How to install new card to the existing 15454

i have new cards which is CISCO 2.5Gbps Multi-rate DataMuxponder 4ch 1558.17-1560.61 (15454-DM-L1-58.1=).
if i install to the existing system, is it will affect the system?
do i need to reconfigure the existing system using DWDM metroplanner before install the new cards?
what are the correct steps to install the new cards?
thank you

Hi,
Answers to
1/, no it will not affect your system as these cards are hot pluggable, and as long as you insert into the right slot (refer to the Cisco documentation)
On this Cisco web page, http://www.cisco.com/en/US/products/hw/optical/ps2006/prod_installation_guides_list.html
2/ you should not for minor card addition like this.
3/ you will find the procedure document for the applicable rel of ONS software you are running. The procedure will have a section that documents steps to install various card type.
Hope this helps.
cheers,

Similar Messages

How to create new or delete the existing row in the grid....

hi my friends...
i am developing report using Reuse_alv_grid_display...
my requirement is... At runtime
          1. i may create new row on the grid (empty row inwhich i may enter the data).
          2. i may delete a existing row in the grid
          3. i may edit the existing data...
then i have to trace the modification in the grid in one internal table...
how can i get into this.....
note:
i have some idea to edit the existing record in the grid and trace those modification,
but i don't know abt how to create new or delete the existing row....
can you give me some idea...

Hi deva,
write a class which implemets these methods
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
    METHODS:
To handle the toolbar on alv
     handle_toolbar
       FOR EVENT toolbar OF cl_gui_alv_grid
          IMPORTING e_object e_interactive,
To handle the buttons on the alv grid
     handle_user_command
       FOR EVENT user_command OF cl_gui_alv_grid
       IMPORTING e_ucomm.
endclass.
Now Implement these methods.
CLASS lcl_event_receiver IMPLEMENTATION.
To handle the toolbar on alv
METHOD handle_toolbar.
   DATA ls_toolbar TYPE stb_button.
    CLEAR gs_toolbar.
    MOVE 3 TO gs_toolbar-butn_type.
    APPEND gs_toolbar TO e_object->mt_toolbar.
    CLEAR gs_toolbar.
    PERFORM icon_create USING 'ICON_INSERT_ROW' gs_toolbar-icon.
    MOVE text-010 TO gs_toolbar-function.
    MOVE text-012 TO gs_toolbar-quickinfo.
    MOVE ' ' TO gs_toolbar-disabled.
    APPEND gs_toolbar TO e_object->mt_toolbar.
    CLEAR gs_toolbar.
    PERFORM icon_create USING 'ICON_DELETE_ROW' gs_toolbar-icon.
    MOVE text-011 TO gs_toolbar-function.
    MOVE text-013 TO gs_toolbar-quickinfo.
    MOVE ' ' TO gs_toolbar-disabled.
    APPEND gs_toolbar TO e_object->mt_toolbar.
ENDMETHOD.
   METHOD handle_user_command.
In this form, check the function code(e_ucomm has the function code), based on that do the required action.
as i said yesterday(i.e for appending a row, deleting a row, modifying a row)
    PERFORM user_command USING e_ucomm.
ENDMETHOD
endclass.
Before calling the alv method, create a object of this class.
DATA :
      gref_event_receiver TYPE REF TO lcl_event_receiver,
      gv_tables_alv          TYPE REF TO cl_gui_alv_grid.
      CREATE OBJECT gref_event_receiver.
      SET HANDLER   gref_event_receiver->handle_user_command
                    FOR gv_tables_alv.
      SET HANDLER   gref_event_receiver->handle_toolbar
                    FOR gv_tables_alv.
check this program for event handling, it is the similar way
demo_abap_objects_events
Hope u understood this.
Regards,
Prasant
reward if helpful

How to install new music on the new iMac if there is no cd drive

I am thinking about buying a new iMac and want to know how to install new music if there is no cd drive available.

You could buy an external CD/DVD drive, or do what Apple want you to do: download everything from iTunes!

