How to install my 5.1 speaker system
Hi,
I'm going to purchase a new 20" iMac once Leopard is out in October, I will be moving from a Windows PC and would like to continue to use my Creative Inspire T6060 5.1 speaker set.
I have noted that the iMac only comes with a headphone jack, currently my speakers connect via three seperate jacks into a soundcard.
What is the best way to connect my speaker system?
Thanks in advance for your help.
Headphone jack on all current Mac models (include latest aluminum iMac) doubles as SPDIF digital optical output as well. In other words, both analog (for headphone/line-out) and digital audio outputs are built into the same combo jack. Same analog/digital implementation for the audio input jack. Alternatively audio output can be sent through USB bus in digital form to external decoder. Thus unlike PC, the compact iMac does have many extra features already built-in.
All you need is an external 5.1 decoder to decode 5.1 digital output from headphone jack or USB port into analog format with three analog outputs for Creative Inspire T6060 5.1 speaker set (woofer/centre, front L/R, surround L/R). The only such decoder I have come across is Tutle Beach's Audio Advantage SRM (www.turtlebeach.com) though there are many surround audio decoders/receivers (mostly with SPDIF optical outputs) on sale in audio equipment shops. Take note that Creative Inspire T6060 is active speaker (amplifier built-in) whereas outputs from some surround decoders/receivers are meant for passive speakers. The difference is between low line level outputs (for active speakers) vs high amplified outputs (for passive speakers).
Optical Toslink cable with two different connectors on both ends (standard Toslink / 3.5mm Mini Plug) is required to connect between headphone jack output and external 5.1 decoder input. In case when USB port is used, any good USB cable built for peripherals (printer, external drive etc) will do.
Since I never play game and hardly watch movies with my new aluminum iMac, only good stereo audio is required for music appreciation with following setup:
iMac USB port -> Firestone Fubar3 DAC -> Firestone Tube Head Pre-amplifier (vacuum tube) -> Harman Kardon SoundStick2 speaker
Hope the information will help.
Similar Messages
-
How to install ftp service on the system?
OS: SuSE Linux Enterprise Server 8
How to install ftp service on the system?
How to check and modify to use it?
I am not able to use FTP.
Regards,
DRohit,
If its about installation/Deployment of Agent- then its through SDM,
'configuration' can be manual or Atuomatic:
Manual-> refer the installation Guide which digesh has mentioned -(from page 20).
Automatic- Its through Diagnostics Setup through Solman -(Its bit easy).
Thanks,
Jagan -
How to install ABAP as a backend system in my EHP1
I have successfully installed EHP1 composition enviornment from SDN , now i m able to work on
NWDS for JAVA and Enterprise portal . it contains java application server .
but in order to get data from ABAP Backend system from NWDS(JAVA) , I don't have ABAP Backend sysytem , how to install abap backend system with abap application server in my system ????
there is one link to install Netwaever ABAP 7.1 trial version( webdynpro abap and abap application server ) in sdn but in system requirement it clearly mentioned that " make sure that there is no SAP sysytem installed in ur system " .
I need webdynpro java ,webdynpro abap and enterprise portal together but i have only webdynpro java and EP , so how to install abap as a backend system in my EHP1 ?
or any other download link which contain all three ??
please help me ?Hi,
CE is indeed not double stack. However, it is possible to install both an ABAP and a CE on the same host provided they have different system ids and instance numbers. This works for the current SDN download versions: CE 7.1 and CE 7.1.1 (system id CE1, system number 00) and AS ABAP 7.01 (system id NSP, system number 02).
Needless to say, it is perfectly possible to configure and establish all kinds of connections between the two:
JCo/RFC calls in both directions
Web Service calls in both directions
AS ABAP as a portal backend
publishing system information in SLD
accessing an ESR
accessing a Service Registry (publish + query)
using AS ABAP as user database for the CE
Single Sign-On
Best regards,
Thorsten -
How to install ABAP as a backend system in my EHP1 composition enviornment
I have successfully installed EHP1 composition enviornment from SDN , now i m able to work on
NWDS for JAVA and Enterprise portal . it contains java application server .
but in order to get data from ABAP Backend system from NWDS(JAVA) , I don't have ABAP Backend sysytem , how to install abap backend system with abap application server in my system ????
there is one link to install Netwaever ABAP 7.1 trial version( webdynpro abap and abap application server ) in sdn but in system requirement it clearly mentioned that " make sure that there is no SAP sysytem installed in ur system " .
I need webdynpro java ,webdynpro abap and enterprise portal together but i have only webdynpro java and EP , so how to install abap as a backend system in my EHP1 ?
or any other download link which contain all three ??
please help me ?Hello Shilpa,
in other [thread|Re: ABAP and JAVA version of NW2004s sneak on the same system;, where you have the contribution to the same topic, Raja has written:
earlier i had abap and ep sp16 (first ep was installed and then abap was installed)
I would try on your side to instal ABAP instance now. At worst scenario, you have to make both installation
again on clean up HD.
