How to install networked Epson Expression 10000XL?

Hello,
I have an Epson Expression 10000XL scanner with an ethernet card connected to my network. The scanner workes fine, but after makeing a clean install of OS X Mavericks I'm lost. The old drivers won't work, and the new ones are supposed to come automatically when connecting the scanner.
Since this is a scanner that I connect to over my Ethernet I don't understand how to trigger Mavericks to fetch the drivers. If I enter the "Printers and scanners" section of settings there seems to be no dialogue where I can enter an adress to the scanner.
Am I missing something here?

In the IP Pane I can see nothing that has anything to do with scanners. It's all about printers.
If I enter the IP-adress to the scanner I get a status line under the adress field that says that the adress is valid and complete. Fine, but after that? The only protocols to choose from are IPP, LPD and HP Jet direct. What should I use? To me this seems like Printer protocols only...?
At the bottom to the right of Use it says PostScript printer (or something like that, I'm on a swedish distro). If I try to find my scanner by choosing it, I can't find it.
I must say the dialouge is far from self explanatory when trying to add somthing that is not a printer.
I still don't get it.

Similar Messages

How to install SQL Server Express in Windows 10

Windows 10 x64.
Windows 10 running on VirtualBox 4.3.18.
Setup in not started without any messages.
There is no Setup.exe in Task Manager.
There is no errors in Windows Logs (Event Viewer).
There is no any SQL Server folders in Program Files or Program Files (x86).
Compatibility with Windows 7, 8 doesn't help.
Was tested english versions:
SQL Express 2008 R2 SP1 x64, SQL Express 2008 R2 SP1 with Tools x64,
SQL Express 2014 x64, SQL Express 2014 with Tools x64.
How to install any version of SQL Express?
Thanks in advance.
So, I can reproduce this problem.
By default windows have not .Net 3.5 installed, but SQL Server tools need it.
When I run sql setup on fresh windows it started normally.
If run .net setup when sql setup already running it's OK.
But if you exist from sql setup (or not run it) and install .net in Windows Components it's impossible to run SQL setup.

Do
you read me?
I can reproduce this problem.
By default windows have not .Net 3.5 installed, but SQL Server tools need it.
When I run sql setup on fresh windows it started normally.
If run .net setup when sql setup already running it's OK.
But if you exist from sql setup (or not run it) and install .net in Windows Components it's impossible to run SQL setup.
to install .net framework 3.5,
just go to control panel -> programs and features -> turn windows features on and off -> check .net framework 3.5

Does anyone knows how to install Iplanet Messaging Express under iWS 6.0

Does anyone knows how to install Sun One Messaging Express in iWS 6.0?
I have a server which has been installed with iWS 6.0 and another server which installed Iplanet Messaging Server 5.2.
anyone can help me on this?

The Webmail interface for Messaging Server is implemented as its own daemon - it's not a CGI or Servlet that runs through another web server. As such it can not be deployed through Sun ONE Web Server (or any other web server).

How to install Final Cut Express on a different mac

Hi everybody,
my dead iMac is under repair. Now, I need to install Final Cut Express on a different machine but I don't understand if this is possible. I mean, at the end of the process the installer will ask me to register the product, but the product is yet registered. And i'm not going to torrent final cut studio... I bought the original sw!
Any suggestion?
Thanks everybody
Luca Lazzari

Thank you, Ian. It's not a laptop, just the mac of a friend of mine, so i'll have to uninstall it AFTER a good restore from Time Machine...
Thanks
Luca Lazzari

How to install network adapter driver?

My Dell xps internet was working fine yesterday (wired connection) but then all of a sudden the internet stopped working even though the cat6 was plugged in to the router. I tried different cables to see if the cable was faulty but it turns out that my network adapter is missing a driver. I checked what network adapters are inside my motherboard but its come up with like 12 different network adapters. How do I know which one i should install the driver for? Also where can i find the correct driver to install?
I should also note i set my pc back to a date which it was in 4 years ago since it was really slow and i wanted to improve its performance.
I searched all over the web to find solution to my problem but none of the solutions at hand worked. 1 solution was to change the properties on my "Local Area Connection" but i haven't even got "Local Area Connection" icon for some reason (i have never seen a computer not have this icon before". It is like my computer is completely not picking up the connection from the router and even worse its as if its repelling it...
Anyways, signed up to this forum to see if one of you guys could help out :).

Sorted it now. Had to go into BIOS and enable internet connection.

How to install printer Epson stylus SX200 drivers ?