How to set new value for the existing jar file

Help:
I am wondering if there is a simple to update value for Manifest-Version in a existing jar file?
Thanks!

The jar command's -u option is about as easy as I know.
See the jar command documentation for the details.

How to install new fonts on the system

using java application.
anu

what files (names and extensions) did you download?
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'.

How to add new fields to the DME file in F110

Hi,
We have a requirement add new fields to the file that is used in F110.
.I did go in to DMEE transaction but I hae no idea how to add new fileds to the existing file.
Can anybody please help me in resolving the issue.
Thanks
Venkat
Edited by: Venkat R on Jun 8, 2009 8:45 AM

Hi,
There is no function module for that, We have created our own function module and attached to that field.
Refer the below code. This will fetch the document number.
DATA: lwa_item   TYPE dmee_paym_if_type,
        l_fpayp   TYPE fpayp,
        l_fpayhx TYPE fpayhx,
        first_flag TYPE c,
        lv_lifnr   TYPE lifnr,
        voucher_id TYPE string,
        voucher TYPE string,
        invoice_id TYPE belnr_d,
        voucher_len1 TYPE i,
        voucher_len TYPE i.
TYPES:
BEGIN OF lt_regup,
        xblnr TYPE xblnr1,
        belnr TYPE belnr_d,
END OF lt_regup.
DATA: lt_regup TYPE STANDARD TABLE OF regup,
        lv_regup TYPE regup.
Hope this helps.
Raja.A
Edited by: Raja.A on Feb 16, 2011 7:17 PM

How to Install .CAP file in the Java Card?

Hi Friends..
How to install *.CAP* file in the Java Card?..
I've GPShell script as follows :
mode_211
enable_trace
establish_context
card_connect -readerNumber 2
open_sc -security 1 -keyind 0 -keyver 0 -mac_key 404142434445464748494a4b4c4d4e4f -enc_key 404142434445464748494a4b4c4d4e4f
install_for_load -pkgAID a00000006203010c01 -nvCodeLimit 500 -sdAID A000000003000000
load -file HelloWorld.cap
card_disconnect
release_contextwith that script i can load HelloWorld.cap file successfully..
Now, how to install the HelloWorld.cap file?..
if i add script : load -file HelloWorld.cap i got this error :
install -file HelloWorld.cap
file name HelloWorld.cap
Command --> 80E602001B09A00000006203010C0107A00000015100000006EF04C60201A80000
Wrapped command --> 84E602002309A00000006203010C0107A00000015100000006EF04C60201
A80030C859793049B85300
Response <-- 6985
install_for_load() returns 0x80206985 (6985: Command not allowed - Conditions of
use not satisfied.)i ask this question because when i tried to select the applet through its AID, by this script :
establish_context
card_connect -readerNumber 2
select -AID a00000006203010c0101i got this message error : select_application() returns 0x80216A82 (6A82: The application to be selected could not be found.)
but there's exactly any that AID in my Java Card..
here's is the list of AID from My Java Card :
C:\GPShell-1.4.2>GPShell listgp211.txt
mode_211
enable_trace
establish_context
card_connect -readerNumber 3
* reader name OMNIKEY CardMan 5x21-CL 0
select -AID a000000003000000
Command --> 00A4040008A000000003000000
Wrapped command --> 00A4040008A000000003000000
Response <-- 6F108408A000000003000000A5049F6501FF9000
open_sc -security 1 -keyind 0 -keyver 0 -mac_key 404142434445464748494a4b4c4d4e4
f -enc_key 404142434445464748494a4b4c4d4e4f // Open secure channel
Command --> 80CA006600
Wrapped command --> 80CA006600
Response <-- 664C734A06072A864886FC6B01600C060A2A864886FC6B02020101630906072A864
886FC6B03640B06092A864886FC6B040215650B06092B8510864864020102660C060A2B060104012
A026E01029000
Command --> 8050000008AAF7A87C6013BC0300
Wrapped command --> 8050000008AAF7A87C6013BC0300
Response <-- 0000715457173C2A8FC1FF0200937A55C288805D8F2A04CCD43FA7E69000
Command --> 848201001023CA18742D36165ED992CFF2146C3D51
Wrapped command --> 848201001023CA18742D36165ED992CFF2146C3D51
Response <-- 9000
get_status -element 10
Command --> 80F21000024F0000
Wrapped command --> 84F210000A4F004FF8BE1492F7275400
Response <-- 0CF0544C00004D4F44554C415201000009A00000006203010C010100010AA000000
06203010C01019000
GP211_get_status() returned 2 items
List of Ex. Load File (AID state Ex. Module AIDs)
f0544c00004d4f44554c4152        1
a00000006203010c01      1
        a00000006203010c0101
card_disconnect
release_contextPlease help me..
And please correct me if i'm wrong,,
Thanks in advance..

