How to install Oats linux agent

hi,
Already i have installed oracle database 11G release1in oracle enterprise linux5(32 bit).Now i need to install oats-linux-agent-9.00.1355 in my existing database.
provide me the solution for installing it.

Hi
Have you tried following the instructions in the HowToInstall.txt file located in the oats-linux-agent-9.00.1355.zip ?
Regards
Alex

Similar Messages

How to install redhat linux on my macbook pro marvericks osx as a dual boot

how to install redhat linux on my mac as a dual boot

I can use disk0s4 to install linux. I have already partitioned it for the vmware.

How to install in linux Enterprise Edition 6.0

How to install in linux Enterprise Edition 6.0

Hi Dipendra,
For running the Adobe application You need to configure some thing in both Java as well as in ABAP stack for that abobe form application to work. You need to do some configuration in the Visual administrator for Java & also in the ABAP stack sidi using your SAP user id line creating ADSUSER , ADS_AGENT user id creation and roles assignment and RFC destination creation etc..
Just refer these documents for the installation and post-configuration of Adobe Document Service on NW2004s.
https://websmp105.sap-ag.de/~sapdownload/011000358700003982082006E/InstallADSNW2004s_Jun06.pdf
https://websmp105.sap-ag.de/~sapdownload/011000358700005526362005E/ADS_NW2004s_SPS12.pdf
https://websmp105.sap-ag.de/~sapdownload/011000358700005299622006E/ADS_SizingNW2004sV2_1.pdf
You can start by read the note 736902 to get the credentials for the ADS.
Hope this answers your question.
Thanks,
Greetson

How To: Install a Client Agent link broken

I wanted to know if there was a new version of the agent and found the link broken
[Quote]
When you select an agent from the table of sync groups and sync agents on the SQL Data Sync landing page, you go to the sync agent page.
SQL Data Sync Client Agent
When you select a client agent from the SQL Data Sync landing page, three buttons appear at the bottom of the page.
REFRESH
MANAGE KEY
Create a new agent key. After you create an agent key, launch the agent and submit the new key value.
DELETE
Delete the selected client agent.
For more information on Client Agents, see the topics
How To: Install a Client Agent,
How To: Register a SQL Server database with a Client Agent, and
How To: Change an Agent's Key on MSDN.
[/Quote]
I keep getting redirected to http://www.microsoft.com/fr-fr/default.aspx

Hi,
Thank you for the feedback. I will have the relevant team notified.
You can have a check on the below link for SQL Data Sync (Preview) Client Agent.
http://msdn.microsoft.com/en-us/library/azure/jj823137.aspx
Regards,
Mekh.

Sun Management Center - how to install the SMC agent on linux

Dear Gents,
I have one X86 Solaris Server configured and installed to be Sun Management Center Server.
successfully i could monitor the Sun Solaris Servers after i have installed the SMC agent on them.
my problem is that i could not install the SMC agent on Red Hat Linux. as i could not find an easy document or steps to do so.
could you guide please?
appreciate your support and cooperation
Best Regards
Hisham

Hi Hisham,
hishooooo wrote:
Dear Gents,
I have one X86 Solaris Server configured and installed to be Sun Management Center Server.
successfully i could monitor the Sun Solaris Servers after i have installed the SMC agent on them.
my problem is that i could not install the SMC agent on Red Hat Linux. as i could not find an easy document or steps to do so.
could you guide please?If you still have a copy of your SunMC media around, the same ["es-inst"|http://docs.sun.com/app/docs/doc/820-2215/command-line-1?l=en&a=view] program you use to install Solaris Agents should work on Linux as well. It autodetects OS type and will install Solaris packages or RPMs as appropriate.
Regards,
[email protected]
http://www.HalcyonInc.com

How to install the windows7 agent and monitor the same machine

Hi ,
I have installed OMS on Oracle Linux 5.7-64 bit machine. Now I am able monitor the OIM which is installed on Linux. I have some of oracle applications (domains) on windows7 machine. I want monitor the same. On em, agent deployment page I am not able to see the windows agents.
Can you please guide me how to install the agent on windows and monitor the same?
OEM version: 11.1.0.1
Thanks in advance
Regards,
Kishore Tummeti