I have downloaded the drivers from the dedicated Epson website. I clicked on install and was told install was successful. now I can not find a way to have the printer identifued bu the iMac and to use it to print etc.
please help me how to make the last step to be able to print.
thank you ! :-) !

Dear Paul,
THANK YOU ! with your help I have installed one of the drivers on iMac§s list, the Epson Stylus photo R200, whihc I thought is the nearest to the Stylus SX200. this indeed allowed me to print! :-) !
however I also need to scan. any idea how I can get the scanner going as well, please?
Initially I have downloaded the drovers for SX200 from Epson own website. this is a bundle containing also the drivers for the scan. however this downloaded bundle which the iMac confirmed that it was installed successfully was not picked up by the "install new printer". that is why I sleelcted form the list already part of iMac§s sofrware the nearest drivers when adding a new printer.... just to get sometihng working which I did... the printing function.
please help me if you can to get all the bundle recognised or the scaning drivers to add to the ones working now.
THANK YOU !
Best,
Michael

HT204266 How to install an epson stylus nx230 printer on my iPad?

How do I install a wireless printer for my iPad?

You need to have a compatible version of iOS and an AirPrint compatible printer. Check HERE for details.
Alternatively, you can run the fantastic PRINTOPIA to print to non-compatible printers using your Mac as a print server.

How to install Messenger Express Multiplexor (MEM)

I have read through the docs, but am still unclear about how to install the Messenger Express Multiplexor. After installing the Messaging Server bits I ran the "configure" script and selected "Multiplexor". Was this the right choice? After that I used configutils to set the parameters that are specified in the docs. I then ran "start-msg mmp". I assumed there would now be a process listening on the port that I specified. This is not the case.
Does anyone have a "installation" guide for a MEM?
Thanks,
Pete Giesin

try
start-msg http
MMP is the imap/pop multiplexor. The Messaging Server's webmail daemon is what's used for http........
I suspect you may have done the install correctly.

