How to install Movable Type?

I want to move a Movable Type installation from a Linux server to OS X Server (Mountain Lion, Server 2.1.1).  However, it appears that the standard httpd.conf file is not to be touched, and the preferred method is to make changes to some subordinate file.  Has anyone installed Movable Type on Mountain Lion server, and if so, how and where did you enter the settings to allow the cgi and php to function proeprly?
Thanks in advance for any information.

Hi
the configuration template is only visible, if the usage type "DI" is active for the system. Note 1142136 explains how to activate usage types manually. Should work for 7.10/7.11, too.
Regards
Michael

Similar Messages

  • How To Install Live Type In 10.8.3

    Hi My self Varun, My English is not Good.
    I am using 10.8.3
    and i have Final Cut Studio 2.0 (48.52 GB)
    1st i installed rosetta from my 10.6 installer
    In 10.6 DVD there is a folder name Optional Installs.mpkg, run it and install rosetta, bcoz FCS 2 works with power pc and rosetta is a part of Power pc.
    install rosetta.
    Then Run FCS 2
    first this window will open
    Press OK
    then this window is open
    and finaly this window will appear
    If u need only Live Type so uncheck the otheres, then install it.
    After installing Live Type there is no live font in it, So you have to Run the other components of Live Type from FCS 2 folder
    and Enjoy!

    1.  REMOVE ROSETTA from your Mountain Lion Mac IMMEDIATELY:
    https://discussions.apple.com/message/22013952#22013952
    2.  Use Pacifist to install FCS2 into Mt. Lion:
    http://www.charlessoft.com/
    or
    3.  Use Terminal to install FCS2 into Mt. Lion:
    http://www.jeremyjohnstone.com/blog/2012-03-11-installing-final-cut-pro-studio-2 -0-on-mac-os-x-10-7-lion.html

  • How to install device type via AIX client

    Hello,
    I would like to install a printer device type PRI file to the SAP system via an AIX client. Would appreciate some detailed steps and assistance.
    Using: SAP R/3, OS AIX ver 5.3. TL 7
    Thank you.

    > Hi, Thank you for the information, but I am not able to download the SAP Note 6427.
    > Reason: I do not have the username and password.
    - start transaction SE38
    - execute the program RSTXSCRP
    - press on the button with the "i" to get the documentation
    Markus

  • How to install Live Type in FCPX ?

    Hi there,
    During my FCE4 days, LiveTpye comes pre-installed and I even purchased some of their Expansion Packs.
    Now that I am usinf FCPX and suddenly I need some of the effects from LiveType, how do I use this LiveType in FCPX ?
    Any ideas ?
    Thanks

    I haven't tested it properly  but it opens and the animated fonts appear to work so I would imagine everything else will.
    It's only a tiny app even with the fonts etc. so it won't take 5 minutes to load  .  .  .  then you can find out for yourself. 
    iDVD also works pefectly in Mountain Lion and produces the best quality DVDs that I know, and to anyone about to tell me DVDSP is better, I can only say that my hi-def videos put onto standard DVD are better and more artifact free than anything I achieved in DVDSP in over 4 years of use and experimenting.

  • How to install Additional Software Units or Usage Types in an Existing SAP

    Hi.
    We have a Netweaver 7.0 EPH1 with JAVA, EP and EPC intallation,but i need install additional usage type BI JAVA and NWDI.
    Copy the downloaded SCAs in /usr/sap/trans/EPS/in and when execute JSPM - option Additional usage type installation,  this not show usages type .
    according to the installation guide, this is the procedure.
    please help me.
    Thanks very much.
    Regards,
    Jhon Jairo

    Hi,
    Once you have correctly extracted and put the files in /usr/sap/trans/EPS/in, you need to run JSPM and select the option of additional usage types.
    Next, select the desired stack from the inbox. Click Next.
    JSPM shows the currently installed usage types and those of the new usage types in the stack, which are part of the active product on the system and all of their dependencies are fulfilled. They can have different status:
    Available u2013 the usage type is already active in the system. These usage types are automatically skipped.
    OK u2013 the usage type can be installed on the system. Specify whether to install or skip the usage type in the Action column.
    Revise u2013 the usage type cannot  be installed on this system. Click the Show Details button for more information. These usage types are automatically skipped.
    Not Supported - the usage type is not supported by JSPM.
    Can you tell us what is the status of the usage types visible to you? Are the new usage types having a different status or are they not completely visible at all? If that is the case, you may want to check whether the files that you have downloaded are correct or not and also check whether these are correctly extracted and placed in the right folder.
    Regards,
    Shitij

  • How Install Adobe Type Manager On 32 bit system

    Installing Adobe Type Manager on 32 bit system gives error message saying need 16 bit system.

    Thank you very very much.  I bought these fonts from Adobe many years ago on a 3.5 inch disk which I still have.  I assumed they were Adobe fonts.  I have saved the disk contents on my network drive.  I could use the Control Panel install from my network drive using my 6 year old desk top computer running Windows XP Professional Version 2002 Service Pack 3.
    The Add Fonts from the control panel on my Lenovo SL510 running the same level Windows would allow me to point to the Font directory on the network drive but would not list the fonts.  I had to move the the fonts into a newfont directory under C:\Windows.  Then the Add Fonts would list the fonts and install them.  I add all this because there have been over 130 views of this subject.
    The question is Answered.  Thank you.

  • How to Install DBD::mysql on Mac OSX 10.4.7 SERVER Universal

    I spent 3 days trying to figure out how to install DBD::mysql on OSX 10.4.7 Server Universal on my Mac Pro.
    I didn't think it would be so hard just to get it installed so I could use Movable Type. Yikes!
    Anyway, I wrote up a tutorial on what I did to get it installed. Hopefully it will help you out if you are having problems installing DBD::mysql on Server 10.4.7 Universal with a Mac Pro.
    DISCLAIMER: I cannot say whether or not this will work with any other version of Server or Macintosh. Inside the article below is a link to how to install DBD::mysql on other versions of OSX that may or may not work for you.
    http://macnewsblog.com/2006/09/howto_install_dbdmysql_onmac.html
    MacBook Pro 15" Mac OS X (10.4.6)

    Hopefully this worked for those with Mac Pros!

