How to install ONLY Remote Management Agent ?

Hello !
Is anybody know how to install on windows WS only RM part of ZEN Agent:
Remote Managemet, Mirror Driver ?
Without Application launcher that I can't remove from option list during
setup (I launch ZfDAgent.msi) and without X-Tier part.
After such installation the additional ZEN prompt window for login/password
appears during Windows start-up.
Can you tell how to remove it?
Thanks for attention.
Vladimir

On Fri, 16 Feb 2007 20:58:10 GMT, Vladimir Perepechenko wrote:
> Unfortunately I see that I can't avoid nwgina.dll installed during RM only
> install .
yeah, but the nwgina shouldn't normally show up during login
Marcus Breiden
If you are asked to email me information please change -- to - in my e-mail
address.
The content of this mail is my private and personal opinion.
http://www.edu-magic.net

Similar Messages

How to install only catalog manager in obiee 11g client

hi,
i have obiee 11.1.1.5 sever on linux & client on windows.
since obiee 11g client does not comes with catalog manager.
how to install only catalog manager on windows machine.
Just to access catalog manager, Do i need to install fresh DB & OBIEE on windows?
thanks,

Hi,
Download Client tool below link and also via BI Presentation Administration home page
http://www.oracle.com/technetwork/middleware/bi-enterprise-edition/downloads/bus-intelligence-11g-165436.html
Note: catalog manager is present in obiee11.1.1.6.0
Thanks
Deva
Edited by: Devarasu on Oct 24, 2012 3:41 PM

How to install and configure management agents on Tru64 Cluster

We are busy rolling out the Oracle 10g Grid Control to our enterprise and one of our targets is a two-node Tru64 cluster with shared file systems, i.e., each node can see (read/write) the file systems concurrently. Trucluster software is responsible for the clustering management.
On node1 we have a set of databases each with its own dedicated listener; the same for node2. Each cluster managed service set has its own logical hostname. For example, we have on node1:
db1 (database)
listener-db1 (listener for db1)
node-db1 (logical hostname for db1 service)
Upon switchover or failover, the database and listener are brought up on node2 and we need to cater for this in our management agent configuration. I am trying to work out how we install and configure the management agents in such a configuration. Has anyone done this or does anyone know how to set up the agents suitably?
I have already installed the agent on one of the nodes - that worked fine, and I have even managed to start another agent up using the installed software home on the other node using "agentca -f"

You the Cluster type of configuration. It is documented in the install guide you have

1456: The remote management agent is unable

Hi
I have :
Server NW6.5 Sp5
Zenworks desktop 6.5 SP2
Client NT4 SP6 - Client novell 4.90 SP2
W2000 SP4 - Client novell 4.91 SP2 - Agent Zen SP2
WXP SP2 - Client novell 4.91 SP2 - Agent Zen SP2
The problem is that I can't connet with "remote management" some PC with XP;
The error in log file is:
#(464)# 10.16.27 02/16/06 Normal : Loading :
C:\Programmi\Novell\ZENworks\WMSchApi.dll
#(464)# 10.16.27 02/16/06 Critical : Workstation NOT yet authenticated...
#(464)# 10.16.27 02/16/06 Critical : ZENNDSUtil: initializeContext()
failed...
#(464)# 10.16.27 02/16/06 Normal : Reading workstation DN and tree name...
#(464)# 10.16.27 02/16/06 Normal : workstation DN -
PC01-WINXP-00:0B:CD:F8:F2:44., treename - TREE_GROUP
#(464)# 10.16.27 02/16/06 Normal : Loading :
C:\Programmi\Novell\ZENworks\WMSchApi.dll
#(464)# 10.16.27 02/16/06 Critical : Workstation NOT yet authenticated...
#(464)# 10.16.27 02/16/06 Critical : ZENNDSUtil: initializeContext()
failed...
#(464)# 10.16.27 02/16/06 Normal : Neither policy settings active. All
operations disabled.
#(464)# 10.16.27 02/16/06 Normal : ZENNDSUtil: Finished reading policies
#(464)# 10.16.27 02/16/06 Normal : ZENNDSUtil: Unloaded modules...
#(464)# 10.16.27 02/16/06 Normal : UnLoadZenAutilLibrary :Successfully
unloaded ZenAutil.dll
#(464)# 10.17.48 02/16/06 Normal : RMSessionFinished - Begin
If I check if the ogject workstation is authenticated on NDS, I not find the
connection.
I can connect only with che workstation that are list in connection.
Why some workstation connect to NDS ?
Thanks for help.
Gianluigi

