How to Install OEL5.3 Source DVD from eDelivery

I'm totally new to installing OEL (not using an OBI)
I need to have source code available to install the CISCO VPN (at least that's how I'm interpreting the instructions).
I have downloaded the iso for the source and burned it to a DVD.
When I look at the DVD I see SRPMS folder, EULA, GPL, RP-GPG-KEY and TRANS.TBL
Nothing gives me a clue how to install the souce...
Is it as simple as just copying the rpms to usr\src?
thanks

You just need the "kernel-devel" RPM package from the binary distribution; ignore the source media and ".src.rpm" packages.
# /bin/rpm -Uvh kernel-devel*.rpmYou will need to find the "kernel-devel" RPM on the installation media; use that.

Similar Messages

How can i get the source code from java concurrent program in R12

Hi 2 all,
How can i get the source code from java concurrent program in R12? like , "AP Turnover Report" is java concurrent program, i need to get its source code to know its logic. how can i get its source code not the XML template?
Regards,
Zulqarnain

user570667 wrote:
Hi 2 all,
How can i get the source code from java concurrent program in R12? like , "AP Turnover Report" is java concurrent program, i need to get its source code to know its logic. how can i get its source code not the XML template?
Regards,
ZulqarnainDid you see old threads for similar topic/discussion? -- https://forums.oracle.com/forums/search.jspa?threadID=&q=Java+AND+Concurrent+AND+Source+AND+Code&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

How can I remove the " Source.vi" from long Express VI Names?

I am in the Moment working on the Development of an Express VI
library for test purposes.
How can I remove the " Source.vi" from long Express VI Names?
This happens when the Express VI is inserted in the blockdiagram
and listed in LabVIEW and TestStand Palettes.
By short names like "DAQ-Assistent" or "EasyCalc" the string " Source.vi"
is not shown at the end of the Express VI names.
I used The Express VI Dev Toolkit 1.0 to create the Express VIs.
Labview Version: 7.1 Base
TestStand: 3.1
It would be great to get the expert advice from the Forum for this issue!
Thanks a lot.
Andre

I think I understand what you are asking for. If I am wrong, please try to explain it a bit more.
The name shown may be different than the name of the vi file. To do this, your source VI and popup on its icon. From the short menu that comes up, select VI properties. In the top ring, select Window Appearance. The page that comes up lets you set various things that can affect the appearance of the VI. What you want to change is the window title. Uncheck the Same as VI name checkbox and change the string to whatever you want it to be.
I hope that this helps,
Bob
Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
DISTek Integration, Inc. - NI Alliance Member
mailto:[email protected]

How to design EDW for source systems from different Time-Zones

How to design EDW for source systems from different Time-Zones?
Suppose IT landscape has a global BW in New York, and source systems in americas, europe and asia, then how the time-zones effect on time related things like delta selections on date or timestamp etc.

As you said BW is global in NY, your source system must be global too. People from various locations can connect to same source system and thus timestamps for delta is always maintained as 1 single time. We have same scenario in our project. Our R/3 system is used by users in US and Europe. So we run deltas twice in day to make sure we got deltas from both locations.
If scenarios was such that all locations connect to separate R/3 system, then obviously you have multiple queues. That is unique delta queue for each source system so deltas will be pulled as per data in respective queues.
Abhijit

How to install third party plug-ins from photoshop elements 11 to new 13 in my PC win7?

how to install third party plug-ins from photoshop elements 11 to new 13 in my PC win7?
Thank you.

Hi ,
Your windows is 32 bit or 64 bit .
If win 7 32 bit
Just copy the plugin from PSE 11 and paste it to PSE 13 plug-in folder.
If win 7 64
PSE 11 and PSE 13 are installed as a 32 and 64 bit respectively , so you need to install plug-in again.
Thanks,

I don't know how to install Mp3 and PDF file from my computer to IPhone?

I don't know how to install Mp3 and PDF file from my computer to IPhone? Please who can help me. Thanks

Please Get the iPhone User Manual for iOS 5.
Put such files into iTunes, sync to phone. Everything syncs from iTunes to phone.

