How to install Oracle on NON FILE SYSTEM platform(UNIX OR NT)

Anyone tell me

First of all thanks for your help,
I tried again with ./runInstall -ignoreSysPrereqs but I got another error...
"Starting Oracle Universal Installer...
Checking Temp space: must be greater than 120 MB. Actual 63827 MB Passed
Checking swap space: must be greater than 150 MB. Actual 6233 MB Passed
Checking monitor: must be configured to display at least 256 colors
>>> Could not execute auto check for display colors using command /usr/X11R6/bin/xdpyinfo. Check if the DISPLAY variable is set. Failed <<<<
Ignoring required pre-requisite failures. Continuing...Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-02-19_12-16-16PM. Please wait ...sh: /home/octopus/downloads/database/install/unzip: not found"
every time I try another way to install I get another error or something...
I tried the installations with the response file but I got the same error...
"Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-02-19_12-16-16PM. Please wait ...sh: /home/octopus/downloads/database/install/unzip: not found"
When I search for that file in " /home/octopus/downloads/database/install/" "unzip" is there.....
Any ideas???
Thanks in advance!

Similar Messages

How to install SAPOSCOL in non-sap server ?

Hi,
Please advise how to install SAPOSCOL into non sap system ? any related document / help ?
Thank You and Best Regards
Fernand

Hi,
The reason why, i want to install saposcol and sapagent in non sap system because i want to monitoring this serve with system monitoring.
Finally, i can install with install.cmd from this notes : 704349
Thank You and Best Regards
Fernand

How to create a new user id in OID for Oracle Collab suite File System

Dear Friends,
I want to know how to create a new user id in the oracle internet directory where i can use that user for the new subscription of the oracle collabration suite file system..
Please do the needfull and thanks in advance...
With warm regards
R.Prasad

Hi!
The way you suggest should not be used.
A CS user will be created as a normal OID user and will receive the CS attributes in a different subtree later during the provisioning.
For creating CS users use oesuser and uniuser. Files provisioning will work in a different manner anyway.
cu
Andreas

How to install oracle 9i database, 9i AS , 9i DS in a standalone system

hi,
can any one explain me the plan how to install oracle 9i database, 9i AS , 9i DS in a single standalone system. is it possible ?
if possible , can u suggest me how to plan these operations in detail.
thanks
N.RAM PRASAD

It's very easy to find. Please refer to this address: http://tinyurl.com/qmgk5v
Kamran Agayev A. (10g OCP)
http://kamranagayev.wordpress.com
[Step by Step install Oracle on Linux and Automate the installation using Shell Script |http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/]

How to install Oracle 9i on redhat 9

i have installed 4-5 times oracle 9i on linux ...but the thing is ..as soon i restart my pc..the SQLPLUS doest not start from the redhat 9 terminal
...So plz tell me the step by step procedure how to install Oracle 9i on linux ...
.... What & where is .bash_profile file is located ...???
How to create system shareable memory ...??? without this SQLPLUS is not starting ...
how to modify the kernel variables ..???
..

What & where is .bash_profile file is located ...???The file exists under oracle home directory.
# ls -l /home/oracle/.bash_profile
-rw-r--r-- 1 oracle dba 328 11? 2 15:35 /home/oracle/.bash_profile
How to create system shareable memory ? without this SQLPLUS is not starting.Append your shareable memory parameters to /etc/sysctl.conf, You might want to change these values if you have more RAM:
kernel.shmmax = 536870912
kernel.shmmni = 4096
kernel.shmall = 2097152
REBOOT the system so the kernel changes can take effect, or if rebooting is not an option, you can change the kernel params at runtime by issuing:
# echo 536870912 > /proc/sys/kernel/shmmax
# echo 4096 > /proc/sys/kernel/shmmni
# echo 2097152 > /proc/sys/kernel/shmall
how to modify the kernel variables ..???method 1:
To modify kernel parameters a common way is to change /proc file system:
1. Log in as root user.
2. Change to the /proc/sys/kernel directory.
3. echo <desired list of values> > <group of parameters>
But this update is not permanent and after system reboot, your kernel parameters's
values will be the same as before.
method 2:
setuping permanently kernel parameter values ,is to use '/etc/sysctl.conf' file.
Every time the system boots, the '/etc/rc.d/rc.sysinit' script is executed
by init process. This shell script contains a call to sysctl command and
reads the values from /etc/sysctl.conf file as the ones to be set Therefore, any values added to /etc/sysctl.conf will take effect after the system boot or without downtime using "sysctl -p" command

How to install oracle client on pentium 4

please can someone tell me how to install oracle client 8i on pentium 4 system. the installation is not going automaticlly , and if i explore the cd and press on the setup file the installing didnt start.

