How to install Oracle 817 Client on Redhat Linux7.2

I try to install oracle 817 client on a dell server running Redhat Linux7.2, the installer won't start. Are there any pre-requisites I have to set for client install to work on linux? Does 817 installer work on Linux7.2?
Thanks,
Joe

Joe,
I have the same issue. It's probably due to an incompatibility of the jdk 1.1.8 on the CD.
Have you tried using another one ? http://www.blackdown.org/
Rgds,
Franck

Similar Messages

How to install Oracle 9i Client in RHEL 4.0 Upate 1

Where can I find a tep by step process of installing Oracle 9i client 9.2.0.7.0 on linux rhel 4 AS -Update 1
-SP

As Jer said. Just follow the documentation at http://tahiti.oracle.com or (better in this case) first steps from http://www.puschitz.com. I said fist steps because you need to do some workarounds to start OUI installer. Once OUI installer started then choose "Client install" opion.

How to install Oracle Database Client 32-bit libraries.

Dear All,
In the document : http://download.oracle.com/docs/cd/E10415_01/doc/bi.1013/b31765.pdf
it is written "For 64-bit Linux system installations, you must use the Oracle Database Client 32-bit libraries"
how can i install just the libraries from OUI Database 11.2
Is it must to install these libraries first, whatif I install Oracle11.2 64bit client, and then install the OBIEE. Anyhow i need to install OracleDBClient to connect to Oracle server 11.2.

You can't "just install the libraries", you need a full ORacle client installation. The Oracle client can be installed after OBIEE but you must have an Oracle client to connect to an Oracle database via OCI (which is the recomended approach). 64bit client should be fine as long as it has the 32bits libraries. The 10g client does, not sure about the 11g client. Make sure you install the FULL Oracle client, not the Instant Client. The 32bits client libraries are located under lib32, the lib directory is for the 64bits ones. You might need ot re-link them if they were linked correctly during the client installation. But for more information post a message in the Oracle client forum, this is the OBIEE forum.

How to install oracle 8 on windows xp

i use windows xp and (pentum 4 processor )
my question :-
i want to how to install oracle 8 (client) i try to do this but the installtion can't complete and there was no any error message ...
please help me and tell me step by step
thanks

ok how to install oracle 8 client on windwos 2000 pro
please help me

Oracle 817 client not available in ODBC Data Source Administrator pick list...

I have installed Oracle 817 client on a PC.
I can see the server, I can see the instance.
I can log into the instance using SQLPlus with no problem.
The product I'm using requires an ODBC connection configured in the ODBC Data Source Administrator.
When I try to configure it in the DSA, Oracle 8 is not in the list.
HELP!

I assume you have Windows on the client. The "Drivers" page of the ODBC_DSA should list all installed drivers. You require:
name= Oracle ODBC Driver
version= 8.01.07.00 (or something similar)
company= Oracle Corporation DO NOT USE the Microsoft one.
If this does not show, then either it was not included in the Oracle Client installation or you have not rebooted after the Oracle Client installation; the ODBC driver is not visible until rebooted.

How to install Oracle 9i on redhat 9

i have installed 4-5 times oracle 9i on linux ...but the thing is ..as soon i restart my pc..the SQLPLUS doest not start from the redhat 9 terminal
...So plz tell me the step by step procedure how to install Oracle 9i on linux ...
.... What & where is .bash_profile file is located ...???
How to create system shareable memory ...??? without this SQLPLUS is not starting ...
how to modify the kernel variables ..???
..

