How to install oracle 10g on suse linux

Hi,
can anybody let me kbow how to install oracle 10.2 on suse linux.....
i have installed suse linux but couldn;t able to install oracle 10g on the same....
looking for gud suggestion.....

These two are good to start with
Installing Oracle Database 10g on SUSE Linux Enterprise Server 9 and on SUSE Linux Professional 9.1, 9.2, and 9.3
http://www.puschitz.com/InstallingOracle10gOnSUSE.shtml
Oracle Products on SUSE Linux Enterprise: Documents
http://www.novell.com/products/server/oracle/documents.html

Similar Messages

  • Problem with installing Oracle 10g on Suse Linux

    Hi everybody!
    I downloaded Oracle 10g Express from this url:
    http://www.oracle.com/technology/software/products/database/xe/htdocs/102xelinsoft.html
    it is free version for developers.
    I copied it into computer where was installed Suse Linux Enterprise Edition.
    But when I run it shows this kind of error:
    error: rpmReadSignature failed: region failed: BAD, tag 15872 type 2047 offset 20480 count 4096
    error: oracle-xe-univ-10.2.0.1-1.i386.rpm cannot be installed
    It was downloaded without any problem. But checksum is different from that shown on website. I think this is the problem.
    What is the problem? Does anybody know answer?
    Regards,
    Seti's fiction

    Yes, you appear to have a bad copy.
    I have not had a problem when the check sum matched. Therefore I encourage you to download again.

  • Install Oracle 10g on Suse Linux Enterprise Server 10

    Will 10g install on Suse Linux Enterprise Server 10? If so, what setting do I need to change to get it to install?

    Yes, it will install. Oracle supports it.Apparently they forgot to tell support. Certify still holds at SLES 9.
    http://www.oracle.com/technology/support/metalink/index.html
    It's possible to make it work. However, I usually watch http://www.novell.com/products/server/oracle/matrix.html for info.

  • How to install Oracle 10g on to Red Hat Linux 5 Server

    I'm new to both Linux and Oracle. I've been working on an installion of Oracle 10g on a Red Hat Linux 5 Server for about 2 weeks. I've been doing a lot of reading about installing Oracle on a Linux environment. I finally got to the installation portion and the Oracle Installer displayed a message that I had to have Red Hat 4 or 4 Enterprise to continue.
    How can Install Oracle 10g onto a Red Hat 5 Linux Server"? Is there an option that I can use to bypass the OS checking?
    Thanks

    Unfortunately there is no way to access metalink without a valid account. You could then just try to skip preinstall requisites with this clause:
    ./runInstaller -ignoreSysPrereqs
    or this method:
    Copy the oraparam.ini from the installation source install/oraparam.ini to /tmp directory.
    Edit the file /tmp/oraparam.ini so this file reads:
    After
    [Certified Versions]
    Linux=redhat-3,SuSE-9,redhat-4,UnitedLinux-1.0,asianux-1,asianux-2,redhat-5
    also, make sure you have these packages installed:
    # rpm -ivh gcc-c++-4.1.1-52.el5.i386.rpm gcc-4.1.1-52.el5.i386.rpm
    libstdc++-devel-4.1.1-52.el5.i386.rpm glibc-devel-2.5-12.i386.rpm
    glibc-headers-2.5-12.i386.rpm libgomp-4.1.1-52.el5.i386.rpm
    libXp-1.0.0-8.i386.rpm compat-libstdc++-296-2.96-138.i386.rpm
    compat-libstdc++-33-3.2.3-61.i386.rpm
    ~ Madrid.

  • How to Install Oracle 10g in SLES 10 32 bit

    Hello Guys,
    I was intalling oracle 10g in SUSE LInux Enterprise Server 10, but i always have an error..
    Is there someone who can have and give a manual on how to install oracle 10g in SLES10? ANd some linux shell scripting
    manual..?