  • How to Install Coldfusion 8 64-bit on Small Business Server 2008 64-bit

    How to Install Coldfusion 8 64-bit on Small Business Server 2008 64-bit
    I ran Coldfusion 8 on SBS 2003 Premium for 6 months with no problems.  When we finally decided to cut over to SBS 2008, that’s when everything went to hell.  I tried for weeks to get Coldfusion 8 to install properly on the new SBS 2008 64-bit box.  During the course which, I found bits and pieces of information for Vista 64-bit and Windows Server 2008 64-bit installations.  There are some distinct differences, however, with SBS 2008 since it runs core Web applications like OWA, RWW and Companyweb.  After countless unsuccessful attempts, one of which completed corrupted the box, I found the solution.
    I have attempted in this white paper to detail the steps to assist others who may be in a similar situation.  I don’t make any warranty for the information, but so long as you follow the steps carefully you should be fine.  BTW, for those of you who say Adobe offers free technical support for licensed users, that’s not entirely true.  Like I said, I purchased CF8 and originally installed it on an SBS 2003 Premium box.  After we cut over to SBS 2008 and encountered problems, Adobe wouldn’t provide any technical support without charging.  Moreover, based on my initial conversations with Adobe’s technical team, no one seemed to know much about running 64-bit on SBS.
    From my understanding, only two versions of Coldfusion 8 can be installed in 64-bit: Enterprise and Developer.  The “normal” install (which I paid a grand for) can only be deployed in 32-bit mode – gee, THANKS Adobe!  By the way, in Developer mode only two distinct IPs can access the site in addition to the localhost.  Any additional IPs will result in a CFML error message stating that the maximum number of IPs have been exceeded.  At any rate, take your time and follow the steps to achieve a successful installation. 
    PRE-INSTALLATION TASKS
    Back Up SBS
    It’s always a good practice to backup your server before deploying any kind of major system changes.  Although this step is optional, I recommend it in case you need to restore your server for any reason.  Bear in mind, if your system ever gets totally corrupted, you cannot restore back from the twice daily incremental backup images alone.  You will need a full backup with system recovery information to restore.  Here are the basic steps:
    Click: Start > Programs > Administrative Tools.  Right-click “Windows Server Backup” and choose “Run as administrator”.
    Click “Backup Once” under Actions in the right-hand pane.
    Choose the “Different Options” radio button under Backup Options.
    Choose the “Custom” radio button.  What we’re primarily interested in here is backing up the OS – not your data partitions or attached drives.
    Select the “SYSTEM (C)” checkbox, uncheck any others.  Also, ensure that the “Enable system recovery” checkbox is selected before continuing on.
    Under ‘Specify Destination Type’, I usually select the “Local drives” radio button and point it to a Terrabyte USB drive I use for backups.  You can point this to a tape drive, or select the “Remote shared folder” radio button if you map to a UNC path to store your backup images.  Just remember, make sure that whatever path you select can readily be accessed in the event of an emergency.  Also, make sure the “Verify after writing (recommended)” checkbox is selected.
    Under ‘Specified Advanced Option’, I usually select the “VSS full backup” radio button instead of the default since I don’t use a 3rd party backup product.  If like me you rely solely on SBS for your backups, choose the full backup option.
    Confirm everything and click “Backup”.  This process may take several hours depending on the size of your system.
    Verify ISAPI Filters:
    In IIS Manager, double-click the server instance in the left-hand pane.
    In the center pane under IIS, double click the “Modules” icon to verify that the ISAPI native modules are already installed for IIS.  If it’s set up correctly you should see two entries:
    IsapiFilterModule              %windir%\System32\inetsrv\filter.dll
    IsapiModule                        %windir%\System32\inetsrv\isapi.dll
    If either of these modules are missing, you will need to re-install these (google for a solution).
    Set Up Development Environment
    Create a directory for your CFML files outside of the default Windows location (e.g., default is usually C:\inetpub\wwwroot\).  For the purpose of our install, I created a directory on a separate disk called: D:\DEV.
    Copy and paste your CFML files and directories into the new DEV root Web directory.  This will eventually be the directory where the Coldfusion installer places the CFIDE and CFDOCS folders. 
    Open IIS Manager and double-click the server instance in the left hand pane.  Expand the “Sites” folder.  Right-click the Sites folder and select “Add Web Site”.
    Enter a name in the “Site Name” box (e.g., “test-site”).  You will notice that the system will automatically create a corresponding Application Pool with the same name.  NOTE: this is important to prevent conflicts between the DefaultAppPool (needed for SBS Web apps like OWA, RWW, etc.) and the application pool needed for Coldfusion to function properly in SBS 2008.
    Point the “Physical Path” to the directory you created in step #1 above (e.g., “D:\DEV”).
    Don’t worry about testing the connection.  If you click “Test Settings” you may receive a warning that IIS cannot verify access to path (D:\DEV).  Don’t worry about this for the time being.
    Under “Host name”, enter a DNS path to your site (e.g., “dev.test-site.com”).  Click “OK”.
    Configure Application Pools for Installation
    In IIS Manager, double-click the server instance in the left-hand pane.  Click on “Application Pools” to display the list of server application pools in the center pane.
    In the “Actions” pane on the right-hand side, click “Set Application Pool Defaults”.
    Change “Enable 32-Bit Applications” - the second item from the top – from “False” to “True”, and then click “OK”.  NOTE: if you skip this step, Coldfusion will not properly create the required mappings during the install. We will change this setting back after the installation completes – more on this later.
    Modify the application.host.config File for 64-Bitness
    Click: Start > Programs > Accessories.  Right-click “Notepad” and choose “Run as administrator”.
    Open the config file from within Notepad – default location: C:\Windows\System32\inetsrv\config\applicationHost.config
    Do a search and change this one line from:
    <add name="PasswordExpiryModule" image="C:\Windows\system32\RpcProxy\RpcProxy.dll" />
    To this:
    <add name="PasswordExpiryModule" image="C:\Windows\system32\RpcProxy\RpcProxy.dll" preCondition="bitness64" />
    Restart the IIS Admin service.
    Set HTTP Compression
    According to some threads I read, the http compression module can cause errors if you don’t disable it globally. To remedy this, perform the following:
    Click: Start > Programs > Accessories.  Right-click “Command Prompt” and choose “Run as administrator”.
    At the command prompt, change directory to intetsrv by typing: cd inetsrv
    Run the following command:
    C:\Windows\system32\inetsrv>appcmd.exe set config -section:system.webServer/httpCompression /-[name='xpress']
    This will turn off HTTP compression for all sites in IIS.
    In IIS Manager, double-click the server instance in the left-hand pane.  Double-click the “Compression” icon in the IIS section of the center pane.
    Uncheck all of the boxes, then click the “Apply” button under Actions in the right-hand pane.
    Recheck all of the boxes, then click the “Apply” button under Actions in the right-hand pane.
    Restart the IIS Admin service.  This should enable compression and coldfusion to work at the same time.
    NOTE: if for some reason you need to reverse this, run the following command from the command prompt:
    C:\Windows\system32\inetsrv\appcmd.exe set config -section:system.webServer/httpCompression /+[name='xpress',doStaticCompression='false',dll='%windir%\system32\inetsrv\suscomp.dll']
    INSTALLATION TASKS
    Download the 64-bit installation package from Adobe – filename: coldfusion-801-wind64.exe.
    Right-click the file and select “Run as administrator”.
    Accept the terms of the License Agreement.
    If you have an Enterprise license, enter it.  For our purposes, just click the “Developer Edition” checkbox.
    Select “Server configuration” – the default radio button.
    I deselected all subcomponents and can’t guarantee that you’ll arrive at the same results if you select additional items like “.NET Integrated Services”.  It should be fine, particularly if you install documentation.  My preference was to keep the install as plain vanilla as possible.
    Select the directory path for Coldfusion to install into – default is :C\Coldfusion
    THE NEXT TWO STEPS ARE CRITICAL TO YOUR SUCCESS.  Unselect “All IIS Websites” and select the “Configure specific IIS Website or another web server” radio button.  Click “Add”, and then select your test Web site (e.g., “test-site”) under “IIS Web Site”.  Hit “OK”.
    Do NOT use the default directory path for the CF Administrator location (e.g., default path: “C:\inetpub\wwwroot”).  Instead, point the installer to your new DEV root Web directory (e.g., “D:\DEV”).  The bottom line, you want the installer to place the CFIDE directory and files within this folder, alongside your other CFML files and folders.
    Enter an Administrator password.
    Choose to Enable RDS, or not.  I enable this by preference but it is not required.  This allows you to make updates to files using a CFML editor directly vs. having to move/FTP the files over if you’re working remotely.  Opponents to this argue that it’s potentially less secure, but for a lower environment I don’t see this as a major concern.
    Confirm everything to kick off the install.
    If all goes well you should see a message at the end stating that the install was successful.  I recommend you uncheck the box that asks you to open the CF Administrator in the default Web browser after the install.  NOTE: we will open it a different way during the post-installation tasks.  The worst thing that will happen if you forget to uncheck the box is that you might receive an error that the command prompt hung – not a big deal – just close it and move on to the next (final) steps.
    POST-INSTALLATION TASKS
    Verify CF Installation:
    The installation will create a new folder in your program group: Start > Programs > Adobe > Coldfusion 8.  The default “Administrator” link will not work because it points to the wrong path: http://127.0.0.1/CFIDE/administrator/index.cfm. The “127.0.0.1” or “localhost” path as you may recall in IIS, points by default to the “C:\inetpub\wwwroot” directory.  Our CFIDE files, however, are located within: D:\DEV.
    To bring up the CF Administrator logon page, open up a Web browser and replace the “http://127.0.0.1” part of the path with the DNS path name to your CF environment (e.g., http://dev.test-site.com/CFIDE/administrator/index.cfm).
    This should bring up the Coldfusion Administrator Login screen.  Enter in the Administrator password you created during the install to log in and configure your application server.
    Verify that your test-site renders correctly by typing in your test URL into a Web browser (e.g., http://dev.test-site.com).
    Fix Application Pool Defaults to Re-enable SBS Web Applications:
    At this point, Coldfusion Administrator and your test CMFL Web site should be working properly.  The problem is, default SBS Web applications like OWA, RWW and Companyweb will throw errors and fail to start.  Fortunately, this is easily remedied by performing the following steps:
    In IIS Manager, double-click the server instance in the left-hand pane.  Click on “Application Pools” to display the list of server application pools in the center pane.
    In the “Actions” pane on the right-hand side, click “Set Application Pool Defaults”.
    Change “Enable 32-Bit Applications” - the second item from the top – from “True” to “False” this time.  This should re-enable the SBS applications, which would otherwise result in 500 errors (e.g., OWA, RWW, Companyweb, etc.).  There is no need to restart IIS.
    Open a Web browser and test that you can once again connect to OWA, RWW and Companyweb successfully.
    In IIS click to highlight the application pool for your new site (e.g., “test-site”).  In the right-hand pane, click “Advanced Settings”.  Ensure that “Enable 32-Bit Applications” – second item from the top – is set to “True” for this application pool specifically.
    Lastly, jump up and down for joy!  Hopefully now, everything is working.  Best of luck!! ..Paul D (MCP).

