How to install OAS ON Turbolinux 4.02
I have installed OAS 4.07 on Turbolinux, but I cannot start it. Can you tell me how to install and config OAS 4.07 on linux. Thank you for your help!
It has nothing to do with the vendor.
When I was at 10.4.6 on all drives, the samples installed fine on any drive.
Now the main HD (which I upgraded, meaning new HD) has 10.4.8.
The other HD's are 10.4.6 and show a RED "!" and I can't install the samples there. Never had a problem when the OS was the same for all the Hard Drives.
Any idea why this would be? Surely there must be a fix for this!
Thanks!
Similar Messages
-
How to install OAS Server Control in 10.1.3.1
I have a server where OAS 10.1.3.1 is installed and running, but it looks like the OAS Server Control was not part of the initial install. I need to go in and change some timeout settings but am not sure how to get to those settings without the Server Control web interface. Can I install this separatly without affecting what is already setup?
Thanks,
D. ScholzAre you sure AS Control wasn't installed with this AS instance? I am thinking it might be there but just not running. Check to see if you have an entry for application name="ascontrol" in your $ORACLE_HOME/j2ee/home/config/server.xml file? Also check if you have "ascontrol.ear" file and "ascontrol" directory under $ORACLE_HOME/j2ee/home/applications directory. If you do, chance are, AS Control is already deployed but just not running.
Check what does "opmnctl status -app" shows? If it shows the state of ascontrol application as "stopped", you can start it using "opmnctl startproc application=ascontrol".
Thanks
Shail -
How to install OAS Server Control after initial install
I have a server where OAS 10.1.3.1 is installed and running, but it looks like the OAS Server Control was not part of the initial install. I need to go in and change some timeout settings but am not sure how to get to those settings without the Server Control web interface. Can I install this separatly without affecting what is already setup?
Thanks,
D. ScholzNo you can't, I read in a note that you can configure it after installation, so you may need to reinstall in order to have it.
Other way is to install a new server and create a Cluster configuration, and you could have both servers administrated by one EM console.
For this, after install the new instance (checking the box to configure EM console that is one of the final screen in OUI before start the install process), stop all services, then add to opmn.xml file in both instances this:
*<notification-server interface="ipv4">*
*<topology>*
*<nodes list="app01:6201,app02:6201" />*
*</topology>*
*</notification-server>*
Of course app01 and app02 are the name of the appservers (hostnames) and the ports are for the Remote port of opmn, that you can look at them in opmn.xmml file also.
At the end you will only need to make a opmnctl start, then opmnctl reload and finally opmnctl startall, to check that this work, you can run opmnctl @cluster status and it will have to show you the status of both instances, finally, if you can see both instances in opmn, you may try to check Em console, you will see both instances too..
Hope this helps.
Regards -
How to install oas 407 for linux
when i install close,but couldn't start up
$owsctl start
waiting..... orb,
how could i to do.
redhat 6.1,oas407 for linux.
nullAre you sure AS Control wasn't installed with this AS instance? I am thinking it might be there but just not running. Check to see if you have an entry for application name="ascontrol" in your $ORACLE_HOME/j2ee/home/config/server.xml file? Also check if you have "ascontrol.ear" file and "ascontrol" directory under $ORACLE_HOME/j2ee/home/applications directory. If you do, chance are, AS Control is already deployed but just not running.
Check what does "opmnctl status -app" shows? If it shows the state of ascontrol application as "stopped", you can start it using "opmnctl startproc application=ascontrol".
Thanks
Shail -
How to install the Oracle Apps R12 with an existing OAS 10g
Hi All,
I am planning to install the Oracle Apps R12 and I already downloaded the media-pack from edelivery.oracle.com.
But I am not sure how to do it because I have tree-tier architecteur at home :
One computer with LINUX OS (OEL 5.5) which hold the Oracle Database 11gR2 -- Database tier
One computer with LINUX OS (OEL 5.5) which hold the Oracle Application Server 10g ver 10.2.0 (infra and middle) -- Midel-tier
One computer with XP OS -- Client tier
Could any one explain me how to install it?
Regards,But I am not sure how to do it because I have tree-tier architecteur at home :
One computer with LINUX OS (OEL 5.5) which hold the Oracle Database 11gR2 -- Database tier
One computer with LINUX OS (OEL 5.5) which hold the Oracle Application Server 10g ver 10.2.0 (infra and middle) -- Midel-tier
One computer with XP OS -- Client tier The above is two tier architecture (not three tier) as the client tier is not considered as a tier in Oracle Apps installation.
