How to install oracle enterprise manager for 10g release 2

I have installed oracale 10g release 2 on my pc , the first zip on http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10203vista.html
then i have downloaded the management agent 10.2.0.4 from http://www.oracle.com/technology/software/products/oem/htdocs/agentsoft.html. but i don't know its installation procedure, can anyone help me out thanx in advance for all the participants.

Hi,
After that I suggested to you to post in this forum (more suitable I think for Installation issues) I read the links that you post. In the link of Mass Agent Deployment exists this note:
Installation Instructions: Follow the instructions outlined in the instructions.txt file to successfully install the Management Agent
could you find this file and follow the instructions?
Regards,

Similar Messages

  • How to configure Oracle Enterprise Manager for ASM RAC Database ?

    Dears,,
    We have two databases (Primary & Standby), each database has two instances
    Database version: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit
    How to configure Oracle Enterprise Manager for this environment ?
    I need documentation for this please.
    Many thanks & Regards,,

    Assuming an agent is running on the servers you want to monitor,
    navigate to the Agent home page (Via setup --> Agent)
    When in the agent home page select 'Add Database'and press [Go]
    Assuming yopur database now gets recognized, select the Configure icon and enter the password for dbsnmp.
    When done, press [Ok] to return to the agent home page.
    Regards
    Rob
    http://oemgc.wordpress.com

  • How to install the Workflow Manager for 10g ?

    how to install the Workflow Manager for 10g ?
    where can I find the information ?

    Ting,
    When you install the workflow server from the 10gdb DB, it will install the workflow manager as well. Please make sure you read the Metalink note 265554.1 for known issues and tips. Make sure you give the correct information in the WFCA as mentioned in the metalink note.
    Cheers,
    Raja

