How to install on windows 7 x64

i keep getting an error when i try and install itunes after i rebooted my windows 7 pc and it downloads itunes but wont install it even as administrator,can any one tell me how i do install itunes as i had it on my pc before reboot???

What does the error message say? (Precise text, please.)

Similar Messages

  • Please help me with the step by step instructions on how to install a Windows server 2008 on a computer that has Windows 8 installed on it

    Please help me with the step by step instructions on how to install a Windows server 2008 on a computer that has Windows 8 installed on it without formatting windows 8.Please email the steps , Thanks

    Please help me with the step by step instructions on how to install a Windows server 2008 on a computer that has Windows 8 installed on it without formatting windows 8.Please email the steps , Thanks
    Assuming your rig can support virtual machines, you can use Hyper-V and run another OS there.
    Better practice however is to use a dedicated machine and use remote desktop to the server.
    Corsair Carbide 300R with window
    Corsair TX850V2 70A@12V
    Asus M5A99FX PRO R2.0 CFX/SLI
    AMD Phenom II 965 C3 Black Edition @ 4.0 GHz
    G.SKILL RipjawsX DDR3-2133 8 GB
    EVGA GTX 6600 Ti FTW Signature 2(Gk104 Kepler)
    Asus PA238QR IPS LED HDMI DP 1080p
    ST2000DM001 & Windows 8.1 Enterprise x64
    Microsoft Wireless Desktop 2000
    Wacom Bamboo CHT470M
    Place your rig specifics into your signature like I have, makes it 100x easier to understand!
    Hardcore Games Legendary is the Only Way to Play!

  • HT1349 mini graphics to vga adapter for macbook how to install in windows 7.

    mini graphics to vga adapter for macbook how to install in windows 7.
    i have macbook with windows 7 operating system.

    Can you be more specific?
    What are you trying to do?

  • CHKDSK fails on fresh install of Windows 7 x64 on mid-2009 MBP with SSD

    There was an earlier post about this that has been archived prematurely that I will reproduce below. The main issue is a flaw in the Windows 7 x64 CHKDSK of the SSD drive in the mid-2009 MBP= 5,2. With fresh OSX installs, bootcamp 3.1, Windows 7 x64 all updates, the CHKDSK operation checks files at about 1 per second in stage 4 of 5, verifying file data.
    Moderators: please leave this open until it is actually resolved.
    Earlier posts:
    Panajev
    Posts: 4
    From: ITALY
    Registered: Oct 14, 2009
    Windows 7 x64, MacBook Pro, frequent CHKDSK after HDD firmware update
    Posted: Nov 2, 2009 6:45 AM
    Hello, I have been having filesystem problems on my Windows 7 partition since the HDD related firmware update (the latest Performance update) was released and installed onto this mid 2009 MacBook Pro.
    The HDD is a 500 GB 7200 RPM model, but it never gave me any troubles under OS X before the "fix" and I know other users had intermittent problems with the HDD on their MacBook Pro's related to the HDD making noises and pausing.
    The fix was released, I installed it and I started seeing my first problem in Windows 7 x64 a few days after... I cleanly shut the OS down, but when I booted it back it asked me to perform a coherency check to the Filesystem... I thought that the problem was related to the fact that I was using the RC1 build of Windows 7... although that problem never manifested itself in the weeks before the Performance Update (HDD firmware fix) was installed and Windows 7 x64 RC1 had been on there and used frequently.
    I recently purchased Windows 7 retail a few days ago and after a bit of trouble-free operation I started having problems again... always shutting the PC down carefully and I was asked to run the CHKDSK utility at boot twice already.
    What to do?
    Message was edited by: Panajev
    MacBook Pro (2009) Mac OS X (10.6.1) Windows 7 x64, Bootcamp 3.0, recent HDD update
    nicegom
    Posts: 6
    Registered: Nov 12, 2009
    Re: Windows 7 x64, MacBook Pro, frequent CHKDSK after HDD firmware update
    Posted: Nov 12, 2009 1:40 AM in response to: Panajev
    Hi there,
    I have a different experience. I installed Windows 7 before the "performance update 1.0" came out. I actually experienced the chkdsk launch problem with Windows 7. I had done repartitioning and clean-install several times but cannot solve the problem. So I tried to install XP and Vista on my MBA (Mid 2009 with SSD) and found that these two OS doesn't introduce such problem.
    To be honest, I'm not sure which caused such problem, Windows 7, a bootcamp driver, or EFI. But I'm sure that CHKDSK in Windows 7 has an obvious bug that needs to be patched (memory leak and maybe this problem as well). So now I'm using Windows Vista SP2. And I'm happy with Vista SP2 (seems to become faster and stable now).
    Cheer,
    Message was edited by: nicegom
    Macbook Air Windows Vista MBA of Mid 2009 with SSD