What & where is .bash_profile file is located ...???The file exists under oracle home directory.
# ls -l /home/oracle/.bash_profile
-rw-r--r-- 1 oracle dba 328 11? 2 15:35 /home/oracle/.bash_profile
How to create system shareable memory ? without this SQLPLUS is not starting.Append your shareable memory parameters to /etc/sysctl.conf, You might want to change these values if you have more RAM:
kernel.shmmax = 536870912
kernel.shmmni = 4096
kernel.shmall = 2097152
REBOOT the system so the kernel changes can take effect, or if rebooting is not an option, you can change the kernel params at runtime by issuing:
# echo 536870912 > /proc/sys/kernel/shmmax
# echo 4096 > /proc/sys/kernel/shmmni
# echo 2097152 > /proc/sys/kernel/shmall
how to modify the kernel variables ..???method 1:
To modify kernel parameters a common way is to change /proc file system:
1. Log in as root user.
2. Change to the /proc/sys/kernel directory.
3. echo <desired list of values> > <group of parameters>
But this update is not permanent and after system reboot, your kernel parameters's
values will be the same as before.
method 2:
setuping permanently kernel parameter values ,is to use '/etc/sysctl.conf' file.
Every time the system boots, the '/etc/rc.d/rc.sysinit' script is executed
by init process. This shell script contains a call to sysctl command and
reads the values from /etc/sysctl.conf file as the ones to be set Therefore, any values added to /etc/sysctl.conf will take effect after the system boot or without downtime using "sysctl -p" command

How to install oracle client on pentium 4

please can someone tell me how to install oracle client 8i on pentium 4 system. the installation is not going automaticlly , and if i explore the cd and press on the setup file the installing didnt start.

8i definitely has problems with Pentium IV processors. The fix is to copy the entire CD to the hard drive and then rename each copy of symcjit.dll to symcjit.old.

Installing oracle 817 on redhat 7.1

Could someone please help me? I'm trying to install oracle 817
on redhat 7.1 i did all the prework and also installed java
sdk1.3.1, and set my path also.
when I try to run the ./runInstaller or even the
install/linux/runInstaller, i get this error, Java runtime
environment not found e/bin/jre.............
the e at e/bin/jre had a little mark on top of it, i have no
idea what that means. I diged through some documentation and
the only reference that i found saids something about long file
name. Has anyone else came across this and what would be the
fix to this?
Thank you.
Will

Hello.
You dont need any java to install 8.1.7 in RedHat 7.1
Just make a full installation of RedHat and for running the
runInstaller export LD_ASSUME_KERNEL=2.2.5 before
I dont know if this are in the RelaseNotes of Disk1 of RedHat 7.0
or 7.1
FS

I can't install Oracle 10g Client in x86-64(Intel EM64T)

Dear All,
Recently, I tried to install the Oracle 10g client in Redhat Enterprise Linux 4.0 with x86-64 (Intel EM64T) platform. As I know,that is either Oracle 9i or Oracle 10g has been certified to Redhat AS 3.0 operating system.
How can I install Oracle 10g normally under all x86-64 platforms? Or, When does Oracle to release out the patch for all x86-64 versions?

Please reffer to Installation section.
Database Installation

Unable to install Oracle XE Client on Ubuntu 8.04 - "no such user"

Hi,
I've just installed Oracle XE client on my desktop machine (64bit Ubuntu 8.04), and I had to manually create some users and groups:
sudo groupadd nobody
sudo groupadd oinstall
sudo useradd -s /bin/bash -g oinstall -G dba oracle
sudo passwd oracle
before the install would complete, due to what appears to be incorrect arguments to useradd by the installer.
It took quite a lot of hunting to find the above, and I'm a little concerned since no one else seems to have had the same problems.
I installed using:
$ sudo dpkg -i --force-architecture oracle-xe-client_10.2.0.1-1.0_i386.deb
(the force-architecture was required for the server install on my server, so I did the same here)
I read the install instructions on the oracle pages
(http://www.oracle.com/technology/software/products/database/xe/files/install.102/b25144/toc.htm#BABFEDEI) and didn't see anything about having to manually create these accounts, and I seem to have followed the rest of the instructions correctly.
What did I do wrong? I'm probably going to have to do it again sometime, and I'm a little concerned that I might have just been causing trouble for myself by doing those extra manual steps.
Note that I had to provide a password for the oracle user; how does oracle manage to log in using this account, since I didn't have to provide it anywhere?
Any help/advice would be appreciated,
many thanks,
William
BTW I'm really not happy with the preview/post message thing in this forum; I'm using Firefox 3.0.1 and if you use preview then the back button clears the entire text (yay, thanks!); I tried to be more cunning next time, and use the back button instead, but then none of the "preview", "post message" and "cancel" buttons work... so this was my third attempt at writing this message, and it's somewhat shorter than the original, like my patience :p