Install Oracle 11gR2 Express Edition on Ubuntu Linux 11.04 (64-bit) Howto

h2. Install Oracle 11gR2 Express Edition on Ubuntu Linux 11.04 (64-bit) Howto
Version: B
Author: Dude, 24. May 2011
The following are step by step instructions how to install Oracle 11gR2 Express Edition (Beta) under Linux Ubuntu 11.04, 64-bit.
Access to the Internet is required.
The instructions cover the following additional topics:
- Converting Red Hat based Oracle XE installer to Ubuntu.
- Work-around for missing /sbin/chkconfig tool.
- Install Oracle XE into a different directory or disk volume.
- Relocate and configure the Oracle user and default login directory.
- Uninstall, reconfigure and perform first database backup.
- Notes and web links.
- Troubleshooting
h3. A) System Setup and Prerequisites
h4. A.1. System Access
You will need terminal command line, root and system console access to perform the setup tasks.
To open a Terminal at the system console:
Menu Applications > Accessories > TerminalThe following commands will enable remote ssh login with root access:
sudo apt-get install openssh-server
sudo passwd root
Verify:
ssh root@xe_server_host_nameh4. A.2. Software Prerequisites
The following is required in order to install Oracle 11gR2 XE:
sudo apt-get install alien libaio1 unixodbcThe following is not required, but it will fix backspace and arrow keys in case you prefer using the vi-editor:
sudo apt-get install vimh4. A.3. System Swap space
Minimum swap space required is 2 GB. You can increase swap space if necessary using a swap file:
To analyze current swap space and memory configuration:
sudo cat /proc/meminfo
To install a 1 GB swapfile named swapfile in /, for example:
sudo dd if=/dev/zero of=/swapfile bs=1024 count=1048576
(this may take a while)
sudo mkswap /swapfile
sudo swapon /swapfile
sudo cp /etc/fstab /etc/fstab.orig
sudo echo '/swapfile swap swap defaults 0 0' >> /etc/fstab
Verify:
sudo swapon -a
sudo swapon -sh4. A.4. Kernel Parameters
Oracle 11g XE requires the following additional kernel parameters:
sudo nano /etc/sysctl.d/60-oracle.conf
(Enter the following)
# Oracle 11g XE kernel parameters
fs.file-max=6815744
net.ipv4.ip_local_port_range=9000 65000
kernel.sem=250 32000 100 128
kernel.shmmax=536870912
(Save the file)
Note: kernel.shmmax = max possible value, e.g. size of physical RAM.
Verify: sudo cat /etc/sysctl.d/60-oracle.conf
Load new kernel parameters:
sudo service procps start
Verify:
sudo sysctl -q fs.file-max
-> fs.file-max = 6815744h4. A.5. Oracle Installation Directory
The current Oracle Installation Guide uses the same directory like in previous versions: /usr/lib/oracle/xe/app/oracle/product/11.2.0/server. However, the current Beta installation uses Oracle Flexible Architecture (OFA) and installs into /u01/app/oracle/product/11.2.0/xe. Due to size limitations of Oracle XE it may not be necessary to store the installation to a specific directory or separate volume, but it is possible:
Install Oracle XE to separate disk volume:
From the system console menu: System > Administration > Disk Utility
Select "ext3" filesystem for Oracle compatibility and specify a Volume label, e.g. Oracle.
Notice the device name e.g. /dev/sdb
Get the drive UUID:
sudo blkid
e.g. /dev/sdb: UUID="d19a2d8f-da43-4802-8bdb-0703c855e23a"
Modify /etc/fstab to automatically mount the volume at system startup:
sudo cp /etc/fstab /etc/fstab.original
sudo nano /etc/fstab
(Add the following, using determined UUID, for exmple)
UUID=d19a2d8f-da43-4802-8bdb-0703c855e23a /u01 ext3 defaults,errors=remount-ro 0 1
(Save the file)
Create the mount-point, mount the new volume and set ownership and privileges:
sudo mkdir /u01
sudo mount -a
sudo chown root:root /u01
sudo chmod 755 /u01
Verify:
df -h
or restart the systemYou can also install Oracle XE into a specific directory:
Create a symbolic link to store the installation into an existing directory, for instance:
sudo mkdir /home/oracle-xe
sudo ln -s /home/oracle-xe /u01h3. C) Oracle 11g XE Download and Installation
h4. C.1. Download and convert the Installer from Red Hat to Ubuntu
Please see section E.3. to download the Oracle 11gR2 XE installer.
Select the version listed for Linux x64.
sudo unzip linux.x64_11gR2_OracleXE.zip
sudo alien --to-deb --scripts oracle-xe-11.2.0-0.5.x86_64.rpm
(This may take a while)h4. C.2. Create a special chkconfig script
The Red Hat based installer of Oracle XE 11gR2 beta relies on +/sbin/chkconfig+, which is not used in Ubuntu. The chkconfig package available for the current version of Ubuntu produces errors and my not be safe to use. Below is a simple trick to get around the problem and install Oracle XE successfully:
Create /sbin/chconfig:
sudo nano /sbin/chkconfig
(Cut and paste the following)
