How to install ODI Planning Adapter

Hi Friends,
One of my client is trying to install the ODI Planning Adapter. After unzip of the file we have two folders: Drivers and impexp. I recall that we are supposed to copy the contents of these folders somewhere but I cannot find documentation and what I should do.
Can anyone suggest on how to instal planning adapter.I searched for documentation in odiap_93110_readme.pdf I don't see instruction on how to install the ODI planning adapter.
If anyone can give me a step by step procedure to instal planning adapter it would be great help.
Regards.

Hi All,
I am new to oracle BI space . i need to load data from my flat file source to hyperion planning 9.3.0.1 application.
Here are the steps i followed:
downloaded and installed ODI 10.1.3.4.
i could find the adpater for hyperion planning 9.3.0.1 for ODI.
Can somebody please help me out and tell me where the above mentioned installation file is located in internet.please share the location...
Some how or the other i could able to find the odiap_93110.pdf file which lets me to know about installation instructions.
Thanks & Regards,
Lokesh

Similar Messages

  • Kindly provide me how to install odi in my pc windows 7 64bit

    Hi all,
    Plz kindly provide me how to install odi in my lap windows 7 64bit and do we have option to install odi in windows7?
    In windows 7 i already installed oracle 10g database and downloading ODI 11.1.1.5.0 version from oracle site.
    Its a urgent process to me and thanks in advance and guide me .

    Hi,
    for Windows x64 be aware of these pitfalls:
    - you need the "generic" Java version of ODI, not the Windows one (which target x86)
    - you need a 64 bit Java Virtual Machine to run the setup
    - you need a 32 bit Java Virtual Machine to run the application (ODI Studio) after installation complete
    I used JRockit (Java Virtual Machine), and with default settings the JRockit installer overwrite previous installations, even for different processor architecture (ie 32 bit installation overwrite 64 bit).
    So to me the following worked:
    - Install JRockit 64 bit
    - Run ODI installation
    - Install JRockit 32 bit
    - Run ODI Studio.
    Hope it helps,
    Corrado

  • How to install SOAP Axis adapter and where is it available  ??

    Hi,
    I heard that SOAP Axis adapter was not initially available for PI 7.0 and was introduced in some later support pack.When I checked the below url I found that some of the components are missing.
    http://xi-dev.intranet.com:50000/XIAxisAdapter/MessageServlet
    Can anyone please suggest how I can get that pack and where it will be available?
    How to install it?
    Thanks
    Deepthi.

    Hi Sunil,
    Dont mind...one final question, they mentioned in the README file as below.. 
    // Open the SDA archive using some unzip tool and replace the following empty
    jar files with the those inclued in Axis 1.4 src package
    axis.jar
    commons-discovery-0.2.jar
    commons-logging-1.0.4.jar
    commons-net-1.0.0-dev.jar
    wsdl4j-1.5.1.jar
    When i checked in the Axis folder, I found so many files.
    Do I need to just add this Axis zip file into aii_af_axisprovider.sda Archive file.?
    If possible, It would be very helpful if you send the aii_af_axisprovider.sda file which you have deployed into your system?
    Thanks
    Deepthi

  • How to install second Ethernet-adapter

    I've got Ultra 5 and there is the on-board Ethernet-adapter on it. But i want to insert another (PRO/100) PCI adapter.
    I did it, and ptrconf says:
    pci (driver not attached)
    ethernet (driver not attched)
    I tried sys-unconfig - but this utility always trying to configure my ON-BOARD card... So, how to install drivers?
    Thank you.

    I've got Ultra 5 and there is the on-board
    Ethernet-adapter on it. But i want to insert another
    (PRO/100) PCI adapter.
    I did it, and ptrconf says:
    pci (driver not attached)
    ethernet (driver not attched)
    I tried sys-unconfig - but this utility always trying
    to configure my ON-BOARD card... So, how to install
    drivers?
    Thank you.

  • ODI Planning Adapter installation

    I unzipped the planning adapter installation files in the oracledi folder. I was wondering, do I I copy the contents of the drivers and impexp for the planning adapter into the original drivers and impexp folder? Thanks for any assistance.
    regards

    Hi,
    Yes you copy the jar files into the oracledi\drivers directory
    All the xml files can go into the oracledi\impexp directory
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • HOW TO INSTALL ODI 11g / OWB 11g  IN WINDOWS SERVER 2008 R2 (64 BITS)

    Hi everybody,
    I have a serious problem.
    Last week we buy a new server with Windows Server 2008 Std. R2 x64, for a new project. I tried to install the RDBMS Oracle 11g R2 (x64) without problems, but when i try execute the "Design Center" contents in OWB, show me the error: 0xc0000018
    Then, I´m thinking in install Oracle Data Integrator to solution it, but i`ve read that neither can install on 64 bits system... This is true?
    Somebdoy knows how can I install OWB 11g / ODI 11g in a Windows 2008 Server 64 bits?
    Thanks & Regards!

    OWB 11G Will have been installed with the database, it now ships with 11G.
    Check you are on a supported platform for design centre using the certification matrix.
    Quick google search for you regards 0xc0000018 :
    Problem in Lunching OWB Design Center

  • How to install custom Resource Adapter

    Hi I have writen the java class for the Custome Resource adapter and I loaded the .class file into web-inf classes folder.I followed the installation steps given in the deployement document.In that I am not understanding one step i.e "Install .class file and help file into IDM" How can we do this and How to get the particular resource under Managed Resources tabe of Configure tab./its very urgent for me any kind of help is appriciable.