Any suggestions for my question?..
Please help me..
Thanks in advance..

How to add new row and update existing rows at a time form the upload file

hi
How to add new row and update existing rows at a time form the upload file
example:ztable(existing table)
bcent                      smh            nsmh         valid date
0001112465      7.4                       26.06.2007
0001112466      7.5                       26.06.2007
000111801                      7.6                       26.06.2007
1982                      7.8                       26.06.2007
Flat file structure
bcent                       nsmh         valid date
0001112465     7.8     26.06.2007 ( update into above table in nsmh)
0001112466     7.9     26.06.2007 ( update into above table in nsmh)
000111801                     7.6      26.06.2007 ( update into above table in nsmh
1985                      11              26.06.2007   new row it should insert in table
thanks,
Sivagopal R

Hi,
First upload the file into an internal table. If you are using a file that is on application server. Use open dataset and close dataset.
Then :
Loop at it.
*insert or modify as per your requirement.
Endloop.
Regards,
Srilatha.

How to install new graphic card?

I would like to try to upgrade my graphic card (currently have a GeForce 7300) to run newer games on my pc, but have never opened the back of a computer before. I was hoping someone might be able to help. Is it as easy as just removing the old card and installing the new one?
I was thinking of replacing it with a Geforce 9500 or 9600. My computer has an AMD 6400 dual processor 2.80 ghz with 2 GBs of RAM so the new graphics card should fit, right?
Much thanks for any thoughts and advice.

Yep just remove and replace. Just make sure its the correct type (AGP, PCI-e, etc) thats already in there.
The instructions with the card are pretty simple.
1. unplug computer and remove all cords.
2. lay computer on table.
3. unscrew case screws and slide cover (side cover or whole cover depending on make) off.
4. lay computer on side so you can see the mother board.
5. touch metal chassis before touching any component.
6. unscrew screw that holds the part of the vid card at the back slots.
7. unplug any cable to the vid card.
8. theres a latch that needs to be unlocked before removing card. unlock it (usually slides to the front of the computer, dont force anything)
9. pull vid card straight out.
install new card in reversed order. Make sure you install the new cards software/drivers according to instructions.
King of the World...

How can I write new objects to the existing file with already written objec

Hi,
I've got a problem in my app.
Namely, my app stores data as objects written to the files. Everything is OK, when I write some data (objects of a class defined by me) to the file (by using writeObject method from ObjectOutputStream) and then I'm reading it sequencially by the corresponding readObject method (from ObjectInputStream).
Problems start when I add new objects to the already existing file (to the end of this file). Then, when I'm trying to read newly written data, I get an exception:
java.io.StreamCorruptedException
at java.io.ObjectInputStream.readObject0(Unknown Source)
at java.io.ObjectInputStream.readObject(Unknown Source)
Is there any method to avoid corrupting the stream? Maybe it is a silly problem, but I really can't cope with it! How can I write new objects to the existing file with already written objects?
If anyone of you know something about this issue, please help!
Jai

