How to install netgear wgr614v6 wireless router

im having so much trouble with this. its not doing nething it sud be. absolutely no help off netgear and no instillation cd. can anyone help please!

Try the netgear support forums. This is a Linksys forum. If you have a problem with a Linksys router you are at the right place. If you have a problem with a Netgear router you should go to a Netgear forum.

Similar Messages

  • How to setup netgear N150 wireless Router to apple tv ?

    im an infant that has finally given in to technology, that could use a little help
    setting up NETGEAR N150 wireless router to my Apple TV ?

    See my other reply.  Avoid double posts if you can.

  • How to Install Netgear DGN2200 modem/router combination

    My Netgear DGN2200-100NAS arrives today and I would like to know of any tips or suggestions in the setup and install for my iMac running 10.6.4. The installation CD only is useful for Microsoft PCs, and all installation scripts are for PCs only.
    Any suggestions would be appreciated.
    Thanks
    Message was edited by: wmm5

    I'm not familiar with that specific router but typically you don't need to install any software when connecting a router. Even PC users often use the router install DVD as a coaster instead of installing the software. If you are connecting the router to the usb port of your computer you will need to install the router's usb drivers. But connecting a router to the usb port is a bad idea. Just connect it to your cable/DSL line and to your computer(s) using Ethernet. It should automatically connect with default settings. Let us know if you run into problems.
    Depending on who your ISP is, you may need to call them to register the modem with their service. I know you need to do this with Comcast otherwise their system won't allow your modem onto their network.
    Message was edited by: BobTheFisherman

  • HT1731 Help installing Airport Express with Netgear N150 wireless router? I hav

    Hi,
    I just purchased the newer Airport Express (new) and am having issues using it in client mode with my Netgear N150 wireless router. All I want to use it for is streaming itunes from my aluminum macbook to my home stereo system, wirelessly.
    I have followed the instructions that came with the device. No luck. I have followed the instructions that describe plugging it into an ethernet cable here:
    http://support.apple.com/kb/HT1731
    With the apple instructions linked above it would connect fine to my existing wireless network, using airport utility, with 'excellent' connection, but when I tried to switch in itunes to my device from my computer i get the pinning wheel and an 'unknown error' occurs.
    I have setup a new wireless account and password on my router as desribed at this page, but do get confused when it tells me to use the hex key and $. Haven't worked that out yet. Any advice would be appreciated if this would help.
    http://hints.macworld.com/article.php?story=20041017233832771
    At best, after hard resetting the device several times, and following the instructions above at macworld, it now finds the device but only plays one blip second of a song, flashing amber from solid green, sometimes playing a second blip of a song, then pausing the song and switching to a flashing amber. By restarting my computer or opening AirPort utiliy I am able to find it again, but it either only plays one second of a song and drops again or turns green and is not able to be found at all by itunes (the button doesn't show up in the menu).
    This is the second airport I have tried in 2 years. I purchased a used one and had nearly the exact same issues with a linksys router. Then it would play an album but reset if a song was paused.I had to hard reset it nearly every time i wanted to stream from itunes to my stereo. I assumed it was broken and sent it back. Figured I 'd give it a new go around with a new unit since i just moved into a new house and am now shocked at how difficult it is to set up. I have never had this many issues with an apple device.
    My questions:
    1) How can I set this up with my existing router? What am I doing wrong?! Why is it so difficult?
    2) If not possible, what routers are compatible? I would gladly get a new router in order to stream music to my stereo from ITunes.
    thank you for any assistance. i am pulling my hair out.

    Try temporarily disabling the Windows 7 firewall, and then, try accessing the AirPort with the AirPort Utility again.

  • I need to know how to connect to internet using the netgear n150 wireless router

    I recently signed up with comcast internet.  They supplied a NETGEAR N150 wireless router.  After following instructions that came with router, I still cannot use the router to connect to the internet.  The computer has to be connected directly to the modem for internet access.  HELP!!!!

    Here are some of the recommended setting from Apple.  Maybe that will help.
    http://support.apple.com/kb/HT4199
    Regards,
    Captfred

  • Connecting Westell 6100G to Netgear n300 Wireless Router

    I've just purchased a netgear n300 wireless router.   My question is would I defintely need to set the Westell 6100G modem to bridge mode?  After I do that I simply connect the wireless router to the modem and then the router to the computer via one of the ports?  After that is done would I need to do anything else?   Would I be asked for my verizon login and password in order to get connected?
    Solved!
    Go to Solution.