    Ok, since it is urgent, do it the way Sun/Waveset inserts the adapters.
    1.) Alter your java code to have
    package com.waveset.adapter;
    As your package line.
    2.) Compile the adapter to a class file.
    3.) Grab the idm.jar file from $WSHOME/WEB-INF/lib and copy it to e.g /tmp
    4.) unjar it. jar -vxf idm.jar
    5.) copy the your adapter class file to /tmp/com/waveset/adapter
    6.) jar the archive. jar -cvf idm.jar /tmp/com
    7.) Make a backup of the original idm.jar, and copy the new to the old position replacing the old jar-file. Bounce your app-server.
    8.) Log in as configurator or an administrator with equal capabilities. And add the custom adapter using the previous procedure... although, use the adaper class path
    com.waveset.adapter.YourCustomAdapter
    9.) Go to debug pages and put tracing on the same class file, and tail -f the app-server std out.
    10.) try to configure the adapter. Note any eventual error messages. Post error messages on the forum along with the std out log.
    If your adapter code works, it should work... if not your problems are elsewhere.
    Please not that this set up is not recommended for production environment and if you apply service packs etc this fix will break!

  • How to install Microsoft Loopback Adapter

    I want to install the Microsoft Lookback Adapter in Windows 7. I have done this under Vista either via:
    1) Control Panel, Classic View, Add Hardware
    2) Device Manager, right click on root node and select Add Legacy Hardware
    I can't find the equivalent under Windows 7 - any suggestions?
    Thanks!

    I have a video that covers the steps to install the Microsoft Loopback Adapter in Windows 7.  Hope this helps...
    http://www.youtube.com/watch?v=R9674zGHxrE
    Guides and tutorials, visit
    ITGeared.com.

  • How to install Trust bluetooth adapter 4.0 on my HP Pavillion p6-2304eb

    I have tried several times to install, but after installing, PC (windows 8.1) doesn't recognize my adapter???
    message: plug in the adapter
    The bluetooth adapter is a TRUST bluetooth adapter 4.0 with productnumber 18187.
    plugged in a USB 3.0.
    This question was solved.
    View Solution.

    Trust has not supplied a driver for Windows 8.1 so the issue is not with your PC or the operating system. Tyr plugging it into a usb 2.0 port. USB 3.0 ports are picky about devices.
    The problem  is that the bluetooth dongle has no support for Windows 8.1.  Contact Trust .  
    Sorry to bear bad news. I would return the dongle and find one that suports Windows 8.1.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • How to install ODI 11g console.

    Using which insatalleble file we can install odi11g console?

    see this
    http://odiexperts.com/11g-odiconsole-part-511
    software is available at http://www.oracle.com/technetwork/middleware/data-integrator/downloads/index.html
    while installing you need to go for "Java EE" Install Type
    Thanks,
    Sutirtha

  • Can anyone tell me how to install Hyperion Planning 9

    Hai
    I am Actually new to hyperion and i am eager to learn Hyperion Planning system 9 and Financial Reporting 9.3
    Do anyone have download links? to practice the all the reporting stuff
    Regards,
    Raju

    All the installation files are under https://edelivery.oracle.com/ For System 9, you can find the files under Hyperion Performance Management and BI.
    All the documents are under: http://download.oracle.com/docs/cd/E10530_01/welcome.html
    I am just curious why system 9? Oracle has recently released 11.1.2.1. Wouldn't you want to learn the latest version?
    Cheers,
    Mehmet

  • Installing Oracle Data Integratior Planning Adapter Assistance

    Does any know how to install the Planning Adapter for ODI? I cannot find any documentation that actually explains how to do the install. The only documentation I can find on the Hyperion site is a README file. The ODI installation and user guide do not adress specifically how to install an individual adapter. Maybe I'm missing something.

    Hi,
    What version of ODI have you installed, version 10.1.3.5 comes installed with all the planning required modules.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • How to install Oracle AS JMS Adapter on Websphere (or any J2EE server)

    Hi,
    We have a requirement in which the client wants to connect to the OC4J JMS running in SOA Suite (Oracle Application Server 10.1.3.4).
    They are using Websphere. We are exploring ways by which they can connect from Websphere application to Oracle AS OC4J JMS.
    One option is - deploy the Oracle AS JMS adapter in Websphere and then use it to connect to the OC4J JMS.
    Please let us know if this is the right approach. Also, if so, kindly point to the documentation regarding how to install the JMS adapter on 3rd party J2EE servers such as websphere.
    Rgds,
    Amit

    While searching the knowledge base I found the following note, which seems to suggest that Oracle Adapters are not deployble on other J2EE application servers:
    Support For Jca Adapter In Other Application Servers Like Jboss [ID 1114738.1]
    ==============================================
    From the statements in documentation it may be implied that jca adapter should be deployable on any application server that is compliant with j2ee/jca. Please note that this cannot be implied at this time and jca adapter cannot be deployed on other application servers than OAS in BRM 731 due to some technical constraints. So currently we can support only OAS and not JBoss or another application server , in BRM 731. The documentation will be updated accordingly to reflect this.

  • How to use ODI and Planning Adapter.

    How to load the dimensions in planning using ODI and Planning Adapter. I am just looking for a functionality that we used to have with HAL and Planning.

    Hi,
    Have a read of my blog it should give you all the information you need.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • HT1349 mini graphics to vga adapter for macbook how to install in windows 7.

    mini graphics to vga adapter for macbook how to install in windows 7.
    i have macbook with windows 7 operating system.

    Can you be more specific?
    What are you trying to do?

Maybe you are looking for