How to install Oracle Client 9i 32 bit at windows 7 Pro 64 bit ?

My company hava many computer are running windows xp 32 bit , and now we buy a lot of HP computer are running windows 7 Pro 64 bit . We have Oracle Client 9i 32bit for our database link ,but we have no extra bugde to buy new Oracle license for our database network , so how can I install Oracle Client 9i 32bit at windows 7 Pro 64 Bit ?

efe603fc-4926-43ae-8c83-1b5a92c66110 wrote:
My company hava many computer are running windows xp 32 bit , and now we buy a lot of HP computer are running windows 7 Pro 64 bit . We have Oracle Client 9i 32bit for our database link ,but we have no extra bugde to buy new Oracle license for our database network , so how can I install Oracle Client 9i 32bit at windows 7 Pro 64 Bit ?
Ummm .... client license?
All license questions should be addressed to Oracle. I believe what you'll find is that the license for client installation is free. What you pay to license and support is the rdbms (server) software.
But all licensing questions should be addressed directly to Oracle. A license agreement is a legal issue, and this forum will have no standing in court.

Similar Messages

How to install oracle client on pentium 4

please can someone tell me how to install oracle client 8i on pentium 4 system. the installation is not going automaticlly , and if i explore the cd and press on the setup file the installing didnt start.

8i definitely has problems with Pentium IV processors. The fix is to copy the entire CD to the hard drive and then rename each copy of symcjit.dll to symcjit.old.

RW-50004 error when installing Oracle EBS 12.1.1 on Windows 32 bit, 2003

Hi All
I am installing Oracle EBS 12.1.1 for Windows 32 bit on a Windows 2003 server, my pre-requisite checks have gone through successfully when checked by the oracle ebs installer.
However during the installation process i get RW-50004 error and the installation stops, the log file seems to have the following last entries
Mon 07/04/2011
05:05 PM
1 file(s) copied.
1 file(s) copied.
1 file(s) copied.
"afmkinit.cmd exiting with status 0"
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
Skipping Profile Phase
Skipping Apply Phase
adcvmlog.xml renamed to C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_99a4659\adcvmlog.xml.07041705
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_99a4659
adsvdlsn.cmd INSTE8_SETUP 9020
AutoConfig is exiting with status 1
RC-50014: Fatal: Execution of AutoConfig was failed
Raised by oracle.apps.ad.clone.ApplyDBTechStack
Can some one please help me on what I am missing or how can i correct this. Thank you.

adsvdlsn.cmd INSTE8_SETUP 9020Search AutoConfig log file for adsvdlsn.cmd and you should find more details about the error.
Please see if (Rapidwiz R12 Failed at 66% with error: RW-50004: Error code received when running external process. [ID 418109.1]) is applicable.
Also, please run md5sum as per (MD5 Checksums for R12.1.1 Rapid Install Media (Doc ID 802195.1)) to verify the integrity of the stage area directory.
Thanks,
Hussein

How to install oracle Forms and Report 10g in windows XP OS

How to install oracle Forms and Report 10g in windows XP OS. Already installed oracle Database 10g in my notebook.
It is working good.
please help me this issue.
please give the steps..............
Thanks
Rajeev

Hello Frank,
for development, you need to install Oracle Developer
Suite 10g. This includes Forms and Reports.this topic interests me too, because I've downloaded Developer Suite and Database (both for 10g) from Oracle website, installed them, but I couldn't connect to a database.
What should be done for me to create a database link and be able to connect locally, in my personal Desktop computer? (Not to a server)
Once it was told me here that I should download 10g Database - I did it, and installed it, but it didn't work. Later, some of my job partners said I should install them in a sequence - that is, 1st the Developer, and 2nd the Database. But it has failed too. And I don't know how to configure a database connection.
Best regards,

How to install Oracle client Version 10.2.0.4 on a Windows server 2008

Hi,
I need to install an Oracle client on a Windows Server 2008 (32-bit), how do I do that?
I want to install Oracle client version 10.2.0.4 (Instant Client Package - Basic: All files required to run OCI, OCCI, and JDBC-OCI applications).
Pls. advice, I can't find instructions for this installation on Oracle.com or anywhere else.

thx, it looks promising...
but how to run the .jar files and which one to run, both Class12.jar and ojdbc14.jar, to start the installation?
Do I need to install the java runtime environment to run the .jar files?

How to install Oracle client on UBUNTU LInux

Hi,
I want to install oracle client on ubuntu linux. Which version of oracle client works on it and is there any other tool which i can install instead of oracle client?
Regards,
RJiv.