How to install windows 7 in bootcamp from flash drive os x 10.9.1

How to install windows 7 in bootcamp from flash drive os x 10.9.1

oooHideooo wrote:
It DOESN'T WORK!!
I tried tonnes of method already, and the apple guide method absolutely doesn't work for MacBook Air, 10.9.1
Did you even tried it yourself????!! with Maverick 10.9.1 you will NOT be able to get pass the bootcamp first page:"install window 7". It will give an error msg saying "The installer disc could not be found"
My usb confirmed bootable! I created it with bootcamp, and tested it on a different macbook and it works. But doesn't work on MacBook Air. (Even startup disk doesn't detect it as bootable in Air)
anyone else has a real solution to this problem?
Thousands have successfully tried it themselves and installed Windows on a Macbook Air. Perhaps if you provided some details about what you did and what errors you observed we could help you. The Boot Camp instaructions, if followed, will produce a successful install.

How to install icloud if not directly from their iPhone

how to install icloud if not directly from their iPhone

iCloud Set Up
Apple - iCloud - Learn how to set up iCloud on all your devices.
To enable iCloud on your Windows PC, first set up iCloud on your other devices, then install the iCloud Control Panel for Windows...
From Here...
http://www.apple.com/icloud/setup/pc.html
iCloud FAQs
Creating an iCloud account: Frequently Asked Questions
Supported System Requirements

How to install os x through dvd disk

i formatted my macbook pro and im trying to install os x 10.6.1 using mac dvd but im inveining ,
pls help me out of this suitation and tell me how to install os on my laptop

Welcome To  Discussions alansky1!
Did you use the procedure posted below to create the Disk Image of the Leopard 10.5.x install disc?
Insert the DVD that you wish to copy.
Open Disk Utility, from the Utilities folder.
From the list on the left side of the window select the original DVD that you wish to copy.
From the DU contextual File menu select New: Disk Image from Disk....
Name the disk image and choose Image Format: DVD/CD Master.
Save to the Desktop.
When the Disk Image is finished, you can eject the original DVD.
Back in Disk Utility, from the list on the left side of the window select the new Disk Image. This may be a .cdr or a .dmg.
From the Images contextual menu, select Burn.
Insert a new blank DVD and click Burn.
ali b

How do I run system recovery dvd from an external dvd drive?

I am having trouble trying to restore my DV 6000 (dv6915nr) from an external dvd drive. I am aware that this laptop has had several hardware issues, including the loss of use of the internal dvd drive and have tried all the fixes that I could find,including changing filter settings in the registry, changinging the boot order in the bios and even removing the intenal drive. Since none of these fixes worked, I removed the hard drive and installed window 7 Prodessional in a desktop computer. After reinstalling drive in laptop, I installed all the Vista drivers from HP. Computer works fine except for sound card and Nic that failed and have been replaced by USB devices. Simce I am not 100% sure the hardware failures are motherboard failures and not software, I would really like to run my System Restore DVDs that I purchased from HP. And that's where I need help.
I am A Plus and Network Plus certified, so I am pretty sure that I have tried all the obvious soutions. Evedrything turned on, checked the cables, accessed dvd in wimdows and even ran restore disk in a desktop machine to the point that it told me I was trying to restore the wong computer. I downloaded a program called Win To Flash that allows you to copy a setup disk to an external hard drive, but that didn't work. HP restore disk does not have Setup file on it, so it wouldn't copy to drive. Tried just copying the disk to external and that didn't work either. Also tried switching drive letters D and E without any success.
Bios choices are:
USb floppy
ATAPI cd/dvd rom drive
USB diskette on key
Notebook Hard drive
Network Adapter
Original restore partition is long gone.
I would rather restore it with an external Hard drive, not an USB memory stick. I think both would work the same. I do have an USB floppy drive, if there is some way of starting installation from floppies.
Like I said, I really like the computer, even with all its faults, but I would like to restore it to its original Operating System.