8i definitely has problems with Pentium IV processors. The fix is to copy the entire CD to the hard drive and then rename each copy of symcjit.dll to symcjit.old.

How to install AIR in Non-Admin rights PC ?

Who can teach me how to solve under issue ?
1.How to transfer AIR file to exe file
2.How to install AIR in Non-Admin rights computer?
-->In my company all PC has contorled, i want to install application in any Notebook for Sales Using,they can using AIR offline in anywhere
Thank you so much!!

On Mac OS, to install or update an AIR application, the user needs to have adequate system privileges to install to the application directory (and administrative privileges if the application needs to update the runtime). On Windows, a user needs to have administrative privileges.
IT administrators can install AIR applications silently using standard desktop deployment tools. For more information, see "Enterprise deployment" in the following page:
http://help.adobe.com/en_US/AIR/1.5/air_admin/WS5b3ccc516d4fbf351e63e3d11c0f5986ec-8000.ht ml#WS5b3ccc516d4fbf351e63e3d11c0f59823a-7fee

How to install Oracle Label Security in Oracle Database 10g EE

Hello All
I just want to know how to install Oracle Label Security in Oracle 10g Database EE.
I read in Oracle Enterprise Manager Grid Control Installation and Basic Configuration that Label Security must be installed before installing Enterprise Manager Grid Control.
I have Oracle Database 10g Release 1 (10.1.0.1) on my Windows XP System, and I patch it to 10.1.0.3.
M.
Sorry about my English.

Options is to connect to Oracle Policy Manager or use Oracle Internet Directory (OID)to administer Oracle Label Security.
Find more ways in the Documentation here:
http://download-uk.oracle.com/docs/cd/B19306_01/network.102/b14267/toc.htm

How to install Oracle Developer Suite 10g (10.1.2.0.2) for Linux

Hi All,
Please let me know how to install oracle forms on Linux red hat. I need to configure it with oracle database 10gR2. Please provide me step by step installation and configuration giude or you can pass on readme file which comes with the software.
Thanks,
Rahul

user8722581 wrote:
Hi ,
Given link is good and I can understand the architecture that it will be 3 tier--DB server-Application Server and Web Browser where Developer will access forms.
I would appreciate if you can provide some screen shots for the configuration details and files to be modified for the port and deploying the forms.
Whether we need to install apache,http or oracle application suite for the linux will take care?
Is there any pre-requisite health checktool like RDA.sh for the rdbms? Please let me know what are the important configuration file.
What is identity management in this?
Thanks.
Edited by: user8722581 on May 8, 2013 11:07 PMAll pre-req. are covered in the installation manual -- http://docs.oracle.com/cd/B19375_07/doc/frs/install/B19314_02/toc.htm
Thanks,
Hussein

How to install Oracle 10g release 2 on rhel4 release 2

I want to know How to install Oracle 10g release 2 on rhel4 release 2 from scratch from the partitioning of the disk in rhel 4 till the post installation .
System Configuration
x86 32 bit
Pentium(R) 4 CPU 3 ghz
RAM 1 GB 2.99Ghz
Oracle 10g release 2
rhel 4 release 2
Please reply me soon.
With Regards
Suvin Prathab
www.sceneworks.co.cc

Dear Suvin Prathab!
Please have a look at this:
[http://www.oracle.com/technology/pub/articles/smiley_10gdb_install.html]
Yours sincerely
Florian W.

How to install Oracle 10g on to Red Hat Linux 5 Server

I'm new to both Linux and Oracle. I've been working on an installion of Oracle 10g on a Red Hat Linux 5 Server for about 2 weeks. I've been doing a lot of reading about installing Oracle on a Linux environment. I finally got to the installation portion and the Oracle Installer displayed a message that I had to have Red Hat 4 or 4 Enterprise to continue.
How can Install Oracle 10g onto a Red Hat 5 Linux Server"? Is there an option that I can use to bypass the OS checking?
Thanks

Unfortunately there is no way to access metalink without a valid account. You could then just try to skip preinstall requisites with this clause:
./runInstaller -ignoreSysPrereqs
or this method:
Copy the oraparam.ini from the installation source install/oraparam.ini to /tmp directory.
Edit the file /tmp/oraparam.ini so this file reads:
After
[Certified Versions]
Linux=redhat-3,SuSE-9,redhat-4,UnitedLinux-1.0,asianux-1,asianux-2,redhat-5
also, make sure you have these packages installed:
# rpm -ivh gcc-c++-4.1.1-52.el5.i386.rpm gcc-4.1.1-52.el5.i386.rpm
libstdc++-devel-4.1.1-52.el5.i386.rpm glibc-devel-2.5-12.i386.rpm
glibc-headers-2.5-12.i386.rpm libgomp-4.1.1-52.el5.i386.rpm
libXp-1.0.0-8.i386.rpm compat-libstdc++-296-2.96-138.i386.rpm
compat-libstdc++-33-3.2.3-61.i386.rpm
~ Madrid.

