How to install oracle RAC 11g on oracle linux 5 using vmware workstation ?

Hello;
I need to Install Oracle RAC 11g R2 with database 11g ( 2 nodes ) but by using vmware workstation ( not server 2) on oracle linux 5-6 .
So any document can help me please ..
regards.

http://www.oracle-base.com/articles/11g/oracle-db-11gr2-rac-installation-on-ol5-using-vmware-server-2.php
http://appsdbaworkshop.blogspot.in/2011/10/11gr2-rac-on-linux-56-using-vmware.html
http://robertgfreeman.blogspot.in/2009/12/11gr2-rac-on-vmware-part-one.html

Similar Messages

How to install 11gR2 RAC on 64 bit linux OS

I am completely new to this topic of RAC and need to be installing and standing up RAC on Linux 64 bit OS . I have good knowledge of installing oracle database ENTERPRISE version 11gR2.
Can you guide me as to how to start. I am looking for leads. Probably we will have 2 nodes.
Thank you very much for helping me in advance

If you are a My Oracle Support (Metalink) user, go check out these two notes created by the Oracle RAC Assurance Team. They are excellent.
NOTE: 810394.1 RAC Assurance Support Team: RAC Starter Kit and Best Practices (Generic)
NOTE: 811306.1 RAC Assurance Support Team: RAC Starter Kit (Linux)
In the Linux note mentioned above there is a link to a Linux Step by Step Instruction Guide. This step by step instruction guide is the best start to finish document I've seen for how to set-up and install Oracle RAC. I believe the guide is written for installing release 11.2.0.2.

Oracle RAC 10g on Solaris x86 using vmware

Guys,
I am practising 10g RAC installation on my laptop, wherein I have vmware workstation and
solaris-x86 version 10 installed on it.
I am trying to install Oracle 10g clusterware.
I have followed the steps for clusterware installation.
I am facing an errror on one of the node while running root.sh.
On the first node, the root.sh runs fine.
The following is the log.
bash-3.00# ./root.sh
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
WARNING: directory '/u01' is not owned by root
Checking to see if Oracle CRS stack is already configured
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
WARNING: directory '/u01' is not owned by root
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: xsan001 xsan001-priv xsan001
node 2: xsan002 xsan002-priv xsan002
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Now formatting voting device: /dev/rdsk/c0d0s4
Format of 1 voting devices complete.
Startup will be queued to init within 30 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
CSS is active on these nodes.
xsan001
CSS is inactive on these nodes.
xsan002
Local node checking complete.
Run root.sh on remaining nodes to start CRS daemons.
=============================
On the second node, the root.sh gives error.
bash-3.00# ./root.sh
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
WARNING: directory '/u01' is not owned by root
Checking to see if Oracle CRS stack is already configured
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
WARNING: directory '/u01' is not owned by root
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: xsan001 xsan001-priv xsan001
node 2: xsan002 xsan002-priv xsan002
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Now formatting voting device: /dev/rdsk/c0d0s4
Format of 1 voting devices complete.
Startup will be queued to init within 30 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
Failure at final check of Oracle CRS stack.
10
Can you provide some sort of clue what could be done to resolve the above error?

Refer to http://www.oracleracsig.org/ Under documents section select OS=Solaris. You will find a document on Oracle RAC on Solaris10 using Vmware.

Oracle RAC Installation on personal computer using VMWare

Please can you tell me the steps to Install Oracle 10g RAC using VMware in my personal computer which is a dual core processor and no Hardware RAID avaialable?

Hi,
It is many steps...
Windows
http://www.oracle-base.com/articles/10g/OracleDB10gR2RACInstallationOnWindows2003UsingVMware.php
Linux
http://www.oracle-base.com/articles/10g/OracleDB10gR2RACInstallationOnCentos4UsingVMware.php
That is basic installation in production is different eg.
put CRS_HOME in place where root is owner of parent directory, apply patchset after every component eg. install crs and then patch crs, instal asm then patch asm ....
you have to patch crs because of UNKNOWN statuses
Regards

How to install windows 7 on Imac late 2009 using Vmware/Vbox

Hey guys. Here's the thing. I've installed Windows 8 on my imac late 2009 but then i realized that there's no bootcamp drivers for it (check image).
everything works fine except for the video drivers that crash everytime when i install any driver (bootcamp or manually).
So I've searched on many forums n i found a guy that could do that by using Vmware/Virtualbox by accessing the full disk n installing it from there.
Here's what we wrote -> (http://forums.macrumors.com/showthread.php?t=1526883)
"Thanks for the suggestions, but installing from usb wasn't working, and refit didn't recognise the external dvd drive too (it was in the list, but when i tried to load it i got an error).
But i found a solution, not usual procedure but still good and easy to do.
I installed virtualbox, created a virtual machine with the full disk access (you'll have to unmount all the partitions first and run virtualbox as root), started installing windows, when the copy of the files ended and the vm was rebooting i simply closed it and rebooted my imac and finished the installation directly on the imac, everything went well...
Thanks again for the help"
Important notes :
- My superdrive is broken
- I can't boot efi windows 7 (cause it needs efi 2.0)
So i might ask u 2 things..
1- Is there a way that i can install all those drivers on windows 8.
2- Can u describe how he did that with Vmware/Virtualbox?