    Windows 7 x64 all updates
    Just doublechecking. Does that include the recent chkdsk hotfixes?
    [The Chkdsk.exe program does not start correctly on a Windows 7-based computer|http://support.microsoft.com/kb/975778]

  • ICloud Control Panel 2.1 will not install on Windows 7 x64

    iCloud Control Panel 2.1 will not install on Windows 7 x64. If I try the to run the install from the Apple Software Updater it the iCloud 2.1 crashes and I get a message that suggests I do a download only  and they run it locally. I do that and the install i.e. the exe file just seems to never start even if I try to "Run as Admin"
    I go int o task manager and there is no instance of the install running.
    What is the issue/work around to this?
    Thx to all for help.
    Michael

    I didn't try creating a new user profile. Not sure I completely understand what you're suggesting. I dont't want a new/different profile. I just want to be able to install the update.

  • How can I get Windows (v7 x64) to open in Dreamweaver (CS5) if I right click it?

    Hi
    How can I get Windows (v7 x64) to open in Dreamweaver (CS5) if I right click it?
    None of the normal mechanisms of setting an application to be the DEFAULT application for the .HTML file type seem to work...
    Extremely irritating.
    J

    Jon Fritz II wrote:
    So when you right-click an .html file and choose Open With, what are you seeing?
    Is the check box for "Always use the selected program to open this kind of file" checked?
    A list of various "recommended applications" but not including Dreamweaver. It's not in the list of Other Applications either. And if I browse for it, my selection of dreamweaver.exe is flatly ignored without message.
    >Is the check box for "Always use the selected program to open this kind of file" checked?
    Jon Fritz II wrote:
    So when you right-click an .html file and choose Open With, what are you seeing?
    Is the check box for "Always use the selected program to open this kind of file" checked?
    A list of various "recommended applications" but not including Dreamweaver. It's not in the list of Other Applications either. And if I browse for it, my selection of dreamweaver.exe is flatly ignored without message.
    > Is the check box for "Always use the selected program to open this kind of file" checked?
    Yes.
    J

  • HT3986 how to install any windows on macbook pro (early 2011) (os x mavericks)?

    En: how to install any windows on macbook pro (early 2011) (os x mavericks)?
    Ro: *** se instaleaza orice windows pe macbook pro (early 2011) (os x mavericks)?
              Help Me Please

    search
    how to install windows on a macbook pro
    http://support.apple.com/kb/ht3986
    http://www.youtube.com/watch?v=uVfRQ0YIDUI
    http://www.gadgetreview.com/2013/05/how-to-install-windows-8-on-your-macbook-pro .html
    http://www.redmondpie.com/how-to-install-windows-7-on-macbook-pro-with-retina-di splay-tutorial/

  • Where to download and how to install X Window System for Oracle Linux 5 ?

    Folks,
    Hello. I am using Oracle Linux 5 and Oracle Database 11g for PIA.
    Before install Oracle DB 11g into Oracle Linux 5, we need to install X Window System according to the document page 2 http://download.oracle.com/docs/cd/B28359_01/install.111/b32285.pdf
    But I don't know where to download and how to install X Window System for Oracle Linux 5.
    Can any folk provide a link to download X Window System and tutorial to install it for Oracle Linux 5 ?

    You can address the problem in a number of different ways.
    You can install X-windows from the installation DVD or setup access to the Oracle public software repository as described in http://public-yum.oracle.com. In which case, the command to install X-windows is: yum groupinstall "X Window System"
    Or, you login remotely and and use SSH with X-forwarding, in which case the software on the server will use the X-Windows server on your client system. This is probably the preferred way since you do not have X-windows installed on the server. For more details about SSH forwarding and howto, please see Install Oracle 11gR2 on Ubuntu Linux 11.04 (64-bit) Howto part 2 Oracle Universal Installer.

  • Unable to install Update Windows 7 x64-based system KB2952664

    Unable to install Update Windows 7 x64-based system KB2952664,  Error code 80073701.  Internet Explorer 11 for Windows 7(although IE 11 is already installed) fails to install also(at the same time)

    Hi,
    Please try to do download oracle database 11.2.0.3.0  64 bit
    Oracle Database 11.2.0.3.0 is certified on Microsoft Windows x64 (64-bit) 7
    Thanks,
    Rajasekhar

  • How to install only windows 7 on macbook 4.1?

    how to install only windows 7 on macbook4,1?
    i have windows 7 dvd, i want to install windows 7 only and does not want to keep  msc os 10.5.8. currently i do not have any cd or DVD which came with my macbook. So i need to know:
    1- how i install windows 7?
    2- 32bit or 64bit windows?
    3- after installing how to get drivers of my macbook?