    Hi,
    have a look at:
    http://www.oratoolkit.ch/knowledge/howto/installation/otn.php
    you will find there your SLES and Oracle specific installation guide. With korn shell script you will be able to install Oracle within 60 minutes.
    Good luck!
    Cheers,
    David
    OCP 9i / 10g / 11g

  • Error when Installing Oracle XE on Suse Linux 10.0

    I am installing Oracle xe on Suse Linux 10.0.
    I get following error.
    [email protected]:~/oraclexe> rpm -ivh oracle-xe-10.2.0.1-0.1.i386.rpm
    error: cannot get exclusive lock on /var/lib/rpm/Packages
    error: cannot open Packages index using db3 - Operation not permitted (1)
    error: cannot open Packages database in /var/lib/rpm
    Please help
    George

    I found another thread in this forum where you can look up how to extend your swap space (look at the bottom of that thread):
    re:Out of swap space during 9iAS install.
    I am very new to Linux, I am very much disappointed,
    I installed Linux with lots of hopes that I can
    Install Oracle tools easily on Linux and work
    comfortably. Now If I cannot intall a small database
    Oracle XE, even with 1GB Ram and 25GB harddrive on
    Linux, I don't realize why people run for Linux.
    I could Oracle XE on windows on a machine with 512
    mb ram in 4 minutes.Maybe you should take into consideration that you are not so "new" to windows and that each new system has a learning curve.
    Someone please help.. in detail. How to resize the
    swap partition at this point.Look in the provided link.
    I have very limitted or no knowldge in Linux.Maybe you should change that or stay with what you know. I don't see any other way ...
    As a sidenote, each command under Linux does have a so called "man" page (from manual). You also need to open a shell to access those commands as shown in the thread.
    And please, take a look at the commands in that thread before you start implementing, since for example the dd command seems only to create a file with a size of 512M.
    Knowing how to use a search engine would also be a valuable asset in your current position.
    C.

  • Installing Oracle 10g in Enterprise Linux 4

    Hi friends,
    I dont know how to install oracle 10g express edition in Enterprise linux 4.
    Am new to linux environment.
    And i have downloaded the rpm file from oracle website.
    Please help me...
    thanks in advance....

    Hi Sunil
    Please find the below link
    http://www.oracle.com/technology/pub/articles/smiley_10gdb_install.html
    you can install by these steps.
    Regards
    Khan

  • This problem appears while installing oracle 10g on enterprise linux

    Hi All,
    While installing oracle 10g on enterprise linux 5 this message apear:
    http://img134.imageshack.us/my.php?image=problemqy2.png
    More Info:
    Oracle 10g supports redhat 4 and Enterprise Linux is redhat 5 so I changed the redhat-release to 4 to countinue setup but the above error appears, also I tried this configuration on SuSE 10 I changed the SuSE-release to 9 and went good.

    The packeges are already installedIf you execute runInstaller again is the error message the same as before?
    If yes can you post output for this command?
    rpm -qa --qf '%{name}-%{version}-%{release}.%{arch}\n'|grep -i 'libxp'

  • Error While Installing ORACLE 10g in Redhat Linux 5.0

    Hi all,
    Anybody please guide me regarding the posted error.
    I'm trying to install ORACLE 10g in Redhat Linux 5.0 and finding error as "Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2009-10-15_09-20-56PM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
    at java.lang.ClassLoader$NativeLibrary.load(Native Method)
    at java.lang.ClassLoader.loadLibrary0(Unknown Source)
    at java.lang.ClassLoader.loadLibrary(Unknown Source)
    at java.lang.Runtime.loadLibrary0(Unknown Source)
    at java.lang.System.loadLibrary(Unknown Source)
    at sun.security.action.LoadLibraryAction.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
    at sun.awt.DebugHelper.<clinit>(Unknown Source)
    at java.awt.Component.<clinit>(Unknown Source)
    I tired a lot to sort it out but unable to resolve.So please tell me the possible ways.
    I appreciate all types of clarifications...
    Thanks in Advance
    Sajeev George