If you just need to install some agents on Windows the best (imho) option is not to use the push option because getting Cygwin to run can take hours (if at all).
Here you find a good instruction how to install the agent by hand: http://www.peasland.net/?p=122
Sometimes the –silent mentioned in step 4b needs not to be put as second argument but as last argument.
Eric

How to install interMedia web agent

Hi folks,
I downloaded im8154_lnx.zip (interMedia Web Agent 8.1.5.4) for linux
from Oracle. The webserver I am using is Oracle HTTP server.
Before I install the web agent, the HTTP server works fine.
I read the document for installing interMedia web Agent, however,
it is not the case when I tried to install the agent. For example,
the doc asks me to include mod_oraordwscias.conf in the oracle_apache.conf file,
but the mod_oraordwscias.conf file doesn't exist. I only have three
files in the /ord/web/apache/:
mod_oraordwsc.c mod_oraordwsc.h mod_oraordwsc.module
I also don't understand what's the file mod_oraordwsc.module for.
Does anyone know how to make the interMedia Web Agent module works with
Oracle HTTP server? Thank you so much.
Best regards,
Kai Huang

Hi Kai,
The interMedia Web Agent is not available for the Oracle HTTP
server on Linux, nor are there plans to port it or support it on
any platforms or web server configurations other than those shown
below. For information on alternatives to the Web Agent,
please see the interMedia software page on OTN:
http://otn.oracle.com/software/products/intermedia/software_index.htm
The closest equivalent of the Web Agent is the interMedia Code
Wizard for the PL/SQL Gateway.
Regards,
Rajiv
Platforms/web server configurations supported by interMedia Web Agent:
Platform
Web Server Solaris Windows NT Linux
Oracle HTTP Server 8.1.5.4.1 8.1.5.4.1 Not available
powered by Apache
Apache Web Server 8.1.5.4 8.1.5.4 8.1.5.4
from www.apache.org
iPlanet Web Servers 8.1.5.4 8.1.5.4 8.1.5.4
from Netscape/Sun
Microsoft IIS Not applicable 8.1.5.4 Not applicable
Oracle Application 8.1.5.4 8.1.5.4 Not available
Server
Note that 8.1.5.4.1 is the latest (and only) version of the Web Agent
installation kit maintained on OTN. Please see the OTN page for more
information on supported Oracle client (OCI) versions.

How to install grid control agent

Hi All,
I have a two node rac cluster 11gr2 named rac1,rac2.And I have also installed OEM 11g on RHEL 5 on node3 i.e rac3.
Now i want to install agents on all of the rac nodes.And i have a oracle 10g agent.
Can anybody let me know how to install the agent and will there be any compatibility issues be there or not?

you can start with
How To Install Oracle 10g Grid Agent on RAC
http://repettas.wordpress.com/2007/10/21/how-to-install-oracle-10g-grid-agent-on-rac/

How to install Oracle Grid Agent 11g into windows hosts ?

Hi there, I was not able to deploy management agents into windows hosts machines !
I followed steps below and I am getting these errors :
On windows 2003 server, I have downloaded grid agent here :
D:\grid\Windows_X64_Grid_Control_agent_download_11_1_0_1_0\windows_x64\agent
I have setup.exe file ! When I double click it, I got this message :
Only silent installation is supported search help.
Well, I did a lot of times setup.exe -silent -responseFile <path>additional_response.rsp and the setup process tells me that I am not following the security procedures.
I am newbie on Grid!
I don´t want deploy agent using deployment wizard due to security resctrictions, they do not allow openssh servers on windows servers.
Have you guys succeeded with this installation ? I mean, install fresh agent on single target windows server machine!
I would appreciate any help.
Tks.
Edson - CLARO

