How to install msp files

Since installing Adobe CS4 on a Windows 7 computer, autoupdate stopped working including Acrobat.
So I downloaded update patches from acrobat site: http://www.adobe.com/downloads/updates/.
All patches were in msp format. When I clicked on msp files, I am getting an error (see the attachment).
Please advise me how to update Acrobt with msp files.
(Note; I posted the similar queston to Photoshop forum. I did not get any answer. So I am posting to the right forum).
hummer

Dear Neelam Y,
Thank you for your reply. You are correct. I downloaded a map file for Acrobat Pro Extended by a mistake. I don't know what the difference is between Arobat Pro and Acrobat Pro Extended. There are too many lingo for Adobe programs. Anyway, I was able to update Acrobat 9.13 patch.
From the adobe download site (see the attachment Adobe download.png), I dowloaded AcrobatUpd930_all_incr.msp (Adobe Acrobat 9.3 Pro and Standard Update - Multiple Languages) file thinking that this is an update file for v. 9.3. This file did not indicate that it is for Acrobat Pro Entended. When I clicked on the 9.3 pro msp fiel, I am getting the same error (see the attachment adobe error.png). What should Ido to install Acrobat 9.3 pro?
Thank you again.

Similar Messages

How to Install .CAP file in the Java Card?

Hi Friends..
How to install *.CAP* file in the Java Card?..
I've GPShell script as follows :
mode_211
enable_trace
establish_context
card_connect -readerNumber 2
open_sc -security 1 -keyind 0 -keyver 0 -mac_key 404142434445464748494a4b4c4d4e4f -enc_key 404142434445464748494a4b4c4d4e4f
install_for_load -pkgAID a00000006203010c01 -nvCodeLimit 500 -sdAID A000000003000000
load -file HelloWorld.cap
card_disconnect
release_contextwith that script i can load HelloWorld.cap file successfully..
Now, how to install the HelloWorld.cap file?..
if i add script : load -file HelloWorld.cap i got this error :
install -file HelloWorld.cap
file name HelloWorld.cap
Command --> 80E602001B09A00000006203010C0107A00000015100000006EF04C60201A80000
Wrapped command --> 84E602002309A00000006203010C0107A00000015100000006EF04C60201
A80030C859793049B85300
Response <-- 6985
install_for_load() returns 0x80206985 (6985: Command not allowed - Conditions of
use not satisfied.)i ask this question because when i tried to select the applet through its AID, by this script :
establish_context
card_connect -readerNumber 2
select -AID a00000006203010c0101i got this message error : select_application() returns 0x80216A82 (6A82: The application to be selected could not be found.)
but there's exactly any that AID in my Java Card..
here's is the list of AID from My Java Card :
C:\GPShell-1.4.2>GPShell listgp211.txt
mode_211
enable_trace
establish_context
card_connect -readerNumber 3
* reader name OMNIKEY CardMan 5x21-CL 0
select -AID a000000003000000
Command --> 00A4040008A000000003000000
Wrapped command --> 00A4040008A000000003000000
Response <-- 6F108408A000000003000000A5049F6501FF9000
open_sc -security 1 -keyind 0 -keyver 0 -mac_key 404142434445464748494a4b4c4d4e4
f -enc_key 404142434445464748494a4b4c4d4e4f // Open secure channel
Command --> 80CA006600
Wrapped command --> 80CA006600
Response <-- 664C734A06072A864886FC6B01600C060A2A864886FC6B02020101630906072A864
886FC6B03640B06092A864886FC6B040215650B06092B8510864864020102660C060A2B060104012
A026E01029000
Command --> 8050000008AAF7A87C6013BC0300
Wrapped command --> 8050000008AAF7A87C6013BC0300
Response <-- 0000715457173C2A8FC1FF0200937A55C288805D8F2A04CCD43FA7E69000
Command --> 848201001023CA18742D36165ED992CFF2146C3D51
Wrapped command --> 848201001023CA18742D36165ED992CFF2146C3D51
Response <-- 9000
get_status -element 10
Command --> 80F21000024F0000
Wrapped command --> 84F210000A4F004FF8BE1492F7275400
Response <-- 0CF0544C00004D4F44554C415201000009A00000006203010C010100010AA000000
06203010C01019000
GP211_get_status() returned 2 items
List of Ex. Load File (AID state Ex. Module AIDs)
f0544c00004d4f44554c4152        1
a00000006203010c01      1
        a00000006203010c0101
card_disconnect
release_contextPlease help me..
And please correct me if i'm wrong,,
Thanks in advance..