Some progress, I got it to try to boot from an external hard drive. Downloaded a program called WINToboot. tried to run it, got as far as formatting my hard drive and might have loaded some kind of boot program. Would not copy my restore disks because they did not have set up program. Copied both restore disks to hard drive and tried to boot laptop. F0 produced choose external hard drive choice. Got "no OS found" error. only choice ctl alt del. I think I am headed in right direction. Just need to know what to load on external hard drive.

How to install OS X Snow Leopard from OS X 10.4.11

So I have a Mac OS X 10.4.11, and I am trying to install Snow Leopard on it. My computer meets all the system requirements, but the disk always pops out for no reason. I have tried cleaning the disk drive, and everything else possible. Someone please tell me how to install from there.

Download from Mac App store and follow instructions.
Stedman

How to install oracle 10 g downloaded from oracle site ?

I have downloaded oracle 10 g from the oracle website but I dont know how to install it . I need this for practising TIBCO . Please help me . Thanks in advance .

Hi;
I have downloaded oracle 10 g from the oracle website but I dont know how to install it . I need this for practising TIBCO . Please help me . Thanks in advance .You want to make installation to which platform?
If you want to make it on windows:
Please follow this
If you want to make it on linux:
Please follow this
You will find many document above link
Ps1: if you will go linux instalaltion please visit http://www.oracle-base.com/articles/10g/OracleDB10gR2InstallationOnRedHatAS4.php
Ps2: if you will go windows instalaltion please visit http://faq.programmerworld.net/database/installing-oracle-10g.html
Regard
Helios

How to install Essbase on your laptop from the Oracle Download site

Hello everyone,
I am attempting to install the download version of Essbase on my laptop from the Oracle site. I have downloaded the following Essbase-11113 part 1, Essbase-11113 part 2, and APS-11113 part 3. However I am at a loss as to what to do next. I didn't see any executible files in the downloads all I see are xml documents and .dat files so I am completely lost as to how to install the system and get a working copy of Essbase running. Any assistance will be greatly appreciated.
thanks,
EC

I too have it installed on a VM -- Windows 2003 -- and it's a 32 bit OS. If you do want to move it to your real desktop, you'll need a bunch of directories and environment variables from your successful 32 bit install to make it work, even for the client. I think XP should be okay for just Essbase and maybe EAS. You can always install Excel on the VM as well and just keep it entirely self-contained.
SmartView on 64 bit, if you're using Excel 2007, is a non starter; it does work with Excel 2003 and I think it's slated for a fix in 11.1.2.
If you're as hopeless as I am when it comes to installations, make sure you take plenty of snapshots so you can roll back to the last working instance. I did the whole stack on my VM, so I had lots of things to get wrong.
I think those who know what they're doing when it comes to installs don't see it as a challenge -- I'm a developer, not an installer, so I found it it be be gruesome (the full stack, 64 bit Essbase on the real iron).
Good luck.
Regards,
Cameron Lackpour
P.S. Just to show that when it's all certified, it works, I was able to install AppliedOLAP's client (okay, Tim was watching over my shoulder, but still) on my Vista 64 bit without any trouble whatsoever. It worked like a charm.
Edited by: CL on Mar 5, 2010 11:58 AM

How to install drivers for windows 7 from bootcamp

how to install bluetooth driver for windows 7 (bootcamp)?

make the usb stick or cd disc from osx bootcamp with all the apple drivers
start windows
navigate the usbstick or disc and install the bluetooth drivers

How to install adobe photoshop cs3 dvd

How do I install Adobe Photoshop CS3 DVD to my computer windows 7 I put the DVD in and nothing comes up to install it

Hi mvigus,
If the installer doesn't start automatically (you don't see the autoplay screen), navigate to the contents of your disc in Windows Explorer. Double-click the setup.exe file. Ensure that you are logged in as the administrator of your computer. Also, after the installation is complete, run the software with administrator permissions.
Let me know if this helped.
Thanks,
Preran

How to Install OEL5.3 Source DVD from eDelivery

Similar Messages

Maybe you are looking for