Edson,
what I would do is go for the cloning option.
On the OMS Server an Agent has been installed as part of the OMS installation.
Stop this Agent
AGENT_HOME/bin/emctl stop agent
Create a zip file from the agent11g folder
Copy it to a server where you want to install the Agent
unzip the folder in the location where you want to install
Restart the Agent you had stopped on your OMS server
AGENT_HOME/bin/emctl start agent
On the destination server
Then from the AGENT_HOME/oui/bin
runInstaller -clone -forceClone ORACLE_HOME=<full path of Agent Folder> ORACLE_HOME_NAME=OracleHomeAgent11g -noconfig -silent b_chainedInstall=false oracle.sysman.top.agent:s_installType=AGENT
Then from AGENT_HOME/bin/agentca -f
AGENT_HOME/root.sh (Under Unix this needs to be run as user root, not sure if this procedure is the same under Windows)
This is based on the procedure described in MOS note : How to Clone a Management Agent And Known Issues [ID 579156.1] which referes to a 10.2.0 Agent, but I have been able to use this procedure under Windows with a 11.1 Agent as well.
Goodluck
Regards
Rob
http://oemgc.wordpress.com

Issues with install of linux agent micro install on RHEL 5.2.

Hi All,
I have a linux machine, doing ssh to connect to it and then launch vncviewer to get the access. When I run the ./setup.sh it gives me libmawt.so: libXtst.so.6: cannot open shared object files: No such file or directory. Anyway to troubleshoot this issue.
Thanks,
Nags.

Oh wait, now that I re-read your message I see you are not having a problem with VNC. This document page is a continuation of my OATS install process on Linux. For the install, you need to be sure the user which is logged into the Linux UI has proper rights access to the unzipped install files.
https://github.com/glennschler/oats-linux-ec2/wiki/OATS-Install

How to Install ZENworks Adaptive Agent on Macintosh

This might sound ridiculous, but I am really new at Macintosh and cannot get the Agent to install. To be upfront, my ZCM is currently at version 11.2.0 and I realize it probably won't work on my new 10.9.1 Macintosh Maverick computer. Nevertheless, what is the proper method of installing the agent on the Mac?
I installed the latest Java, since I assumed the bundled Java wasn't supported on Maverick. I then downloaded the .bin and tried that...no luck. I then extracted the .bin on a Windows computer with 7zip and then I tried to run the .pkg on the Mac. It said it installed successfully, but I don't see any processes or anything related to ZENworks.
Any info would be appreciated.

Trkneller,
> I realize it probably won't work on my new 10.9.1 Macintosh
> Maverick computer.
it won't work, and it won't show anything. You'd need the 11.3 agent when that version's released, for Mavericks. At the moment, the only scenario that works is for the agent to be installed on an earlier version before being upgraded to Mavericks, sorry
But here's how you'd do it if it did work... http://www.novell.com/documentation/...a/bxmk87s.html
Shaun Pond

[SOLVED]How to install Arch Linux UEFI to dual-boot?

Hey,
so I have a Lenovo G50-70 on which I want to have a Windows-Arch dualboot. I followed the Beginner's Guide, installed Arch but ended up with an inaccessible Windows. I could boot into Windows from the BIOS utility, but not from the gummiboot bootloader.
The guide said if I wanted to dual-boot, I must leave windows EFI partition alone, which I did. I have my Windows partitions set up the Windows way, with the system reserved and EFI and recovery partitions, and I have my Windows partition of course and a data partition. After that I have some unallocated space, on which I made the Arch partitions, /dev/sda6 as an ESP partition for the EFI files, /dev/sda7 as root, /dev/sda8 as swap and /dev/sda9 as /home. The install process went without any error, then I made some configurations and installed dosfstools & efibootmgr. After that, I installed gummiboot and ran "gummiboot --path=/boot install". After that I created the configuration files exactly like in the guide, unmounted the partitions, rebooted and saw that there's no (easy) way getting into Windows. So my question is: how can I install Arch to have a working dual-boot system?
Thanks for any help in advance!
Regards, Matteussz
Last edited by Matteussz (2015-02-11 20:41:37)