    There is no disc of Mountain Lion, and if there were it would not contain drivers, those  are on your original OSX disc (the one that came with the machine) or you can download them using Boot Camp Assistant.
    You will need a 64 bit copy of Windows, OEM or retail.

  • Using USB for Bitlocker in a Bootcamp install of Windows 7 x64 Ultimate on early-2011 Macbook Pro

    First of all some details on my current setup:
    Macbook Pro 15" (early 2011) with a i7 QM processor and 8 GB RAM, Superdrive and HD installed
    Mac OS X 10.7.3
    Windows 7 x64 Ultimate in a Bootcamp setup
    Existing partitions on HD are EFI, MacOS X, Bitlocker Startup, Windows
    I removed "Recovery HD" after creating DVD image contained in latest Lion installer from AppStore.
    What I got so far:
    It took some time to find a way for Windows getting a second partition to be used for Bitlocker startup files. Using existing partition layout I replaced previously existing "Recovery HD" partition for Bitlocker partition in Windows (after taking dd-based image of Recovery HD).
    Recently I tried to enable Bitlocker and continued to fail on Bitlocker System Check claiming to have no access on USB while booting. And that's my issue ...
    I read about using Windows' diskpart to have a GPT partitioned USB stick containing single NTFS partition. I tried to achieve the same with disk management in Mac OS X though it was creating a hybrid MBR/GPT setup that wasn't recognized by Windows at all. Then I tried partitioning in Mac OS X to have GPT partitioning, used Clonezilla Live CD's gdisk to apply hybrid setup another time. I even tried to do the whole partitioning in Linux using gdisk, but Windows still didn't recognize the formatted partition on USB stick then. So, the only way found is using diskpart in Windows to get a GPT-based USB-stick with a single NTFS partition.
    I put my startup key there (attributed as hidden, system file) and tried to restart several times. On every boot Windows is prompting for inserting valid startup key as it wasn't found. The partition is encrypted already and entering the printed 48 digits recovery key gets me in every time.
    If I keep the stick inserted the boot is noticeably delayed, but it's instantly continuing as soon as I unplug the stick. So there is something processing the stick ... I tried different sticks, but hope it's not related to using one special stick since they are used to support similar (equivalent) interfaces, aren't they?
    Don't tell me about using TrueCrypt or similar as I prefer to use existing software instead of adding 3rd-party software doing things the same way. And for True Crypt USB must be readable at boot as well. And previous trials with different approaches rendered all failing at some point of setup. Finally, I don't want to reinstall existing Windows as it keeps me from working even more.
    Found some post regarding trouble with Lion installations (e.g. I can't use rEFIt ... it simply didn't show up and this seems to be related to using Lion), found the KB article of Apple on preparing USB external storage for use at boot, but all troubleshooting hints didn't help.
    What the heck is wrong with this setup?
    EDIT: There is no problem to have Bootcamp starting previous Recovery HD partition now Bitlocker startup partition instead of originally prepared Bootcamp partition, which is encrypted now. This is in contradiction to other posts here. I'm sure Apple support isn't best choice to ask for support as this problem is MS specific and thus Apple won't care that much ...

    Well, I've seen lots of those threads as well and most failed to manage cooperation of Bitlocker and FileVault, have trouble to get a second partition for windows to use with bitlocker or truecrypt etc. But these issues don't apply to me anymore.
    Next there are threads instructing how to get a USB stick to work with Bitlocker claiming to have GPT instead of MBR so EFI is gaining any access on them. Those cases seem to work with MacBooks running with Windows, only, thus passing the issues mentioned in paragraph before as well.
    And there is my confusion originating from: I can remember some sites claiming to have trouble with EFI on a Mac using Lion, but all those sites are older than Lion's final release date. So I don't know if there is a similar issue today or if I'm actually missing some option ... rEFIt isn't working with Lion according to the refit site itself. Some sites claim EFI is behaving differently on whether there is a super drive or not as Lion isn't supporting USB booting as long as booting from DVD/CD is available ... what's true about those facts? Is my problem related to having a super drive? Are things getting better as soon as I'm replacing my superdrive by a second internal drive? Is it that strange or some sort of plausible behaviour?
    According to GPT, Windows 7 is obviously failing to properly detect hybrid MBR/GPT setups on USB sticks while that's what MacOS' disk manager is doing on having GPT-based single partition stick with exFat format. Instead of using the second hybridized partition it's accessing the protected part, only. If I'm converting a disk to GPT in windows everything works fine, but then without hybridized MBR ...
    Regarding the fans I'm with you ... as soon as processor load is exceeding 5% the fans get quite noisy ...

  • How to get preinstalled windows 8 x64 oem?