How do I determine if my file system is case-sensitive before I buy Photoshop CS5?

How do I determine if my file system is case-sensitive before I buy Photoshop CS5? I currently have Mac OSX 10.5.8 with an Intel Core 2 Duo Processor and 4GB of Memory.. Adobe says the following requirements are needed..
2GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
1024x768 display (1280x800 recommended) with qualified hardware-accelerated OpenGL graphics card, 16-bit color, and 256MB of VRAM
Some GPU-accelerated features require graphics support for Shader Model 3.0 and OpenGL 2.0
I don't know if I have a "hardware-accelerated OpenGL graphics card" or "256MB or VRAM".. I've never heard of "VRAM" before and the last bullet points is just as confusing. The last thing I want to do is buy this program and discover my Mac Book is just a tad bit to old for it, I've already done that once with a video game.

Disk Utility highlighting the drive or partition & clicking the blue Info icon may report it, but since I don't have Case Sensitive I can't tell for sure.
A simple test would be to save a small txt doc as...
test
Then save to the place same as...
TEST
If both show on the Disk, then it is, if it asks to replace test with TEST then it isn't.

How to install Oracle 9i database ?

Hi all,
There are three folders named disk1, disk2 and disk3 given , and I want to know how to install Oracle 9i in a windows XP system ?
Thank you very much indeed.

There are three folders named disk1, disk2 an disk3 given , and I want to know how to install Oracle 9i ?Which OS??
disk1, disk2 an disk3 are 3 folders on a single mount point or 3 different mount points??
[http://www.puschitz.com/InstallingOracle9i.shtml]
[http://www.oracle-base.com/articles/9i/Oracle9iInstallationOnRedHat9.php]
Sorry, misunderstood the question.Extract the folders and click setup.exe in the installation folder.
HTH
Anand
Edited by: Anand... on Jul 22, 2010 10:05 PM

How to read some images from file system with webdynpro for abap?

Hi,experts,
I want to finish webdynpro for abap program to read some photos from file system. I may make MIMES in the webdynpro component and create photos in the MIMES, but my boss doesn't agree with me using this way. He wish me read these photos from file system.
How to read some images from file system with webdynpro for abap?
Thanks a lot!

Hello Tao,
The parameter
icm/HTTP/file_access_<xx>
may help you to access the pictures without any db-access.
The following two links may help you to understand the other possibilities as well.
The threads are covering BSP, but it should be useful for WebDynpro as well.
/people/mark.finnern/blog/2003/09/23/bsp-programming-handling-of-non-html-documents
http://help.sap.com/saphelp_sm40/helpdata/de/c4/87153a1a5b4c2de10000000a114084/content.htm
Best regards
Christian

How to Install oracle workflow and why we need Oracle Application Server

I want to install and configure Oracle Workflow using Oracle 10g
Please help me and guide me with the process in deatial from scratch what should i need to install
Oracle Database
Oracle Application server middle tier
Oracle Content Management SDK
Also help me how can i configuer oracle internet directory because when installing Oracle application server it requires HostName and Port No.
I am a student
I know just how to install oracle database 10g
and New to oracle Application Server
Waqar Habib

The files at
http://otn.oracle.com/software/products/ias/workflow/htdocs/winsoft.html
are for Oracle Workflow version 2.6.0. Here is some information from the announcement for downloading the latest version, 2.6.3:
Oracle Workflow 2.6.3 for Oracle Database 10g is now available for download from OTN.
Please point your browsers to http://otn.oracle.com/software/index.html
Currently, the availability is limited to Windows and we are working towards availability on other platforms. I will post another message as soon as it becomes available.
The Workflow Server requires an Oracle 10g database home and the Workflow mid-tier requires an Oracle HTTP Server home - Apache Install from the Oracle 10g Companion CD. For more information please read the installation notes.

How to install Oracle on NON FILE SYSTEM platform(UNIX OR NT)

Similar Messages

Maybe you are looking for