How to install ojvm in 9.0.3.x for jdk 1.4.x

I'm trying to use the profiler in Jdev 9.0.3.x. Using jdk 1.4.1_03 the memory profiler option is disabled.
Reading from other postings i understand that i need to have my VM set to ovjm. But i cant see that option with this jdk version.
any suggestions to get this working for jdk-1.4.1??
Thanks
Vishal

The JDeveloper 10g developers preview release includes JDK 1.4.1_02 with OJVM already bundled in with it.
The version of OJVM that was shipped with 9.0.3 doesn't support JDK 1.4.1.
In short, you'd need to use the 10g preview for this.
Rob

Similar Messages

I just purchased Wittenberger Fraktur how do install this font into my photoshop cs6 for mac ?

I just purchased Wittenberger Fraktur how do install this font into my photoshop cs6 for mac ?

You just install it in the OS.
Photoshop gets the fonts from the OS.

How to install old ios? v.3.0 for ex.

how to install old ios? v.3.0 for ex. for iphone 3g?

There is no legit way to downgrade at all.

How to install ojvm??

I installed Oracle 9i JDeveloper Version 9.0.3 and when I ran it, a message appeared saying that ojvm client is not installed and that JDeveloper will be slower. I already followed the instructions on the manual. I ran InstallOJVM.bat c:\jdk and I also configured jdev.conf (SetJavaHome c:\jdk, SetJavaVM ojvm), but JDeveloper is still asking for it. I can use JDeveloper, but it's slows the system down. Please help.

Hi There;
Just set setJavaVM to hotspot insteat of ojvmit will work.
I had the same error, know it's gone
good luck
Zine

How to install the add-on Photo Upload Dropbox for CC products, like Lightroom?

I have bought the add-on from Adobe to use it in Lightroom. My CC app says it is installed, but I can't find it in any of my CC apps (Lightroom, PhotoShop etc).

When you purchase an Add-on, the web page for the add-on has a tab that tells you where to find it and how to install it.
Go back to the page where you ordered it and look for the Where to Find It tab, shown below:
For further questions, it would be best to ask in the Lightroom forum.

How to install itunes and docusign in ios simulator for monodevelop

Hi All,
Can anyone tell me on how to install iTunes and other applications like Docusign in ios simulator that is run on Mac(monodevelop).
Thanks

Hi there rj 138,
You may find the troubleshooting steps in the article below helpful.
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/ts3299
-Griff W.

How to Install Patch 3944888: EBS-OFO integration patch for PLM Family

Dear Oracle,
I just Download Patch 3944888: EBS-OFO integration patch for PLM Family Pack 11.5.10 E. Unfortunately after unzip the file and read the readme file, i can't found the installation guide or instruction to install the patch. Does anybody know how to install this patch on EBS?
Best Regards
Gumas

Gumas wrote:
Dear Oracle,
I just Download Patch 3944888: EBS-OFO integration patch for PLM Family Pack 11.5.10 E. Unfortunately after unzip the file and read the readme file, i can't found the installation guide or instruction to install the patch. Does anybody know how to install this patch on EBS?
Best Regards
GumasYou need to apply the patch driver u3944888.drv using adpatch like any other patch.
Just make sure you apply all the patches under "Prerequisite Updates" before applying the patch.
You may also refer to these docs which are related to the patch you are applying.
Integrating Oracle E-Business Suite (11i, R12, and R12.1) with Content Management Repositories [ID 1061947.1]
Internal Controls Manager Patchset history [ID 400191.1]
Update Process, Risk Or Control Results In JBO-25002 ApplicationModule Not Found [ID 553539.1]
Cannot Add Or Display 10G Repository Attachments [ID 367965.1]
Thanks,
Hussein

How to install eclipse and MyEclipse and use it for jsp-servlet-web service

hi ,
please help me to install eclipse 3.1 and How to integrate MyEclipse to do jsp-servlet programming and web services.
please also help me to include application server like tomcat and axis and use that environment in MyEclipse ide.
please help me.....