    Hey there. I have a laptop hp 17-e019dx. It was preinstalled windows 8 x64 oem. Later I installed ubuntu and delete all data on the hard disk.
    I now want to install  windows 8 x64 oem. But I do not have windows 8 x64 oem.
    How to obtain a preinstalled windows 8 x64 oem?

    erico wrote:
    If not, you can purchase a usb recovery flashdrive from HP. The cost is minimal.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07143&cc=us&dlc=en&lc=en&product=6627485
    If you use this option, then how can I get in Belarus (Gomel) if the input fields for zip code contains 5 characters, and for Belarus Gomel (246000) zip code contains 6 characters?
    https://h10025.www1.hp.com/ewfrf/wc/mediaOrder?softwareitem=729076-001&cc=us&dlc=en&lc=en&os=4132&pr...
    I understand this service extends to the USA and Canada?

  • EMET v4.1 not installing on Windows 7 x64

    We are testing EMET v4.1 in our environment, and I created a package in SCCM 2007 using the recommended command line from the documentation:
    msiexec /i "EMETSetupv4.1.msi" /qn /norestart
    When pushed to a Windows XP x32 system via sccm it worked fine to install, and then we configured the settings using the custom ADMX template, and everything is working great.
    When pushed to our Windows 7 x64 system's via SCCM it keeps failing, so I tried installing manually and we get the message:
    "The advertised application will not be installed because it might be unsafe. Contact your administrator to change the installation user interface option of the package to basic"
    Does anyone know why the EMET msi is causing this when set to install using the /qn switch? We use this switch to install many other .msi's via SCCM and have never had this issue before, this seems very weird with a Microsoft branded .MSI.
    I changed the /qn to /qb as the message indicates and then we get a message that .net 4 framework is not installed. We have the
    Microsoft .NET Framework 4 Client Profile (4.0.30319) installed on our Windows 7 x64 image, I don't see any guidance regarding exactly what version of .net framework is required, does anyone know if the full/extended version is needed
    or a newer version?

    If you choose "unblock" from the MSI's file properties dialog, redistribute to your DPs, and try to install again, does the issue go away?
    Jason | http://blog.configmgrftw.com
    I did notice this on the MSI, I will try this and see if it makes a difference. However I did try to just install it locally using the same switches, with the MSI having been unblocked and I still got the same thing. But I will double check this.
    Also does anyone have any insight on what .net is required for EMET? I'm going to try the Full .Net 4 framework, since we only have the client profile installed right now.

  • Will not install on windows 7 x64

    I get error on install on a Dell Windows 7 x64 bit laptop - trying to install the Cloud gives me the same error -
    There is a problem with this windows installer package
    A program required for this install to complete could not be run.
    Contact your support personel

    There is a problem with this windows installer package
    A program required for this install to complete could not be run.
    Contact your support personel
    Perhaps let's first try updating your Apple Software Update.
    Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
    If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

  • Adobe Flash will not install on Windows 7 x64

    Hello,
    I find myself in a bit of a pickle, which I have neither definitive answer nor logic to why this is happening. Whenever I install Adobe Flash I get an error message in a popup window as described below.
    Host
    Unable to load application configuration
    First of all I thought…? This can happen if the processor clock is out on the motherboard. I rebooted and checked the time and date stamp in the BIOS and it’s correct. Everything else works fine; it’s just Adobe Flash that is causing the problem. I am running Windows 7 x64 and selected Windows 7 x64 when I installed Flash. Shockwave, Air and all other Adobe applications were fine… it’s just Adobe Flash that is causing the problem. Any Answers would be appreciated; I’m left scratching my head with dismay because I cannot for the life of me know what is causing this error message.
    It’s the same for MSIE9 as well it will not install and comes up with the same error message.
    Thanks
    [RESOLVED]
    I took a second look at the BIOS and didn’t spot this the first time I looked. The time was correct, but out by 20 seconds which was the reason why updates and installations were in disarray. I never would have thought 20 seconds would have made much of a difference. But it does and I corrected the time to the precise seconds to pinpoint accuracy, saved the BIOS and loaded the OS and tried again and it worked first time.
    So the moral of this topic is, if you’re getting a message in a window which says the following…
    Host
    Unable to load application configuration
    Check the clock on your BIOS first, if the seconds are out but the time is correct, this the likelihood of the problem is being caused by the BIOS clock.

    What is the exact error you are getting?
    Have you tried to run the offline installer from http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#Ins tall_in_a_firewall_proxy_server_environment ?
    If that still causes you an error please post your Windows version & edition.
    P.S. if your Windows user account has administrative permissions, then you don't need to go into the BIOS to correct your clock; you can do it from withing Windows, either manually, or using Atomic Clock Sync.

Maybe you are looking for