I can't. Just like i said. My superdrive is broken so the only way is to boot from usb but my imac's efi firmware is 1.0 and to boot a windows 7 efi you must have at least efi firmware 2.0. I managed to install windows 8 cause it needed efi firmware 1.0 that's why.

Oracle RAC 11g on Windows 2008 64 bit - blue screen error on both nodes

Hi Everyone,
I installed Oracle RAC 11g on Windows 2008 64 bit, The installation was successfull and crs_state -t shows all services in two nodes are online.
When executed a select query with 100 sessions( For performance evaluation using Transaction generator ) ,the machine got crashed and blue screen is appeared on two nodes. I restrated the machines and and starts the same evaluation ,bt the same bug is repeating.
Can anyone suggest a solution to solve this issue? Is our hardware is not sufficient ? Shall we need to perform any
specific settings in Oracle RAC setup for performance evaluations?
Is our settings for load balancing is not enough? ( We added "Load Balancing= On" on tnsnames.ora on client for load
balancing)
The following machine configuration is used for Oracle RAC setup
Intel Core 2 Duo 2.66 GHz,
Ram :4GB.
OS : windows 2008 Server 64 Bit
Oracle RAC 11g , Clusterware 11g R2 , ASM with 5 raw disk ( 1- votting disk ,1- ocr files and 3 disk files)
Edited by: user2033016 on Jun 29, 2011 10:02 PM

user2033016 wrote:
Hi Everyone,
I installed Oracle RAC 11g on Windows 2008 64 bit, The installation was successfull crs_state -t executed successfully.
Bt the machine got crashed ,when executed a select query with 100 sessions( For performance evaluation using TG). A blue screen is appeared on two nodes. So i am not able to evaluate the performance.
Can you please tell any suggesstions to solve this issue? Is our hardware is not sufficient? Or any software settings has to be done?. I tried most of hte technique ,bt the problem still exists.
The following machine configuration is used for Oracle RAC setup
Intel Core 2 Duo 2.66 GHz,
Ram :4GB.
OS : windows 2008 Server 64 Bit
Oracle RAC , Clusterware 11g R2 64 Bit.i guess you have installed/configured RAC using VMware. i guess, the problem is with your RAM size. how much disk space and RAM size you have allocated for each machine?
which documentation you have followed?

Modify parameter file ORACLE RAC 11G

Dear all
I have a production ORACLE RAC 11G database. i want to modify shared spfile parameter file in RAC .But spfile is shared file which is on ASM.
how to achive it using pfile, actually i want to change in pfile and then make a spfile in ASM which is shared by all instances
Please reply soon

846671 wrote:
Dear all
I have a production ORACLE RAC 11G database. i want to modify shared spfile parameter file in RAC .But spfile is shared file which is on ASM.
how to achive it using pfile, actually i want to change in pfile and then make a spfile in ASM which is shared by all instances
Please reply soonYou know that the modifications you'have done on spfile are not active until you restart DB. So why don't you want to modify the spfile by "alter system ... scope=spfile" commands? I don't see the point to create pfile, modify it and recreate spfile...
http://download.oracle.com/docs/cd/B28359_01/install.111/b28264/params.htm#CIHIDAHD

Oracle RAC 11g on EL5/XEN/NFS

I have written a small article on my Linux/Xen para-virtual based RAC 11g system
http://boulayp.free.fr/articles.php?lng=fr&pg=170

user2033016 wrote:
Hi Everyone,
I installed Oracle RAC 11g on Windows 2008 64 bit, The installation was successfull crs_state -t executed successfully.
Bt the machine got crashed ,when executed a select query with 100 sessions( For performance evaluation using TG). A blue screen is appeared on two nodes. So i am not able to evaluate the performance.
Can you please tell any suggesstions to solve this issue? Is our hardware is not sufficient? Or any software settings has to be done?. I tried most of hte technique ,bt the problem still exists.
The following machine configuration is used for Oracle RAC setup
Intel Core 2 Duo 2.66 GHz,
Ram :4GB.
OS : windows 2008 Server 64 Bit
Oracle RAC , Clusterware 11g R2 64 Bit.i guess you have installed/configured RAC using VMware. i guess, the problem is with your RAM size. how much disk space and RAM size you have allocated for each machine?
which documentation you have followed?