Here is a piece of sample codes. You can save the bytes read from the object by invoking save(byte[] b), and load the last inserted object by invoking load.
* Created on 2004-12-23
package com.cpic.msgbus.monitor.util.cachequeue;
import java.io.File;
import java.io.FileInputStream;
import java.io.FileOutputStream;
import java.io.IOException;
import java.io.RandomAccessFile;
* @author elgs This is a very high performance implemention of Cache.
public class StackCache implements Cache
    protected long             seed    = 0;
    protected RandomAccessFile raf;
    protected int              count;
    protected String           cacheDeviceName;
    protected Adapter          adapter;
    protected long             pointer = 0;
    protected File             f;
    public StackCache(String name) throws IOException
        cacheDeviceName = name;
        f = new File(Const.cacheHome + name);
        raf = new RandomAccessFile(f, "rw");
        if (raf.length() == 0)
            raf.writeLong(0L);
     * Whne the cache file is getting large in size and may there be fragments,
     * we should do a shrink.
    public synchronized void shrink() throws IOException
        int BUF = 8192;
        long pointer = getPointer();
        long size = pointer + 4;
        File temp = new File(Const.cacheHome + getCacheDeviceName() + ".shrink");
        FileInputStream in = new FileInputStream(f);
        FileOutputStream out = new FileOutputStream(temp);
        byte[] buf = new byte[BUF];
        long runs = size / BUF;
        int mode = (int) size % BUF;
        for (long l = 0; l < runs; ++l)
            in.read(buf);
            out.write(buf);
        in.read(buf, 0, mode);
        out.write(buf, 0, mode);
        out.flush();
        out.close();
        in.close();
        raf.close();
        f.delete();
        temp.renameTo(f);
        raf = new RandomAccessFile(f, "rw");
    private synchronized long getPointer() throws IOException
        long l = raf.getFilePointer();
        raf.seek(0);
        long pointer = raf.readLong();
        raf.seek(l);
        return pointer < 8 ? 4 : pointer;
     * (non-Javadoc)
     * @see com.cpic.msgbus.monitor.util.cachequeue.Cache#load()
    public synchronized byte[] load() throws IOException
        pointer = getPointer();
        if (pointer < 8)
            return null;
        raf.seek(pointer);
        int length = raf.readInt();
        pointer = pointer - length - 4;
        raf.seek(0);
        raf.writeLong(pointer);
        byte[] b = new byte[length];
        raf.seek(pointer + 4);
        raf.read(b);
        --count;
        return b;
     * (non-Javadoc)
     * @see com.cpic.msgbus.monitor.util.cachequeue.Cache#save(byte[])
    public synchronized void save(byte[] b) throws IOException
        pointer = getPointer();
        int length = b.length;
        pointer += 4;
        raf.seek(pointer);
        raf.write(b);
        raf.writeInt(length);
        pointer = raf.getFilePointer() - 4;
        raf.seek(0);
        raf.writeLong(pointer);
        ++count;
     * (non-Javadoc)
     * @see com.cpic.msgbus.monitor.util.cachequeue.Cache#getCachedObjectsCount()
    public synchronized int getCachedObjectsCount()
        return count;
     * (non-Javadoc)
     * @see com.cpic.msgbus.monitor.util.cachequeue.Cache#getCacheDeviceName()
    public String getCacheDeviceName()
        return cacheDeviceName;
}

How to install new applications from my i tunes to i touch

how to install new applications into my i touch without losing the existing ones

Please help me.. I downloaded free applications from apple store, I can see it on the Library's application tab but cannot install it on my iTouch since there is no Application tab on my device. How can I install it? I already updated my iTouch to the latest software.
Thanks in advance..

How to install lan card in solaris 11

Hi,
can some one please tell me how to install lan card in solaris nevada snv_55b X86, 5.11
When i do ifconfig -a it only displays loop back driver only
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
The other driver was missing can please some one tell me how to install that?

Well, the lan card has to be one that is supported by Solaris and you need to have the proper driver installed before you'll be able to get it running. A good starting point would be to look at the Solaris Hardware Compatability List (HCL) at:
http://www.oracle.com/webfolder/technetwork/hcl/index.html
There is a blue box which says "Check out the X86 device list" which may be a good place to start. You won't be able to pick out Solaris version you're running for the OS type menu but if you can find the device anywhere you should at least be able to determine which driver it uses so you can check that against your system. If you don't have the driver package installed, you'll have to install it before you can see the device. If course, if the device isn't supported you're stuck. At least the HCL can help you select a new interface card which should work.