RJiv wrote:
Hi,
I want to install oracle client on ubuntu linux. Which version of oracle client works on it All recent Oracle version support different Linux flavours
The problem is Oracle usually don't provide direct Oracle Client download except for Windows. You need to download the Server installation file and install the client piece. The download files are rather large.
and is there any other tool which i can install instead of oracle client?It depends on what you plan to do with Oracle client and why you need it.
On alternative is instance client, it has direct download for all supported platform.
http://www.oracle.com/technology/software/tech/oci/instantclient/index.html

Any docs on HOW TO INSTALL ORACLE CLIENT ON OBIEE SERVER?`

Thanks...

Generally speaking the way to installing Oracle Client does not depend directly on the product that is going to use it
If some product requires some specific Oracle Client versions or Oracle Client configurations you should find this information in the product documentation (i.e OBIEE Server) and not in Oracle Client documentation.
You can find Oracle Client documentation (named "Database Client") in the Installation sections of tahiti.oracle.com. For example for 11.2: http://www.oracle.com/pls/db112/portal.portal_db?selected=11&frame=#microsoft_windows_installation_guides.

How to install oracle client

hi,
Could any body tell that, how to change the oracle client of forms 6.0.8.26 , from 8.0.2 to 10.1.
i have installed oracle 10.1 client and forms 6.0.8.26 , now i wanted to make the oracle_home of these oracle client and forms to be same.
Any body tried this way ? i would like to know that how it can be done .
Thanks

Use the Oracle home selector to set the default home or create a user/system variable with as name ORACLE_HOME pointing to the correct path of the home.
Marcos

How to install Oracle VM Server 2.2.0 as 32-bit mode on a 64-bit machine.

Gurus,
If I am not wrong, the Oracle VM Server 2.2.0 installer for 32-bit and 64-bit are the same file.
I have AMD 64 bit machine, when I install Oracle VM Server 2.2.0, it installs as 64-bit.
However due to requirement, I want to install Oracle VM Server in 32-bit mode.
Will appreciate the steps.
Regards,
Krishna

Krishna,
Please note that the zip file from the Oracle eDelivery/Linux site contains a single Oracle VM server ISO file; this file is used for both x86 and x86-64 hardware. The Oracle VM server install routine automatically detects the hardware platform and installs the appropriate 32-bit or 64-bit Xen hypervisor. Regardless of the hardware platform, 32-bit or 64-bit, dom0 is 32-bit. Will a 32bit dom0 meet your business requirements?
Could you please let us know the business requirements re 32bit?
For details about the installation, sizing and server resource requirements please review http://itnewscast.com/chapter-4-oracle-vm-server-sizing-installation-and-updates
Respectfully,
Roddy

How to install oracle client on linux_x86_64 on red hat 5

Hi, installing the oracle client on a linux server is new to me as I have always installed the client on windows servers. I have been looking on the OTN site for just the client download but I do not see one and also I have been looking through the installion guide for the 10gr2 database on x86_64 but there is no mention of a client install just speaks to install the database software?
Is there a separate install for just the client or do I have to install the entire rdbms with no database?
Thanks in advance.

HI, I actually was following that exact document and I had downloaded from the link also to get the binaries...The problem I am running into is that when I run the installer it is after the first screen it is throwing an OUI-10203 the specified response file does not exists? It appears as though the installer thinks I am attempting to run an automated installation? Not sure why it is doing this I am clearly trying to run this interactively?
Any thoughts.

How i install oracle client with ODBC using response file method

Hi,
I have managed to create a response file using OUI. Currently, I do not know what are the methods which i can install a group of computers using this response file. Any advise
Thanks in advance.
Best regards,
Tony

Presumably, any method that allows you to remotely run code on the group of computers would allow you to do a silent install of the Oracle client and ODBC driver. I know Microsoft and various third parties sell such tools, but I'm not enough of a Windows admin to know anything about the relative benefits of the products in this category.
Justin

How to Install Oracle Data Access Components (ODAC) on Windows Server 2003?

