How to install Oracle 10g release 2 on rhel4 release 2

I want to know How to install Oracle 10g release 2 on rhel4 release 2 from scratch from the partitioning of the disk in rhel 4 till the post installation .
System Configuration
x86 32 bit
Pentium(R) 4 CPU 3 ghz
RAM 1 GB 2.99Ghz
Oracle 10g release 2
rhel 4 release 2
Please reply me soon.
With Regards
Suvin Prathab
www.sceneworks.co.cc

Dear Suvin Prathab!
Please have a look at this:
[http://www.oracle.com/technology/pub/articles/smiley_10gdb_install.html]
Yours sincerely
Florian W.

Similar Messages

  • How to install oracle 9i database on rhel4

    Hi,
    i am new to database and i have to install oracle database 9i on RHEL4.
    can anybody give me the detail steps to do this.
    Thanks in advance

    Duplicate post!
    Re: how to install oracle 9i database on rhel4
    Refer to this address:
    http://tinyurl.com/qmgk5v
    Kamran Agayev A. (10g OCP)
    http://kamranagayev.wordpress.com
    [Step by Step install Oracle on Linux and Automate the installation using Shell Script |http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/]

  • How to install Oracle 10g on to Red Hat Linux 5 Server

    I'm new to both Linux and Oracle. I've been working on an installion of Oracle 10g on a Red Hat Linux 5 Server for about 2 weeks. I've been doing a lot of reading about installing Oracle on a Linux environment. I finally got to the installation portion and the Oracle Installer displayed a message that I had to have Red Hat 4 or 4 Enterprise to continue.
    How can Install Oracle 10g onto a Red Hat 5 Linux Server"? Is there an option that I can use to bypass the OS checking?
    Thanks

    Unfortunately there is no way to access metalink without a valid account. You could then just try to skip preinstall requisites with this clause:
    ./runInstaller -ignoreSysPrereqs
    or this method:
    Copy the oraparam.ini from the installation source install/oraparam.ini to /tmp directory.
    Edit the file /tmp/oraparam.ini so this file reads:
    After
    [Certified Versions]
    Linux=redhat-3,SuSE-9,redhat-4,UnitedLinux-1.0,asianux-1,asianux-2,redhat-5
    also, make sure you have these packages installed:
    # rpm -ivh gcc-c++-4.1.1-52.el5.i386.rpm gcc-4.1.1-52.el5.i386.rpm
    libstdc++-devel-4.1.1-52.el5.i386.rpm glibc-devel-2.5-12.i386.rpm
    glibc-headers-2.5-12.i386.rpm libgomp-4.1.1-52.el5.i386.rpm
    libXp-1.0.0-8.i386.rpm compat-libstdc++-296-2.96-138.i386.rpm
    compat-libstdc++-33-3.2.3-61.i386.rpm
    ~ Madrid.

  • How to Install Oracle 10g in SLES 10 32 bit

    Hello Guys,
    I was intalling oracle 10g in SUSE LInux Enterprise Server 10, but i always have an error..
    Is there someone who can have and give a manual on how to install oracle 10g in SLES10? ANd some linux shell scripting
    manual..?

    Hi,
    have a look at:
    http://www.oratoolkit.ch/knowledge/howto/installation/otn.php
    you will find there your SLES and Oracle specific installation guide. With korn shell script you will be able to install Oracle within 60 minutes.
    Good luck!
    Cheers,
    David
    OCP 9i / 10g / 11g

  • How to Install Oracle 10g in Windows 7 Home premium 64bit operating system

    Hi,
    I am using Windows 7 Home premium 64bit operating system. While i was installing oracle 10g i got error and not able to install. How to install the Oracle 10g databse on this operating system. Is there any patch to install this or i have to use other version of oracle with window 7 operating system?
    Thanks in advance
    Mayank Adhikari

    The argument would be who wants to install Oracle database on Windows 7. I think most probably by the developers who wants to "Try" something prior deal with a production database, right?
    For a developer, installing database using the hack is more than NOT having a local database running from the local system. I installed all the products mentioned with windows7bugs post and used the following tools to successfully connect and retrive data from the database instances.
    Toad 9.7.x.x
    SQL Developer
    SQL/Plus
    Developer 6i (Another hack, please check this link http://windows7bugs.wordpress.com/2010/03/01/installing-oracle-developer-forms-reports-6i-on-windows-7-64bit/).
    I think the discussion about whether all the features of client/server are still available with such a hacked installation is meaningless as far the information requested was strictly for Windows 7, not for a Server OS.
    regards,