  • RE: Oracle Enterprise Manager Extensibility 10g Release 4 (10.2.0.4) Guide

    Hi:
    - I have a question about the SNMP Receivelet code in this guide:
    Oracle® Enterprise Manager Extensibility
    10g Release 4 (10.2.0.4)
    Part Number B40007-01
    - Basically I copied the SNMP Receivelet code from the guide into a plug-in.
    I was able to load the plug-in without any error messages, but no alerts are raised
    when I send a trap.
    - Could someone please tell me what port the snmp receivelet listens on?
    - I tried ports: 3002, 1830, 3872 and 8002.
    - Port 3002 was obtained from emd.properties
    - Port 1830 was obtained from the OEM console
    - What condition is necessary for agent to receive SNMP traps?
    - My agent environment is:
    [oracle@blade bin]$ ./emctl status agent
    Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
    Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
    Agent Version : 10.2.0.5.0
    OMS Version : 10.2.0.1.0
    Protocol Version : 10.2.0.0.0
    Agent is Running and Ready
    [oracle@blade bin]$
    - My metadata file is:
    <?xml version="1.0"?>
    <!DOCTYPE TargetMetadata SYSTEM "../dtds/TargetMetadata.dtd">
    <TargetMetadata META_VER="1.001" TYPE="oracle_guide" >
    <Display>
    <Label NLSID="oracle_guide">Oracle CCA Application</Label>
    </Display>
    <Metric NAME="Response" TYPE="TABLE">
    <Display>
    <Label NLSID="oracle_guide_resp">Response</Label>
    </Display>
    <TableDescriptor>
    <ColumnDescriptor NAME="Status" TYPE="NUMBER">
    <Display>
    <Label NLSID="guide_SNMP_resp_status">CCA SNMP SubAgent
    Status</Label>
    </Display>
    </ColumnDescriptor>
    </TableDescriptor>
    <QueryDescriptor FETCHLET_ID="OSLineToken">
    <!--Property NAME="oratclHome" SCOPE="SYSTEMGLOBAL">oratclHome</Property-->
    <Property NAME="perlBin" SCOPE="SYSTEMGLOBAL">perlBin</Property>
    <Property NAME="scriptsDir" SCOPE="SYSTEMGLOBAL">scriptsDir</Property>
    <Property NAME="command" SCOPE="GLOBAL">
    %perlBin%/perl %scriptsDir%/osresp.pl
    </Property>
    <Property NAME="ENVEM_TARGET_NAME" SCOPE="INSTANCE">AgentAddr</Property>
    <Property NAME="startsWith" SCOPE="GLOBAL">em_result=</Property>
    <Property NAME="delimiter" SCOPE="GLOBAL">|</Property>
    </QueryDescriptor>
    </Metric>
    <Metric NAME="interfaces" TYPE="TABLE">
    <TableDescriptor>
    <ColumnDescriptor NAME="name" TYPE="STRING" IS_KEY="TRUE"/>
    <ColumnDescriptor NAME="type" TYPE="NUMBER" IS_KEY="FALSE"/>
    <ColumnDescriptor NAME="status" TYPE="NUMBER" IS_KEY="FALSE"/>
    <ColumnDescriptor NAME="configured_status" TYPE="NUMBER" IS_KEY="FALSE"/>
    </TableDescriptor>
    <PushDescriptor RECVLET_ID="SNMPTrap">
    <Property NAME="MatchEnterprise" SCOPE="GLOBAL">1.3.6.1.4.1.529</Property>
    <Property NAME="MatchGenericTrap" SCOPE="GLOBAL">6</Property>
    <Property NAME="MatchSpecificTrap" SCOPE="GLOBAL">50</Property>
    <Property NAME="MatchAgentAddr" SCOPE="INSTANCE">AgentAddr</Property>
    <Property NAME="SeverityStatusOID" SCOPE="GLOBAL">1.3.6.1.2.1.2.2.1.8</Property>
    <Property NAME="KeyNameOID" SCOPE="GLOBAL">1.3.6.1.2.1.2.2.1.31</Property>
    <Property NAME="ContextTypeOID" SCOPE="GLOBAL">1.3.6.1.2.1.2.2.1.3</Property>
    <Property NAME="ContextConfigured_statusOID" SCOPE="GLOBAL">1.3.6.1.2.1.2.2.1.7</Property>
    <Property NAME="SeverityCode" SCOPE="GLOBAL">CRITICAL</Property>
    </PushDescriptor>
    </Metric>
    <InstanceProperties>
    <InstanceProperty NAME="AgentHost" CREDENTIAL="FALSE"
    OPTIONAL="FALSE">
    <Display>
    <Label NLSID="oracle_guide_SNMP_agent_host">Hostname (SNMP Agent )
    </Label>
    </Display>
    </InstanceProperty>
    <InstanceProperty NAME="AgentAddr" CREDENTIAL="FALSE"
    OPTIONAL="FALSE">
    <Display>
    <Label NLSID="oracle_guide_SNMP_agent_addr">IP Address (SNMP Agent)
    </Label>
    </Display>
    </InstanceProperty>
    <InstanceProperty NAME="CommunityString" CREDENTIAL="TRUE"
    OPTIONAL="TRUE">
    <Display>
    <Label NLSID="oracle_guide_SNMP_community_string">SNMP Read
    Community String (Default: public)</Label>
    </Display>
    public
    </InstanceProperty>
    <InstanceProperty NAME="Timeout" CREDENTIAL="FALSE"
    OPTIONAL="TRUE">
    <Display>
    <Label NLSID="oracle_guide_SNMP_timeout">SNMP Timeout (Default: 30
    seconds)</Label>
    </Display>
    30
    </InstanceProperty>
    </InstanceProperties>
    </TargetMetadata>
    bash-3.00#
    - My collection file is:
    <!DOCTYPE TargetCollection SYSTEM "../dtds/TargetCollection.dtd">
    <TargetCollection TYPE="oracle_guide">
    <CollectionItem NAME = "Response">
    <Schedule>
    <IntervalSchedule INTERVAL = "5" TIME_UNIT = "Min"/>
    </Schedule>
    <Condition COLUMN_NAME="Status"
    CRITICAL="0"
    WARNING="NotDefined"
    OPERATOR="EQ"
    OCCURRENCES="1"
    MESSAGE="%target% is unreachable or is down."
    MESSAGE_NLSID="oracle_guide_response_status"
    CLEAR_MESSAGE="%target% is up."
    CLEAR_MESSAGE_NLSID="oracle_guide_response_status_clear"/>
    </CollectionItem>
    </TargetCollection>
    bash-3.00#
    Thanks
    John
    Edited by: user8826739 on Feb 23, 2010 7:12 AM

    Looks like this was also posted 4 messages above ... follow the anwers there.
    Please only post the question once ... reposted will not get any answers you wouldn't have gotten anyway.
    That just makes it hard for other users to follow all the information.
    Dave