At the time of installation , you can't change SID XE.
After installation, you can add another service name
Check following thread for more details
Re: How to create service on Oracle 10g XE
- Virag Sharma
http://virag.sharma.googlepages.com
http://viragsharma.blogspot.com

How to install and where to get kernal source for Oracle VM Server

Hi guys
Can someone point me in the right direction for oracle VM Server kernal source, as the server I am using won't ping, and found its cause it doesnt recognise the network adapter, says there is no drivers.
But the HP website states I have to have the kernal source install so that I can build the driver.
Any suggestions or help on the matter?
Thanks

Thanks
I got my server to ping.
Now I have ran into more trouble.
I have been following ORacles installation guide for installing a Virtual Machine, but am struggling to install it, as their instructions don't match whats on the screen.
They tell you to copy each CD into a directory.....
and then mount that directory as an NFS mount.
I done all that
and then it tells u to do virt-install
So I do that, and it all works great, until the end part, its mean to ask you what is your installation souce directory , and your supposed to put nfs:selfhostname_ip_address:/path/to/files
and away you go.
However my server says " what would you like to use as your virtual CD image"
and so I type nfs:server_ip_address:/path/to/files etc, and I get the error CD MUST EXIST
so to get around this, I just typed /OVS/iso_pool/Disc1.img
and away we go, instlalation starts....
However THe instlalation then asks for disc 2, and then I get stuck, how do I tell it, that I changed the disc, and its ready?
I tried an installation of mounting the disc1 iso from a cd to /mnt
and then wen it wanted disc 2 I dont umount -l /mnt ...it said inodes busy, so I just forced the eject CD physically ont he drive
and then mount /dev/cdrom /mnt , for disc3
but it didn't detect I changed a cd.
Can anyone help me, its really urgent have to get this server up and running by today if possible.

How to install directory server/client on Solaris 9 for dummys

Hi,
after reading hunderts of pages, after asking questions in forums without getting the right answers, i was able to install the directory server in our company.
Here is the summary i made for myself. Perhaps it helps others to avoid the same problems.
Set up a Directory Server (sun one ds 5.1)
Present situation:
-Nisplus is installed
-Solaris OS 9 sparc 64bit is installed
-DS5 Software is normally already installed in Solaris 9. Check off with 'pkginfo | grep IPLT*'
-Otherwise install from Solaris OS 9 Disc1 with 'pkgadd -d IPLTxxxx .'
-Software setup with '/usr/sbin/directoryserver setup'
     Install admin- and directory server.
     For Directory Server use port 389 (necessary for later use of SSL)
     For Admin Server use any empty port > 1024
     Run directoryserver as root (necessary for using port 389 and for -starting servers from console)
     Use default Directory Manager DN cn=Directory manager
     Use your domain as DIT (default information tree) example: dc=example, dc=com
     As second DIT, setup installs o=NetscapeRoot. Don't change this DIT at all!!!!!
The server stores all the default schemas there which are absolutely important for the directoy
server. Don't change anything there !
-Configure software with 'idsconfig'
     Preferred - and default server xxx.xxx.xxx.xxx (ip_adds of your directory server)
     Use default search scope one
     Use credential's Proxy
     Use authentication Simple (you may change this later if needed)
     All the rest should remain on default settings
     You will be asked for a proxy passwort
-Start the directoryserver console with '/usr/sbin/directoryserver startconsole'
-If it's not yet running, start the directory server from console or with command 'directoryserver -s instance_name start'