Try deleting the workstation object and reboot the workstation (sometimes
a 2nd reboot is required).
> Hi
>
> Another information, if I use only the agent with out client novell, I
have
> no problem because the workstation is connect to NDS.
> If I want use client novell and Middle Tier is possible set Middle Tier
how
> default connection for remote manager ?
>
> Thank
>
> Gianluigi
>
> "Gianluigi Cortinovis" <[email protected]> ha scritto nel messaggio
> news:[email protected]...
> > No, I have disable windows firewall.
> >
> > Gianluigi
> >
> > "craig wilson" <[email protected]> ha scritto nel messaggio
> > news:[email protected]...
> >> Windows Firewall perhaps?
> >>
> >> --
> >> Craig Wilson
> >> Novell Product Support Forum Sysop
> >> Master CNE, MCSE 2003, CCNA
> >>
> >> Editor - http://www.ithowto.com
> >>
> >> (Seeking Full-Time Expert? Drop me a note :> )
> >>
> >>
> >> "Gianluigi Cortinovis" <[email protected]> wrote in message
> >> news:[email protected]...
> >>> Hi
> >>>
> >>> I have :
> >>> Server NW6.5 Sp5
> >>> Zenworks desktop 6.5 SP2
> >>>
> >>> Client NT4 SP6 - Client novell 4.90 SP2
> >>> W2000 SP4 - Client novell 4.91 SP2 - Agent Zen SP2
> >>> WXP SP2 - Client novell 4.91 SP2 - Agent Zen SP2
> >>>
> >>>
> >>> The problem is that I can't connet with "remote management" some PC
with
> >>> XP;
> >>> The error in log file is:
> >>>
> >>> #(464)# 10.16.27 02/16/06 Normal : Loading :
> >>> C:\Programmi\Novell\ZENworks\WMSchApi.dll
> >>> #(464)# 10.16.27 02/16/06 Critical : Workstation NOT yet
> >>> authenticated...
> >>> #(464)# 10.16.27 02/16/06 Critical : ZENNDSUtil: initializeContext
> >>> failed...
> >>> #(464)# 10.16.27 02/16/06 Normal : Reading workstation DN and tree
> >>> name...
> >>> #(464)# 10.16.27 02/16/06 Normal : workstation DN -
> >>> PC01-WINXP-00:0B:CD:F8:F2:44., treename - TREE_GROUP
> >>> #(464)# 10.16.27 02/16/06 Normal : Loading :
> >>> C:\Programmi\Novell\ZENworks\WMSchApi.dll
> >>> *******************************************
> >>> #(464)# 10.16.27 02/16/06 Critical : Workstation NOT yet
> >>> authenticated...
> >>> #(464)# 10.16.27 02/16/06 Critical : ZENNDSUtil: initializeContext
> >>> failed...
> >>> *******************************************
> >>> #(464)# 10.16.27 02/16/06 Normal : Neither policy settings active.
All
> >>> operations disabled.
> >>> #(464)# 10.16.27 02/16/06 Normal : ZENNDSUtil: Finished reading
policies
> >>> #(464)# 10.16.27 02/16/06 Normal : ZENNDSUtil: Unloaded modules...
> >>> #(464)# 10.16.27 02/16/06 Normal :
UnLoadZenAutilLibrary :Successfully
> >>> unloaded ZenAutil.dll
> >>> #(464)# 10.17.48 02/16/06 Normal : RMSessionFinished - Begin
> >>>
> >>>
> >>> If I check if the ogject workstation is authenticated on NDS, I not
find
> >>> the connection.
> >>>
> >>> I can connect only with che workstation that are list in connection.
> >>>
> >>> Why some workstation connect to NDS ?
> >>>
> >>> Thanks for help.
> >>>
> >>> Gianluigi
> >>>
> >>>
> >>
> >>
> >
> >
>
>

How to install Adobe Application Manager?

