How to install Onekey Recovery Boot System

Hello,
A month ago, I bought new Lenovo G460. The unit have Onekey Recovery button that can make you boot to Onekey Recovery System (have own partition)
Yesterday, I recovered my Windows 7 and it was failed. Suddenly, all my Recovery System partition gone..
Can someone help me how to get the application and how to install on that partition?
Thanks,
PinSki

your welcome.

Similar Messages

How to install Linux on UEFI systems where GRUB fail to install?

A few of us are asking:
How to install Linux on UEFI systems where GRUB fail to install? Because after installing Linux, my MBR is messed up, and I get a "no operating system found" at system startup.
abvasili
I'm just a volunteer. I like to help others where I can. Do my ideas work? I hope so. o_O
Who helped you today? Do not forget to thank him.
My hardware: TP x120e 0596-2ru. Windows 7, sp1, 64Bit, English, installed in UEFI mode.
Solved!
Go to Solution.

Hi again,
I would like to answer to another question, just in case:
Question: Can I dual boot Win7 and Linux on a UEFI capable bios?
Answer: Yes you can. If your HDD is formatted in MBR partition table (or msdos) than you can install first windows 7 and than the distro of your choice. BUT, careful, if you install windows from a DVD media it will convert your HDD in GPT partition table and dual boot will be almost impossible... (or will give you a lot of headache) to avoid this, dump the win7 iso to an usb using Windows 7 USB/DVD Download Tool. Installing from USB will not change the hdd in GPT partition table.
take care
abvasili
I'm just a volunteer. I like to help others where I can. Do my ideas work? I hope so. o_O
Who helped you today? Do not forget to thank him.
My hardware: TP x120e 0596-2ru. Windows 7, sp1, 64Bit, English, installed in UEFI mode.

How to install the Recovery Catalog

Hi:
How to install the recovery catalog? I used the following commands from the menu and it didn't work:
connect rman/rman
@?/rdbms/admin/catrman
There is no catrman.sql exists.
Thank you very much.

If you are using Oracle8i, make sure your compatibility is set to at least 8.1.0 and you are connected to the catalog database. Then type create catalog; at the RMAN command line.

How to install JCO in linux system?

How to install JCO in linux system?Thanks.

Hi,
This is SAP Business one system administration forum. Please find correct forum and repost above discussion to get quick response.
Please close this thread here with helpful answer.
Thanks & Regards,
Nagarajan

How to install REDUCE Computer Algebra System

How to install REDUCE Computer Algebra System in macbook pro Yosemite 10.10

That doesn't appear to have been updated for nearly 5 years.
The latest OS X version supported is 10.6 Snow Leopard.

How to install a recovery partition after installing a new Hard drive? and FileVault help.

Hi,
I recently swapped out hard drives and when I did a Time Machine backup to the new drive, I noticed there was no Recovery HD partition for my drive. Is there a way to install it back on my MacBook Pro (Late 2011, running 10.7.4)?
On a slighlty different topic FileVault won't let me encrypt my new HD it says "Some disk formats don’t support the recovery partition required by encryption. To use encryption, reinstall this version of Mac OS X on a reformatted disk."
What formatting does my disk require for FV to be turned on? Currently it is Mac OS Extended (journaled)
If there is a solution to solve both these issues, or any one issue it would be appreciated.

The formatting being referred to is actually the presence of the Recovery Disk.
You can't enable FV2 without a recovery partition being present. The reason is strictly logical: if your entire disk was encrypted, how could you run the unencryption procedure you need to start up? That would itself be hidden behind the encryption. Hence, for FV2 to be able to work, you must have a Recovery disk present.
When you boot up with FV2 enabled, the login screen you see to enter your password is actually running from the recovery disk (invisible to the user). After you enter your password, recovery boots your encrypted partition and logs you in to your account.

How to install 0FI_GL_10 in OLTP system

Hi! Tell me please how can I install 0FI_GL_10 in OLTP system (for next replication to BW system). Do I need install it from BI Content, that is do I need install BI Content in OLTP system at first?
Thanks,
Olga

Hi! I run RSA9. I got message "The application component hierarchy was transfered from the Content". But the folder "SAP" in "Source Systems" stays empty: no any subfolders and source systems in it. When I try to open folder "SAP" I get message "No entry for BW_USER in table RSAMIN available".
The folder "BI" exists in Source Systems but with strange content: something called "Sender", when I click twice on it I see "NODESNOTCONNECTED" and different data sources in it, for example, "Aggregated Status for Area of Responsability"... "Planning Calendar" ... etc
Please else any ideas?
Thanks,
Olga

How to install a recovery partition

After installing 10.10.1 - 14B25 I no longer have a recovery partition. The OS X 10.10.1 works fine but I am lost on how to add a recovery partition. Some help on how to after the fact create an OS X 10.10 .1 recovery partition will be appreciated. I failed to save the 10.10 installer

BINGO.... I downloaded the full installer 5 GB and ran it over my 10.10.1 Macintosh HD with no Recover Partition. Bingo, I now have my primary HD back with an updated 10.10.1 Recover Partition
Kappy,
I though your assessment was correct; however, it worked for me and I did NOT have to erase my Macintosh HD
All is well again and it was a time consuming learning experience and I now have a 10.10.1 Recovery Partition

How to install a larger boot drive

I have a mac pro 1.1 and am looking to install a larger boot drive without satrting over from scratch. In other words i want to migrate all info from current boot drive to a larger capacity b/c i have run out of space on the current boot drive. I would like to know the most effecient, stable and painless way to go about this process. Of course ensuring I retain ever bit of my data.