I recently installed "32-bit Oracle Data Access Components (ODAC) with Oracle Developer Tools for Visual Studio" on my computer (Windows 7, 64bit). Everything seems fine and I can develop and run my application in Visual Studio 2010 and IIS 7.
Now, when I deploy my application to the Server, it raises error:
Exception: System.TypeInitializationException: The type initializer for 'Oracle.DataAccess.Client.OracleCommand' threw an exception. ---> Oracle.DataAccess.Client.OracleException: The provider is not compatible with the version of Oracle client
Obviously I need to install ODAC on the server, too. My server is:
- Windows 2003 32 bit R2 (I know, I know!)
- IIS 6
So. I downloaded the same installation from Oracle website (ODAC 11.2 Release 5 and Oracle Developer Tools for Visual Studio [11.2.0.3.20]) and installed it on the server. But still getting the same error.
PS: When I was installing, I chose Oracle Data Access Component for Oracle Client 11.2.0.3.20 in Oracle Universal Installer. hmmmm. Should I choose "Oracle Server" instead? Screenshot
Edited by: 1000434 on Apr 17, 2013 6:35 AM
Edited by: 1000434 on Apr 17, 2013 6:36 AM

ODP.NET, Unmanaged Driver uses unmanaged dependencies in the Oracle Client. The error you see means you have another Oracle Client installed on the Win2003 machine and ODP.NET is attempting to load the incorrect Oracle Client version, rather than the version you installed ODP.NET with.
What you need to do is direct ODP.NET where to find the correct version of its unamanaged Oracle Client dependencies. This will be generally the bin directory of your Oracle Client home that was installed with ODP.NET.
You can learn more about DllPath here:
http://docs.oracle.com/cd/E20434_01/doc/win.112/e23174/InstallODP.htm#sthref94
If you're not familiar with how to set ODP.NET settings in the Registry or .NET config files, you can read how to do that here:
http://docs.oracle.com/cd/E20434_01/doc/win.112/e23174/featConfig.htm#sthref106

How to install oracle database 11g express edition on Windows 7

Hi Guys,
i am trying to download and install Oracle database 11g express edition on windows7 and i can't seem to get it right. i did get the download but when i try to install, it keeps saying it appears to be an invalid archive.
Please help..

Action - Refer to the logs or contact OracleFinding the problem is the key. "Refer to the logs" is the only option, XE has no oracle support offerings.
Which plugin failed, and why did it fail will be important clues. There should be error messages in the log that will be helpful.
Otherwise, we don't have much help to offer. Fixing a problem means identifying the problem and performing steps to correct it, if there a fix is available.
A MOS lookup on the ins-20802 error has snippets from one installer session, this one is from an x64 install. Not x86. To paraphrase the details:
... Created a new file <drive>:<OH path>\cfgtoollogs\configToolAllCommands
SEVERE: java.io.IOException: Access is denied
...So from those symptoms, the user trying to run the installer does not have appropriate rights on that drive and/or folder. The fix for that particular problem is adding the user to the local administrators group. And rerunning the install. After running the deinstall steps to clean up the installation. As specified in the XE install guide for Windows.
http://docs.oracle.com/cd/E17781_01/install.112/e18803/toc.htm
Also note the System Requirements, it specifies a System architecture Intel x86, which is not X64. There is no X64 installer for XE on Windows. So it might work. Or it might not if your host is x64.
So if that is your particular error, verify that your user is in the local admins group. Either use the local users and groups applet (Start/Run/lusrmgr.msc) and open up the Administrators group. Click the Add button. Find your user. If your OS user is a windows domain user, be sure you have authenticated to the domain.
Try the `net ...` list of the adminis group, that should reveal whom is indeed in the local administrators group:
net localgroup administrators
Administrator
<domain>\Domain Admins ... # ??? is the host in windows domain ???
<domain>\Local Admins
<domain>\<user1>
<user2>
<user3>
echo %USERNAME%
# if relevant:
echo %USERDOMAIN%Like it also states in the Windows install guide, under Permission Required quote:
... must be a member of the Administrators group on Windows to install Oracle Database XE.