    Sajeevcmc wrote:
    Hi,
    Thanks for the reply.
    Could you please tell me the rpm full name and where i can download the same?
    Thanks in Advance
    SAJEEV GEORGEYou need to have the following packages installed already before starting Oracle installation
    http://download.oracle.com/docs/cd/B19306_01/install.102/b15669/pre_install.htm#sthref80
    binutils-2.15.92.0.2-10.EL4
    compat-db-4.1.25-9
    control-center-2.8.0-12
    gcc-3.4.3-9.EL4
    gcc-c++-3.4.3-9.EL4
    glibc-2.3.4-2
    glibc-common-2.3.4-2
    gnome-libs-1.4.1.2.90-44.1
    libstdc++-3.4.3-9.EL4
    libstdc++-devel-3.4.3-9.EL4
    make-3.80-5
    pdksh-5.2.14-30
    sysstat-5.0.5-1
    xscreensaver-4.18-5.rhel4.2
    And from the following link, you can get the same list:
    http://www.puschitz.com/InstallingOracle10g.shtml (Go to Checking Software Packages (RPMs))
    And from my installation guide you can easily install Oracle on Linux by following step by step instruction
    [Step by Step Installing Oracle Database 10g Release 2 on Linux (CentOS) and AUTOMATE the installation using Linux Shell Script|http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/]

  • Can you install Oracle 10g on REDHAT LINUX ENTERPRISE WS?

    According to oracle documentation, it says you can install oracle10g on Redhat enterprise version 3 or 4, but it doesn't specify whether its Red Hat Enterprise Linux AS or WS. Can you install oracle 10g on Rehat Linux Enterprise WS?

    Oracle Certificaction Matrices says only RedHat AS/ES is supported for database. AFAIK WS means workstation.
    Also this link is very clear: http://kbase.redhat.com/faq/FAQ_61_1135.shtm
    Besides the above sentences... If the WS installation is providing all required packages (listed in installtion prerequisites) I belive that Oracle DB could be installed on WS but as I (and the above link) said it is not officialy supported.

  • How to install Oracle 10g release 2 on rhel4 release 2

    I want to know How to install Oracle 10g release 2 on rhel4 release 2 from scratch from the partitioning of the disk in rhel 4 till the post installation .
    System Configuration
    x86 32 bit
    Pentium(R) 4 CPU 3 ghz
    RAM 1 GB 2.99Ghz
    Oracle 10g release 2
    rhel 4 release 2
    Please reply me soon.
    With Regards
    Suvin Prathab
    www.sceneworks.co.cc

    Dear Suvin Prathab!
    Please have a look at this:
    [http://www.oracle.com/technology/pub/articles/smiley_10gdb_install.html]
    Yours sincerely
    Florian W.

  • HOW TO Install Oracle 10g on Linux on POWER

    Hi Linuxers,
    SAP has released the Oracle 10g Database Software for Linux running IBM's <a href="http://www.ibm.com/systems/linux/power/">POWER(TM)</a> platform in the first half of 2006. The release has come with a few headaches. SAP's Development Support receives so many of the same questions that I thought a little how to would be in order. In my first <a href="/people/patrick.hartman/blog/2006/10/17/how-do-i-install-oracle-102-on-ibm-linux-on-power">Blog</a> entry on the SAP Developer's Network, I have taken SAP Note <a href="https://service.sap.com/sap/support/notes/945315">945315</a>, <i>SAP installation with Oracle 10.2 under Linux on POWER</i>, and tried to thoroughly explain each and every point. If you plan to run, or are running, SAP on Oracle and plan to install on the IBM System p line of servers, this <a href="/people/patrick.hartman/blog/2006/10/17/how-do-i-install-oracle-102-on-ibm-linux-on-power">Blog</a> entry should help you.
    Regards,
    Trick

    Hi,
    I think you can forget it. Oracle 10g R2 was the last version supported on Linux PowerPC.
    Cheers,
    David
    OCP 9i
    http://www.oratoolkit.ch/knowledge/howto/installation/otn.php

  • How to install Oracle 10g into Linux

    Hi All,
    I am a dummy user, this is my first time trying to install the Oracle. I need to install Oracle 10g into my company server, but I ran into issues. I am not sure which package I should download in order to install in my Linux server. Appreciate your advice.
    I ran into this error
    [[email protected] database]# ./runInstaller
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
    Failed <<<<
    Exiting Oracle Universal Installer, log for this session can be found at /tmp/OraInstall2009-03-22_06-23-34PM/installActions2009-03-22_06-23-34PM.log
    I tried to download
    1) 10201_database_linux_x86_64.cpio
    2) 10201_database_linux32.zip
    I am running on Linux localhost 2.6.18-8.el5 #1 SMP Fri Jan 26 14:15:14 EST 2007 x86_64 x86_64 x86_64 GNU/Linux
    Linux version 2.6.18-8.el5 ([email protected]) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-52)) #1 SMP Fri Jan 26 14:15:14 EST 2007
    Red Hat Enterprise Linux Server release 5 (Tikanga)