Oracle RAC 11g - Transition queries

Hi,
I am about to get transition on Oracle databases used currently by one of the client managed by another vendor.
I would like to I have a check list sort of thing for getting transition on Oracle RAC 11g r2 from the current vendor.
Appreciate if anybody can help me on this asap.
Thanks in advance.

user2033016 wrote:
Hi Everyone,
I installed Oracle RAC 11g on Windows 2008 64 bit, The installation was successfull crs_state -t executed successfully.
Bt the machine got crashed ,when executed a select query with 100 sessions( For performance evaluation using TG). A blue screen is appeared on two nodes. So i am not able to evaluate the performance.
Can you please tell any suggesstions to solve this issue? Is our hardware is not sufficient? Or any software settings has to be done?. I tried most of hte technique ,bt the problem still exists.
The following machine configuration is used for Oracle RAC setup
Intel Core 2 Duo 2.66 GHz,
Ram :4GB.
OS : windows 2008 Server 64 Bit
Oracle RAC , Clusterware 11g R2 64 Bit.i guess you have installed/configured RAC using VMware. i guess, the problem is with your RAM size. how much disk space and RAM size you have allocated for each machine?
which documentation you have followed?

Oracle RAC 11g R2 installation complete installation guide

Hi,
Please suggest any oracle docs for Oracle RAC 11g R2 installation complete installation.
I am in process for installating Oracle RAC 11g r2 first time in my life this weekend.please help.

Hi Praveen,
Tim Hall has a perfect guide for installing Oracle RAC, you can review all the articles here:
http://www.oracle-base.com/articles/11g/articles-11g.php#db11g_release_2_installations
Consider also getting familiar with Real Application Clusters, because installing is only the very top of the solution and knowledge of how it works is a must:
http://www.oracle.com/pls/db112/portal.portal_db?selected=16&frame=#oracle_real_application_clusters
Regards,
Sve

Oracle rac 11g installation

Hi
Am planning to install oracle RAC 11g on linux server. Have doubt on installation of clusterware or grid infrastructure first .?
I think grid infrastructure covers clusterware and ASM both and then oracle 11g software to be installed.
But how to download grid insfrastructure software. Will it come with oracle 11g software..? or need to download it seperately.?
Because when i try to download oracle RAC 11g which gives link to download the 11g software not grid.
Thanks in advance,

Hi,
Its called "oracle one node rac" you will find plenty of documents on metalink, extract is below, hope this helps you to understand the differences.
Oracle RAC Database : Oracle RAC database is a clustered database. It can have more than one instance running on one or more hosts. To make is database RAC , there is another software needs to be installed called Oracle Grid infrastructure which takes care of multinode sync, ASM, Oracle restart etc. Oracle GI is necessary as a base of Oracle RAC. In Oracle RAC, the load is balanced across multiple instance of databases running on different nodes. This is best for Production database. Failure of any instance is abstracted from user and forwarded to another instance from the database server pool. No of instances can be controlled using Policy Managed or Admin Managed.
Oracle RAC One Node : Some time we need to have RAC databases but donot need many instances, why? Simple answers to it is leverage the high availability of RAC. The Oracle RAC One node is a RAC DB runs on one host. The advantage is it saves your resource, can to converted to full RAC any time, Cluster fail over i.e. the Database instance is moved to new instance in case of any failure on host known as Instance Relocation,easy to upgrade etc. This type of database is well suited for small production and dev/test environments.

Where to download and how to install X Window System for Oracle Linux 5 ?

Folks,
Hello. I am using Oracle Linux 5 and Oracle Database 11g for PIA.
Before install Oracle DB 11g into Oracle Linux 5, we need to install X Window System according to the document page 2 http://download.oracle.com/docs/cd/B28359_01/install.111/b32285.pdf
But I don't know where to download and how to install X Window System for Oracle Linux 5.
Can any folk provide a link to download X Window System and tutorial to install it for Oracle Linux 5 ?

You can address the problem in a number of different ways.
You can install X-windows from the installation DVD or setup access to the Oracle public software repository as described in http://public-yum.oracle.com. In which case, the command to install X-windows is: yum groupinstall "X Window System"
Or, you login remotely and and use SSH with X-forwarding, in which case the software on the server will use the X-Windows server on your client system. This is probably the preferred way since you do not have X-windows installed on the server. For more details about SSH forwarding and howto, please see Install Oracle 11gR2 on Ubuntu Linux 11.04 (64-bit) Howto part 2 Oracle Universal Installer.