How to CAC (Smart Card) enable the server within JDev

I need to know how to CAC (Smart Card) enable the server within JDev, or if it is even possible.

Kamran,
you are definitely thinking in the right direction.
1) Would I need to export or enter all the existing users of the system presently available through an internal database to the SSO Repository or there is a different way of getting the users to the OID when they first run the url or our Oracle Forms App?
You have a choice: pre-load (probably using LDIF) or create what I call a self-registration process. Pre-load will require the arduous task of gathering the CAC user CN's in advance. This is technically easy but logistically a nightmare.
I created a self-registration JSP which is invoked by a failure to lookup a user in OID. Registration involves requiring a user to enter valid database credentials, testing the credentials (by making a connection) and binding the database userid/password to the CAC identity.
2) How would I get the CAC Certificate CN from the Browser or CAC Card so I can make the comparison to the OID CN?
When you configure the SSO for certificate authentication, the HTTP_Server will pass the SSL variables (which include the CAC certificate which was authenticated in the SSL handshake) to the sso/web application deployed in the OC4J_SECURITY container. You can install your own plug-in that the SSO will invoke where you can retrieve the authenticated certificate and get any of the information therein from Java.
I recommend you get very acquainted with the SSO Admin Guide (esp. Cert authentication chapter), as well as, the Forms Deployment Guide (esp. SSO chapter).
There is too much to fit here. Things would be a lot easier if Forms Server supported enterprise users for authentication to database. Forms apps are relegated to the whole business of RADs and such which gives you X.509 certificate (and thus CAC) authentication but is rather convoluted IMHO (password in the clear in the RAD, orclResourceViewer permission for Forms Server, userid/password login in the background) but that is a different discussion.
Good Luck.
regards,
tt

How to Install Windows 7 Without the Disc

1a) Here is very useful article from PCWorld.com. The article is entitled "How to Install Windows 7 Without the Disc" and means just what it says. The article also has links to Magical Jelly Bean Keyfinder and legitimate Windows 7 ISOs from Digital River, a licensed distributor of Microsoft software. The article lists "Step 1" as;
"Find your Windows 7 product key: Typically this 25-character alphanumeric string is printed on a sticker affixed to your PC or on documentation included with your PC. Alternatively, you can use a keyfinder program such as Magical Jelly Bean Keyfinder to pull your product key from the Registry. You need your product key to reinstall Windows."
1b) Using a key finder, however, is only useful if the Windows 7 product key was printed on a sticker (Microsoft Certificate of Authenticity) affixed to your PC, on documentation included with your PC, or sent via email by Microsoft. Assuming your computer came from one of the big brand computer manufacturers... HP, Sony, Dell, Gateway, etc... as most do, it uses a generic "mass activation" OEM SLP key. Trying to use this key by itself isn't going to work. This OEM SLP key needs to be mated with an OEM SLP certificate and an appropriate OEM BIOS with a proper SLIC table.
1c) Here is where ABR Beta With Windows 7 Support comes to the rescue. Follow the "How to use it" section of ABR for Windows Vista for information and instructions on how to use ABR. The steps listed for Vista apply to Windows 7 as well. Perform the "activation backup" to "backup" and save the OEM SLP key and OEM SLP certificate. Save the entire ABR folder to an external location for later use. This will allow you to pre-activate your "clean" Windows 7 install on the computer you pulled the key and certificate from.
1d) Now install Windows 7 from your new "Windows 7" disc or USB stick, following all prompts as needed. Don't enter a Windows 7 product key if request. Also, don't allow Windows to try to auto-activate. Once Windows is fully installed, run ABR "activation restore" to "restore" the previously backed up product key and certificate to the new Windows 7 install. Verify that Windows is activated, repeat "activation restore" if needed.
2) Here is another useful article, this time from SevenForums.com. This arcticle is entitled "Clean Reinstall - Factory OEM Windows 7" and provides detailed steps required to backup your computer, audit current hardware and software, locate software and drivers, install and activate Windows 7, and create a Windows 7 Backup Image of your fresh install.
Good luck.
Links to additional Windows 7 SP1 "Editions" and "Languages" can be found HERE and HERE.
Link to "ei.cfg Removal Utility". The "ei.cfg Removal Utility" is a simple tool that will remove the ei.cfg from any Windows ISO disc image, thereby converting the image into a "universal disc" that will prompt the user to select an edition during setup instead of being forced to use different discs for different versions of Windows 7.
Direct link to Windows 7 USB/DVD Download tool.
<Cross posted to Notebook Operating Systems and Software for Notebook, Laptop, and Netbook users>
EDITED by Frank on 8/28/2013
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