Bye,
Peter -
How to install and configure Essbase in System i or AS 400
Hello All,
I have given task by my employer to install Essbase 11.1.1.3 in AS 400 system. Can someone guide me that what steps and what do i need to finish that task.
I do know how to install and configure Essbase in Windows but I have never get chance to work on AS 400 systems.
I hopping for promp feedback.
Thank you very much in advance.You should speak with someone at IBM. See http://www.spss.com/software/deployment/showcase/olap-solution.htm
Oracle doesn't distribute an Essbase product on AS/400 -- IBM purchased the rights to the source code through an agreement years ago.
Regards,
John A. Booth
http://www.metavero.com -
How to interconnect Creative 7.1 Speaker system to
HI All,?I have bought a Creative 7. Speaker system. I have connected it to my TV using the Audio Out (left & right) to the Auxiliary In of the 7. speaker system and now only 3 speakers are producing the sound. The center and the surround speakers have no output. Please guide me on how I can interconnect this 7. system with my TV and get the speakers working. Thanks in advance.Chris?
Headphone jack on all current Mac models (include latest aluminum iMac) doubles as SPDIF digital optical output as well. In other words, both analog (for headphone/line-out) and digital audio outputs are built into the same combo jack. Same analog/digital implementation for the audio input jack. Alternatively audio output can be sent through USB bus in digital form to external decoder. Thus unlike PC, the compact iMac does have many extra features already built-in.
All you need is an external 5.1 decoder to decode 5.1 digital output from headphone jack or USB port into analog format with three analog outputs for Creative Inspire T6060 5.1 speaker set (woofer/centre, front L/R, surround L/R). The only such decoder I have come across is Tutle Beach's Audio Advantage SRM (www.turtlebeach.com) though there are many surround audio decoders/receivers (mostly with SPDIF optical outputs) on sale in audio equipment shops. Take note that Creative Inspire T6060 is active speaker (amplifier built-in) whereas outputs from some surround decoders/receivers are meant for passive speakers. The difference is between low line level outputs (for active speakers) vs high amplified outputs (for passive speakers).
Optical Toslink cable with two different connectors on both ends (standard Toslink / 3.5mm Mini Plug) is required to connect between headphone jack output and external 5.1 decoder input. In case when USB port is used, any good USB cable built for peripherals (printer, external drive etc) will do.
Since I never play game and hardly watch movies with my new aluminum iMac, only good stereo audio is required for music appreciation with following setup:
iMac USB port -> Firestone Fubar3 DAC -> Firestone Tube Head Pre-amplifier (vacuum tube) -> Harman Kardon SoundStick2 speaker
Hope the information will help. -
How to install Romanian Language in Unicode System
Hello,
Please let me know how to install Romanian language in a Unicode system.
What are the steps to install it via SMLT.
What are the profile parameters I have to change.
Other than installation of language, do I have to perform any additional steps for Romanian Language?
Currently we have English, German language in our Unicode system.
Points to be rewarded for any kind of help.
Thanks,
HaleemHi,
1.check Delivered Languages service.sap.com/languages.
2.check note 42305
3.In transaction SMLT , Choose Classify Language (Language symbol or F5 )
4.Supplement this language with English or German (Recommended)
5.The language must be defined in the instance profiles so that you can log on in these languages. The relevant parameter is
zcsa/installed_languages.
6.Go to the language for which you want to install extra packages and choose or choose Language --> Import Package
7.in the next screen , enter the path for language packages.
8.start immediately or schedule it .Optionally you can use the target server to exceute this ( to avoid performance issues
,if you are importing in production timings, and you cna exculde this server from logon group )
9.if any problems in importing then analyze the log and restart the import .
10.After importing the languages, you must also import the language data in the Support Packages.Choose Language --->
Special Actions ---> Import Support Packages
11.Go to the language that you want to supplement and choose or Language ---> Supplement Language(this is client specific ,
so execute for each client in your system) -
Regd. How to install iTunes on Ubuntu operating system , pls help
Guys - please help me on how to install iTunes on UBUNTU the LINUX operating system
https://www.google.dk/search?q=linux+get+wine+to+run+itunes&oq=linux+get+wine+to +run+itunes&aqs=chrome..69i57.5368j0j8&sourceid=chrome&es_sm=93&ie=UTF-8
-
How to install xp on windows 7 system (dual boot)
Hi all!
I have Lenovo s10-2 with 3G module and Windows 7 start edition originaly installed on it.
Beacause the system is very slow I want to install xp home via usb. And I woud like to have both systems working.
Is the any tutorial how to do it? And what software I need for doing it?