Configure UCP/FCF for oracle RAC 11g R2 in JBOSS

I am trying to configure UCP/FCF with Oracle RAC 11g R2.
Currently, I have configured oracle-ds.xml in Jboss in my deploy folder.
I have got this working using jboss connection pool
<xa-datasource>
<jndi-name>name1</jndi-name>
<track-connection-by-tx>true</track-connection-by-tx>
<isSameRM-override-value>false</isSameRM-override-value>
<xa-datasource-class>oracle.jdbc.xa.client.OracleXADataSource</xa-datasource-class>
<xa-datasource-property name="URL">
jdbc:oracle:thin:@(description=(address_list=(load_balance=on)(address=(protocol=tcp)(host=sample1.oracle.com)(port=1521)))(connect_data=(service_name=ha1)))
</xa-datasource-property>
<xa-datasource-property name="User">dbo_9</xa-datasource-property>
<xa-datasource-property name="Password">dbo_9</xa-datasource-property>
<exception-sorter-class-name>
org.jboss.resource.adapter.jdbc.vendor.OracleExceptionSorter
</exception-sorter-class-name>
<no-tx-separate-pools/>
<min-pool-size>100</min-pool-size>
<max-pool-size>100</max-pool-size>
<check-valid-connection-sql>SELECT 1 FROM DUAL</check-valid-connection-sql>
<new-connection-sql>SELECT 1 FROM DUAL</new-connection-sql>
</xa-datasource>
1. I have configured ONS on database server. (racnode1:6200,racnode2:6200)
2. I have copied ons.jar,ucp.jar,ojdbc6.jar in classpath.
Now, how do I enable UCP and configure FCF in jboss.
can anybody please help me?
Edited by: user10697869 on Dec 14, 2011 12:22 PM

not supported ..

Error during installation Oracle RAC 11G

Hi experts;
I'm installing Oracle RAC 11G, this installation will be in two virtual servers, OS Linux redhat.
I began the installation with these steps
Configure Security Updates
then ask for proxy server information (nothing was entered), continue
Installation Option (don't ask anything)
then System Class (Server class selected)
Grid Options
(Real Application Clusters database installation)
when hit ENTER I got this errror message - (INS - 35354) The system on which you are attempting to install Oracle RAC is not part of a valid cluster.
I was looking in some forums an I found one where indicates I should indentiify these files and change some info on them;
=============================================================================
cat /etc/oraInst.loc
The ouput of the above command lists the inventory_directory
Browse to the inventory.xml file in that directory. My oraInventory
cd /u01/app/oracle/oraInventory/ContentsXML/
cat inventory.xml
You can verify that the flag CRS=true isn’t set for the $GRID_HOME
==============================================================================
However, I couldn't find any of those files in my directories.
also, i was verifying the note [ID 1053393.1, but again, I couldn't find where to change the values for CRS.
Any idea what I'm doing wrong?
I will apreciate your help.
Regards
Al
b

Hi,
RAC is a database in a cluster. One Database opened by one o more instances in one or more hosts.
Note: RAC is not a cluster, but a Database cluster.
To allow database be clustered, we need to install a software cluster.
We have some options, but Oracle developed your own software cluster actually named Grid Infrastructure for a cluster AKA Oracle Clusterware.
To install RAC you need first install and configure your cluster.
Before you start install Oracle cluster/RAC I recommend you start with concepts.
http://docs.oracle.com/cd/E14072_01/rac.112/e10717/intro.htm
http://docs.oracle.com/cd/E14072_01/rac.112/e10718/admcon.htm
Regards,
Levi Pereira

ORACLE_HOME in Oracle RAC 11g (Windows Server 2008)

Hello,
I've got two (2) nodes in an Oracle RAC 11g in Windows Server 2008. Oracle software is installed in C:\app.
I realized that it's not been set ORACLE_HOME path. In System Properties-> Advanced -> Environment Variables, I see that ORACLE_HOME is empty.
- Which path would be the ORACLE_HOME: C:\app\bd\product\11.2.0\dbhome_1
- Do you have to setup the same in both nodes?
Thanks

I realized that it's not been set ORACLE_HOME path. In System Properties-> Advanced -> Environment Variables, I see that ORACLE_HOME is empty.its normal behaviour
- Which path would be the ORACLE_HOME: C:\app\bd\product\11.2.0\dbhome_1if you installed that location, yes
- Do you have to setup the same in both nodes?actually, you dont HAVE TO, its not needed at all

How to install oracle RAC 11g on oracle linux 5 using vmware workstation ?

Similar Messages

Maybe you are looking for