Hey,
Writing to you on my working dual-boot with ArchLinux (Windows 8.1 64-Bit, UEFI)
So first step I've done is creating free space of an existing partition in the windows disk management (windows button and r and then type diskmgmt.msc). At this step, you have to record which partition your efi partition is (just take a look at your efi partition and remember the mb of this partition for later)
Then go into the uefi settings (bios) and disable secure boot as well as fast boot, otherwise it could cause data crash.
Boot your Arch Live CD and follow the beginners guide all the way along till you reach the disk management.
If you want to have swap, you can create yours right now, should be a primary partition of about 4gigs.
Next partition is gonna be your home, system partition (I've didn't created two partitions for home and for the system but you could do this as well as just go with one partition) this partition gonna be formatted in ext4
Next step, you have to mount your windows-efi partition in /boot/efi but don't format it dont remeber if it asks you how to use the partition but if so, just use as fat32.
After the disk management go ahead with your arch installation and follow the beginners guide. (Make sure you're using the grub bootloader)
After finishing the installation, restart your system, hopefully you will recognize the opening grub menu. (but dont scare, windows wont show in the grub menu at this time so you have to boot your arch)
Arrived in arch linux type the command
grub-mkconfig -o /boot/grub/grub.cfg
Reboot and your done with your Arch Linux, Windows 8 dual boot, hopefully

How to Install 11g Management Agent

Hi
I installed 11g EM Grid Control (11.1.0.1.0) on RHES 5U2 64bit server. Installation was successful. Now I wish to monitor my other database servers through this OEM. My servers are RHES 4U5 32bit so I downloaded 11g Agent Software for 32bit. runInstaller doesnt seem to work in GUI hence I had to modify the additional_agent.rsp file in the unzipped directory /../response and included details. When I run the installer with -silent option it fails after 5 minutes with Error: Connection timed out.
Since I cannot access internet therefore I have set these values in the .rsp file
SECURITY_UPDATES_VIA_MYORACLESUPPORT="false"
DECLINE_SECURITY_UPDATES="true"
Is there a workaround?
Thank you all
Edited by: user560883 on Jun 10, 2010 3:52 AM

Hi Rob
It worked while I was typing my response. Now I can see the target in OEM but when I try to set Target Credentials for the DB it fails.
OEM->Home->Preferences->Preferred Credentials->Database Instance->Set Credentials-> Target Credentials
I tried with two different user accounts but both are not accepted. I verified that the accounts are not locked.
Also if I go to Database Instance Page and click on Configure, it doesnt show the property where I can set username and password (dbsnmp). Instead it is showing following error on top
Error occurred while getting information for the specified target. Possible reasons include: the target doesn't exist; connection to the target failed
Any clues?

How to install intelligent agent

Can someone please tell me how to install the intelligent agent on the NT server 4.0 platform? I can't install the intelligent agent extension pack due to my intelligent agent hasn't been installed yet.
Please help!
null

Explain what kind of installation you did. Accoding to what I know in 10g there is not an intelligent agent service to administer it explicitly.
Joel Pérez

How to deploy the Workspace Agent Services as a Window Service!

Hi all,
does anyone know how to install the Workspace Agent Service back as a Windows Service after i re-installed an reconfigured the workspace completly i do not see the Agent anymore in my Windows Services. I sure would like to avoid to have to uninstall and set it up completely again.
The agent start file is located in common\workspacert\9.5.0.0\bin.
Your help is much appreciated
Cheers
André

I hit the same problem after reinstalling workspace.
It seems that the config tool does not create the workspace agent service on subsequent configurations.
A quick search of the configtool.log from the original installation/configuration yields the following:
com.hyperion.avalanche.config.CoreService, INFO, Running command: D:\Hyperion\common\workspacert\9.5.0.0\bin\wksagent.exe -RegService -Auto -Name HyS9Core1 -DisplayName Hyperion Workspace - Agent Service -Description HyS9Core1, Provides service infrastructure to run services locally
Dropping the above line at the command prompt fixed the issue for me.
Cheers,
Aaron
Edited by: user8871938 on 15-Feb-2010 06:56

How to install Oats linux agent

Similar Messages

Maybe you are looking for