  • How To Install oracle 10g

    Hello,
    I'm new to Oracle. I want to install oracle 10g (10.2.4.0 ) in windows server 2008. I want to know how should it install when we have set domain control. previously i have installed it and after that i add domain. But this time i'm going to install it after add the domain control.
    i tried this 1s. it's giving an error
    ORA-12560: TNS:protocol adapter error
    Thanks
    wbr

    831585 wrote:
    Hello,
    I'm new to Oracle. I want to install oracle 10g (10.2.4.0 ) in windows server 2008. I want to know how should it install when we have set domain control. previously i have installed it and after that i add domain. But this time i'm going to install it after add the domain control.
    i tried this 1s. it's giving an error
    ORA-12560: TNS:protocol adapter error
    Thanks
    wbrDo you get this error when running installation?
    If you get it after installation, then refer to the following blog article:
    http://arjudba.blogspot.com/2008/08/ora-12560-tnsprotocol-adapter-error-on.html
    Kamran Agayev A.
    Oracle ACE
    My Oracle Video Tutorials - http://kamranagayev.wordpress.com/oracle-video-tutorials/

  • How to Install oracle 10g and 11g on aix 6.1

    Can we install oracle 10g and 11g Enterprise Editions on IBM aix 6.1 ? If so how
    Chetan
    Edited by: chetan0926 on Jan 11, 2012 2:56 AM

    Hi;
    Can we install oracle 10g and 11g Enterprise Editions on IBM aix 6.1 ? If so how Yes you can,both version is certified
    I agree Sybrand, Please check installation guide. All your questions will be answered in it
    http://www.oracle.com/pls/db102/homepage
    http://www.oracle.com/pls/db112/homepage
    Also see:
    Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
    Regard
    Helios

  • How to install Oracle 10g into Linux

    Hi All,
    I am a dummy user, this is my first time trying to install the Oracle. I need to install Oracle 10g into my company server, but I ran into issues. I am not sure which package I should download in order to install in my Linux server. Appreciate your advice.
    I ran into this error
    [root@localhost database]# ./runInstaller
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
    Failed <<<<
    Exiting Oracle Universal Installer, log for this session can be found at /tmp/OraInstall2009-03-22_06-23-34PM/installActions2009-03-22_06-23-34PM.log
    I tried to download
    1) 10201_database_linux_x86_64.cpio
    2) 10201_database_linux32.zip
    I am running on Linux localhost 2.6.18-8.el5 #1 SMP Fri Jan 26 14:15:14 EST 2007 x86_64 x86_64 x86_64 GNU/Linux
    Linux version 2.6.18-8.el5 ([email protected]) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-52)) #1 SMP Fri Jan 26 14:15:14 EST 2007
    Red Hat Enterprise Linux Server release 5 (Tikanga)

    Thanks Laura, tried the first one and it works. But I guess I am stuck again with the following error. Do I need to access to the server directly? Currently I am just connecting to the server via the VPN connection.
    [oracle@localhost database]$ ./runInstaller -ignoreSysPrereqs
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
    Failed <<<<
    Ignoring required pre-requisite failures. Continuing...Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-03-22_07-11-16PM. Please wait ...
    DISPLAY not set. Please set the DISPLAY and try again.
    Depending on the Unix Shell, you can use one of the following commands as examples to set the DISPLAY environment variable:
    - For csh: % setenv DISPLAY 192.168.1.128:0.0
    - For sh, ksh and bash: $ DISPLAY=192.168.1.128:0.0; export DISPLAY
    Use the following command to see what shell is being used:
    echo $SHELL
    Use the following command to view the current DISPLAY environment variable setting:
    echo $DISPLAY
    - Make sure that client users are authorized to connect to the X Server.
    To enable client users to access the X Server, open an xterm, dtterm or xconsole as the user that started the session and type the following command:
    % xhost +
    To test that the DISPLAY environment variable is set correctly, run a X11 based program that comes with the native operating system such as 'xclock':
    % <full path to xclock.. see below>
    If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance.
    Typical path for xclock: /usr/X11R6/bin/xclock
    [oracle@localhost database]$ echo $SHELL
    /bin/bash

  • How to install Oracle 10g with its grid functionality on Linux?