Thanx in advance!With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, see if iTunes will launch without the error now.
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
How to install EASY DMS (Document Management System) setup in windows 7
Dear Experts,
Recently we have started a project to establish document management system in SAP. So, i have downloaded easydms7.1sp04 from the servicemarketplace service.sap.com/swdc and setup is successfully installed in windows Xp and unable to install successfully in windows 7.
The SAP is upgraded in our company to release ERP6 EHP6.
In windows Xp the DMS is accessing to all the systems in the landscape( DEV, QAS, PRD).
But, In windows 7 it is only accessing the production system and if creating manually the systems prompting the error about RFC and hosts in windows 7.Hi Sir,
As mentioned earlier it is prompting me the error
Logon Failed (RFC_ERROR_LOGON_FAILURE)
Name or Password is incorrect (repeat logon)
But it is accessing only the production system in windows 7 but not all the 3 systems which are in landscape. I dont know how can it proceed to logon to the production system only with out other systems .
Thanks in advance
Regards,
Easwar -
How to install flash player on my system without having admin access
Hi Team -
I am working on my company system. I tried viewing youtube, its asking me to update the flash player and when i tried installing it shows you didnt have admin access. Since i using my company system, i dont know the password for admin. Hence pls tell any alternate to install the update without admin access.
Thank you
GanapathyIt cannot be done. Contact your I/T personnel to have them install it. If they won't, the company doesn't allow it. You cannot do anything about that.
-
Windows 10: how to install Microsoft's new operating system
The tech world is buzzing these days with Windows 10 excitement. The highly anticipated operating system is full of exciting new features and technology. The new OS manages to be familiar yet fresh and powerful, giving you the flexibility to have it work the way you want it to. Many users have already taken steps to upgrade for free, and are loving the changes. You can upgrade today too, and install Windows 10 on your machine. Don’t worry if you’ve never upgraded an operating system before either. I’ll help you along with this handy guide.
When ever I use the media creation tool, I have been stuck at 0% for ages and wont so anything.
-
How to install Oracle on NON FILE SYSTEM platform(UNIX OR NT)
Anyone tell me
First of all thanks for your help,
I tried again with ./runInstall -ignoreSysPrereqs but I got another error...
"Starting Oracle Universal Installer...
Checking Temp space: must be greater than 120 MB. Actual 63827 MB Passed
Checking swap space: must be greater than 150 MB. Actual 6233 MB Passed
Checking monitor: must be configured to display at least 256 colors
>>> Could not execute auto check for display colors using command /usr/X11R6/bin/xdpyinfo. Check if the DISPLAY variable is set. Failed <<<<
Ignoring required pre-requisite failures. Continuing...Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-02-19_12-16-16PM. Please wait ...sh: /home/octopus/downloads/database/install/unzip: not found"
every time I try another way to install I get another error or something...
I tried the installations with the response file but I got the same error...
"Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-02-19_12-16-16PM. Please wait ...sh: /home/octopus/downloads/database/install/unzip: not found"
When I search for that file in " /home/octopus/downloads/database/install/" "unzip" is there.....
Any ideas???
Thanks in advance! -
How to connect iPod nano to speaker system
How to connect iPod nano to a stereo amplifier?
Hello Secullinanjr
Try using an auxiliary cable to connect it to your stereo. Check out the article below for more information and another alternative.
Connecting iPod to your home or car stereo auxiliary input using the headphone jack
http://support.apple.com/kb/ht2167
Regards,
-Norm G. -
The file I copied is the "profiles" file. If that's not the correct one, please point me in the right direction.
Thanks.Is there no ANSWER TO THIS PROBLEM?
Maybe you are looking for
-
SSO from portal to Java based web application not happening
Hi, We are trying to configure SSO from SAP Enterprise portal with Java based web application(Solaris on SPARC 64 bit). Then we downloaded library files for "Solaris on SPARC 64 bit" from service market place from the path "Support Packages and Patch
-
New Field not Showing up in Report.
I have a CR query that I am editing to add a column to my report. When I make my edits, the query runs, but I do not see the new field in the field explorer. The part in purple is what I added. Do I need to add it elsewhere in the code? WITH SEL_A
-
"disc burner is in use" error message?
I am trying to burn CDs from an iTunes playlist and get the message "The disc burner is in use by an application other than iTunes" when it is not in use. This happens about half the time
-
Three days ago the screen resolution on my macbook pro 17" reduced dramatically. Prior to logging in the screen resolution appears okay, but once logged in the screen reverts to blotchy text and graphics. Has anyone had this problem? What was to solu
-
In the very near future we will be forced to upgrade to Office 2010 Company wide and I am a little concerned with some of our older test platforms that have applications built in LabView 8.2.1. These applications save data to MS-ACCESS 2000 database