Could any one explain me how to install it?Do you already have a Database and Oracle AS10g installed? Please elaborate more.
Oracle Apps R12 comes with 11gR1 database, and to do multi-node installation please refer to these threads.
R12 Multinode installation
Re: R12 Multinode installation
Install oracle EBS R12 on 2 machines
Install oracle EBS R12 on 2 machines
To upgrade the database later to 11gR2, please refer to:
11gR2 11.2.0.2 Database Certified with E-Business Suite
http://blogs.oracle.com/stevenChan/2010/11/db_11gr2_11202_ebs.html
Thanks,
Hussein -
AIX OAS 10.1.3 Install How to Install EM Console
Hi,
I have been searching for this answer everywhere but couldn't find a solution so I was hoping some of the experts here could help. So I installed OAS 10.1.3 (J2EE Server and Web Server) on AIX using X11 for my GUI and configured the install for advance, specified ports and gave a default OC4J instance. However, I forgot to specify the instance as an admin OC4J instance so when I go to the URL, I don't see a application server control link since the EM is built into the default oc4j now and appending /em gives me a not found. So I was wondering is there any way to install or configure the default oc4j to be an admin without a reinstall? Please let me know, thanks!Hi
appending /em gives me a not found. I am not sure of what has been said above. But have you checked links from the readme file?
$ORACLE_HOME/install/readme.txt
Further,
This is my link for the Enterprise Manager Database Control:
http://test1.techstat.com:5500/em
This is link for Enterprise Manager Application Server Control
http://apps1.techstat.com:1810/emd
Hope it helps.
Adith -
How to install APEX in a server database, instead XE database?
Hi, sorry but I'm new with APEX.
Till today I've just used it to simple applications inside a XE database, but now I've to use it in a production database.
Should I use the enterprise database, which is an Oracle 11G, or should I install it inside the database that comes with the Oracle Application Server (OAS)?
Is there a documentation to teach how to install the last version of Apex inside this database?
Thank you in advance and sorry for the silly question?You can install APEX in a regular database - documentation is at http://docs.oracle.com/cd/E23903_01/welcome.html
HTH
Srini -
How to install only Discoverer ?
Hi everybody,
I'm trying to install OAS 10g (9.0.4) on AIX 5.3 dedicated server.
Repository will be install on another Server containing an already active RBDMS 9.2.0.7.
How can i proceed to install my repository on my existing db and only discorervr components.
No need of internet directory or any other components!
I only need Discoverer plus/viewer on server 1 and db on server2.
Thnx in advance,
HichemIn 9.0.4 you would start a normal application server install and select the Business Intelligence option. You can install this without Identity, Portal, none of the other components. By installing the Business Intelligence option it also installs the stand alone versions of forms and reports with Discoverer. You can disable their container after installation if you do not want them running. If you have any questions just let me know and I can walk you through it.
Matt Topper
TUSC, The Oracle Experts.
[email protected] -
How to install Oracle AS JMS Adapter on Websphere (or any J2EE server)
Hi,
We have a requirement in which the client wants to connect to the OC4J JMS running in SOA Suite (Oracle Application Server 10.1.3.4).
They are using Websphere. We are exploring ways by which they can connect from Websphere application to Oracle AS OC4J JMS.
One option is - deploy the Oracle AS JMS adapter in Websphere and then use it to connect to the OC4J JMS.
Please let us know if this is the right approach. Also, if so, kindly point to the documentation regarding how to install the JMS adapter on 3rd party J2EE servers such as websphere.
Rgds,
AmitWhile searching the knowledge base I found the following note, which seems to suggest that Oracle Adapters are not deployble on other J2EE application servers:
Support For Jca Adapter In Other Application Servers Like Jboss [ID 1114738.1]
==============================================
From the statements in documentation it may be implied that jca adapter should be deployable on any application server that is compliant with j2ee/jca. Please note that this cannot be implied at this time and jca adapter cannot be deployed on other application servers than OAS in BRM 731 due to some technical constraints. So currently we can support only OAS and not JBoss or another application server , in BRM 731. The documentation will be updated accordingly to reflect this. -
DBConsole Service doesn't start after Install OAS F&R-Services Win 10g
Windows DBConsole Service doesn't start after Install OAS F&R-Services
Hello,
we have installed:
WINDOWS Server 2003 with SP 2
Oracle 10.2.0.1
OAS F&R Services 10.1.2.0.2
after Install DBR2 EM / DBConsole did work
after Install OAS F&R-Service
the windows-service for DBConsole
doesn't start, return with an Error Code 2
see below
the file named emdbconsole.nohup from output log
is not to find
the ias_console does work fine
OAS F_R-Services do work too
whats may be wrong ?