    Well, I thought changing the subject line might help to convey the meaning of what I want better. Here's my earlier post from a few hours earlier.
    Hi,
    I need carry out TPC-C benchmarking test for Oracle 10g (using one, two and four servers; basically using the grid in case of multiple servers). I have installed oracle 10g (with default options) on all the four servers, but beyond that I have no idea as to how can I invoke the grid option in order to carry out the tests-by my statement, I mean do I need to choose grid option while installing Oracle or is it the case that I specify the grid option in the code that I write for carrying out the tests. The OS is LInux (Scientific Linux).
    An unrelated problem-one of the servers is 64 bit while others are 32 bit, and proper versions of oracle have been installed. Neglecting the obvious fact that this will make comparisons difficult does anyone anticipate any other problem?
    Many Thanks!
    Steve
    *******************************************************************************************************

    Do you think that the installation of RAC can be done
    in a week? yes, as long as you know what you are doing and can catch the concept quickly and good at following instructions.
    Moreover, we do not have a cluster-all we
    have are four servers that are separate. Do you know
    if the name Real Application Clusters implies that
    the servers have to be in a cluster?
    The basic idea of RAC is all these hosts need to share same set of storage. The most popular such storage are SAN and NAS.
    An example of building RAC on linux
    http://www.oracle.com/technology/pub/articles/hunter_rac10gr2_iscsi.html

  • How to install Oracle 10g ODBC driver  for win 64 bit?

    I need to install Oracle 10g ODBC driver for win 64 bit, I donot know how to do that,
    where to find the driver....
    The driver 10.1.0.5.0 25-Apr-2006 2.1 MB isnot for 64 bits Win server 2003.

    Dear Sir,
    Yes, you can find the Driver here
    http://www.oracle.com/technology/software/tech/windows/odbc/index.html

  • How to Install oracle 10g in a gues OS?

    Hello All,
    I have installed Oracle Linus 5 using the template.
    Since Oracle Linux Template does not have the X server, how would one install Oracle 10g using GUI.
    Should i go for the 'un attended' installation ?
    Also, can i use the same 10201_database_linux32.zip bundle that i use for RH4 ?
    But the inside oraparam.ini, it does not 've any details about the oracle linux( only Linux=redhat-3,SuSE-9,redhat-4,UnitedLinux-1.0,asianux-1,asianux-2)
    TIA,
    JJ

    I would recommend downloading the Oracle 10g template for Oracle VM from eDelivery. This automatically installs and configures Oracle 10g for you. This is a much simpler configuration path, as the OS and Oracle are pre-configured to work under Oracle VM. There are plenty of [Oracle VM Templates|http://www.oracle.com/technology/products/vm/templates.html] to chose from!
    Otherwise, I would recommend downloading and installing Oracle 10g 10.2.0.4 which includes support for installing on Oracle Enterprise Linux. You can install 10.2.0.1, but you would need to tweak some files first to fool the installer into thinking you're running on Red Hat Enterprise Linux.

  • How to install oracle 10g in Solaris10 Container

    I'd like to install oracle 10g in local zone of Solaris 10.
    But I don't know how to set "set noexec_user_stack=1".
    Now before install oracle 10g.
    I created /etc/system file in local zone.
    The file content is only "set noexec_user_stack=1".
    And I performed "set noexec_user_stack=1" command as root.
    Do I need to include "set noexec_user_stack=1" in /etc/system file in global zone?
    Please advice.

    did you check this?
    Installing OCS 10g R1 on Solaris 10

  • How to install oracle 10g on suse linux

    Hi,
    can anybody let me kbow how to install oracle 10.2 on suse linux.....
    i have installed suse linux but couldn;t able to install oracle 10g on the same....
    looking for gud suggestion.....

    These two are good to start with
    Installing Oracle Database 10g on SUSE Linux Enterprise Server 9 and on SUSE Linux Professional 9.1, 9.2, and 9.3
    http://www.puschitz.com/InstallingOracle10gOnSUSE.shtml
    Oracle Products on SUSE Linux Enterprise: Documents
    http://www.novell.com/products/server/oracle/documents.html

  • How to install Oracle 10g on Solaris 10 non-global zone.