BTW I'm really not happy with the preview/post
message thing in this forum; I'm using Firefox 3.0.1
and if you use preview then the back button clears
the entire text (yay, thanks!); I tried to be more
cunning next time, and use the back button instead,
but then none of the "preview", "post message" and
"cancel" buttons work...It's not Firefox related - same issue with other browsers.
Please put your entry regarding this into this thread:
Preview not working correctly - works now
That's the right place for this issue...
Cheers!

Problem installing Oracle 8.05 on Redhat Linux 7.1

I am currently trying to install Oracle 8.05 onto Redhat Linux 7.1. I can get part of the way through
the installation, however, when it is installing the rdbms portion. I stops with an error about a failure
during relinking. Here is the part of make.log which details what really happened. Could someone tell
me how to proceed.
Thank you,
Nicholas Waltham
--------------[ rdbms.ins 2618 ]---------------------------------------------
Action: Installing install.
Command: (make -f ins_rdbms.mk ORACLE_HOME=/opt/oracle/home install), Out=/opt/oracle/home/orainst/make.log, Err=/opt/oracle/home/orainst/make.log
chmod 755 /opt/oracle/home/bin
rm -f oracle exp imp sqlldr tkprof mig dbv tstshm maxmem orapwd dbfsize cursize rman genoci svrmgrl extproc ihsalloci ihsots ihsdepxa ogms ogmsctl osh sbttest /opt/oracle/home/rdbms/lib/ksms.s /opt/oracle/home/rdbms/lib/ksms.o
echo " - Linking Oracle " ;\
/opt/oracle/home/bin/echodo cc -L/opt/oracle/home/lib/ -L/opt/oracle/home/rdbms/lib -o /opt/oracle/home/rdbms/lib/oracle /opt/oracle/home/rdbms/lib/opimai.o /opt/oracle/home/rdbms/lib/ssoraed.o /opt/oracle/home/rdbms/lib/ttcsoi.o /opt/oracle/home/rdbms/lib/config.o \
-lserver -lclient -lvsn -lcommon -lgeneric \
/opt/oracle/home/rdbms/lib/defopt.o /opt/oracle/home/lib/ncrstab.o -lknlopt \
-lslax -lplsf -lplsb -lextp -lserver -lclient -lvsn -lcommon -lgeneric -lknlopt \
-lslax -lplsf -lplsb -lextp -ldbicx \
/opt/oracle/home/lib/nautab.o /opt/oracle/home/lib/naeet.o /opt/oracle/home/lib/naect.o /opt/oracle/home/lib/naedhs.o `cat /opt/oracle/home/lib/naldflgs` -lnetv2 -lnttcp -lnetwork -lncr -lclient -lvsn -lcommon -lgeneric -lmm -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lnetv2 -lnttcp -lnetwork -lncr -lclient -lvsn -lcommon -lgeneric -lepc -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lclient -lvsn -lcommon -lgeneric -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 `cat /opt/oracle/home/lib/sysliblist` -ldl -lm -ldl -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lsql -lsql `cat /opt/oracle/home/rdbms/lib/nmliblist` `if ar tv /opt/oracle/home/rdbms/lib/libknlopt.a | grep "kxmnsd.o" > /dev/null 2>&1 ; then echo " " ; else echo "-lmdknl -lmdhh"; fi` \
-lkidt -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 `cat /opt/oracle/home/lib/sysliblist` -ldl -lm -ldl -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lsql -lsql ;
- Linking Oracle
cc -L/opt/oracle/home/lib/ -L/opt/oracle/home/rdbms/lib -o /opt/oracle/home/rdbms/lib/oracle /opt/oracle/home/rdbms/lib/opimai.o /opt/oracle/home/rdbms/lib/ssoraed.o /opt/oracle/home/rdbms/lib/ttcsoi.o /opt/oracle/home/rdbms/lib/config.o -lserver -lclient -lvsn -lcommon -lgeneric /opt/oracle/home/rdbms/lib/defopt.o /opt/oracle/home/lib/ncrstab.o -lknlopt -lslax -lplsf -lplsb -lextp -lserver -lclient -lvsn -lcommon -lgeneric -lknlopt -lslax -lplsf -lplsb -lextp -ldbicx /opt/oracle/home/lib/nautab.o /opt/oracle/home/lib/naeet.o /opt/oracle/home/lib/naect.o /opt/oracle/home/lib/naedhs.o -lnetv2 -lnttcp -lnetwork -lncr -lclient -lvsn -lcommon -lgeneric -lmm -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lnetv2 -lnttcp -lnetwork -lncr -lclient -lvsn -lcommon -lgeneric -lepc -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lclient -lvsn -lcommon -lgeneric -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lnsl -lm -ldl -lm -ldl -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lsql -lsql /opt/oracle/home/rdbms/lib/skgxns.o -lmdknl -lmdhh -lkidt -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lnsl -lm -ldl -lm -ldl -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lnetv2 -lnttcp -lnetwork -lncr -lsql -lsql
/opt/ora cle/home/lib//libplsf.a(spssimb.o): In function `pss_gets':
spssimb.o(.text+0x4ef): the `gets' function is dangerous and should not be used.
/opt/oracle/home/lib//libgeneric.a(skgfr.o): In function `skgfrcre':
skgfr.o(.text+0x4de): the `llseek' function may be dangerous; use `lseek64' instead.
/opt/oracle/home/lib//libserver.a(hoco.o): In function `hoconsi':
hoco.o(.text+0x104d): undefined reference to `__strtoq_internal'
/opt/oracle/home/lib//libserver.a(hoco.o): In function `hoconui':
hoco.o(.text+0x126a): undefined reference to `__strtouq_internal'
collect2: ld returned 1 exit status
make: *** [opt/oracle/home/rdbms/lib/oracle] Error 1
Status: 2
(( OIERR-SYSTEM: make -f ins_rdbms.mk ORACLE_HOME=/opt/oracle/home install ))
--------------[ rdbms.ins 2631 ]---------------------------------------------
null

