I would be grateful if someone can help me "How can I write script to check oracle is up and running in machine 192.168.5.21 from machine 192.168.5.20.
For your information, I have no oracle installed in application server. So tnsping won't work.
What I want is when power is back, application server script automatically and tesing for oracle server is up and running. If it is up, script will start application server.
Thanking you.

Hi,
It's not failover or experimental. My application server uses JBOSS and JBOSS needs database name to start up. My enviroment is LAN. My database is in different machine as I mentioned before. So In case of power failure, I need to start my application server (JBoss) manually, because I need to confirm that oracle is already running before start app server.
I want an automated script (when power is just on) to start my application server which will wait to check if the datbase server is up I will start application server.
The scripts given above It works if appserver and db server in the same machine (my development machine).
But when I test the script in my production applicaiton server, It shows sqlplus command not found (my app server does not have any oracle client installed).
About hostname yes My applicaiton server hostname is hostapp1 and dabase server hostname is hostdat1.
Do you think Is it possible to test the script without oracle client not installed. or It has to be done writing code like java program and test using jdbc connection.
Best regards.

How to Deploy Forms on web and Run report in Web browser

Hi all,
I am wondering how to run forms from the web and run report on web .. can u pl. brief me out and tell any source if i can reach and study...

You have to install Oracle Forms server and Oracle reports server. Download the documentation about these products from Forms
OTN site.

How to install BPEL on WLS and JDEV 11g/WLS

Can somebody pls point me to a paper "How to install BPEL (Designer, Server, etc.) on WLS" ?!
I downloaded 80 MB BPEL (Orabpel_10133_WebLogic.zip), unzipped it, but it does not container a "read.me"...
I like to install the BPEL part for the JDEV - is that the right one ?
Or do I need to install the whole SOA Suite (incl. BPEL Server) (570 MB) - but this seem to be based on OC4J?
The core question: which (download) components do I need to install BPEL on WLS to make it run and usable ?
TIA
Bernhard

Here is the readme you may be after
http://download.oracle.com/docs/cd/E10291_01/doc.1013/e12534/toc.htm
This is an old release. There is now 10.1.3.4, but I don't believe the stand alone BPEL is supported. You need to install the full SOA Suite. The doc for this is
http://download.oracle.com/docs/cd/E12524_01/core.1013/e13058/toc.htm
You need to install the Oracle version first then port it. This is all changing in 11g, hopefully due soon.
I recommend the latter as it provides more functionality around patching.
Also SOA Suite or BPEL is on certified against 9.2 not 10.3 so you cannot use it against JDev 11g. Your JDev version must be in sync with your SOA Suite version.
cheers
James

How to Migrate to to web and run the report in web by default

Hi everybody,
Anyone Please help me out...
1. How to Migrate from Report2.5 to Report 9i
(ie. Character mode to web mode to support Mouse)
2. When I run the report9i from forms or directly from the report builder using the short cut key "Ctrl+R" I want it to run in the web by default.
3. How could I run the Report9i from the Command prompt
thanks in advance...
Regards
Vadivelan.P

You have to install Oracle Forms server and Oracle reports server. Download the documentation about these products from Forms
OTN site.

HT5639 if i use boot camp to establish windows on my Macbook pro can i then install a windows program and run it without another software ie parallels?

Can I use a windows program such as QuickBooks on my macbook pro 15inch with only using boot camp or do i need to have another program?

Boot Camp is everything you need to run a Windows application.
Boot Camp allows you to install Windows in a second volume, so you can start up there and run all your Windows apps without needing any Mac OS X app. It's true that OS X apps like Parallels or VMware Fusion allow you to use your Boot Camp partition in Mac OS X, but it looks like you don't want that

P55-CD53, how to install SATA AHCI drivers and Matrix Storage Manager?