    First, it would be a good idea for you to specify what distro of Linux you're using, as not all are supported by Adobe.
    Second, this is probably your problem right here:
    http://askubuntu.com/questions/40416/why-is-lib-libc-so-6-missing
    In a nutshell, CF expects the 32-bit version of libc.so.6 to be in /lib, but it's probably not. You might be able to modify the installer to point to the correct location for that file, or you might be able to create a symlink to the file - but as the above link describes, creating a symlink might have negative consequences.
    As for installing CF 8 64-bit, that's only available with Enterprise, not Standard. If you want CF Standard 64-bit, you need to upgrade to CF 9.
    Dave Watts, CTO, Fig Leaf Software

  • How to install memory modules on a macbook pro 15"

    I run Windows 7 via parallels desktop on my macbook pro. How do I type special characters on a Word document using the mac keyboard?

    how to install memory modules on a macbook pro 15"
    Read the manual / user guide that came with your comptuer or download it from http://support.apple.com/manuals/
    I run Windows 7 via parallels desktop on my macbook pro. How do I type special characters on a Word document using the mac keyboard?
    Post your question on the Paralells forums:  http://forums.parallels.com

  • How to install Windows 7/Vista as 2nd OS and retain predesktop environment (service partition)

    This is a step-by-step instruction how to install Windows Vista or Windows 7 as a second OS on a Lenovo Thinkpad that originally shipped with Windows XP AND how to retain the access to the Lenovo Service Partition.
    I have been searching the internet for instructions like these but could not find anything useful. So I am posting it
    here. Maybe this helps other users.
    I have tested the procedure below with installation of Windows Vista Ultimate (64bit) and Windows 7 Ultimate (64bit). I believe that the procedure will also work with the 32bit versions of these OSs. I am not totally convinced that this works when the OS to install is Windows XP (64bit or 32bit). XP has a completely different boot sequence compared to Vista or 7. The basic steps would remain the same, but the XP setup is less forgiving when it finds an unknown partition. If somebody wants to try it out, please post your results as a reply to this forum entry.
    Never never never try to install an older OS (like Windows 2000 or NT) as a second OS when XP is already installed! This is doomed to fail.
    The procedure below does NOT work for Linux installations. I am not a Linux wizard, but any Linux bootmanager I know about is incompatible with the Lenovo Service Partition.
    The procedure was tested on a Thinkpad R61 model 8918-B9G. It should work similar on other models.
    You definitely need a service partition with Rescue&Recovery version 4. It will NOT work with older versions of R&R or if the service partition is not a type12 partition (see below how to find out about that).
    I assume that the harddisk partitions are unmodified, i.e. still have factory settings. This is likely the case if you
    never attempted any OS install or recovery action. If this is not the case, the procedure may or may not work.
    You also need a bootable CD with a tool that can change the size of your current system partition. I was using gparted live version 0.5.2-9. ( http://gparted.sourceforge.net/ )
    Everything you do is at your own risk. I am in no way related to Lenovo, other than being a customer using their
    products.
    Step 1) Make a full backup of your harddisk. Get yourself recovery CDs for your Thinkpad model if you don't have any. The changes we are about to make can completely screw up your harddrive. A typo is sufficient for that to happen.
    Step 2) Power on the system. Check that you can boot into the Service Partition by pressing the Thinkvantage button when the startup screen appears. (Older systems may have a differently named button.) If there is a problem booting the service partition now, it is likely that the rest of this procedure will not fix it.
    Step 3) From the service partition choose 'Warmstart' to reboot the system. Reboot Windows XP, logon.
    Open a command prompt. CD to the following directory:
    \Program Files\Common Files\Lenovo\BMGR
    On a german language system (like mine) it is
    \Programme\Gemeinsame Dateien\Lenovo\BMGR
    If you have an older IBM system the directory may be named
    \Program Files\Common Files\IBM\BMGR
    or something like that. Maybe you need to search around.
    In the following, I will call this the "BMGR dir".
    Enter the following command:
    bmgr32 /info /v
    You should get an output similar to this:
    C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /info /v
    It's a Lenovo  MBR
    Opened Master Boot Record to see whose MBR it is.
    It's a Lenovo MBR
    Opened drive for reading
    Partition 0 the SP? no, type 0x07 is not correct
    Partition 1 the SP? (512)  Label is SERVICEV
    Using version 2.05 of Lenovo Boot Manager
    Reading: \\.\PHYSICALDRIVE0
            MBR Sector 1 Index: 1   Checksum: 00    Disabled
            MBR Sector 2 Index: 4   Checksum: 03    Passed
            MBR Sector 3 Index: 5   Checksum: FD    Passed
            MBR Sector 4 Index: 6   Checksum: 58    Passed
            MBR Sector 5 Index: 7   Checksum: 96    Passed
            MBR Sector 6 Index: 8   Checksum: 7F    Passed
            Data Sector  Index: 3   Checksum: F1    Passed
            Original MBR Index: 2   Checksum: BD    Passed
            No Patch Sectors
            Checksum Byte: 00
            Think Flag: 1
            WinPE Partition (0-3): 1        Alt Boot Partition (0-3): 1
            Boot Config: 2 (Service Partition containing two Service OS's)
            Boot State: 0                   Alt Boot Flag: 0
            (Normal booting operation, will boot to Customer OS)
            RRU: 00000000 00000000          Prev Active Part: 255
            Previous Partition Type: FF     Patch IN: 0     OUT: 0
            CIRT Disabled
            TOC: 0000000000000000           Lock: 0
            Show Error: 0                   Halt on Error: 0
            CIRT Load Return: 0
            CIRT Execute Return: 0
            Pause Duration: 10              Scan Code: 0085
            F11 Msg: To boot to the Rescue and Recovery Environment, Press F11
            Check Msg: There has been a signature failure
     #  active  type      start CHS      end CHS      startLBA       size
     0   0x80   0x07      1   1   0   239 255 255           63    301296177
     1   0x00   0x12      0 193 255   239 255 255    301296240     11279520
     2   0x00   0x00      0   0   0     0   0   0            0            0
     3   0x00   0x00      0   0   0     0   0   0            0            0
    C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
    The important thing to look for is the 0x12 partition type in the partition table at the bottom. This is the service
    partition. If you do not have a 0x12 partition, then you can stop here because the rest of the procedure will not work
    for you.
    Step 4) Shutdown and boot gparted from CD. Shrink the system partition to the desired size. Do NOT touch the service partition! Do NOT attempt to create another partition! Leave the new white space on the disk untouched! Apply changes and restart the system.
    Step 5) Reboot XP. gparted has set the NTFS dirty bit. This will cause XP to run a full CHKDSK. Depending on how much files there are on the partition this may take considerable time. Let CHKDSK run to completion. When CHKDSK finishes, the system will automatically reboot.
    Step 6) XP reboots now. Logon. When loading the desktop, XP will show a popup window, stating that system settings have been changed and new devices been discovered and that the system should be rebooted. This is ok. XP actually recognized the shrunk system partition and applied the necessary changes to its own system parameters. Click YES to reboot the system.
    Step 7) XP reboots. Logon. Open a command prompt, CD to the BMGR dir and enter:
    bmgr32 /info /v
    The output you get should be similar to the output you have seen in step 3, except that the partition 0 size column
    shows a smaller value.
    Step 8) Shutdown, restart. Check that you can still access the service partition by pressing the blue Thinkvantage button when the system startup screen appears.
    Step 9) From the predesktop environment choose warmstart. Reboot XP. Logon, logoff, shutdown.
    DO NOT SKIP THIS STEP!!! If you start the Windows Vista/7 install right after shutting down from the predesktop
    environment, the Win Vista/7 setup program will screw up your harddisk! The Lenovo MBR bootmgr reboot takes two steps for completion. The first step is the shutdown and the second step is executed when booting from harddisk. A boot from the Windows CD will skip this second step and disaster finds its way...
    Step 10) Insert the Windows Vista/7 DVD and boot it. Start the setup. Choose "Custom (advanced)" install. It will show the partitions on the disk. Select the white space (unallocated). Click on "disk options (advanced)". Click on "New" to create a new partition in the white space. Keep the default size, click "Apply". Click "Format". A popup window appears stating that the partition may hold OEM data. Continue. Click "Next". Installation starts.
    Continued in the second post...