regards
Norbert
OracleDBConsoleorclsrvc.log :
EMDROOT=D:\oracle\product\10.2.0\db_1
ORACLE_HOME=D:\oracle\product\10.2.0\db_1
EMDSTATE=D:\oracle\product\10.2.0\db_1\kfin_orcl
CONSOLE_CFG=dbconsole
TRACE_LEVEL=16
TIMEOUT=15
12/14/09 13:13:08 Start pending...
12/14/09 13:13:08 Verifying dbconsole is not started already. Command line "D:\oracle\product\10.2.0\db_1\bin\emctl.bat" istatus dbconsole
12/14/09 13:13:09 dbconsole launch commandline is "D:\oracle\product\10.2.0\db_1\bin\emctl.bat" istart dbconsole
12/14/09 13:13:09 Tracking process launch...
12/14/09 13:13:39 dbconsole exited with retCode 2.
12/14/09 13:13:39 Check D:\oracle\product\10.2.0\db_1\kfin_orcl\sysman\log\emdbconsole.nohup for details
Edited by: astramare on Dec 15, 2009 8:43 AMHi,
1. Stop the DBConsole. (set ORACLE_SID first & ORACLE_HOME)
cd %ORACLE_HOME%\bin
emctl stop dbconsole
2. Update the <ORACLE_HOME>/<hostname_sid>/sysman/config/emd.properties file.
Change line from:
tracelevel.main=WARN
To
tracelevel.main=DEBUG
Decomment this line, so that the line becomes :
EMAGENT_PERL_TRACE_LEVEL=DEBUG
3. Update the <ORACLE__HOME>/<hostname_sid>/sysman/config/emomslogging.properties
Change line from:
log4j.rootCategory=WARN, emlogAppender, emtrcAppender
To
log4j.rootCategory=DEBUG, emlogAppender, emtrcAppender
4. Remove/backup all log files from ORACLE_HOME/<hostname_sid>/sysman/log
5. Start the dbconsole and upload the output of each command
- start the dbconsole: "emctl start dbconsole"
- issue "emctl clearstate"
- status the dbconsole: "emctl status dbconsole"
- check the status of the agent until it comes up: "emctl status agent"
- force an upload: emctl upload
6. Check If you are able to view the dbconsole Page & login
check below logs may be you can see the close error messages to solve the issue.
<ORACLE_HOME>/<hostname_sid>/sysman/log directory
<ORACLE_HOME>/<hostname_sid>/sysman/config/emoms.properties
Otherwise re-create the DBconsole using the metalink doc 278100.1 : How To Drop, Create And Recreate DB Control In A 10g Database. (Please check the steps from Recreate/ReConfig DB Control, if you want to re-create)
Thanks. -
How to install Apache module mod_rewrite
Kindly tell me, how to install Apache module mod_rewrite which is a standard module in the Oracle HTTP Server (OHS).. I have installed OAS(10.1.2) but mod_rewrite module is missing..
Edited by: SrinivasanSeniorDBA on 26 Feb, 2010 2:42 PMGot it
-
REP-3000 error after installing OAS 10.1.2.0.2
Hello All,
I've searched the forum and it looks like REP-3000 is a common error encountered when DISPLAY or NLS_LANG aren't set up properly. However, my variables are setup properly. I can run xclock without any problem.
This is after a brand new installation of OAS v10.1.2.0.2 (only forms and reports services). I already had the rdbms software installed v10.2 on my AIX server. I've installed OAS in another ORACLE_HOME.
After the installation, i tried to run the demonstrations....The forms services is ok but not the reports services. I know the variables are set properly but not sure what else to try. I've updated scripts like report.sh and rwrun.sh to add the DISPLAY variable there. I've also altered the opmn.xml file per some other documentation but to no avail.
Has anyone done this Forms and Reports Services installation on AIX or any non-windows server?