Either Disk Utility, or my choice would be Carbon Copy Cloner (it's free). Install your new drive in a spare sled, partition and erase it (use GUID format partition map) and clone with CCC. Make sure the drive is named something appropriate before you do this process (eg New Drive). Then reboot holding down the Option key, and Bob's your uncle.
Matt

How to create Lion recovery boot usb WITHOUT recovery partition?

I give up. I can't find the answer to this. So, I'll just ask and hope.
I have a mid-2011 mini that was upgraded to Lion. However, it had a Bootcamp partition running Windows 7.
Apparently, whoever upgraded my machine didn't create a recovery boot disk before upgrading.
So, I have no recovery partition and apparently no ability to create a recovery boot usb without one.
Apple's ******** support policy is to completely wipe the hard drive and reinstall everything--which is simply not going to happen.

Eric. wrote:
Have you tried this?
http://support.apple.com/kb/DL1433
I made one on a USB flash drive.
Problem with that solution is that:
Note: In order to create an external Lion Recovery using the Lion Recovery Assistant, the Mac must have an existing Recovery HD.
If you kept a copy of the installer, then open it up, and restore the InstallESD.dmg to an empty partition or flash drive. Do note that doesn't give you the Recovery HD, but you won't need one since you can reinstall w/o downloading anything but additional components from Apple's servers.

How to install two different operating systems?

Hi Guys,
In my macbook, I was using Server 2003, installed through Bootcamp. For some reason I urgently needed to install Windows XP on another partition i.e, I needed two operating systems natively without being used VMware.
Could you please post how could I succeed this through Bootcamp or any other third party software?
I really appreciate for your fast response.
Reg,
Sri.

Other possible setups:
run OS X from external
- there are even ExpressCard eSATA - and it may be possible with some to install later versions of Windows 2008 or 7.
Shrinking Windows partition (backup wtih WinClone or something) will interfere to some extent with the Apple OS Switcher but does work; then install in there.
Using a PC to run and manage Windows - after using my Mac for almost 3 yrs - is so much easier, and flexible, even though the Mac Pro can have as many Windows partitions as you want on multiple drives (internal) and partitions.
I know you can install XP after Vista or 7 is installed w/o editing the boot.ini or using EasyBCD to 'fix' Windows boot manager.

How to Install JAVA on working systems

Hi gurus,
system : Windows 2003 64bit and SQL
on this server i have already installed :
DEV + Java (test/development)
BWD (development for BW NW2004s)
SSM + Java
i would like to install Java for BWD. Which packet should i install. How to start install.
Regards.

Hi Markus,
i go through Planing->Technical Infrastructure Guide -> Installable Software Units -> SAP Systems Based on SAP NetWeaver Application Server with Usage Types (Software Units) -> SAP Application Server Java is it correct ?
Next i assume : Installation Guide - SAP NetWeaver 7.0 including EHP 1 correct ?
Media Label : SAP EHP1 FOR SAP NETWEAVER 7.0 Java based Software Components correct ?
I am little confused . Please help.
Regards

Qosmio X300-14U - How to make a dual boot system?

Hello to all Toshiba X300 users!
I have recently bought X300 14U and I am trying load XP as a dual boot. I have used floppy, I have done everything in my power to dual boot.
Please could somebody help? I have checked the forum to see how to do it but it keeps on telling the same thing what I have done.
I have tried to ask Toshiba what chipset it is using but they are just guessing.
Could some please point in the right direction tell which store manger I need?
Which chip set and SATA drivers I need an how to apply these to make a successful dual boot with XP Pro SP2?
I have Vista Home premium installed.
I have done as much as I can do.
I have even tried to run virtual pc but Vista home Premium does not support it.
Than k you very much

Hello
Check also THIS page. At the end you can find a guide for "Slipstreaming SATA driver into WinXp boot CD using nLite".
I don't understand why you mean this notebook must support everything. As I can see this notebook model is not supported for WXP and if you will install it successfully you will still missing important drivers, tools and utilities and you will not be able to use WXP as Vista.
On one side I understand you but other way to have WXP with limited functionality is also not the solution.

How to install windows on a system already running Arch? [SOLVED]

Hello.
I use Arch for my daily use, but I'm having a big problem, my little brother. He wants to play videogames on the laptop and that's it, I know you can do it from Arch but I honestly don't want to install Steam neither anything else than what I need so I'm going to install Windows for him to play. I'm currently partitioning my HDD, but I was reading and I found out that you need GRUB in order to dual boot, I use syslinux, so my main question is, can I simply install windows and then install GRUB? Or do I have to do something before this?
Any help is welcome as I'm really new to dual booting Linux with Windows and the last time I used Windows was in 2006. So please help me or refer me to a good article as I'm scared to break something.
Last edited by d15d18a (2014-12-24 04:28:58)

Syslinux works great!! And yeah, I had an option like that but it was inside Windows power management, not in my BIOS, I've dissabled it and it works like a charm... But I'm angry, I did all this, I bought this mother f***er 3 Steam games for more less 80 bucks, a 30 bucks PC gaming controller from Radioshack and he ended up downloading a Gameboy Emulator and playing some Pokémon game
Thank you very much for the help, everything works fine now. And merry Christmas

How to install apex on my system?

Hi,
I have installed Oracle 9i on my system. I am able to use the Oracle HTTP server and able to access ISQL through the following path := http://localhost:7778/ISQL.
I have downloaded apex 3.1. zip file. Please let me know the exact path where I need to extract the file so that I can use it.. My Oracle is installed in C:\\OracleNT\
Any help would be greatly appreciated.
Thanks and Regards,
coolsub82

Subash:
Please read the installation instructions at http://download.oracle.com/docs/cd/E10513_01/doc/install.310/e10496/toc.htm
Varad

How to install Onekey Recovery Boot System

Similar Messages

Maybe you are looking for