    It's recommended to bridge your modem as the modem itself does have an integrated router, even though it only has one Network port to connect up with. You have to split it up using a switch if you wish to really use it as a wired router. The reason why you bridge is so that your router holds your Public IP address rather than the modem. This avoids a condition known as "Double NAT" which game consoles dislike, VPNs tend to be iffy with, and Port Forwarding becomes a pain to do as you have to do it twice.
    Yes, Bridge the modem. As far as the Netgear is concerned, if your modem reports that it is using PPPoE, the Username and Password you will need to use will be the master login you use for your DSL account. In the Netgear, it will auto detect that you use PPPoE in most circumstances however, it won't automatically pull your username and password. In some cases it may just connect right up if Verizon still does OpenPPPoE. Otherwise, if you're using a Setup program that came with the router it should ask you for your username or password to connect up. If not, Netgear has changed their firmware around in recent years, but in most cases it is under the Basic Setup or "Internet" section of your router for adding in a PPPoE username and password. The best place to look for this would be the user guide for your router. It should detail how to set up your connection based on what you're using.
    ========
    The first to bring me 1Gbps Fiber for $30/m wins!

  • Can I Show Time Connected When Using Netgear DG834 Wireless Router ?

    When I had an old SpeedTouch USB Modem I could see the time I had been connected to the internet from a readout in the menu along the top of the monitor.
    Is there a way of displaying or ascertaining this information using the Netgear DG834 wireless router?
    I have discovered that by opening the Router Satus and clicking on "Connected Status" I can get a window displaying this info - but is there a quicker "automatic" way of doing it?
    Ian.

    Hi Ian,
    Interesting one…
    When you connect via a USB modem the computer is 'doing' the connecting using the modem so the computer has the 'time connected' status available locally. In the case of a router it is connected to the internet irrespective of the computer's status; on, off, sleep, or even, connected to the router. The only way you're going to get the info is from the router itself and, unless it has a setting whereby it will automatically 'inform' the computer of its connected time, I think you're going to have to carry on as you are.
    I don't know that particular Netgear but used to have a different one until a thunderstorm fried it. I don't remember it having such a setting. My current Belkin certainly hasn't.
    I'm quite interested to know why you want this info. Are you on some kind of PAYG tariff?
    Adrian

  • How do I make my wireless router the "preferred" one?

    How do I make my wireless router the "preferred network"?  I have to manually re-select it each time I boot up or when it comes out of standby.  This has only started to occur now that I have a new wireless router.  I want it to automatcially select my router.

    Have you restarted your computer?  Repaired permissions and restarted your computer? 
    Which os are you using? 

  • I installed the WRT54G Wireless router on my desktop and...

    I installed the WRT54G Wireless router on my desktop and have been using the internet on that pc and my laptop (wirelessly) for a few months.  Last week I uninstalled Norton Internet Security and installed ESET Smart Security.  Now my desktop cannot get to the internet and the advisor says it does not detect a router.  But my laptop says it's connected to my network and I am able to use the intenet on it.  The router itself has all of the correct connecions and the appropiate lights are lit.  Could the ESET Smart Security Software have messed up my router firmware.  Please advise.

    there seems to be consistant issues with Linksys routers according to all the posts ive been reading for the past month while i try to fix my on and off again internet connection.  its becomming very annoying.  i have asked my cable company to replace my modem, which they did and that didn't even help.  last year i bought a new linksys router thinking it would solve my problem back then.  it did for a while, then my lap top wouldn't connect any, so i sent it into have it checked and it came back with no problems.  soooooooooo apparently, while i am connected to my neighbors open connection from his BELKIN ROUTER and even though the signal is very weak............amazingly enough!! i am still online while typing this.......funny eh?? WELL........it seems to me......that i guess i wont be buying linksys anything anymore.  Especially after spending hours on the help line (INDIA) trying to reset channels and reset the router box itself.  i give up.......i  have 2 pieces of crap routers for sale cheap......any takers?  dont waste your time

  • Don't have an aircard- do have netgear n wireless router -unit is an imac g5-power mac 8,1-cpu g5 3.0-proc 1.8-mem 1.5-os 10.4.11   don't have                       which one should I get for imac g5 -power mac 8,1-cpu g5 3.0-  proc 1.8-mem 1.5-os 10.4.11

    don't have an airport card- do have netgear n wireless router -unit is an imac g5-power mac 8,1-cpu g5 3.0-proc 1.8-mem 1.5-os 10.4.11   what airport card should I get ?

    Look HERE to find the appropriate airport card - you can use an Airport Extreme card.
    And here  to buy one.

  • I'm trying to install a Linksys wireless router.  Went th...