  • Installing Oracle Enterprise Manager 10G on Fedora 2

    During installation Oracle Enterprise Manager on Fedora 2 I receive message, that my computer has 0 Mb RAM , and installation stops. In fact my host has 1024 Mb Ram. It seems to me, that installer can't correctly determine the value of RAM.
    How can I switch off this check, or how to provide the installer the right data?

    generally im specfiying it in c:\documents and settings\Program, but im installing it from c:\documents and settings\my documents\software.
    I got another verson of Orcle, ive downladed the developer sute 10g, in this case the college where i go to use, it to connect. so i expect i will have to really uninstll that and the instll in Oracle Enterprise 10g.
    ive got screen shots of the process i am going through, in order to get a sucessfull installation.
    If anyone has msn please come online so i can send you the screen shots of what is happening when i try and install in Orcale enterprise 10g on my pc
    my email address is
    [email protected]
    or send me an email wid the subject: Help with installing Oracle enterprise manager 10g or a hello so i know its from a forum reply

  • How to configure Oracle Enterprise manager 11.2.0.1 for ASM instance

    Hi All,
    Please let us know How to configure Oracle Enterprise manager 11.2.0.1 for ASM instance.
    Reagrds,
    Vikas

    Assuming an agent is running on the servers you want to monitor,
    navigate to the Agent home page (Via setup --> Agent)
    When in the agent home page select 'Add Database'and press [Go]
    Assuming yopur database now gets recognized, select the Configure icon and enter the password for dbsnmp.
    When done, press [Ok] to return to the agent home page.
    Regards
    Rob
    http://oemgc.wordpress.com

  • Error while installing oracle enterprise manager 11g

    Hello,
    I am trying to install Oracle enterprise manager 11g & keep on
    getting following error at install progress stage :
    Error in setting permission of file/directory
    /u01/labuser/Oracle/Middleware/oracle_common/oui/jlib/emocmul.jar
    with 3 options Retry,Ignore & cancel.
    Could anyone guide why i am getting this error & how to fix this problem ?
    Thank-You
    Rahul Shah.

    Hi;
    For your issue i suggest close your thread here as changing thread status to answered and move it to Forum Home » Enterprise Manager which you can get more quick response
    Regard
    Helios

  • Oracle Enterprise Manager for Personal Oracle 9i

    I have justdownloded Personal oracle 9i for WIN98.
    Everything was fine. But when I tried to install the Enterprise Management 2.2 (for 8i) I got an errorthat "Oracle .swd.Jrl.1.1.8.10.0 support file is missing.
    I was able to install the OEM for my Personal 8i
    How do I download the OEM for Personal Oracle 9i. I do not have room to install Enterprise Oracle 9i

    You can't use Enterprise Manager for 8i on
    Personal Oracle 9i.
    I have a question.
    I have installed Personal Oracle 8i on my PC,
    but i don't find Oracle Enterprise Manager for 8i download site on OTN. Can you healp me?

  • How to Install SQL Enterprise Manager ?

    The standard installation file which sap gives sql4sap.vbs doesnt install the Enterprise manager.
    How to install SQL Enterprise Manager (ECC6+Win2003).
    regards,
    dev

    Hi,
    Server type is normally "Database Engine". You can use the Dev. Studio to connect to various other types (e.g. Reporting Services, Analysis Service etc.)
    The Servername is the instance name you want to connect to. For a default instance it is your machinename, for a named instance it is Machinename\Instancename.
    Authentication can be Windows Authentication if you are logged on as a local Admin. For an ABAP System only Windows Authentication is possible, for a JAVA System the SQL authentication is necessary, so that you can logon as 'sa' with the password you provided in the setup.
    Regards
      Clas

  • How to install oracle Forms and Report 10g in windows XP OS

    How to install oracle Forms and Report 10g in windows XP OS. Already installed oracle Database 10g in my notebook.
    It is working good.
    please help me this issue.
    please give the steps..............
    Thanks
    Rajeev