#!/bin/bash
# Oracle 11gR2 XE installer chkconfig hack for Debian by Dude
file=/etc/init.d/oracle-xe
if [[ ! `tail -n1 $file | grep INIT` ]]; then
   echo >> $file
   echo '### BEGIN INIT INFO' >> $file
   echo '# Provides:             OracleXE' >> $file
   echo '# Required-Start:       $remote_fs $syslog' >> $file
   echo '# Required-Stop:        $remote_fs $syslog' >> $file
   echo '# Default-Start:        2 3 4 5' >> $file
   echo '# Default-Stop:         0 1 6' >> $file
   echo '# Short-Description:    Oracle 11g Express Edition' >> $file
   echo '### END INIT INFO' >> $file
fi
update-rc.d oracle-xe defaults 80 01
(Save the file)
Set appropriate execute privileges:
chmod 755 /sbin/chkconfig
Note: You should remove the /sbin/chkconfig file after successful installation of Oracle XE.
h4. C.3. Install and configure Oracle XE
sudo dpkg --install ./oracle-xe_11.2.0-1.5_amd64.deb
/etc/init.d/oracle-xe configure
(This will take a while)
Remove the /sbin/chkconfig script, which is no longer needed.
sudo rm /sbin/chkconfigh4. C.4. Relocate and Configure the Oracle user login
The Oracle XE installer specifies /u01/app/oracle as the login directory for the Oracle user. Although not really necessary, the following will relocate the Oracle user $HOME to a standard location and create standard /etc/skel login files:
Exit all Oracle user sessions:
sudo /etc/init.d/oracle-xe stop
sudo kill -9 `ps -ef | grep oracle | grep -v grep | awk '{print $2}'`
sudo userdel oracle
sudo useradd -s /bin/bash -G dba -g dba -m oracle
sudo passwd oracle
Verify:
sudo id oracle
-> uid=1001(oracle) gid=1001(dba) groups=1001(dba)h4. C.5. Setup Oracle environment variables
In order to use sqlplus and other tools, the Oracle account requires certain environment variables. The following will set these variables automatically at every interactive Oracle login:
sudo echo '. /u01/app/oracle/product/11.2.0/xe/bin/oracle_env.sh' >> /home/oracle/.bashrch4. C.6. Oracle sudo root access
It is not essential to allow the Oracle user to use sudo, but it is convenient:
usermod -G admin oracle
Verify:
id oracle
-> uid=1001(oracle) gid=1001(dba) groups=1001(dba),120(admin)
sudo su -
-> Enter Oracle account passwordh4. C.7. Oracle 11g XE Post-installation
After you install Oracle Database XE, its graphical user interface is only available from the local server, but not remotely.
The following will correct the problem if necessary:
Login as user Oracle or use:
su - oracle
sqlplus / as sysdba
At the SQL prompt, enter the following command:
EXEC DBMS_XDB.SETLISTENERLOCALACCESS(FALSE);
exith3. D) Unintstall, Reconfigure and Troubleshooting
h4. D.1. Uninstall Oracle 11g XE
The following will completely uninstall and remove Oracle 11g XE:
Login as user root:
sudo su -
/etc/init.d/oracle-xe stop
dpkg --purge oracle-xe
rm -r /u01/app
rm /etc/default/oracle-xe
update-rc.d -f oracle-xe removeh4. D.2. Reconfigure Oracle 11g XE
Type the following in a terminal window:
/etc/init.d/oracle-xe stop
sudo rm /etc/default/oracle-xe
/etc/init.d/oracle-xe configureh4. D.3. Enable Archivelog mode and perform a database backup
Login as user Oracle:
su - oracle
sqlplus / as sysdba
At the SQL prompt, enter the following commands:
shutdown immediate
startup mount
alter database archivelog;
alter database open;
exit
Login to system console of the Oracle user account:
Select Applications > Oracle Database 11g Express Edition > Backup Databaseh3. E) Notes
h4. E.1. Oracle 11g XE limitiations overview
- It will consume, at most, processing resources equivalent to one CPU.
- Only one installation of Oracle Database XE can be performed on a single computer.
- The maximum amount of user data in an Oracle Database XE database cannot exceed 11 GB.
- The maximum amount of RAM that Oracle XE uses cannot exceed 1 GB, even if more is available.
- HTTPS is not supported natively with the HTTP listener built into Oracle Database XE.
h4. E.2. Documentation and Links
Official documentation for Oracle 11gR2 XE can be found at:
http://www.oracle.com/pls/xe112/homepage
h4. E.3. Oracle 11g XE downloads
The Installer is available from the Oracle Technology Network at:
http://www.oracle.com/technology/products/database/xe
http://www.oracle.com/technetwork/database/express-edition/downloads/index.html
h4. E.4 APEX links and archives
The APEX archives can be found at:
http://www.oracle.com/technetwork/developer-tools/apex/application-express/all-archives-099381.html
The APEX download site is:
http://www.oracle.com/technetwork/developer-tools/apex/downloads/index.html
h3. F) Troubleshooting
... in progress
Regards and best of luck!
Edited by: Dude on May 25, Version B: various corrections. chkconfig package (A.2.) not required.