Any suggestions for my question?..
Please help me..
Thanks in advance..

How to install XAP files to Lumia 920

May I know how to install XAP files into Lumia 920 since it doesn't have the SD card slot.

I dont think , if it continues like that in windows phone OS, i dont think people will like windows 8 in near future, we are going to get mozilla OS, Linus OS in near future , and still Windows follows old principle of every thing money matters, better AS a loving fan of nokia am suggesting instead of windows OS better look for other options to increase market share, the kind of purchasing windows phone is waste of money and no customizations, it reallllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllly frustrating nokia lummia users and I am suggeting all my friends to not to buy lumia eventhough I am hard core fan of Nokia and they are surprising about,
NOKIA please re think about Windows OS phones???????????????????///

How to install .exe files on pawerbook g4?ty

how to install .exe files on pawerbook g4?ty

dot e x e files are PC executables. They will not work on a PowerBook unless you have an appropriate Windows PC emulator, such as Virtual PC on the machine, which BTW runs very slowly on my TiBook so I don't use it very often. (Actually, I haven't used it for anything that actually worked in several years.)

How to install MSP on selected computers via GPO Startup VBscript

Hi folks,
I'm trying to write a vbscript that will run on startup and do the following:
1) Detect whether or not a particular application is installed
2) Determine if the latest version of said application is installed
3) If not, run the MSP update from a server and apply the patch before login.
I'm on a domain, and the script works when manually run from a command prompt. I also have the script added to a test GPO under Computer Config>Windows Settings>Startup, but since this is my first real attempt at scripting, I'm not sure how to
determine why the *.MSP file isn't running and get this working.
Here's my code so far:
Const HKLM = &H80000002 'HKEY_LOCAL_MACHINE
strComputer = "."
strKey = "SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall\"
strEntry1a = "DisplayName"
strEntry1b = "QuietDisplayName"
strEntry1c = "DisplayVersion"
strEntry1d = "UninstallString"
' Set args = Wscript.Arguments ' Get Command Line Argument
' strVersion = WScript.Arguments.Item(0)
Set objReg = GetObject("winmgmts://" & strComputer & "/root/default:StdRegProv")
objReg.EnumKey HKLM, strKey, arrSubkeys
intVersionNum="1.0"
For Each strSubkey In arrSubkeys
intRet1 = objReg.GetStringValue(HKLM, strKey & strSubkey, strEntry1a, strValue1)
if intRet1 <> "" Then
objReg.GetExpandedStringValue HKLM, strKey & strSubkey, strEntry1a, strValue1
intCompare=StrComp("Adobe Acrobat XI Pro",strValue1,vbTextCompare)
IF intCompare = 0 THEN
objReg.GetExpandedStringValue HKLM, strKey & strSubkey, strEntry1c, intVersionNum
END IF
End If
Next
IF intVersionNum="1.0" THEN
WScript.Quit 2 ' Not Found
END IF
intVersionCompare=StrComp("11.0.06",intVersionNum,vbTextCompare)
IF intVersionCompare = 0 THEN ' Everything OK
WScript.Quit 0
ELSE ' Run Update
Set oShell = WScript.CreateObject("WSCript.shell")
oShell.run "msiexec.exe /update \\RedactedServer\gpo\Acrobat\AcrobatXIPro\AcrobatUpd11006.msp /quiet"
WScript.Quit 1
END IF
Note: RedactedServer isn't a variable; I removed our servername. Also, I'm reasonably certain there isn't a permissions issue because we use the \\RedactedServer\GPO\ to successfully deliver all of our MSI GPO updates.
When I restart, it looks like the script starts to run(?), but the update isn't installed. In the Application log, all I see is this:
But, there's no follow-up entry indicating that it was successful or even completed.
Ideally, I'd also like to be able to pass in a command line parameter from the GPO so I can update it without having to edit the script every time a new update comes out, but I'd prefer to run before I fly.
Lastly, yes, the script is looking for Adobe Acrobat XI Pro. I'm aware I can slipstream the MSP into an AIP and push it that way, but I don't want to redeploy a 2.3 GB installation to each computer that needs an update every 3 months when this will
accomplish the goal much quicker and more efficiently.
Does anyone have ideas? I've beat my head against this all day, and my search-fu doesn't seem to be helping me find the answers I need.
Thanks,
Rick

Microsoft note that Office 2013 cannot be installed by Software Distribution. The MSP you have is a patch file. The script is a cleaner.
I do not know what is waiting for what or what script you may be referring to.
If you think it is fixed then good but I do not really understand what you are saying has worked.
¯\_(ツ)_/¯

How to install .SAR file

I just downloaded Netweaver Developer Studio SP 11. Its in .SAR format. Am wondering how to install it?