    Thanks Laura, tried the first one and it works. But I guess I am stuck again with the following error. Do I need to access to the server directly? Currently I am just connecting to the server via the VPN connection.
    [[email protected] database]$ ./runInstaller -ignoreSysPrereqs
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
    Failed <<<<
    Ignoring required pre-requisite failures. Continuing...Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-03-22_07-11-16PM. Please wait ...
    DISPLAY not set. Please set the DISPLAY and try again.
    Depending on the Unix Shell, you can use one of the following commands as examples to set the DISPLAY environment variable:
    - For csh: % setenv DISPLAY 192.168.1.128:0.0
    - For sh, ksh and bash: $ DISPLAY=192.168.1.128:0.0; export DISPLAY
    Use the following command to see what shell is being used:
    echo $SHELL
    Use the following command to view the current DISPLAY environment variable setting:
    echo $DISPLAY
    - Make sure that client users are authorized to connect to the X Server.
    To enable client users to access the X Server, open an xterm, dtterm or xconsole as the user that started the session and type the following command:
    % xhost +
    To test that the DISPLAY environment variable is set correctly, run a X11 based program that comes with the native operating system such as 'xclock':
    % <full path to xclock.. see below>
    If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance.
    Typical path for xclock: /usr/X11R6/bin/xclock
    [[email protected] database]$ echo $SHELL
    /bin/bash

  • How to install Oracle 10g with its grid functionality on Linux?

    Well, I thought changing the subject line might help to convey the meaning of what I want better. Here's my earlier post from a few hours earlier.
    Hi,
    I need carry out TPC-C benchmarking test for Oracle 10g (using one, two and four servers; basically using the grid in case of multiple servers). I have installed oracle 10g (with default options) on all the four servers, but beyond that I have no idea as to how can I invoke the grid option in order to carry out the tests-by my statement, I mean do I need to choose grid option while installing Oracle or is it the case that I specify the grid option in the code that I write for carrying out the tests. The OS is LInux (Scientific Linux).
    An unrelated problem-one of the servers is 64 bit while others are 32 bit, and proper versions of oracle have been installed. Neglecting the obvious fact that this will make comparisons difficult does anyone anticipate any other problem?
    Many Thanks!
    Steve
    *******************************************************************************************************

    Do you think that the installation of RAC can be done
    in a week? yes, as long as you know what you are doing and can catch the concept quickly and good at following instructions.
    Moreover, we do not have a cluster-all we
    have are four servers that are separate. Do you know
    if the name Real Application Clusters implies that
    the servers have to be in a cluster?
    The basic idea of RAC is all these hosts need to share same set of storage. The most popular such storage are SAN and NAS.
    An example of building RAC on linux
    http://www.oracle.com/technology/pub/articles/hunter_rac10gr2_iscsi.html

  • Error while Oracle 10g  Installation suse linux

    Hi,
    All i am facing issue while installing Oracle 10g release 2 on open suse.
    All test are getting passed but getting a error reltated to ip address as follows.
    INFO: Checking DetectIfDHCPAssignedIP
    This is a prerequisite condition to test whether the primary IP address of the system is DHCP-assiged or static.
    INFO: Detecting the IP.....:10.31.215.64
    INFO: Checking the network interface display name.... :eth0
    INFO: Checking the network reference name..... :eth0
    INFO: Checking the platform .......46
    INFO: Checking the LINUX vendor .... :SuSE
    INFO: Check complete. The overall result of this check is: Not executed <<<<
    Also while installing getting error as,
    Checking Network Configuration requirements ...
    Check complete. The overall result of this check is: Not executed <<<<
    Recommendation: Oracle supports installations on systems with DHCP-assigned public
    IP addresses. However, the primary network interface on the system should be
    configured with a static IP address in order for the Oracle Software to function
    properly. See the Installation Guide for more details on installing the software
    on systems configured with DHCP.
    Please help me to resolve issue.
    BR,
    Rajesh
    Edited by: Rajesh.Rathod on Dec 20, 2010 12:52 AM