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Nicholas Waltham ([email protected]):
I am currently trying to install Oracle 8.05 onto Redhat Linux 7.1. I can get part of the way through
the installation, however, when it is installing the rdbms portion. I stops with an error about a failure
during relinking. Here is the part of make.log which details what really happened. Could someone tell
me how to proceed.
Thank you,
Nicholas Waltham
--------------[ rdbms.ins 2618 ]<HR></BLOCKQUOTE>
Well ,I tried to install Oracle 8.0.5 in Debian Potato. At end I desist.
Oracle 8.0.5 works with glibc 5 and Debian Potato with glibc6 .
I guess this is your problem.
There are patches for this but i don't get
to make work.
Sorry for my english.
Cisar

How to install Oracle 10g on to Red Hat Linux 5 Server

I'm new to both Linux and Oracle. I've been working on an installion of Oracle 10g on a Red Hat Linux 5 Server for about 2 weeks. I've been doing a lot of reading about installing Oracle on a Linux environment. I finally got to the installation portion and the Oracle Installer displayed a message that I had to have Red Hat 4 or 4 Enterprise to continue.
How can Install Oracle 10g onto a Red Hat 5 Linux Server"? Is there an option that I can use to bypass the OS checking?
Thanks

Unfortunately there is no way to access metalink without a valid account. You could then just try to skip preinstall requisites with this clause:
./runInstaller -ignoreSysPrereqs
or this method:
Copy the oraparam.ini from the installation source install/oraparam.ini to /tmp directory.
Edit the file /tmp/oraparam.ini so this file reads:
After
[Certified Versions]
Linux=redhat-3,SuSE-9,redhat-4,UnitedLinux-1.0,asianux-1,asianux-2,redhat-5
also, make sure you have these packages installed:
# rpm -ivh gcc-c++-4.1.1-52.el5.i386.rpm gcc-4.1.1-52.el5.i386.rpm
libstdc++-devel-4.1.1-52.el5.i386.rpm glibc-devel-2.5-12.i386.rpm
glibc-headers-2.5-12.i386.rpm libgomp-4.1.1-52.el5.i386.rpm
libXp-1.0.0-8.i386.rpm compat-libstdc++-296-2.96-138.i386.rpm
compat-libstdc++-33-3.2.3-61.i386.rpm
~ Madrid.

Where to download Oracle 9i client for Redhat Linux?

We have our Oracle 9i database running on another UNIX machine and need to install Oracle 9i client with sqlplus to be installed on Redhat Linux. So, can someone tell me where I can download it?

Hi,
Please refer to:
http://www.oracle.com/technology/software/products/oracle9i/index.html
Best regards,
Sipingal

Problems Installing Oracle 9i Client

I got problems while I'm trying to Install Oracle 9i Client on a Windows 98 PC.
When I run Setup.exe file, nothing happens, I cant See Setup dialogs.
Somebody knows what is happening.
I appreciate some help
Best regards