Hi!
i have the same problem.........................
i was download sap developer studio2.0 Sp21 from sap market place.
This file come with "JIDE21_0-10002804.SAP".
when i try to uncompress using SAPCAR -XVF, It's showing following error.
Invalid UDF-8 encounter.................
Illegal bite sequence C:\a\.............................
kinldy give me the solution.
regards
raghu

How to install ipsw file on my slide to setup iphone 4s

i got myself in a big mess when erased all content am settings on my iphone 4s without backing anything up, since then, when turrn on the device, what comes up is "SLIDE TO SETUP" and when slide, it tells me to select my language and country, having done that, what comes up again is "CHOOSE A NETWORK(wifi)" and down the screen, see "CONNECT TO ITUNES IF yOU     ddont have an available wifi ntwork,i clicked on that and the nxt screen is "connect to itunes" somebody told me to turn off the phone, hold down the home button before   I connect my usb to the phone, that way , itunes will detect it and restore my phone, did so, itunes detected the phone but before it can restore, the OS need to be downloaded,I accepted, the OS is about 1.4G, and the ntwork here is so bad that the OS even download,I decided to download the ipsw file for the phne with my blackberry device, and my problem now is how to install the ipsw file to my iphone, somebody should please help me out I plead , am in a big trouble, pls help me out .

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device
1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
2. iOS- Forgotten passcode or device disabled after entering wrong passcode
3. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
4. iOS- Understanding passcodes
5. What to Do If You've Forgotten Your iPhone's Passcode
6. How to Recover Forgotten iPhone Restrictions Passcode | The iPhone and iPad
7. Restoring iPod touch after forgotten passcode
8. RecBoot: Easy Way to Put iPhone into Recovery Mode - if all else fails.
Forgotten Restrictions Passcode Help
1. How to Recover Forgotten iPhone, iPad Restrictions Passcode
    If this method does not work, then you will need to fully Restore your
    device as New

How to Install .bar files on Z10

I tried to install .bar file on Z10 tried enabling development mode and downloading sideloading tool which is an .exe file which again cannot be opened. How to intal them?
Solved!
Go to Solution.

Sachesi should do the trick. Look in these forums for the "Downloaded Applications for BlackBerry 10" section. There's a sticky at the top about installing Android apps, the Sachesi link is there.
Cheers.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

How to install admx files

hi all,
i have found the admx files i need for a task iv been asked to do. However once the files are downloaded how do install the admx files?
Thanks

> store. Can i simply copy one admx file for IE10, or do i have to copy
> everything?
Everything - the whole local %windir%\policydefinitions folder.
> 2. Noticed there are various versions of the template available for
> download. There is 2008 R2 version, and 2012 version. As i am using 2008
> R2 SP1, should i be using the latest 2012 version? or doesn't matter
> which one i use?
Use the version you need for your target OS. If your clients are running
Win8, use 2012 and Win8.
> 3. Apparently you can also install the templates into your local WIN7 PC
> as well. However, if i do this, and then launch GPMC from WIN7, and
> decide to make a change to one of the policies, will this change
> actually take affect in the domain?
Yes. ADMX only defines the UI in gpedit, not the real "content" of GPOs.
> local workstations to Sysvol in AD. So if this is the case, what is the
> purpose of being bale to install the templates in your local workstation?
One example: In Win7, MS introduced the ability in ADM templates to
write REG_MULTI_SZ. Vista doesn't understand this ability. So, if you
use a central store AND have both Vista and Win7 clients AND you
populate the central store with Win7 ADMX, you cannot edit ADM templates
on Vista anymore...
>
> Thanks!!
>
> DM
>
> -----
>
http://social.Technet.microsoft.com/Forums/en-US/winserverGP/thread/9411f3e6-d189-4410-8ee7-5d3f15afe857#e2ab591b-2d4c-4cde-bc3a-0588eaec044a
> -----
>
Martin
Mal ein Buch über GPOs
<http://www.amazon.de/Windows-Server-2012--8-Gruppenrichtlinien/dp/3866456956>
lesen?
NO THEY ARE NOT EVIL, if you know what you are doing: Good or bad GPOs?
<http://evilgpo.blogspot.com>
And if IT bothers me - coke bottle design refreshment
<http://sdrv.ms/14t35cq> :))
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