    Step 11) Win Vista/XP will reboot several times during installation. You will always see the Windows bootmanager with an entry for "Earlier Windows version" and "Windows Vista/7". DO NOT DARE to touch the blue Thinkvantage button on any reboot or press any function keys!
    Step 12) When the installation is finished, check that you can successfully reboot Win Vista/7 by selecting it from the Windows bootmanager.
    Step 13) Reboot XP by choosing "Earlier Windows version" from the Windows bootmanager. Open a command prompt. CD to the BMGR dir. Enter the following command:
    bmgr32 /info /v
    The output will now look like this:
    C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /info /v
    Opened Master Boot Record to see whose MBR it is.
    Opened drive for reading
    Partition 0 the SP? no, type 0x07 is not correct
    Partition 1 the SP? no, type 0x07 is not correct
    Partition 2 the SP? (512)  Label is SERVICEV
     #  active  type      start CHS      end CHS      startLBA       size
     0   0x80   0x07      1   1   0   254 255 255           63    109675692
     1   0x00   0x07    239 255 255   239 255 255    109676544    191619072
     2   0x00   0x12    239 255 255   239 255 255    301296240     11279520
     3   0x00   0x00      0   0   0     0   0   0            0            0
    C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
    startLBA and size will of course differ, depending on the actual partition sizes you have set. Note that Windows setup moved the service partition to entry 2 of the partition table. If you do not see the 0x12 partition then stop here.
    Otherwise the following step will likely screw up you harddisk.
    Enter the following command (case sensitive?):
    bmgr32 /Fbootmgr.bin /m0 /IBM /v
    The output will look like this:
    C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /Fbootmgr.bin /m0 /IBM /v
    installing MBR
    finding free sectors
    Sector 9 is free
    Sector 10 is free
    Sector 11 is free
    Sector 12 is free
    Sector 13 is free
    Sector 14 is free
    Sector 15 is free
    Sector 16 is free
    Opened Master Boot Record to see whose MBR it is.
    It's a Lenovo MBR
    Opened drive for reading
    Partition 0 the SP? no, type 0x07 is not correct
    Partition 1 the SP? no, type 0x07 is not correct
    Partition 2 the SP? (512)  Label is SERVICEV
    Setting Think bit
    C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
    This command reinstalled the Lenovo bootmanager in the MBR that was erased by the Win Vista/7 setup program.
    Enter the following command:
    bmgr32 /info /v
    The output will now look like this:
    C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /info /v
    It's a Lenovo  MBR
    Opened Master Boot Record to see whose MBR it is.
    It's a Lenovo MBR
    Opened drive for reading
    Partition 0 the SP? no, type 0x07 is not correct
    Partition 1 the SP? no, type 0x07 is not correct
    Partition 2 the SP? (512)  Label is SERVICEV
    Using version 2.05 of Lenovo Boot Manager
    Reading: \\.\PHYSICALDRIVE0
            MBR Sector 1 Index: 1   Checksum: 00    Disabled
            MBR Sector 2 Index: 11  Checksum: 03    Passed
            MBR Sector 3 Index: 12  Checksum: FD    Passed
            MBR Sector 4 Index: 13  Checksum: 58    Passed
            MBR Sector 5 Index: 14  Checksum: 96    Passed
            MBR Sector 6 Index: 15  Checksum: 7F    Passed
            Data Sector  Index: 10  Checksum: 01    Passed
            Original MBR Index: 9   Checksum: 12    Passed
            No Patch Sectors
            Checksum Byte: 00
            Think Flag: 1
            WinPE Partition (0-3): 2        Alt Boot Partition (0-3): 2
            Boot Config: 0 (Service Partition containing one Service OS)
            Boot State: 0                   Alt Boot Flag: 0
            (Normal booting operation, will boot to Customer OS)
            RRU: 00000000 00000000          Prev Active Part: 255
            Previous Partition Type: FF     Patch IN: 0     OUT: 0
            CIRT Disabled
            TOC: 0000000000000000           Lock: 0
            Show Error: 0                   Halt on Error: 0
            CIRT Load Return: 0
            CIRT Execute Return: 0
            Pause Duration: 10              Scan Code: 0085
            F11 Msg: To boot to the Rescue and Recovery Environment, Press F11
            Check Msg: There has been a signature failure
     #  active  type      start CHS      end CHS      startLBA       size
     0   0x80   0x07      1   1   0   254 255 255           63    109675692
     1   0x00   0x07    239 255 255   239 255 255    109676544    191619072
     2   0x00   0x12    239 255 255   239 255 255    301296240     11279520
     3   0x00   0x00      0   0   0     0   0   0            0            0
    C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
    So you have actually regained the Lenovo bootmanager. But you are not done yet.
    Step 14) Shutdown. Restart the system. DO NOT PRESS THE BLUE THINKVANTAGE BUTTON AT THE SYSTEM STARTUP SCREEN!!! IT DOES NOT WORK YET! When the system startup screen DISAPPEARS, quickly press F11 (maybe several times). The system should now boot the predesktop environment from the service partition.
    Step 15) When the predesktop is there, choose "warmstart". When the system startup screen appears, press the blue Thinkvantage button. The system should again boot into the predesktop. The blue Thinkvantage button now works permanently.
    Step 16) Check that you can boot Win XP and Win Vista/7 from the Windows bootmanager. You're done!

  • How to install wireless on a Satellite 5200-903?

    Due to a very bad virus I recovered Windows on a Satellite 5200-903 of a friendly businessman. But back home he saw: no wireless LAN could be used... It seems, that cause the WLAN-switch was "off" no WLAN-driver was installed/recovered...
    Now he wants to come to me again tomorrow or the day after tomorrow - and I MUST know, how to install everything until then... he also will bring me his router, so I can configure everything for him on the notebook AND router (WPA, if possible).
    But I found TWO drivers: one was a direct download of a small file of "Agere" - wlesslan-xp-7620390.zip
    The other is from "Atheros", and the download is a links to another website "Toshiba EMEA - Wireless LAN Driver Portal" http://aps2.toshiba-tro.de/wlan/?page=downloads , where I have to identify the WLAN adapter... But: on the first download-site (I mean BEFORE redirected to "Toshiba EMEA") there is at the list "Model" NOT any Satellite 5200.
    Which driver is correct? Are there different WLAN-adapters in the 5200-903 series? Is it possible to find out the adapter model BEFORE he gives me the Notebook?
    And in the list of drvers for the 5200-903 there was a download "WLAN hotkey" wlkey-xp-2003.zip ? Do I need that too? Do I need any other things?
    And does such an "older" WLAN-Access work in another way than the integrated WLAN of a centrino e.g. ? I just know how to log into a WLAN with newer notebooks: button "wireless networks" on the right buttom oft windows, then chose the WLAN name to connect and type in the key, if needed.
    Please help me, he lives 100 miles away from me and has not much time, he comes again to me just for that matter, and of course he was not amused when he returned home and couldn't connect to the internet... and he's an ABSOLUTE noob in technical things, so I cannot tell him how to do it on his own and need your help quickly.
    Thanks a lot!