even though I am admin user.Admin user is a MS Windows term, that does not apply to Linux or Unix in the same fashion.
The configuration script tells you "You must be root user to run the configure script. Login as root user and
then run the configure script."
This is most likely correct because your account is not root and does not have UID 0. What you can do is to login as root e.g. sudo su -, as the message suggest, or use "sudo /etc/init.d/oracle-xe configure", provided your account is defined in the /etc/sudoers file to perform root/admin actions.
Btw, do not modify /etc/passwd and /etc/group to give you admin privileges or try to create a another root account under a different name. That's not the way it works and usually leads to nasty problems.

HT5022 Airport Utility 5.6.1 didn't work with Lion 10.7.4 So I can't install my AirPort Express (Late 2008) !!!!!!!!!!!

Iа somebody can instruct me how to install "old" airport express 5.6.1 on Lion 10.7.4 ?

The info notes on AirPort Utility 5.6.1 indicate that it will not run on Lion 10.7.x. It will run on Snow Leopard 10.6.x or Leopard Macs 10.5.x.
AirPort Utility 5.6 for Mac OS X Lion is what you need, as it can be used on your Mac running Lion to configure both the original and previous generation AirPort Express models.

How to connect old aiport express to my new Airport Extreme? My Ipad says "base station e5713b cannot be configured" and my AirPort tool on my PC will not permit me to add my new Airport Extreme network (no network names to choose from)

How to connect old aiport express to my new Airport Extreme?
I have a PC running with Win7 and just replaced my Jensen With a brand New Airport Extreme.
I have set up the Airport Extreme to the internet, Iphones and Ipads and it work as it should.
I have downloaded latest Version of Airport tool on my PC. In addition i have downloaded the airport tool for Ipad.
I have reset one of my airport Express and it now shows up both on the Ipad and on the PC airport tool.
My Ipad says "base station e5713b cannot be configured."
I have wired the airport Express to my Ethernet to be able to "see it" on my Airport tool.
My AirPort tool on the PC will not permit me to add the airport Express to my new Airport Extreme network (no network names on the drop-down list to choose from). I wished for an easy set-up, but nothing seems to be plug and play as the Commercial says.. can you please help me?
Sigve

Hi
Thanks for Swift reply.
Yep - I in fact have two A1088 and one A1264
I actually bought the new router because the Jensen
router always lost connection to the Airport Express after some hours or days. I
always needed to restart my Jensen to play music and that was driving my wife
mad. The hope was that the Extreme should fix this. Both A1088 have been set up
to only stream music to two of my stereo amplifiers from my PC’s Itunes library.
Are the A1088 now useless?
The A1264 has been set up to feed internet into a Denon Reciever that needed Ethernet cable.
Please advise
Regards
Sigve

I am traveling with my macbook pro and I forgot to install final cut express and quicktime pro before I left. How can I in a way download them for free on my laptop from where I am

I am traveling with my macbook pro and I forgot to install final cut express and quicktime pro before I left. How can I in a way download them for free on my laptop from where I am? I need them and don't want naturally to buy them again!!!
Thank you

Assuming you purchased QT Pro, you can always download it again at no extra charge by logging in to your Apple account.
Regarding FCE, there is no way to download & install the product. You need an original FCE install disk and your FCE serial number.
Final Cut Pro X (aka FCPX) can be purchased & downloaded from the App Store.

HT1199 My mac has OSX version 10.8.2 and I'm try to install an aiport express base station which requires 10.5.7 or later. Yet when I try to install the software it says the base station is not compatible with my mac version - how do I resolve?

My mac has OSX version 10.8.2 and I'm try to install an aiport express base station which requires 10.5.7 or later. Yet when I try to install the software it says the base station is not compatible with my mac version - how do I resolve?

You already have the software installed that you need if you have 10.8.2.
If AirPort Utility cannot find the Express, that is another matter. More software is not needed. More troublehooting is needed.
Power up the Express for a full minute
Hold in the reset button on the Express for 7-8 seconds and release
Allow a full minute for the Express to restart
Click the AirPort icon at the top of the Mac's screen
Look for a heading of New AirPort Base Station
Just below that, click on AirPort Express
What happens?

How can I know which clients are connected to my network through express and which are connected through extreme?

I have an airport express extending, through wireless, a network provided by an airport extreme. How can I know which clients are connected to my network through express and which are connected through extreme?
Here you can see both routers:
I would expect to some clients connected to the express, other than the extreme. And that's all I see: only the airport extreme appears as client of the airport express.
Below, one can see the summary of the config for both routers.
Would somebody explain it?
Thanks,
Marcelo
Message was edited by: Marcelão

please disregard this answer.
Message was edited by: Marcelão

How to install mini SAP in MS SQL Server 2005 Express?

Hi, is anyone know how to install the mini SAP v4.6 by using MS SQL Server 2005 Express?
I get error when connecting to the Database at 88% of the installation.
Please help. Thank you.

I do not think you can install miniSAP 4.6D on MS SQL server 2005 express.
1) you need the up todate patch to run on MSSE. If SAP did the work to allow it to run, it would be patch 55+. As supplied it is patch zero.
2) You can install on MSDE (MS SQL server 2000) patch 4. Look for my post INFO: Installing MiniSAP 4.6D on a named instance of MSDE (MS-SQL).
3) after the install on MSDE SP4 you would have to change the database code page to 'BIN2' look for the OSS note.
4) then you can start patching through to the most recent.
The main reason you cannot do this is MS have changed the version key format to include '.6' as extra info which SAP cannot interprate, too many dots.
MattG.
Message was edited: add URL

How to install networked Epson Expression 10000XL?

Similar Messages

Maybe you are looking for