    Hi,
    I tried to follow each step of oracle documentation but network configuration requirement is failing.
    please find following log.
    Checking operating system requirements ...
    Expected result: One of redhat-3,redhat-4,SuSE-9
    Actual Result: SuSE-9
    Check complete. The overall result of this check is: Passed
    =======================================================================
    Checking operating system package requirements ...
    Checking for make-3.79; found make-3.81-128.14.     Passed
    Checking for binutils-2.14; found binutils-2.19.51-10.26.4.     Passed
    Checking for gcc-3.2; found gcc-4.4-4.2.     Passed
    Checking for libaio-0.3.96; found libaio-0.3.104-144.2.     Passed
    Check complete. The overall result of this check is: Passed
    =======================================================================
    Checking kernel parameters
    Checking for semmsl=250; found semmsl=1250.     Passed
    Checking for semmns=32000; found semmns=32000.     Passed
    Checking for semopm=100; found semopm=100.     Passed
    Checking for semmni=128; found semmni=256.     Passed
    Checking for shmmax=536870912; found shmmax=3294967296.     Passed
    Checking for shmmni=4096; found shmmni=4096.     Passed
    Checking for shmall=2097152; found shmall=2097152.     Passed
    Checking for file-max=65536; found file-max=131072.     Passed
    Checking for VERSION=2.6.5-7.201; found VERSION=2.6.31.5-0.1-desktop.     Passed
    Checking for ip_local_port_range=1024 - 65000; found ip_local_port_range=1024 - 65000.     Passed
    Checking for rmem_default=262144; found rmem_default=4194304.     Passed
    Checking for rmem_max=262144; found rmem_max=4194304.     Passed
    Checking for wmem_default=262144; found wmem_default=262144.     Passed
    Checking for wmem_max=262144; found wmem_max=262144.     Passed
    Check complete. The overall result of this check is: Passed
    =======================================================================
    Checking Recommended glibc version
    Expected result: ATLEAST=2.3.3-98.28
    Actual Result: 2.10.1-10.4
    Check complete. The overall result of this check is: Passed
    =======================================================================
    Checking physical memory requirements ...
    Expected result: 922MB
    Actual Result: 5460MB
    Check complete. The overall result of this check is: Passed
    =======================================================================
    Checking available swap space requirements ...
    Expected result: 5460MB
    Actual Result: 10244MB
    Check complete. The overall result of this check is: Passed
    =======================================================================
    Checking Network Configuration requirements ...
    Actual Result: :java.lang.NullPointerException:Exception/Error Occurred
    Check complete. The overall result of this check is: Not executed <<<<
    Recommendation: Oracle supports installations on systems with DHCP-assigned public IP addresses. However, the primary network interface on the system should be configured with a static IP address in order for the Oracle Software to function properly. See the Installation Guide for more details on installing the software on systems configured with DHCP.
    =======================================================================
    Validating ORACLE_BASE location (if set) ...
    Check complete. The overall result of this check is: Passed
    =======================================================================
    Checking Oracle Home path for spaces...
    Check complete. The overall result of this check is: Passed
    =======================================================================
    Checking for proper system clean-up....
    Check complete. The overall result of this check is: Passed
    =======================================================================
    Checking for Oracle Home incompatibilities ....
    Actual Result: NEW_HOME
    Check complete. The overall result of this check is: Passed
    =======================================================================
    Checking Network Configuration requirements ...
    Actual Result: :java.lang.NullPointerException:Exception/Error Occurred
    Check complete. The overall result of this check is: Not executed <<<<
    Recommendation: Oracle supports installations on systems with DHCP-assigned public IP addresses. However, the primary network interface on the system should be configured with a static IP address in order for the Oracle Software to function properly. See the Installation Guide for more details on installing the software on systems configured with DHCP.
    =======================================================================
    Please suggest how to resolve.

Maybe you are looking for