    Hello Herb
    I just want to make the whole story short and simply. After installing OS install drivers for hardware components. According the notebook specification for Satellite 5200-903 it is WLAN ready model and I do not know which WLAN card is inside. You friend should have info about that.
    If there is Atheros WLAN card the right driver you can find HERE
    After driver installation install all Toshiba designed tools and utilities starting with COMMON MODULES. It must be installed at first. WLAN-hotkey utility is important because using FN+F8 key combination you can enable/disable WLAN card.
    WLAN software (Atheros WLAN client utility) is not necessary because for WLAN you can use WXP WLAN settings. You can use it if the WLAN card is activated properly.
    So I hope you will set WLAN properly and if you need more assistance please write again.
    Bye and good luck!

  • How to install the Remote Desktop Services role on a Windows 2012 R2 Server

    Hello,
    I am a bit confused on how to install the RDP role on a 2012 R2 server. I have a two server domain and would like to make the second member server an RDP server to host applications (Word, Excel, a medical software, etc.) where users from their windows
    7 desktop will use the Remote Desktop Connection to connect to the server, create a session and do their work. When installing the role, I am prompted with two options:
    1- Role-based or feature based installation
    2- Remote Desktop services installation
    I see the RDP install option in both cases.
    1- Which one do I use?
    2- What role services do I install? (Connection broker, Gateway, Licensing, Session Host, Virtualization host and Web access). I think I need the first four only.
    3- When installing software after RDP, I use the Change user /install and Change user /execute commands. What happens to the software that is already installed? Can remote
    users use those?
    Any help will be very much appreciated.
    Thank You,
    Victor.

    TP,
    Thank you for your response. I added the RD Licensing thru the Role-based option.
    Also opened the local group policy thru gpedit.msc and added the server name and the licensing mode type to Computer Configuration -> Administrative Templates -> Windows Components -> Remote Desktop Services -> Remote Desktop Session
    Host -> Licensing
    Use the specified RD license servers = NameOfMyServer
    Set the Remote Desktop licensing mode = TypeOfMyLicense (Per User in my case)
    Thank you again,
    Victor