This was posted by someone else sometime ago. I'm posting it again for your reference. hope this helps.
raja
You must read carefully the following steps here. If you previously installed any Oracle's products on your machine, I strongly recommend you to clean up thoroughly before install the new products.
================================================================
Uninstallation
The easiest way to remove ALL traces of Oracle software, for an 8i installation, is:
(1) Using regedit, remove the key \\HKEY_LOCAL_MACHINE\\SOFTWARE\ORACLE.
(2) Remove all the Oracle services (usually called Ora-something) from \\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services.
(3) Go to the ORACLE_HOME directory (usually C:\Oracle\Ora81). Go to the BIN directory beneath this. Rename the file OCIW32.DLL to something like OCIW32.OLD.
(4) Reboot your box.
(5) Once you have logged on again, delete the directories C:\Program Files\Oracle and C:\Oracle.
(6) Right-click on My Computer, select Properties->Environment. Edit the environmental variable PATH to remove all refernces to files in the two directories you have just deleted.
(7) Remove the Oracle folders from your Start menu.
*** Obviously, using regedit on your machine always entails risks, and I won't be held responsible if you end up trashing your system. However, the above procedure is one I have used many times with complete success. You have been warned! ;) ***
As to logging on, the "standard" Oracle accounts are:
SYS/change_on_install (SYSDBA - database owner)
SYSTEM/manager (Owns various VIEWs and utility PACKAGEs)
and (optionally):
SCOTT/tiger (Training account containing some sample tables)
If you're using PO8i on the local machine, you shouldn't need to worry about setting up NET*8 (Oracle's networking protocols)
=================================================================
Windows 95 and 98
This will remove all Oracle products, Oracle services, and Oracle registry entries from your computer.
Complete the following steps to create a Clean Machine. Backup any relevant databases before proceeding!
On Windows 95 and Windows 98:
1. Ensure you shutdown your Oracle. Right click on the Oracle Icon in the toolbar and click on the shutdown option.
2. Un-install all your Oracle products if possible. Use universal installer to do that. Ignore this step if you dont have universal installer on your machine.
3. In regedit, go to HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE.
4. Delete the ORACLE key.
5. Edit your AUTOEXEC.BAT file and remove your %ORACLE_HOME%\bin and JRE paths from the path setting.
6. From the Windows Explorer (or from the command prompt), delete the Oracle directory (Oracle Base).
7. Delete <system_drive>:\Program Files\Oracle (from the Windows NT Explorer or from the command prompt).
8. Delete Icons from <system_drive>: \Windows\Start Menu\Programs\Oracle - <HOME> and <system_drive>:\Windows\StartMenu\Programs\Oracle Installation Products. Where <HOME> is the previous HOME name.
9. Reboot your computer.
On Windows NT:
1. Ensure you are logged in as a user with Administrator privileges.
2. Stop all Oracle Services through Control Panel Services. Use universal installer to un-install your Oracle products. Ignore un-install if you dont have universal installer on your machine.
3. Using regedit (at the command prompt, type regedit), go to HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE and delete the ORACLE key.
4. Open HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services, and remove all keys under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services that begin with ORACLE.
