How to install oracle10g grid control on windows

i want,
how to install oracle10g R3 grid control on windows
in my server ,i have 4 database ..oracle10g R2 ..is running...

http://download.oracle.com/docs/cd/B16240_01/doc/nav/portal_booklist.htm

Similar Messages

How to install oracle10g grid control

hi
i want,how to install oracle10g grig control on windows...
i installed Db server 10g R2..

http://download.oracle.com/docs/cd/B16240_01/doc/nav/portal_booklist.htm

Installing Oracle10g Grid Control - - - management service hostname

Oracle 11g R1 RHEL 4 64bit
Grid Control 10.2.0.4
HI All,
I am installing the Oracle agent and when I get to the 'Specify Oracle Management Service Location' screen it asks for the 'Management Service Host Name'. Is this the same as my database server hostname? I'm not sure what to put here. When I do put the database server hostname in, then it says it can't locate port 4889 on that server. However, if you keep going through the install everything succeeds in the end. BUT, when I go to the link http://<management_service_hostname>:4889/em then nothing shows up. I am new with grid control. Anyone have any ideas?
Thanks.

Great. Thanks for your reply Bobcatalog!
Now I just want to get this all cleared up before I proceed with the installation. So here is what I am thinking of doing and please tell me if I am wrong, missing something or should do it another way.
1. Install OEM Grid Control 10.2.0.3 on a new host (server) which has nothing on it (i.e. no Oracle products - - - clean host) and then patch it to 10.2.0.4.
- I will use the create new database option, which will create the EM Repository database
- I will (or it will) install the OMS as well as the OMA (Oracle management Agent)
(Question: Should I install OEM Grid Control on just a regular filesystem or use ASM with it? I heard that there are issues with using ASM. If it will increase my chances of failure, then I will stay away from it...even though all our environments (DEV, PROD, QA) use ASM.
2. Install the OMA agent on each of the database servers (which are called 'targets') that I want to monitor.
And that is all that I will need to do, correct?
Thank you.

How to install EM Grid Control ?

Hi,
I try to install EM Grid Control on my Solaris system.
Choosing "Installing EM with new database" the installer will terminate with the error message: "SYSTEM password is wrong."
Does anybody know wich is the correct one ?
Choosing "Installing EM on existing datbase" everything works fine. But I'm unable to login ?
Which are the correct username/passwords I have to enter when starting the brower at http/<hostname>:1810/em ?
Thanks for any help or ideas.
Regards,
Rainer

I am also having this problem using the XP version. Initially I got around it by selecting the "Restore" rather than "start" and I only got the request for the database login, which is initially for "sys" your installation password. This worked the first time I had the problem. Now I have successfully migrated and Access db to the intallation and when I tried to take the database down it prompted me with the same OS user and password combination followed by database user and password as before. But, now there is no way to get pass the OS username/password requirement. I have made multiple attempts as requested and nothing works. I have changed the username and password as administrator at the XP control panel and nothing works to satisfy this OEM login prompt. Thus I can't take the database down. I would appreciate any help in this area. Kind regards, Michael.

How to install OEM Grid Control R2 on RHEL AS4 (AMD64/EM64T)

Hi all,
I was able to install the Oracle Application Server (Infrastructure and BI and Forms) successfully on the another machine with the same specs. The application I installed on the 64-bit machine is a 32-bit Oracle Application Server.
Now, I tried to install the OEM Grid Control R2 (another 32-bit Oracle Software) on an identical 64-bit machine but had no luck. Ran linux32 bash before trying the install.
I always get the error "error in invoking target 'dm_on ioracle' of makefile 'OH/db10g/rdbms/lib/ins_rdbms.mk".
Please help me/guide me in this install if it is at all possible.
Thanks and regards,
Mike

Did you read the installation docs?
Did you look up trying to do this on metalink before proceeding?