-If it's not yet running, start the admin server from console or with command 'directoyserver start-admin'
-On directoryserver's gui at configuraton/password set password encryption to 'unix crypt algorithm (CRYPT)'
Import Data
-Get Data from Nisplus with
     'niscat passwd.org_dir passwd.ldap'
     'niscat hosts.org_dir hosts.ldap'
     'niscat groups.org_dir groups.ldap'
     etc
-adjust the files. (try it out with one entry of a file only. You may delete this entry with the gui very easy if it's not successfull.
-hosts.ldap must look like
xxx.xxx.xxx.xxx machine1
xxx.xxx.xxx.xxx machine2
xxx.xxx.xxx.xxx machine3
     First value is the ip-address, second one is the hostname.
     If you have more than one hostname per machine, use a second line (don't write 2 names behind the ip-address like you did in nisplus!!!)
Change content of files into ldif format
-perl migrate_hosts.pl hosts.ldap hosts.ldif
-perl migrate passwd.pl passwd.ldap passwd.ldif
-You may download the above perl-Files from http://www.padl.com
Change the converted passwd.ldif File as follows:
-before change:
dn: uid=mario,ou=People,dc=krinfo,dc=ch
uid: mario
cn: mario
objectClass: account
objectClass: posixAccount
objectClass: top
userPassword: {crypt}6O9m3uK./T/rM
loginShell: /bin/bash
uidNumber: 1020
gidNumber: 14
homeDirectory: /home/mario
-after change:
dn: uid=mario,ou=People,dc=krinfo,dc=ch
uid: mario
cn: mario
objectClass: account
objectClass: posixAccount
objectClass: shadowAccount <--- this line must be inserted
objectClass: top
userPassword: {crypt}6O9m3uK./T/rM
loginShell: /bin/bash
uidNumber: 1020
gidNumber: 14
homeDirectory: /home/mario
Insert the line for every entry in the passwd.ldif file
You may now import all these xxxx.ldif files into the directory server with
-ldapadd -h name_of_directoryserver -D "cn=Directory Manager" -w password -f XXXXX.ldif
You may use this commands later to import further data.
-Initialise a client
'ldapclient -a proxyDN=cn=proxyagent,ou=profile,dc=example,dc=com init xxx.xxx.xxx.xxx'
The xxx.xxx.xxx.xxx at the end is the ip address of the directory server
-This will make a client with data taken from the default profile from the directory server. This profile has been produced with the earlier command idsconfig and can be changed if needed.
-The System will ask you for the proxy password (given the first time in idsconfig dialog)
-You may now look at the produces files
in '/var/ldap/ldap_client_file' for the client settings
in '/var/ldap/ldap_client_cred' for the proxy settings
'ldapclient list' shows the settings of the client
With 'ldaplist -h' you may see all the existing entries with their objects.
Activate the client
-If it's not yet running, start '/usr/lib/ldap/ldap_cachemgr'
-All nisplus daemons/programs have been stopped by ldapclient command. If not, stop them manually.
-/etc/nsswitch.conf should have been copied from /etc/nsswitch.ldap from ldapclient too.
-If not, do it manually.
example
passwd: files ldap
group: files ldap
hosts ldap dns files
etc
I recommend to change the file '/etc/nsswitch.ldap' because the system oftens copies nsswitch.ldap to nsswitch.conf and if nsswitch.ldap is adapted, you must now change it again and again.
you may now check whether ldap is working fine with the following requests:
getent passwd username
getent hosts hostname
getent groups
getent network
These commands should give you the requested answer.
Be sure to clean:
/etc/hosts      inside is only your workstation and the directory server
/etc/passwd     only default and local entries
/etc/groups only default and local entries
etc
try a telnet to your own machine to check, whether password and automount of your home_dirctory works fine.
I failed here. All was working fine, but the password exchange did not because of credential/authentication problems.
Best regards and good luck
Mario