Thanks.I checked the Metalink note# 264159.1 (I am setting the paramform=no when calling the report) as indicated in this document. Bug#3442598 status is "Fixed in 10.1.2.0.2" in Metalink. Is this might be another bug ?
FS, thank you for replying but using a table does not seem to be as a viable option - it is against the idea of dynamically striping the where clause on the form side. I have no problem passing individual parameter or group of parameters from forms to reports. This only happens if I dynamically strip the where clause from the system.last_query and pass it to the report. I don't know how to decipher the dynamically stripped where clause and parse it into individual values (parameters) that I can pass into the report. I just want to pass the where clause of the last executed query to the report. If we can not do it, what is the point of dynamically striping the last query. You mention putting the values into a table, can you please elaborate how should I parse the where clause that form generates (should be dynamic) into a table? The selected columns in each query can be different each time the users execute a custom query. This is why I don't think this table method you suggested will work. Maybe I am wrong. Have you done this before? Have you dynamically parsed a dynamically stripped forms query into table/s ? Any working example is really appreaciated.
I did not understand the length of the URL ? the P_WC user variable on the report side is 2000 characters long - more than sufficient to hold the where clause. What is the limit on the URL length? The error message shows the entire where clause with added %22 and %20 's - therefore I don't think the URL length is an issue here. But I maybe wrong. If the URL length is an issue, then the error message is ambiguous.
Thank you. -
How to install 10.1.3 & 10.1.2 on same server ?
Hi experts,
We have the requirement to install OAS 10.13 & 10.1.2 on same box.
Application :
ADF Faces + BC4J on 10.1.3
Oracle Reports Services on 10.1.2
Is it possible ? How can I do that ?
Thank you for your help,
xtantoHi Xtanto,
Once again, if U 're on unix /linux platform just take this scenario.
One user for both installtion can be or two different users as you like.
under /u01 U can install BI with user oracle1
under /u02 u can instal your rep.server.
if U choose one user for both installtion, then U can create two scripts one with the environement variable for BI & the other one with the env. for rep server.
Cheers,
Hamdy -
How to Install and deploy Oracle Discoverer in Oracle AppServer 10.1.3.2
I need to know how to install and deploy Oracle Discoverer in Oracle Application Server 10.1.3.2?
Hi
Discoverer doesn't install into OAS 10.1.3.2. It uses 10.1.2.1 or 10.1.2.2.
When you install Discoverer it installs its own OAS components.
Best wishes
Michael -
How to Install Oracle webserver???
Hi, i live in Mexico and how to install Oracle PL/SQL web ToolKit???
ThanksThis is very old and obsolete software.
However metalink still have docs for it. You can search metalink for more detail.
OAS 4.0.8.1 Release Notes (NT)
Doc ID: Note:76509.1
System Requirements
Microsoft Windows NT
Hardware Minimum Requirement
CPU
A Pentium level processor
Memory
128 MB
Disk space
240 MB
Swap space
256 MB
UNIX
Hardware Minimum Requirement
CPU
A SPARC processor
Memory
128 MB
Disk space
400 MB
Swap space
256 MB
Maybe you are looking for
-
Job Scheduling in Solution Manager - Error creating Periodic Job
Hi all, I am in the process of testing the Job Scheduling functionality using the Solution Manager. I have setup the criteria manager, ec. in the satellite system, and done the config in Solman as well. I am able to successfully setup up a 'on-time
-
I use Picasa to create web albums, and I tag people who appear in the pictures. With Explorer, the name tags do not appear on the pictures until I mouse over a specific person, at which point the tag appears. With Firefox, the name tags appear as soo
-
Strategy for Granular Modularity
I have a RoboHelp 9 project that documents the installation and configuration of a software package that can include add-in components. Currently, the core instructions and add-in instructions are all in one RoboHelp project, with condition tags to i
-
Canada - Bank transit number - routing code
hello! I am working in a Belgian company using ECC 6.0 and I have to pay a vendor which is in Canada. My bank told me i have to add the Canadian routing number (in French : code de transit) before the bank account. But in SAP, i dont know where shoul
-
Mp3 icon does not display artwork
Good afternoon, Hopefully someone can help regarding a mp3 icon artwork issue (albiet minor). I will user Tagr to change the tagging info as well as add artwork, and normally, when it's saved, the icon will change from the default black-with-notes to