Grid Control for windows

Hi Experts,
We're trying to download and install Oracle grid control for windows 64bit but we can't find any 64bit release!
Can we safely download and install Enterprise Manager 11g Grid Control Release (11.1.0.1.0) - Windows 32bit from http://www.oracle.com/technetwork/oem/grid-control/downloads/index.html ? or should we be installing a different version??
Should Grid control be installed on the DB server in the 1st place or should it be installed on another server?
Current Oracle Software: 11.2.0.1 64bit.
Server OS: Windows 2008 Server 64bit.
Can you kindly let us know.
Thanks

We finally got our facts right..
The Grid Control Enterprise Manager comes only in 32 bits.. However the Grid Control agent that needs to be installed on the DB server comes in 32/64bits and is supported under different OS platforms.
Metalink (Doc ID 412431.1) shows the Oracle Enterprise Manager Grid Control Certification Checker/matrix that we found extremely useful.
Enterprise Manager Grid Control comes with the basic features and is free to use. Any extra features are considered addons and do need to be properly licensed.
Thanks

How To Install/Configure OEM Grid Control On Windows

Hi,
I've downloaded OEM Grid Control for windows (32-bit) from oracle site.
This .zip files has 3 more .zip files eg
File Size
3822442.zip 510 MB (535,208,588 bytes)
3731596.zip 275 KB (282,502 bytes)
3731593.zip 510 MB (535,047,905 bytes)
Can you pls tell me which one is actual OEM Grid Control software, and what are the other .zip files ?
Pls email me at [email protected]
Your help greatly appretiated.
Regards,

You will be needing all three zip files. It will contain all files needed for installation of a repository Database Instance, the Management Server and an Management Agent.
cheers
Rob

Install of OEM 10g Grid controll on windows break my listener

Hi!
I install OEM 10g Grid controll to Windows 2000 server, successfully (a new database to the repository also was created by the installer).
When I restart our server the service of the Listener did not started (it was set to automatic) and I did not able to start it.
First I see the "Listener.log" and the trace file.
The problem was that the listener intended to load adapter protokoll and refer to the "orantcp9.dll"!
Because before the install I create a 10.1.0.2 database the path of the file point to the "Db_1\bin" and here is "orantcp10.dll" exists.
The "orantcp9.dll" is exists in "em_1\bin".
What and how can I fix?
An additional question : during my secont installation I select to create the repository into an existing database, but the installer refuse it because my DB version was 10.1.0.2 and not 10.1.0.3.
How can I create DB with 10.1.0.3 version on Windows?
I am in a deadlock :-)
Regards,
Imre

Try MetaLink Doc Id 284680.1
The issue was that the EM Grid Control created an ORACLE_HOME environment variable. All you have to do is delete the variable, move the Database Oracle Home entries in the path to the front, and reboot the server.

Steps to install Oracle grid control 10g on windows

dears ,
kindly I need to install oracle grid control 10g release 5 on windows
so please if any one have a detailed step-by-step document for that post it to me ASAP
Regards.

Hi;
Please check below link
Oracle® Enterprise Manager Grid Control Installation and Configuration Guide 10g Release 5 (10.2.0.5.0)
http://download.oracle.com/docs/cd/B16240_01/doc/install.102/e10953/installing_em.htm
http://kamranagayev.wordpress.com/2011/01/31/video-tutorial-installing-oracle-10 gr2-grid-control-and-deploying-agent/
Regard
Helios

Error while installing 10g EM Grid Control on Windows 2003

Hi Experts,
I am facing following error while installing EM Grid Control, please help me find solution:
Here are the installation error found in the log file:
INFO: oracle.sysman.top.oms:Start Opmn Error = CMD /C C:\OracleHomes\oms10g\opmn\bin\opmnctl startall
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:CMD /C C:\OracleHomes\oms10g\opmn\bin\opmnctl startall have completed with exitCode=206
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stdout:
'opmnctl: starting opmn and all managed processes...
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stderr:
'================================================================================
opmn id=emgc:6201
5 of 6 processes started.
ias-instance id=EnterpriseManager0.emgc
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
HTTP_Server/HTTP_Server/HTTP_Server
Error
--> Process (pid=1416)
failed to start a managed process after the maximum retry limit
Log:
C:\OracleHomes\oms10g\opmn\logs\HTTP_Server~1
INFO: oracle.sysman.top.oms:OmsPlugIn:Requested Configuration Step 5 have been completed with status=false
INFO: oracle.sysman.top.oms:EmcpPlug:invoke:Completed EmcpPlug invoke method on an aggregate=oracle.sysman.top.oms for Action=configuration in step=2:microstep=0
INFO: oracle.sysman.top.oms:The plug-in OMS Configuration has failed its perform method
INFO: OuiConfigVariables:IAction.perform() was called on {Action state:OUICA in CfmAggregateInstance: OuiConfigVariables:1.0.0.0.0:common:family=CFM:oh=C:\OracleHomes\oms10g:label=0}
INFO: Framework waiting for Action to complete at 11:45:05.168
INFO: CfwProgressMonitor:actionProgress:About to perform Action=OUICA Status=is running with ActionStep=0 stepIndex=0 microStep=0
INFO: OuiConfigVariables:About to execute plug-in OUI_CA
INFO: OuiConfigVariables:The plug-in OUI_CA is running
INFO: OuiConfigVariables:Launching CmdExec
INFO: OuiConfigVariables:ExitCode=0
INFO: OuiConfigVariables:The plug-in OUI_CA executed as attached=true in separate process with exitcode=0
INFO: OuiConfigVariables:The plug-in OUI_CA has successfully been performed
INFO: done waiting for Action from 11:45:05.168
INFO: Cfm.save() was called
INFO: Cfm.save(): 21 aggregate instances saved
Any help or direction will be highly appreciated.
Regards,
MS