  • How to install MSFT application security updates in cab file format using DISM

    Hi,
    I tried to install security updates for MS Office which are cab files like any other windows security updates cab file. It is giving an error called "file not found". But other windows security updates cab files are installing fine without any error.
    I tried to install these updates manually using DISM on commandline. It is not installing. I even tried using pkgmgr.exe, but that is not working either. I looked at DISM logs which is saying it failed opening the cab file. I tried different other commandline
    options of DISM to install this, but nothing else is suitable for a cab file install.
    Does anyone know how to install a cab file for application security updates via DISM.exe or other MSFT commandline tools?
    Thanks,
    ANSA
    DISM log:
    =======
    2015-02-25 14:42:59, Info                  DISM   PID=4916 Scratch directory set to 'C:\Windows\TEMP\'. - CDISMManager::put_ScratchDir
    2015-02-25 14:42:59, Info                  DISM   PID=4916 Successfully loaded the ImageSession at "C:\Windows\System32\Dism" - CDISMManager::LoadImageSession
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Failed to get and initialize the PE Provider.  Continuing by assuming that
    it is not a WinPE image. - CDISMProviderStore::Final_OnConnect
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Manager: PID=4916 Successfully created the local image session and provider store. - CDISMManager::CreateLocalImageSession
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE:
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: <----- Starting Dism.exe session ----->
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE:
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Host machine information: OS Version=6.1.7601, Running architecture=amd64, Number of processors=4
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Executing command line: "C:\Windows\System32\Dism.exe" /online /add-package /packagepath:"C:\ProgramData\Application
    Data\Autonomic\ANSA Patch Manager\_Installs\mscomctlocx-x-none_8699d53bec82460b948612f4f35d2f6a0ad018f4.cab" /ignorecheck /norestart
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Getting Provider FolderManager - CDISMProviderStore::GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Provider has not previously been encountered.  Attempting to initialize the
    provider. - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Loading Provider from location C:\Windows\System32\Dism\FolderProvider.dll - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Connecting to the provider located at C:\Windows\System32\Dism\FolderProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Getting Provider FolderManager - CDISMProviderStore::GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Manager: PID=4916 Successfully loaded the ImageSession at "C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B"
    - CDISMManager::LoadImageSession
    2015-02-25 14:42:59, Info                  DISM   DISM Image Session: PID=11836 Instantiating the Provider Store. - CDISMImageSession::get_ProviderStore
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Initializing a provider store for the IMAGE session type. - CDISMProviderStore::Final_OnConnect
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has not previously been encountered.  Attempting to initialize the
    provider. - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Loading Provider from location C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\OSProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Connecting to the provider located at C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\OSProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2015-02-25 14:42:59, Info                  DISM   DISM OS Provider: PID=11836 Defaulting SystemPath to C:\ - CDISMOSServiceManager::Final_OnConnect
    2015-02-25 14:42:59, Info                  DISM   DISM OS Provider: PID=11836 Defaulting Windows folder to C:\Windows - CDISMOSServiceManager::Final_OnConnect
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Attempting to initialize the logger from the Image Session. - CDISMProviderStore::Final_OnConnect
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has not previously been encountered.  Attempting to initialize the
    provider. - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Loading Provider from location C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\LogProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Connecting to the provider located at C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\LogProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Getting Provider OSServices - CDISMProviderStore::GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has not previously been encountered.  Attempting to initialize the
    provider. - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Loading Provider from location C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\PEProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Warning               DISM   DISM Provider Store: PID=11836 Failed to Load the provider: C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\PEProvider.dll.
    - CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Failed to get and initialize the PE Provider.  Continuing by assuming that
    it is not a WinPE image. - CDISMProviderStore::Final_OnConnect
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Manager: PID=4916 Image session successfully loaded from the temporary location: C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B
    - CDISMManager::CreateImageSession
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Getting Provider OSServices - CDISMProviderStore::GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  CSI    00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
    : got STATUS_OBJECT_PATH_NOT_FOUND
    2015-02-25 14:42:59, Info                  CSI    00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
    : got STATUS_SUCCESS
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Target image information: OS Version=6.1.7601.17592, Image architecture=amd64
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Getting the collection of providers from an image provider store type. - CDISMProviderStore::GetProviderCollection
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has not previously been encountered.  Attempting to initialize the
    provider. - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Loading Provider from location C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\CbsProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Connecting to the provider located at C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\CbsProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2015-02-25 14:42:59, Info                  CSI    00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
    : got STATUS_OBJECT_PATH_NOT_FOUND
    2015-02-25 14:42:59, Info                  CSI    00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
    : got STATUS_SUCCESS
    2015-02-25 14:42:59, Info                  DISM   DISM Package Manager: PID=11836 Finished initializing the CbsConUI Handler. - CCbsConUIHandler::Initialize
    2015-02-25 14:42:59, Info                  CSI    00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
    : got STATUS_OBJECT_PATH_NOT_FOUND
    2015-02-25 14:42:59, Info                  CSI    00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
    : got STATUS_SUCCESS
    2015-02-25 14:42:59, Info                  DISM   DISM Package Manager: PID=11836 CBS is being initialized for online use. More information about CBS actions can
    be located at: %windir%\logs\cbs\cbs.log - CDISMPackageManager::Initialize
    2015-02-25 14:42:59, Info                  DISM   DISM Package Manager: PID=11836 Loaded servicing stack for online use only. - CDISMPackageManager::RefreshInstanceAndLock
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has not previously been encountered.  Attempting to initialize the
    provider. - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Loading Provider from location C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\MsiProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Connecting to the provider located at C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\MsiProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has not previously been encountered.  Attempting to initialize the
    provider. - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Loading Provider from location C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\IntlProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Connecting to the provider located at C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\IntlProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has not previously been encountered.  Attempting to initialize the
    provider. - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Loading Provider from location C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\DmiProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Connecting to the provider located at C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\DmiProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2015-02-25 14:42:59, Info                  CSI    00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
    : got STATUS_OBJECT_PATH_NOT_FOUND
    2015-02-25 14:42:59, Info                  CSI    00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
    : got STATUS_SUCCESS
    2015-02-25 14:42:59, Info                  DISM   DISM OS Provider: PID=11836 Successfully loaded the hive. - CDISMOSServiceManager::DetermineBootDrive