How to install Adobe Application Manager? I downloaded it, but can't install.
Just purchased the CC for photographers. Have been using Photoshop since version 3.
I have been studying your support docs for several days and have no business messing around with something called, .gz files and installation logs. Totally unsuccessful "Updating" my CS6 or CS6 bridge or Extension Manager or the Adobe Support Advisor by the CC Desktop.
Have no Photoshop CS6 because I followed your CC support instructions.
Uninstalled my CS6 today so I can finish a job tomorrow. Bad decision on my part because I can't reinstall it and am unable to correct
this problem.
I was able to use CC to update LR, but am absolutely too afraid to touch it now.
I have been waiting inline for Chat also, but the numbers ahead of me are going up.
If someone in this Community forum can help me, it would be fabulous.
Thanks very much.

Uninstalled Creative Cloud.
Downloaded it again - 4th time.
Deleted a AAMDetect file from the Library/Internet Plug-ins
Downloaded and installed Adobe App Manager and an icon for it is on my Desktop
Installed Creative Cloud.
OK.
Now how do get my Photoshop CS6 back before I download Photoshop CC?
CS6 is not listed in the available Apps in the CC Desktop.
Support wait time right now is 2 hours by phone.
After sitting on Chat yesterday only to see the people "waiting ahead of me" go from 17 to 18, I gave up.
Please advise.
Thanks again.

How to Install SQL Enterprise Manager ?

The standard installation file which sap gives sql4sap.vbs doesnt install the Enterprise manager.
How to install SQL Enterprise Manager (ECC6+Win2003).
regards,
dev

Hi,
Server type is normally "Database Engine". You can use the Dev. Studio to connect to various other types (e.g. Reporting Services, Analysis Service etc.)
The Servername is the instance name you want to connect to. For a default instance it is your machinename, for a named instance it is Machinename\Instancename.
Authentication can be Windows Authentication if you are logged on as a local Admin. For an ABAP System only Windows Authentication is possible, for a JAVA System the SQL authentication is necessary, so that you can logon as 'sa' with the password you provided in the setup.
Regards
Clas

How to install only OATS for Functional Testing ?

How to install only OATS for Functional Testing for Oracle EBS?
I tried micro installation, but installation tried to install whole test manager/oracle xe db/Weblogic etc..
I want to evaluate how it works, can we leverage for Functional/regression tesitng...
Please advise...
Thanks
Edited by: 956069 on Aug 30, 2012 6:19 AM

Hello
You should be able to install OpenScript only using the micro install distribution. You can just skip the steps concerning XE & WLS installation/connection.
JB

1456 the remote management agent is unable to read information from edirectory

I have novell 6.5 sp6 and Zfd 7sp1.
From consoleOne I can done the action "remote control" when the
workstation is already turn on.
I can do the "remote wakeup" but after I can't do the login. I can't see
the window novell login.
When the machine is up I have tried to do the action "remote control" but
I have this error:
1456 the remote management agent is unable to read information from
eDirectory.verify the workstation object is valid and the middle tier
server is up and running.
Into the event log I have seen this (under application):
Remote operator: cn=moni.ou=mio.o=mytree.t=tree
console address: CN=P30g-0510_1_1_1.ou=workstation.o=mytree.t=tree
invalid NDS authentication informatiom.
Please, Can sonmeone help me?
thanks for all and excuse me for my poor english I'm italian.
Regards
Monica

I have found my problem:
On my server there isn't SLP configured.
Now my problem became how to configure SLP !!!
thanks for all
Regards
Monica

How to Install Analytic Workspace Manager 10.1.0.4.

Hi,
how to Install Analytic Workspace Manager 10.1.0.4.?
Many thanks before.

Thank you, we have this :
SELECT COMP_NAME, VERSION, STATUS FROM DBA_REGISTRY WHERE COMP_NAME LIKE '%OLAP%';
COMP_NAME VERSION STATUS
OLAP Analytic Workspace 10.2.0.1.0 VALID
Oracle OLAP API 10.2.0.1.0 VALID
OLAP Catalog 10.2.0.1.0 VALID
Is Analytic Workspace Manager installed ? How to know its version ?
Thank you.

How to install the Workflow Manager for 10g ?

how to install the Workflow Manager for 10g ?
where can I find the information ?

Ting,
When you install the workflow server from the 10gdb DB, it will install the workflow manager as well. Please make sure you read the Metalink note 265554.1 for known issues and tips. Make sure you give the correct information in the WFCA as mentioned in the metalink note.
Cheers,
Raja

How to install the Workflow Manager for ?

how to install the Workflow Manager for ? where can I find the information ?