5. Open HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EventLog\Application, and remove all keys under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EventLog\Application that begin with ORACLE.
6. Close regedit.
7. From the Control Panel, open System.
8. If JRE was installed by Oracle, remove the %ORACLE_HOME%\BIN path and the JRE path. For example, you may see a path similar to this one: C:\ORACLE\ORAxx\BIN;G: \Program Files\Oracle\jre\1.1.7\bin. Go to Start > Control Panel > System > Environment tab. Click on the system variable path and modify the path.
9. Delete Icons from <system_drive>:\Winnt\Profiles\All Users\Start Menu\Programs\Oracle - <HOME> and <system_drive>:\Winnt\Profiles\All Users\Start Menu\Programs\Oracle Installation Products. Where <HOME> is the previous HOME name.
10. Delete <system_drive>:\Program Files\Oracle (from the Windows NT Explorer or from the command prompt).
11. Reboot your computer.
12. Delete all ORACLE_BASE directories (You can find the Oracle homes listed in HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\ORACLE_HOMES).
================================================================
Doc ID:
Note:131299.1
Subject:
Oracle Installer 8.1.X Hangs on Machines with Pentium 4
Processors
Type:
ALERT
Status:
PUBLISHED
Content
Type:
TEXT/PLAIN
Creation
Date:
02-JAN-2001
Last
Revision Date:
18-APR-2001
This alert was modified 16-January-2001 by specifying specific
Oracle Universal
Installer Versions in the the Versions Affected section.
Oracle Universal Installer (OUI) for 8.1.x Hangs on Machines
with Pentium 4
Processors
~~~~~~~~~~~~~~~~~~
Versions Affected
~~~~~~~~~~~~~~~~~
Oracle 8.1.5
============
Oracle Universal Installer 1.6.0.9.0
Oracle 8.1.6
=============
Oracle Universal Installer 1.7.0.19.0
Oracle 8.1.7
==============
Oracle Universal Installer 1.7.1.9.0
Platforms Affected
~~~~~~~~~~~~~~~~~~
Any platform that uses the Intel Pentium 4 processor, with the
Sun JRE
and Symmantec JIT will encounter this problem. Windows NT,
Windows 2000
and NetWare platforms are confirmed to be affected.
Description
~~~~~~~~~~~
When installing Oracle Products with the Oracle Universal
Installer (8.1.x)
on machines that use the Sun JRE and Symmantec JIT, the
installer hangs.
Specifically for the Windows platform, the following version
of the Symmantec
JIT or earlier will encounter the failure:
Symantec Java! JustInTime Compiler Version 3.10.107 for JDK
1.2.
Details regarding this issue can be found at:
http://developer.intel.com/design/processor/future/manuals/knowni ssue.htm
How to determine if you have Symmantec Java for JDK 1.2:
1. Select the file "symcjit.dll" and right click on it.
2. Select Properties, then the Version tab.
3. Under Microsoft Windows*, the properties of the DLL are:
"Symantec Java! JustInTime Compiler Version 3.10.107 for
JDK 1.2 Copyright (C)
1996-99 Symantec Corporation Dynamic Link Library file".
DLLs older than this will also not work. "
Likelihood of Occurrence
~~~~~~~~~~~~~~~~~~~~~~~~
Any platform that uses the Intel Pentium 4 processor, with the
Sun JRE
and Symmantec JIT will encounter this problem. Windows NT,
Windows 2000 and NetWare platforms are confirmed to be
affected.
Possible Symptoms
~~~~~~~~~~~~~~~~~
The failure typically is that the affected application simply
terminates.
Workaround
~~~~~~~~~~
Not only will OUI be affected by this bug, most of the
post-install
configuration tools will also be affected. Running these
tools with "-nojit"
specified will avoid the hang, but it is not simple to specify