Problem installing oracle client (intel) on my new macbook pro

andrei /tmp/oraclient10> echo $ORACLE_HOME
/tmp/oraclient10/instantclient_10_2/
andrei /tmp/oraclient10> echo $DYLD_LIBRARY_PATH
/tmp/oraclient10/instantclient_10_2/
andrei /tmp/oraclient10> ls -l instantclient_10_2/
total 199984
-rw-r--r-- 1 andrei wheel 277 Mar 27 2008 BASIC_README
-rw-r--r-- 1 andrei wheel 281 Mar 27 2008 SQLPLUS_README
-r--r--r-- 1 andrei wheel 1609607 Feb 18 2008 classes12.jar
-rwxr-xr-x 1 andrei wheel 30556 Mar 27 2008 genezi
-r-xr-xr-x 1 andrei wheel 1525 Aug 30 2004 glogin.sql
-rwxr-xr-x 1 andrei wheel 21252860 Mar 7 2008 libclntsh.dylib.10.1
-rwxr-xr-x 1 andrei wheel 1638264 Mar 7 2008 libnnz10.dylib
-rwxr-xr-x 1 andrei wheel 1111964 Mar 11 2008 libocci.dylib.10.1
-rwxr-xr-x 1 andrei wheel 72626696 Mar 27 2008 libociei.dylib
-rwxr-xr-x 1 andrei wheel 103800 Feb 22 2008 libocijdbc10.dylib
-rwxr-xr-x 1 andrei wheel 103800 Feb 22 2008 libocijdbc10.jnilib
-rwxr-xr-x 1 andrei wheel 865412 Feb 21 2008 libsqlplus.dylib
-rwxr-xr-x 1 andrei wheel 1442316 Feb 21 2008 libsqlplusic.dylib
-r--r--r-- 1 andrei wheel 1555682 Feb 18 2008 ojdbc14.jar
-rwxr-xr-x 1 andrei wheel 12612 Feb 21 2008 sqlplus
andrei /tmp/oraclient10> otool -L instantclient_10_2/sqlplus
instantclient_10_2/sqlplus:
     /scratch/plebld/208/sqlplus/lib/libsqlplus.dylib (compatibility version 0.0.0, current version 0.0.0)
     /scratch/plebld/208/rdbms/lib/libclntsh.dylib.10.1 (compatibility version 0.0.0, current version 0.0.0)
     /scratch/plebld/208/network/lib/libnnz10.dylib (compatibility version 0.0.0, current version 0.0.0)
     /usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 111.0.0)
     /usr/lib/libgcc_s.1.dylib (compatibility version 1.0.0, current version 1.0.0)
andrei /tmp/oraclient10> sw_vers
ProductName:     Mac OS X
ProductVersion:     10.5.5
BuildVersion:     9F2114
andrei /tmp/oraclient10> uname -a
Darwin itsf167.itsnpt.com 9.5.1 Darwin Kernel Version 9.5.1: Fri Sep 19 16:19:24 PDT 2008; root:xnu-1228.8.30~1/RELEASE_I386 i386
andrei /tmp/oraclient10> ./instantclient_10_2/sqlplus
Bus error
andrei /tmp/oraclient10> gdb ./instantclient_10_2/sqlplus
Reading symbols for shared libraries ...... done
(gdb) r
Starting program: /private/tmp/oraclient10/instantclient_10_2/sqlplus
Reading symbols for shared libraries +++++. done
Program received signal EXC_BAD_ACCESS, Could not access memory.
Reason: KERN_PROTECTION_FAILURE at address: 0x00000000
0x014556d4 in mac_shared_library_environ_init_routine ()
(gdb) whe
#0 0x014556d4 in mac_shared_library_environ_init_routine ()
#1 0x8fe15a82 in __dyld__ZN16ImageLoaderMachO16doInitializationERKN11ImageLoader11LinkContextE ()
#2 0x8fe0e723 in __dyld__ZN11ImageLoader23recursiveInitializationERKNS_11LinkContextEj ()
#3 0x8fe0e6b5 in __dyld__ZN11ImageLoader23recursiveInitializationERKNS_11LinkContextEj ()
#4 0x8fe0e6b5 in __dyld__ZN11ImageLoader23recursiveInitializationERKNS_11LinkContextEj ()
#5 0x8fe0e809 in __dyld__ZN11ImageLoader15runInitializersERKNS_11LinkContextE ()
#6 0x8fe04102 in __dyld__ZN4dyld24initializeMainExecutableEv ()
#7 0x8fe07b5f in __dyld__ZN4dyld5_mainEPK11mach_headermiPPKcS5_S5_ ()
#8 0x8fe01872 in __dyld__ZN13dyldbootstrap5startEPK11mach_headeriPPKcl ()
#9 0x8fe01037 in __dyld__dyld_start ()
(gdb)

Yes sir,
Does anybody with following mac parameters has been able to install ora client?
ProductName:     Mac OS X
ProductVersion:     10.5.5
BuildVersion:     9F2114

How to Install Oracle 11i/E-Business Suite in Windows using cygwin

Hi,
if
You are going to use oracle EBS for learning oracle provide the free of license
you must install Oracle Apps with Vision Database
its absolutely free for learners
for further details read this blog
http://gpganapathy.blogspot.com
Find article related with Oracle 11i installation in windows XP
All rights reserved by only oracle corporation if you have any doubts related to license issues Contact oracle Corporation Directly

Hi;
Please check Hussein Sawwan greatest previous post about same topic
Oracle EBS 11.5.10.2 Installation Steps
Oracle EBS 11.5.10.2 Installation Steps
Regard
Helios

How to install Oracle Client 9i 32 bit at windows 7 Pro 64 bit ?

Similar Messages

Maybe you are looking for