Ting,
When you install the workflow server from the 10gdb DB, it will install the workflow manager as well. Please make sure you read the Metalink note 265554.1 for known issues and tips. Make sure you give the correct information in the WFCA as mentioned in the metalink note.
Cheers,
Raja

How to install only windows 7 on macbook 4.1?

how to install only windows 7 on macbook4,1?
i have windows 7 dvd, i want to install windows 7 only and does not want to keep msc os 10.5.8. currently i do not have any cd or DVD which came with my macbook. So i need to know:
1- how i install windows 7?
2- 32bit or 64bit windows?
3- after installing how to get drivers of my macbook?

There is no disc of Mountain Lion, and if there were it would not contain drivers, those are on your original OSX disc (the one that came with the machine) or you can download them using Boot Camp Assistant.
You will need a 64 bit copy of Windows, OEM or retail.

How to install LenovoEMC Storage Manager for Linux: Version 1.4.4.14439

An Small step by step how to install this app. I this first example it was installed on Red Hat 6 Linux
How to install LenovoEMC Storage Manager for Linux: Version 1.4.4.14439.
1 - Download it from https://lenovo-na-en.custhelp.com/app/cust_alp/p/1031,1150
2 - Change File permissions ( chmod +x setup-1.4.4.14439.bin)
3 - Now you can install so execute this sintaxis : ./setup-1.4.4.14439.bin
4 - When app installation finishes, you must do it with this file into folder installation (chmod +x LenovoEMCStorageManager)
5 - Then to open the app execute it: ./LenovoEMCStorageManager
Video Tutorial
How to install LenovoEMC Storage Manager for Linux: Version 1.4.4.14439
In This second example I installed same version on Ubuntu 13.10. Look at the end of messages of thread and you will see this steps
Install Storage Manager setup-1.4.4.14439.bin in ubuntu.
Attachments:
lenovoemcstoragemanager.jpg ‏27 KB

Hello everyone ,
I have a lenovo px4-300d, I'm on Ubuntu 13.10 64bits with Gnome 3 as GUI and I'm trying to install the LenovoEMC storage Manager but it failed :
Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
Launching installer...
Graphical installers are not supported by the VM. The console mode will be used instead...
Preparing CONSOLE Mode Installation...
===============================================================================
Choose Locale...
    1- Deutsch
   ->2- English
    3- Español
    4- Français
    5- Italiano
    6- Nederlands
    7- Português (Brasil)
    8- Svenska
CHOOSE LOCALE BY NUMBER: 2
=======================================================
Installer User Interface Mode Not Supported
The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The valid UI modes identifiers are GUI, Console, and Silent.
=======================================================
Is it still aproblem with the 64 bits architecture ?
Have you find any solutions ? Thank you very much

How to install only Garageband from OS 10.6 install discs?

Hi. I recently got a new Mac with OS 10.6.2. It came with the iLife Apps installed.For reasons I won't get into ......I had to try to install the older iMovie 08 (which I believe had some sound files connected to Garageband).After attempting that install.....I noticed that garageband had dissappeared.......the icon both in the dock and in applications had dissappeared.
So I believe I need to reinstall Garageband.........but not sure if its on install disc 1 or 2 and how I install only Garageband and not the other iApps? Thanks for any help.

Bruce Thompson wrote:
how I install only Garageband and not the other iApps?
http://www.bulletsandbones.com/GB/GBFAQ.html#reinstallgb
(Let the page FULLY load. The link to your answer is at the top of your screen)

How to install only Roxio CD Burner Program from the Recovery CDs?

I bought a T400 a few weeks ago in Korea.
But my company uses English, so I had to install a Windows XP English version.
However, at that time I lost the Roxio software.
I have the recovery CDs for T400 Windows XP PRO SP2.
If it is possible, then please let me know how to install only Roxio CD Burner Programs from the Recovery CDs.
Thanks.

Hello,
unfortunately it´s not possible to install just one program from recovery cd´s.
But on Lenovo support pages, there you should find your software and applications.
Please visit with IE and let autodetect your system.
Then you should able to choose which type of software is availible for you.
Choose CD and DVD drives.
Hopefully the T400 department is up to date now.
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español

How to install ONLY Remote Management Agent ?

Similar Messages

Maybe you are looking for