"-nojit" for
some of the products.
The following workaround works for the Windows operating
system:
a. Copy only the install directory from the CD to the hard
disk ,say, e:\temp.
b. Open oraparam.ini and make the following modifications
(Assuming CD
drive is f:)
* Change the "SOURCE=" line to use the full path to the CD
instead of a
relative path. (i.e., SOURCE=f:\stage\products.jar)
* Change the "JRE_LOCATION" line to use the full path to the
CD instead of a
relative path. (i.e.,
JRE_LOCATION=f:\stage\Components\oracle\swd\jre\1.1.7\1\DataFiles
\Expanded)
* Change the "OUI_LOCATION" line to use the full path to the
CD instead of a
relative path. (i.e.,
OUI_LOCATION=f:\stage\Components\oracle\swd\oui\1.6.0.9.0\1\DataF
iles\Expanded
* Change the "JRE_MEMORY_OPTIONS" line to add "-nojit" as the
first argument.
(i.e., JRE_MEMORY_OPTIONS=-nojit -ms16m -mx32m)
^^^^^^
* Other entries should remain the same
c. Launch setup.exe from the temporary location on your hard
drive (i.e.
e:\temp\install\win32\setup.exe). This will use the
modified
oraparam.ini and pick up the information from the CD since
the absolute
locations are specified.
Choose a Custom install and choose not to create a database
during the
install. This way, the Database Configuration Assistant will
not be launched
during installation.
The Net8 Configuration Assistant will still be launched, and
there is no way
to suppress it. You will need to kill the Net8 Configuration
Assistant if it
hangs due to the bug. The installation still will have been
successful, and
you can run the DBCA and NetCA after installation.
To kill NetCA if it hangs during installation:
In the "Configuration Tools" window, highlight the "Net8
Configuration
Assistant" and click "Stop". If that does not work, look for
the most recent
JRE process using the Task Manager, and kill it manually.
NOTE: the OUI
itself will also have a jre process. Be sure to kill the one
with the most
recent date, which should be the jre process being used for
Net8CA, not the
one for OUI itself.
After killing the configuration tools and continuing through
the installation
to the "End of Installation" screen, you should modify the
configuration tools
to use "-nojit", then call the appropriate tools from the
Start Menu.
Once installation is complete, each of the following files in
the ORACLE_HOME
needs to be modified:
assistants\dbca\dbassist.cl
assistants\dbma\dbmig.cl
assistants\ifa\ifa.cl
bin\elogin.cl
bin\owm.cl
ldap\oidamdin\oidadmin.cl
network\tools\netasst.cl
network\tools\netca.cl
owm\install\instelogin.cl
owm\install\instowm.cl
Edit the contents of the above files to add "-nojit" as shown
below:
Command=("C:\Program Files\Oracle\jre\1.1.7\BIN\JREW" -nojit
-classpath ....
this is the only thing you need to add --> ^^^^^^
Then, launch the necessary tools, like Net8CA and DBCA from
the Start Menu.
Patches
~~~~~~~
Currently there is not a patched installer available to deal
with this
problem, the workaround listed above must be used.
References
~~~~~~~~~~
[BUG:1507768] INSTALLER FAILS WHEN RUNNING ON NEW PENTIUM 4
(IV) PROCESSORS
[BUG:1507946] INSTALLER FAILS WHEN RUNNING ON NEW INTEL
PENTIUM 4 (IV) PROCESSORS
@[BUG:1518935] SYMCJIT.DLL DOESN'T WORK WITH THE NEW P4
PROCESSORS
Oracle
Support Services.
Copyright (c) 1995,2000 Oracle Corporation. All Rights
Reserved. Legal Notices and Terms of Use.
================================================================
The solution of making a local copy of the installation CD on
the hard disk and renameing symcjit.dll to symcjit.old does