Directory Server 5.1 does not support Kerberos authentication.
Beside this there are some extensions in MS kerberos authentication that makes it almost impossible to have a MS client authenticate with something else than AD.
Regards,
Ludovic.

How to install Oracle 10g Release 2 (10.2) for RHEL 5

Hello Guys,
I want to install Oracle® Database 10g Release 2 (10.2) for Linux x86-64 in RHEL 5
Please experience people guide me ... please don't give me http://download.oracle.com/docs/cd/B19306_01/install.102/b15667/toc.htm (Oracle® Database Installation Guide 10g Release 2 (10.2) for Linux x86-64) link i already gone through but it's to much in depth and not able to understand what is that i can use from this.
My Machine is having 12GB RAM and it's 64bit machine.
So please provide me steps that only relate to my oracle installation. I just want to do simple installation without database and my machine not have graphical interface also.
Send me your generic steps that i can run on my machine. if you want information about my system specification please ask.
So please people help me out... i am really thankful to you guys .....
Thanks ,
ORACLE DBA P

That also good idea man. thanks for your valuable advice.
I have confusion here ...
3. Changes to be made to Kernel parameters
After installing above mentioned packages, we need to change some Kernel parameters and make them match to Oracle requirements. Parameters which should be changed are shown below
shmmax     2147483648
shmmni     4096
shmall     2097152
shmmin     1
semmsl     250
semmns     32000
semopm     100
semmni     128
file-max     65536
ip_local_port_range     1024 65000
rmem_default     1048576
rmem_max     1048576
wmem_default     262144
wmem_max     262144
We do all these changes in the /etc/sysctl.conf file by adding these lines to that file:
kernel.shmmax = 2147483648
kernel.shmall = 2097152
kernel.shmmni=4096
kernel.sem=250 32000 100 128
fs.file-max=65536
net.ipv4.ip_local_port_range=1024 65000
net.core.rmem_default=1048576
net.core.rmem_max=1048576
net.core.wmem_default=262144
net.core.wmem_max=262144
Question: What will be my value for this as my system is 64bit so this all parameter is ok if i put all straight ?
----> Setting Shell limits for the Oracle UserTo improve the performance of the software on Linux systems, you must increase the following shell limits for the oracle user:
1. Add the following lines to /etc/security/limits.conf file
oracle soft nproc 2047
oracle hard nproc 16384
oracle soft nofile 1024
oracle hard nofile 65536
2. Add the following lines to /etc/pam.d/login file
session required /lib/security/pam_limits.so
session required pam_limits.so
3. In order to use Oracle Software, we need to make a change in “oracle” user’s buffer size and number of opened file descriptors. In order to do it, we add below lines to /etc/profile file
if [ $USER = "oracle" ]; then
if [ $SHELL = "/bin/ksh" ]; then
ulimit -p 16384
ulimit -n 65536
else
ulimit -u 16384 -n 65536
fi
fi
Question: this things also i need to change ?

How to install HTTP Server in a Linux Machine for running APEX

I've Installed Unbreakable Linux 4.7 and I'm using the standard apache which comes (Apache 2), I want to install the HTTP Server in order to run APEX on this machine, and may it look the data from the database which is oracle 10g (The database is on another machine). Could both installations of apache and Oracle http server co-exists and what is the best form to do it??

Yes, they can. They installed in different directories and you have to use different ports.
AFAIK for HTTP for APEX is either part of the installation (eg. in the Oracle Express Edition) or part of the Oracle Installation CDs. For more information see the Oracle Installation Documentation.
--olaf

How to install a root certificate of private CA for SSL initiation in ACE 4710 ?

Hello ACE Gurus,
We have to deploy end-to-end SSL for one of our application, but of course we won't be buying Entrust or other big name certificates for each web server : we want to use self-issued certs signed by our private CA.The topology looks like this :
Internet Client ----HTTPs_Entrust_Cert----> ACE ------HTTPs_Private_Cert------> WebServers
Maybe my search skills are soft, but I haven't found how to import a private CA certificate in the ACE, so that when the ACE initiates an SSL session with the webserver (as a client), it will recognize the Web Server's SSL Cert as valid, because he already has it in it's root store.
The only thing I've found, is how to configure the ACE to ignore the SSL authentification/validation errors, like this :
host1/Admin(config)# parameter-map type ssl SSL_PARAMMAP_SSL
host1/Admin(config-parammap-ssl)# authentication-failure ignore
Thanks for the help!
Alex.

Hi Alex,
From ACE perspective, it doesn't make differences if you are using certificates issued by your local or a "well known" CA. Moreover, if not mistaken, you have to configure authentication group whatever you are doing client or server authentication.
http://www.cisco.com/en/US/partner/docs/app_ntwk_services/data_center_app_services/ace_appliances/vA4_1_0/configuration/ssl/guide/certkeys.html#wp1043643
Thanks,
Olivier

How to Install UTL_SMTP Package in Oracle 8.1.5

Hi
We are trying to use UTL_SMTO package to send mail.
Will this package runs in Oracle 8.1.5? Any restriction on using this package?
How to install this package? Where the SQL for this package is residing.
If anyone can answer for this, we will be thankfull to you.
regards
Santhosh

Hi,
Run d:/oracle/ora81/rdbms/admin/utlsmtp.sql as SYS user. It create the package UTL_SMTP.
Hope this helps.
rukmini

How to install BPEL process manager

Hi All,
i am new to the BPEL ,i have installed BPEL ,but i have doubt that is it correct or not ,
Please let me know how to install BPEL and SOA suite is needed for BPEL installation
give me links to download BPEL software with steps.
Thanks
Maheswara Raju

Hi Guys,
Help the newbie in BPEL please
Thanks
Maheswara Raju

How to install ojvm in 9.0.3.x for jdk 1.4.x

Similar Messages

Maybe you are looking for