    Hi,
    I want to install Oracle 10g on Solaris non global zone with ASM.
    I need complete doc for doing the same.
    REgards
    S.Ali

    Check Oracle® Database Installation Guide 10g Release 2 (10.2) for Solaris Operating System.

  • How to install oracle 10g 10.2.0.1.0 to centOS

    Dear sir/madam
    I am trying to install oracle 10g 10.2.0.1.0 to centOS.
    After configuring Linux (centOS), I try to run ./runInstaller it give me am error as following
    正在檢查安裝程式需求...
    檢查作業系統版本: 必須是 redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
    失敗 <<<<
    正在結束 Oracle Universal Installer, 此階段作業的日誌在 /tmp/OraInstall2008-05-27_10-47-34PM/installActions2008-05-27_10-47-34PM.log
    Is anybody can help me?
    How is the next step should I do?
    many many thanks
    Francis SZE

    Dear All of you
    After I type in ./runInstaller -ignoreSysPrereqs , it give me an error as following
    Exception java.lang.UnsatisfiedLinkError: /tmp/OraInstall2008-05-27_11-40-00PM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory occurred..
    java.lang.UnsatisfiedLinkError: /tmp/OraInstall2008-05-27_11-40-00PM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
    at java.lang.ClassLoader$NativeLibrary.load(Native Method)
    at java.lang.ClassLoader.loadLibrary0(Unknown Source)
    at java.lang.ClassLoader.loadLibrary(Unknown Source)
    at java.lang.Runtime.loadLibrary0(Unknown Source)
    at java.lang.System.loadLibrary(Unknown Source)
    at sun.security.action.LoadLibraryAction.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
    at sun.awt.DebugHelper.<clinit>(Unknown Source)
    at java.awt.Component.<clinit>(Unknown Source)
    at oracle.sysman.oii.oiif.oiifm.OiifmGraphicInterfaceManager.<init>(OiifmGraphicInterfaceManager.java:222)
    at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.createInterfaceManager(OiicSessionInterfaceManager.java:193)
    at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.getInterfaceManager(OiicSessionInterfaceManager.java:202)
    at oracle.sysman.oii.oiic.OiicInstaller.getInterfaceManager(OiicInstaller.java:436)
    at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:926)
    at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:866)
    Exception in thread "main" java.lang.NoClassDefFoundError
    at oracle.sysman.oii.oiif.oiifm.OiifmGraphicInterfaceManager.<init>(OiifmGraphicInterfaceManager.java:222)
    at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.createInterfaceManager(OiicSessionInterfaceManager.java:193)
    at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.getInterfaceManager(OiicSessionInterfaceManager.java:202)
    at oracle.sysman.oii.oiif.oiifm.OiifmAlert.<clinit>(OiifmAlert.java:151)
    at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:984)
    at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:866)
    anybody willing to help me?
    Thanks
    Francis SZE

Maybe you are looking for

  • Email Campaigns

    Hey Guys ... I have a client that wants to use campaigns and he had 2 questions I didn't have the answer to. 1) How do the campaign reports that show campaign clicks, opens and bounces work? Is that automatically built into the emails or is there som

  • Password file and sysdba grant in 10g on AIX ...

    Hi, I am very familiar with password file, orapwd ... I installed oracle 10gR2 database on AIX, created a password file using orapwd (file name orapwdSID.ora under $ORACLE_HOME/dbs), set remote_login_passwordfile='EXCLUSIVE' in init.ora file. 1 - Whe

  • Using ICacheService in Web Dynpro DC

    Dear, My Web Dynpro DC application allows users to upload several files. Since I don't want to keep all these files continuously in memory, during the complete user session, I want to temporarily save them to disk. Therefore I'm trying to use the ICa

  • Listener shutdown with linux error 29 : ilegal seek

    Hi, everybody and some gurus I'm using VMware ESX server. I have successfully installed Oracle 10g R2 over Fedora 7. Then I made a clone of this server. After changing name and IP Oracle listener crashes with linux error : 29 : Illegal seek. After se

  • Where is the opacity slider in the color picker?

    Where has the opacity slider gone in the color picker?  It used to be underneath the color wheel. [Edited to correct spelling error.]