work to allow installation of Oracle Client 8.1.7 on a Pentium 4
This function is useful and you can find two file to rename
===============================================================
Windows ME
Solution to the installation of Oraclei8.1.7 PE in Windows Millennium
Oracle does not support installing version 8.1.7 PE into
Windows Millennium.
As an unsupported workaround, you may add the following line
to the [compatibility95] section of win.ini prior to
installation:
Jrew=0x00080000
After setup is complete, Oracle will recommend a reboot.
There is one additional step necessary prior to reboot;
Oracle may add a non-standard path statement to the
autoexec.bat file. Please modify this SET PATH
statement to use short-filenames if you find a quoted
LFN string represented as part of the path. You can
confirm that the path was merged successfully into the
registry after reboot by examining the PATH variable
in the registry at
HKLM\System\CurrentControlSet\Control\SessionManager\Environment
Symptoms of a missing Oracle path statement in the registry are that Net8 Easy Config will not launch.
Please note that Oracle does not support the use of this
product in Windows ME, but have authorized these workarounds
for testing purposes only.
===============================================================
Windows XP Home Edition
Oracle 8i is not certified on windows XP. Even if yes, it must be Windows XP Professional.
You can install Oracle8i on windows XP Home Edition, try like this:
1 - Copy your Oracle CD into hard disk in your
machine. For example Copy from oracle8i CD into C:\Oracle\ ...
2 - Search the two files named Symcjit.dll on the D drive (where you have copied Oracle8i. You can found them in (example):
C:\Oracle\stage\Components\oracle.swd.jre\1.1.7.30\1
\DataFiles\Expanded\jre\win32\bin\symcjit.dll
3 - Rename this file (Example): symcjit_back.dll (make sure to find two files and rename them)
4 - Execute the Oracle setup.exe from C:\Oracle\setup.exe
===============================================================
When Oracle 8i dies on the install or the installer hangs, here is the fix for this, make sure that you have Service Pack 2 installed.
1. \JRE\1.3.1\ From Sun. (You can download java program at http://java.sun.com/products/jdk/1.1/jre/download-jre-windows.html)
2. Install the java file.
There is also a problem in the installation disk.
3. Make a copy of the Oracle 8i disk on the local hard disk.
4. Do a search for the two files called symcjit.dll and rename them for example: symcjit.old.
5. Install Oracle from the win32 directory.
================================================================
PLEASE NOTE THAT ORACLE DOESN'T SUPPORT THE USE OF THOSE PRODUCTS IN WINDOWS ME, BUT HAVE AUTHORIZED THESE WORKAROUNDS FOR TESTING PURPOSES ONLY

Installing Oracle 9i client on remote PC with out using distrib on cd-rom

Hello!
I have a such problem. I must install oracle client on a remote PC with no user assistant (with out usin cd-rom, I must use distrib from local hard drive).
When I trying to launch setup file ORACLE 9i from Hard drive I have an error abut using java.
So that I want to ask. may be some one knew ho to install Oracle 9i client from distrib which dispose on local hard drive???

Hi,
The minimum supported version for windows 7 is 10.2.0.5. Unsupported version may work, but it will create unexpected issues.
How to Install Oracle 10gR2 on MS Windows 7/Windows 2008R2 (Doc ID 1173433.1)
Thanks,
Krishna

How to install Oracle 817 Client on Redhat Linux7.2

Similar Messages

Maybe you are looking for