    2015-02-25 14:42:59, Info                  DISM   DISM Driver Manager: PID=11836 Further logs for driver related operations can be found in the target operating
    system at %WINDIR%\inf\setupapi.offline.log - CDriverManager::Initialize
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has not previously been encountered.  Attempting to initialize the
    provider. - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Loading Provider from location C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\UnattendProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Connecting to the provider located at C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\UnattendProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has not previously been encountered.  Attempting to initialize the
    provider. - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Loading Provider from location C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\SmiProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Connecting to the provider located at C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\SmiProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has not previously been encountered.  Attempting to initialize the
    provider. - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Loading Provider from location C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\TransmogProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Connecting to the provider located at C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\TransmogProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Getting Provider DISM Package Manager - CDISMProviderStore::GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Getting Provider DISM Unattend Manager - CDISMProviderStore::GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Got the collection of providers. Now enumerating them to build the command table.
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Package Manager
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: DISM Package Manager.
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: OSServices
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: MsiManager
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: MsiManager.
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: IntlManager
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: IntlManager.
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DriverManager
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: DriverManager.
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Unattend Manager
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: DISM Unattend Manager.
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Log Provider
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: SmiManager
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: Edition Manager
    2015-02-25 14:42:59, Info                  DISM   DISM Transmog Provider: PID=11836 Current image session is [ONLINE] - CTransmogManager::GetMode
    2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: Edition Manager.
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Getting Provider DISM Package Manager - CDISMProviderStore::GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has previously been initialized.  Returning the existing instance.
    - CDISMProviderStore::Internal_GetProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Package Manager: PID=11836 Processing the top level command token(add-package). - CPackageManagerCLIHandler::Private_ValidateCmdLine
    2015-02-25 14:42:59, Info                  DISM   DISM Package Manager: PID=11836 Attempting to route to appropriate command handler. - CPackageManagerCLIHandler::ExecuteCmdLine
    2015-02-25 14:42:59, Info                  DISM   DISM Package Manager: PID=11836 Routing the command... - CPackageManagerCLIHandler::ExecuteCmdLine
    2015-02-25 14:42:59, Info                  DISM   DISM Package Manager: PID=11836 Encountered the option "packagepath" with value "C:\ProgramData\Application
    Data\Autonomic\ANSA Patch Manager\_Installs\mscomctlocx-x-none_8699d53bec82460b948612f4f35d2f6a0ad018f4.cab" - CPackageManagerCLIHandler::Private_GetPackagesFromCommandLine
    2015-02-25 14:42:59, Error                 DISM   DISM Package Manager: PID=11836 Failed opening package. - CDISMPackageManager::Internal_CreatePackageByPath(hr:0x80070002)
    2015-02-25 14:42:59, Error                 DISM   DISM Package Manager: PID=11836 Failed to get the underlying CBS package. - CDISMPackageManager::OpenPackageByPath(hr:0x80070002)
    2015-02-25 14:42:59, Error                 DISM   DISM Package Manager: PID=11836 Failed to open the package at location: "C:\ProgramData\Application Data\Autonomic\ANSA
    Patch Manager\_Installs\mscomctlocx-x-none_8699d53bec82460b948612f4f35d2f6a0ad018f4.cab" - CPackageManagerCLIHandler::ProcessPackagePath(hr:0x80070002)
    2015-02-25 14:42:59, Error                 DISM   DISM Package Manager: PID=11836 Failed while processing command add-package. - CPackageManagerCLIHandler::ExecuteCmdLine(hr:0x80070002)
    2015-02-25 14:42:59, Info                  DISM   DISM Package Manager: PID=11836 Further logs for online package and feature related operations can be found at
    %WINDIR%\logs\CBS\cbs.log - CPackageManagerCLIHandler::ExecuteCmdLine
    2015-02-25 14:42:59, Error                 DISM   DISM.EXE: DISM Package Manager processed the command line but failed. HRESULT=80070002
    2015-02-25 14:42:59, Info                  DISM   DISM Image Session: PID=11836 Disconnecting the provider store - CDISMImageSession::Final_OnDisconnect
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Finalizing the servicing provider(DISM Package Manager) - CDISMProviderStore::Internal_DisconnectProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Package Manager: PID=11836 Finalizing CBS core. - CDISMPackageManager::Finalize
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Disconnecting Provider: DISM Package Manager - CDISMProviderStore::Internal_DisconnectProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Found the OSServices.  Waiting to finalize it until all other providers are
    unloaded. - CDISMProviderStore::Final_OnDisconnect
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Finalizing the servicing provider(MsiManager) - CDISMProviderStore::Internal_DisconnectProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Disconnecting Provider: MsiManager - CDISMProviderStore::Internal_DisconnectProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Finalizing the servicing provider(IntlManager) - CDISMProviderStore::Internal_DisconnectProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Disconnecting Provider: IntlManager - CDISMProviderStore::Internal_DisconnectProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Found the PE Provider.  Waiting to finalize it until all other providers
    are unloaded. - CDISMProviderStore::Final_OnDisconnect
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Finalizing the servicing provider(DriverManager) - CDISMProviderStore::Internal_DisconnectProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Disconnecting Provider: DriverManager - CDISMProviderStore::Internal_DisconnectProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Finalizing the servicing provider(DISM Unattend Manager) - CDISMProviderStore::Internal_DisconnectProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Disconnecting Provider: DISM Unattend Manager - CDISMProviderStore::Internal_DisconnectProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Found the OSServices.  Waiting to finalize it until all other providers are
    unloaded. - CDISMProviderStore::Final_OnDisconnect
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Finalizing the servicing provider(SmiManager) - CDISMProviderStore::Internal_DisconnectProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Disconnecting Provider: SmiManager - CDISMProviderStore::Internal_DisconnectProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Finalizing the servicing provider(Edition Manager) - CDISMProviderStore::Internal_DisconnectProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Disconnecting Provider: Edition Manager - CDISMProviderStore::Internal_DisconnectProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Releasing the local reference to OSServices. - CDISMProviderStore::Internal_DisconnectProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Disconnecting Provider: OSServices - CDISMProviderStore::Internal_DisconnectProvider
    2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Releasing the local reference to DISMLogger.  Stop logging. - CDISMProviderStore::Internal_DisconnectProvider
    2015-02-25 14:43:00, Info                  DISM   DISM.EXE: Image session has been closed. Reboot required=no.
    2015-02-25 14:43:00, Info                  DISM   DISM.EXE:
    2015-02-25 14:43:00, Info                  DISM   DISM.EXE: <----- Ending Dism.exe session ----->
    2015-02-25 14:43:00, Info                  DISM   DISM.EXE:
    2015-02-25 14:43:00, Info                  DISM   DISM Image Session: PID=4916 Disconnecting the provider store - CDISMImageSession::Final_OnDisconnect
    2015-02-25 14:43:00, Info                  DISM   DISM Provider Store: PID=4916 Disconnecting Provider: FolderManager - CDISMProviderStore::Internal_DisconnectProvider
    2015-02-25 14:43:00, Info                  DISM   DISM Provider Store: PID=4916 Found the OSServices.  Waiting to finalize it until all other providers are
    unloaded. - CDISMProviderStore::Final_OnDisconnect
    2015-02-25 14:43:00, Info                  DISM   DISM Provider Store: PID=4916 Releasing the local reference to DISMLogger.  Stop logging. - CDISMProviderStore::Internal_DisconnectProvider