    I'm trying to install a Linksys wireless router.  Went through the installation software and all appears to be in order. Except that the message that I'm getting is that my router is not signed into my internet connection.  Yet it is--I'm writing this aren't I? 
    The 4 green lights are on and I've reviewed the installation instructions.  Any help? 

    You need to make sure that you have  an active internet connection from your ISP (Internet Service Provider). What connection are you using, CABLE or DSL ?

  • HT4199 I have a Netgear R6300 wireless router and a Yamaha RX-3020 A/V receiver. An app is available to run on an Ipad. I have to reboot every morning to get it all working. Can I just plug cat6 between them, when I do nothing works, please help

    Should I use a network switch and plug my Yamaha A/V receiver and Yamaha DVD into it, then into the wireless router? Then the net into the routers net port???

    HT4199 I have a Netgear R6300 wireless router and a Yamaha RX-3020 A/V receiver. An app is available to run on an Ipad. I have to reboot every morning to get it all working. Can I just plug cat6 between them, when I do nothing works, please help

  • Does anyone know how to set up the wireless router when y...

    does anyone know how to set up the wireless router when you have a Vonage modem and a cable modem?  HELP!

    You mean u got 2 modems ?
    C | EH
    linksyshelp.blogspot.com

  • Something happened to my Netgear wgu624 wireless router

    I have a Netgear WGU624 wireless router that seems to have stopped working today. I had my cable modem connected to it and it was creating a wireless network for my three computers.
    I had to switch to plugging the ethernet cable directly from my cable modem into my macpro so I could get online.
    I'm not sure what the problem is with the router but I don't seem to remember the a & g lights blinking before like they are now. I tried plugging the an ethernet cable directly from my router into the second ethernet port on my macpro (with the cable modem plugged into port 1) to see if I could access the router by going to 192.168.1.1. No luck, the browser says "failed to open page".
    Is there some way to check to see if the router is bad? We did have a storm today. Everything else is fine though...
    Any thoughts would be appreciated.

    Good choice on the Airport base Station.
    Especially, since that netgear was so hard to manage.
    You may have gotten a spike during your storm, but you still didn't give us enough information to be useful
    You should have seen a router address in network prefs, yes.
    Aaah, naples. My grandparents bought a little condo on Gulf Shore Blvd, across from Edgewater Hotel...in 1968. (2br, 2ba, facing hurricane harbor, $23K) You don't want to know what some of these condos are selling for now.
    We've been regulars on the beach for the past 40 yrs. Hard to watch some of the older places scraped, and those $8mm McMansions popping up, but what's more phenomenal are the changes up and down the trail. I mean between naples and Bonita, whoa! And the growth out towards Marco and out ON marco.
    Nice

  • HT1365 just installed a new wireless router (cisco linkseys E1200) and our apple laptops connect fine on one floor but lose connectivity when moved to another.  Other non apple laptops & Ipad connect with no problem no matter what floor they are on

    We just installed a new wireless router to our main PC.  It's a Cisco Linkseys E1200.  All other wireless devices were able to connect without a problem, including my Ipad.  We have 2 Macbook Pro laptops.  They both connect just fine when on the same floor of our house as the router, but when we take them upstairs to the 2nd floor of the house, they lose connectivity and it states the wireless password is not the correct password.  All other 2nd floor laptops have no problem at all with connectivity no matter where they are in the house.  Please help- my husband is on the verge of selling Apple if that cannot be remedied. 

    This would not be a security issue symptom. I would consider checking for sources of wireless interference HT1365
    Trying changing the radio channel on your wireless network.

Maybe you are looking for

  • Crystal Report Parameter Default Value

    Hi All, I have one issues regarding the parameter in the report. I have two parameter field in the report. The scenario will be as below: In my report, i have mobile no & passport no parameter selection. Currently in my report, the selection was like

  • No combinations could be generated

    Hello, i am working with IP and we are using characteristic relationships. And i have a warning message in the messages after the initializing a workbook. The message is "Cannot generate combinations for MultiProvider 'ZCS_PA054'" and "Cannot generat

  • Error message after downloading e book

    Can somebody help me : after downloading a ebook by bol.com I have to download the adobe digital editions. everytime Im doing this i receive the error message: e_adapt_request_expired and a lot of text behind this. Can somebody help me .... Pauline

  • Why is Logic Crashing (again...and again...and, again!)

    Hi folks, This is my first post here as, frankly, until now my Mac Pro and Logic have been fairly flawless. After updating to Logic 9.1.8 on mac pro funny behaviour has been observed. Crashes - These usually happen whlie playing audio. If I loop a se

  • Reading context-param in JAX-WS

    I have created a JAX-WS using netbeans. How can I read the context-param values added in web.xml, in the web service (it could be any thing like database conneciton string)