ervis,
Before formatting the hard drive you should have been able to use the HP Recovery Manager to create your recovery discs or perform a system recovery. This is provided the recovery partition wasn't already corrupt or damaged. If the "D:" HP Recovery partition is missing or damaged and you don't have a set of HP Recovery Discs, you will need to use the information in my previous post to get your computer up and running again.
The information in the document referred you to applies to several different "types" of installations;
Using ABRbeta is only needed if you have an active OEM factory SLP (system locked preactivated) installation of Windows. You use ABR to pull the factory key and certificate off the computer, to reuse it on the same computer with a clean Windows install.
If you are just installing Windows and are going to use the Windows 7 product key on the COA on the side of your computer, all you need to do is download the same version of Windows that your key is for and burn the ISO. Now install Windows answering or following all prompts as needed (except do not enter the Windows product at this time... it will be entered later). Once Windows has completely installed, enter the key and activate it. Your Windows 7 OA key should work on a SP1 install without issue.
The only thing I see that could mess things up, is the language of the install. If you are still having trouble activating Windows, please reference the ISO you download and a post a photo of your Windows COA
with the key erased or Xed out.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Need to add 2 new columns to the existing table control of C223 transaction

Hi ABAP Gurus,
I have to do a screen enhancement for transaction C223.
Below is the requirement:
need to add 2 new columns to the existing table control of C223 transaction.
there is no customer exits, screen exit or user exit present for this transaction C223, i have found one enhancement spot for this transaction.
i dont have any idea how to do this in standard transaction C223, the table control in C223 saves the data to MKAL table and the table control uses the structure MKAL_EXPAND in the screen program.
i have created an append structure for the 2 fields to the standard table MKAL.
Can anyone please suggest me how this can be done in standard screen C223, will the enhancement spot can be used to do this....
please sugest...
Thanks & Regards

Hi Santosh,
Thanks for the reply. I have looked into this Enhancement Spot CPFX_SCREEN_SET , inside this there is only one method INPUT_DISABLED having below parameters
IM_MKAL     Importing     Type     MKAL                                                                                Production Version
EX_MSGID     Exporting     Type     SY-MSGID                                                                                Messages, Message
EX_MSGTY     Exporting     Type     SY-MSGTY                                                                                Messages, Message
EX_MSGNO     Exporting     Type     SY-MSGNO                                                                                Messages, Message
EX_MSGV1     Exporting     Type     SY-MSGV1                                                                                Messages, Message
EX_MSGV2     Exporting     Type     SY-MSGV2                                                                                Messages, Message
EX_MSGV3     Exporting     Type     SY-MSGV3                                                                                Messages, Message
EX_MSGV4     Exporting     Type     SY-MSGV4                                                                                Messages, Message
EX_INPUT_DISABLE     Exporting     Type     CHAR1                                                                                Display Only if X Was Set
the BADI definition present here is a SAP internal so we cant implement the BADI , but we can created a enhancement spot implementation for this. as per my understanding on this the enhancement spot is only for making the table control fields display / change . i dont think this can be used to add two new coloumns to C223 table control.
I am not sure thats why seeking your help/valuable sugestion on this.
Please provide your sugestion on this , so that i can come to conclusion on this issue.
Thanks & Regards
Siddhartha Mishra

How to install new card to the existing 15454

Similar Messages

Maybe you are looking for