How to install msi files

How to install an .msi file to view web tv on mac from an operator

MSI files are Windows installers. To install that application, you may try an application like CrossOver, that makes Windows applications run on OS X, without having to install Windows on the Mac.
If it doesn't work, you will have to install Windows on Boot Camp or a virtual machine

How to deploy .msp files through SCCM 2012

Team,
Can you please help me to deploy .msp files through SCCM 2012?
Regards,
Mahadev Nitture

I tried to search and got few things but didn't understand to proceed with.
Please help me with this.
Regards,
Mahadev Nitture
You can use a typical/standard application deployment method (just a minor change because of MSPfile).
Here are some guides, for typical application deployment:
http://technet.microsoft.com/en-us/library/gg682159.aspx
http://www.gerryhampsoncm.blogspot.ie/2013/03/sccm-2012-sp1-step-by-step-guide-part_7075.html
Familiarise yourself with these methods, then return to the example suggested by Torsten for specific steps for MSP:
https://social.technet.microsoft.com/Forums/en-US/3dac27fd-ce4f-4d3d-946b-d08d4c7f5af5/best-way-to-deploy-an-msp?forum=configmanagerapps
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

How to install OpenGL files on Solaris 10

I found OpenGL stuff is missing from the Solaris 10 system when I installed gtkglext from its source code and got an error after the 'configure' command.
bash-3.00$ ./configure
checking GL/glx.h usability... no
checking GL/glx.h presence... no
checking for GL/glx.h... no
configure: error: Cannot find GLX header
I remember that for software groups during Solaris 10 installation, I did choose the Entire Solaris Software Group to guarantee the developement packages are installed. Could you give some help on how to install opengl stuff from Solaris 10 installation disks?

It's hard to believe that no one here (official Sun
developer network) can answer my question. Maybe few
people develop under Solaris.That must be it.

How to install SCA files into CE 7.1

hi guys,
I have found ESR 6.0 has resolved several issues which I am facing during configuration of ESR in earlier version. The quesiton is how do I installed downloaded of SCA file from service market place???
Or any one has idea to insatall any SCA file into CE 7.1??
Regards,
Naeem

Hi,
NWDS> go to windows> perspectives>others>deployment-->and add the sca files
Regards
Manohar

How to install help files on BI 7.0 bex analyzer

Hi All
I have successfully installed the help files for my abap stack on BI 7.0, by configuring transaction SR13 to point to the help DVD on our file server.
However, when I try to go to help in the new version of the analyzer, I get the following error:
Help Type 5 is not valid for the platform NONE
Exception 5 when calling IWB_HTML_HELP_URL_GET occurred.
Does anybody have an idea how to fix this please.
Thanks
Sam

Hi All
I will e-mail all those that have asked for a screen dump. I will also include the instructions below:
1. Copy the PlainHTMLFile and the HTMLHelpFile from the Help cd to a windows servers
2. Goto transaction SR13
For BEX Analyser Help
1. To install the BEX help files, click on the PlainHTMLFile tab
2. In the Platform Filed enter NONE
3. In the Area Field enter IWBHELP (or you can select documentation from the drop down)
4.In the PATH field enter the path of the PlainHTMLFiles that you copied to your server (i.e C:\Help\PlainHTML\BEXHELP\helpdata)
5. In the Language field, enter EN
6. Click on DEFAULT check box.
7. Save your changes
For Abap stack Help
1. To install the Abap help files, click on the HTMLHelpFile tab
2. In the Platform Filed enter WIN32
3. In the Area Field enter IWBHELP (or you can select documentation from the drop down)
4.In the PATH field enter the path of the HTMLHelpFile that you copied to your server (i.e C:\Help\HTMLHelpFile\helpdata)
5. In the Language field, enter EN
6. Click on DEFAULT check box.
7. Save your changes
Please let me know if anybody needs more assistance
Thanks
Sam

How to Install Air file in Android phone

Hi,
I have created a help system using RoboHelp and created adobe Air file. I want to install the help file in my Android phone. how do i install the help in my phone. I have installed Adobe Air application through Android market. but i am unable to install the air application. is there a way to convert the AIR file as PKG and install it?
please help.
thanks.

Follow up - just found this thread - http://forums.adobe.com/thread/887118?tstart=0
You're out of luck - go hit the wish list form at: http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&product=38

How to install msp files

Similar Messages

Maybe you are looking for