    Hello Frank,
    for development, you need to install Oracle Developer
    Suite 10g. This includes Forms and Reports.this topic interests me too, because I've downloaded Developer Suite and Database (both for 10g) from Oracle website, installed them, but I couldn't connect to a database.
    What should be done for me to create a database link and be able to connect locally, in my personal Desktop computer? (Not to a server)
    Once it was told me here that I should download 10g Database - I did it, and installed it, but it didn't work. Later, some of my job partners said I should install them in a sequence - that is, 1st the Developer, and 2nd the Database. But it has failed too. And I don't know how to configure a database connection.
    Best regards,

  • How to start Oracle Enterprise Manager(Oracle 9i) on Sun Solaris 9 platform

    Hi
    How to start Oracle Enterprise Manager(Oracle 9i) on Sun Solaris 9 platform and Oracle Enterprise Manager(Oracle 10G) on Sun Solaris 10 platform?
    Thanks.
    RJ.

    I need to use it to unlock some accounts.There is a SQL command to do that
    SQL> alter user <username> account unlock;
    Anyway...
    $ export ORACLE_SID=chucky
    $ emctl start dbconsole

  • How to install the Workflow Manager for ?

    how to install the Workflow Manager for ? where can I find the information ?

    Ting,
    When you install the workflow server from the 10gdb DB, it will install the workflow manager as well. Please make sure you read the Metalink note 265554.1 for known issues and tips. Make sure you give the correct information in the WFCA as mentioned in the metalink note.
    Cheers,
    Raja

  • How to install LenovoEMC Storage Manager for Linux: Version 1.4.4.14439

    An Small step by step how to install this app. I this first example it was installed on Red Hat 6 Linux
    How to install LenovoEMC Storage Manager for Linux: Version 1.4.4.14439.
    1 - Download it from https://lenovo-na-en.custhelp.com/app/cust_alp/p/1031,1150
    2 - Change File permissions ( chmod +x setup-1.4.4.14439.bin)  
    3 - Now you can install so execute this sintaxis : ./setup-1.4.4.14439.bin
    4 - When app installation finishes, you must do it with this file into folder installation (chmod +x LenovoEMCStorageManager)
    5 - Then to open the app execute it: ./LenovoEMCStorageManager
    Video Tutorial
    How to install LenovoEMC Storage Manager for Linux: Version 1.4.4.14439
    In This second example I installed same version on Ubuntu 13.10. Look at the end of messages of thread and you will see this steps
    Install Storage Manager setup-1.4.4.14439.bin in ubuntu.
    Attachments:
    lenovoemcstoragemanager.jpg ‏27 KB

    Hello everyone ,
    I have a lenovo px4-300d, I'm on Ubuntu 13.10 64bits with Gnome 3 as GUI and I'm trying to install  the LenovoEMC storage Manager but it failed  :
    Preparing to install...
    Extracting the JRE from the installer archive...
    Unpacking the JRE...
    Extracting the installation resources from the installer archive...
    Configuring the installer for this system's environment...
    Launching installer...
    Graphical installers are not supported by the VM. The console mode will be used instead...
    Preparing CONSOLE Mode Installation...
    ===============================================================================
    Choose Locale...
        1- Deutsch
       ->2- English
        3- Español
        4- Français
        5- Italiano
        6- Nederlands
        7- Português  (Brasil)
        8- Svenska
    CHOOSE LOCALE BY NUMBER: 2
    =======================================================
    Installer User Interface Mode Not Supported
    The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The valid UI modes identifiers are GUI, Console, and Silent.
    =======================================================
    Is it still aproblem with the 64 bits architecture ?
    Have you find any solutions ? Thank you very much

  • How to install Oracle fusion middleware for peoplesoft

    Hi,
    How to install Oracle fusion middleware for peoplesoft,what are other components needs to integrate.
    thanks,
    saravanan

    You would install Oracle Fusion Middleware and select the right components you would use from that stack with Peoplesoft. Then install peopletools and point to the Oracle Fusion Middleware when prompted.

  • Oracle Enterprise Manager for Monitoring Siebel Servers/Component/Services

    Hi,
    I am looking for a document on Oracle Enterprise Manager for monitoring Siebel Servers/Component/Services so that it can notify us when something is down.
    Kindly send the document on [email protected]
    Thanks
    Gaurav

    Hi Gaurav,
    You can refer to below otn docs for details
    Enterprise Manager Getting Started with Application Management Pack for Siebel
    http://docs.oracle.com/cd/E24628_01/em.121/e26046/toc.htm
    Regards,
    Rahul

Maybe you are looking for