Please excuse my noobness as this is for my first PC build and much of it is Greek to me, but could someone please inform/educate me as to what the following drivers (link) are for and which need to be installed after a fresh installation of Windows 7 Pro x64? Do I need to install all of them because some of these appear to be redundant, just from different manufacturers, or am I mistaken? I have a single 500GB HDD but will probably add more down the road.
JMicron JMB36x IDE Drivers (including floppy driver)
Description   XP/Vista/Win7 Ver: 17.49.04.WHQL
Update Date   2009-07-27
Your System OS   XP/Vista/Win7 32/64bit
(3989KB)
Intel P55 AHCI / RAID Drivers
Description   Ver: 8.9.0.1023
Update Date   2009-07-24
Your System OS   XP/Vista/Win7 32/64bit
(23048KB)
Intel P55 SATA RAID Driver (For floppy driver)
Description   Intel P55 SATA RAID driver
1. Extract the file and Copy all files to the floppy.
2. Press F6 to install driver through the floppy when booting and loading RAID function.
Update Date   2009-07-24
Your System OS   XP/Vista/Win7 32/64bit
(443KB)
JMicron IDE/SATA RAID Drivers (with AP)
Description   XP/Vista Driver Version: 1.17.43.05
For floppy install:
Please copy all the directories and files in the "floppy" folder to the root directory of a floppy disk to create a pre-install disk for Win2K/WinXP/Win2003/WinXP 64bits/Win2003 64bits.
For example,
A:\amd64
\x32
txtsetup.oem
To enhance IDE transfer speed, we strongly recommend you install JMicron IDE/SATA Driver.
Update Date   2009-02-23
Your System OS   Windows Vista 32/64bit
(4032KB)
Windows XP 32bit
(4032KB)
Intel TPM Device Driver
Description   Intel Trusted Platform chipset driver
XP/Vista/Win7: 2.00.0000.00
Update Date   2007-11-02
Your System OS   Vista/Win7 32/64bit
(23KB)
Windows XP 32bit
(23KB)
On a side note, I have already flashed the BIOS to 1.4 using the Forum USB Flashing Tool (thanks!).

Thanks.
After booting from the Windows 7 disc, I selected Repair Windows, Load Drivers. Which specific controllers do I need to install for the P55-CD53 MB since there are multiple controllers listed for each of the four SATA compressed files?
Considering the multiple files and multiple controllers, is there no one out there with a P55-CD53 that has AHCI mode enabled that can give dumbed down instructions on how to do so?
The manual states "Select the appropriate RAID controller and press enter." Well... which one is the appropriate controller? Am I suppose to load the driver for all the AHCI controllers if that's even possible?
For the Intel P55 AHCI / RAID Drivers compressed file, these are the controllers available within F6flpy64\iaAHCI.inf:
Intel(R) ESB2 SATA AHCI Controller
Intel(R) ICH 10D/DO SATA AHCI Controller
Intel(R) ICH10R SATA AHCI Controller
Intel(R) ICH7M/MDH SATA AHCI Controller
Intel(R) ICH7R/DH SATA AHCI Controller
Intel(R) ICH8M-E/M SATA AHCI Controller
Intel(R) ICH8R/DH/DO SATA AHCI Controller
Intel(R) ICH9M-E/M SATA AHCI Controller
Intel(R) ICH9R/DO/DH SATA AHCI Controller
Intel(R) PCH SATA AHCI Controller
Intel(R) PCHM SATA AHCI Controller 4 Port
Intel(R) PCHM SATA AHCI Controller 6 Port
Also, regarding the dual BIOS controls for SATA/IDE/RAID settings previously mentioned, I believe SATA ports 1-6 are controlled via Intel and 7,8 are controlled via Jmicron. Considering my HDD is currently plugged into SATA 1, Jmicron probably isn't necessary for the moment.
Edit:
Turns out that none of the drivers for the controllers listed in iaAHCI.inf could be installed. However, I went ahead and installed the drivers listed for all the controllers in iaStor.inf. I reinstalled Windows 7 to get rid of the BSOD. I then installed the chipset drivers and Intel Matrix Storage Manager.

How to compile other java files and run them from my own programs?

I'm developing a unit testing tool for AspectJ, which can originally generate the stubs for aspect unit to be tested. All these stubs are java files. After generation of stubs, how can I program the code to compile this unit together with these stubs, i.e. how can I put the functionality of compilation and run, e.g. command "javac *.java" and "java *", into my own code.
Hope you can understand what I mean.
Thank you in advance.

When I use Runtime.getRuntime().exec(command) for executing the AspectJ compile command "ajc", "IOException createProcess error=2" always occurs, while it is ok for Java comiple command "javac".
Why this happens when I use Runtime.getRuntime().exec("ajc Hello.java Test.aj")? Is it the reason that Runtime.exec(String) may not support any command in DOS?
(ajc is the compile command for the java file and aj file.)
Thank you in advance.

How to install mod_perl in 9iAS and run perl ?

Similar Messages

Maybe you are looking for