    You need to extract and install it - Refer this link
    http://blogs.technet.com/b/askcore/archive/2011/02/15/how-to-use-dism-to-install-a-hotfix-from-within-windows.aspx
    Regards Chen V [MCTS SharePoint 2010]

  • How to install Firewire?

    Hi,
    I am getting problem with my Power Mac G5.
    So many times i get message on screen "Restart your computer by pressing power key..."
    So, some buddy suggests me to install & upgrade latest Fire wire from Apple.com/download.
    But i don't know how to install Fire Wire on Mac G5?
    Also My Finder shut down automatically without giving any message. I don't know why?
    Can you guys please help me solving this problem?
    I appreciate your efforts.
    Thanks.
    Mac G5   Mac OS X (10.4.9)  

    Definitely look at Roam's suggestions.
    Another way to help fix problems on Macs is to get Applejack...
    http://www.versiontracker.com/dyn/moreinfo/macosx/19596
    After installing, reboot holding down CMD+s, then when the prompt shows, type in...
    applejack AUTO
    Then let it do all 5 of it's things.
    At least it'll eliminate some questions if it doesn't fix it.

  • In OBIEE 11g How to Change  Import Type Local Machine to Remote Machine

    Hi All,
    I Have Installed OBIEE 11g Client tools in my Machine and server is in Other Server.when i tried to Import metadata i am getting Connection Falied error.
    When i tried to import metadata in import type option i can see only one option Local Machine that is also in Disable mode.
    how to make import type option to Remote.
    Thanks and Regards
    Kiran Kumar

    In BI EE 10g, there was no Oracle Client bundled along with BI EE. So, BI EE will use your Oracle DB Home client to connect to the database. So, when you try to connect to the database through the Repository or BI Server, it will try to find the tnsnames entry in the Oracle Client of BI EE 11g instead of your database. There are 2 options to work around this
    Copy your tnsnames.ora and Paste it to
    1. Drive:Oracle\Middleware\Oracle_BI1}network\admin
    2 Drive:Oracle\Middleware\oracle_common\network\admin
    TNS File like,
    DBName =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = Your Server IP)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = DBName)
    Thanks,
    Balaa...

Maybe you are looking for

  • To change order of columns in a table

    Hi All, I have a table with structure like idx varchar2(250), name varchar2(250), dept varchar2(250) required idx varchar2(250), dept varchar2(250), name varchar2(250) table is created just want to change the order? dont want to drop and recreate tab

  • What do I gain by installing more ram ?

    Hi ! I would like to know what are the advantages of installing more ram on my powerbook ? Would installing an additionnal 512 mb ram or 1gb ram speed up the idvd compression to dvd ? More generally while I gain performance on game graphics or video

  • Creating custom hierarchical data provider

    Hi, I'm trying to create a custom dataprovider for a 3rd party chart control. As far as I can tell, it works just like any Flex-provided hierarchical dataprovider control. My problem doesn't have to do with the control directly, as I haven't yet even

  • Some update failed to install question

    The error message is:   Photoshop 12.0.4 update for Photoshop CS5   Installation failed What am I supposed to do next?  I have tried reboot my Window 7 PC and this has not resolved this issue. No other error message.

  • Writeable pdf online or on ipad

    We have SAP generate a writeable PDF that we want to use online or on ipad. Ipad is currently (also when using Adobe Acrobat Reader) not opening the document .. need some help