i followed the link and all the instructions things seemed to go well: it still asked for two files i did not have or could not locate: first its asked for generalstub, then it asked for seedstup and then generalstup again. at this point the installation was at 67% and had passed the link succesful stage and was at the setup succeful stage. when i clicked ignore on generalstub, seedstup and then generalstup again it quicly moved to 100% and never took me to the stage for me to run oraInstroot.sh and allroot.sh
the configuration assistant stage never cameup and it skipped to the page Specify Repository Database Configuration
where it asked for repository database hostname port, service/sid and SYSMAN password and also manament service security password. whe i input all the infor mation it will give errors. i have tries deleting all oracle 3 or 4 times and all files that oracle has and repeated the process and am always stuck here.
error reads :
-error cheching the existence of the SYSMAN user in Management repository
-exception occured while connecting to database . please check the connection details you specified and retry
-io exception connection refused: (DESCRIPTION=(TMP=)(VSNUMM=168821760)(ERR=12514)(ERRO_STACK=(ERROR=(CODE=12514)(EMFI=4))))
REP DB HOSTNAME:SA-OMS-01
PORT:1521
SERVICE/SID:OMSDB01
SYSMAN PASSWORD:PASS
THE REST I PUT PASS AS PASSWORD
NOT SURE WHAT TO DO NEXT.

Installing EM Grid Control 10.2.0.3 with Database 10.2.0.3 On RHEL4 U3 & U4

Note: This is not an official document, it discusses Oracle Enterprise Manager Grid Control (EMGC) installation on Redhat Linux Update 3 & Update 4 with new database NOT with an existing database. Both OS Updates were installed with FULL PACKAGE INSTALLATION option. Oracle Universal Installer creates the database automatically before creating the EMGC repository.
•     For Linux the base version of the EMGC is 10.2.0.1 and for Windows platform it is 10.2.0.2.
•     The database release is 10.1.0.4 with EMGC 10.2.0.1.
•     When installed it creates three Oracle Homes: 1) db10g (database), 2) oms10g (Oracle Management Service), and 3) agent10g.
Course of Action:
To get to Oracle EMGC 10.2.0.3:
•     Install EMGC 10.2.0.1
 Upgrade Oracle Home oms10g to 10.2.0.3.
 Upgrade Oracle Home agent10g to 10.2.0.3.
To get to Oracle Database 10g 10.2.0.3:
•     Oracle Database 10g 10.1.0.4 will get installed by the OUI automatically
 Upgrade Oracle Database 10g to 10.2.0.1 in new Oracle DB Home.
 Upgrade new Oracle DB Home to 10.2.0.3.
====================================
Installing EM Grid Control 10.2.0.1:
====================================
To install EMGC 10.2.0.1 download all the three files: Linux_Grid_Control_full_102010_disk1.zip, Linux_Grid_Control_full_102010_disk2.zip, Linux_Grid_Control_full_102010_disk3.zip from http://www.oracle.com/technology/software/products/oem/htdocs/linuxsoft.html.
If you have unzipped all the downloaded zip files in separate directories then the very first error message slammed at your face after starting the installation will be something like “OUI-10133: Invalid Staging Area. There Area No Top Level Components”. All you have to do is to unzip all the three files in the single directory (Metalink 395030.1).
After unzipping all the files in the same directory follow the steps that are given on the follow URL.
http://www.oracle.com/technology/obe/obe10gemgc_10202/install/install.htm
BUT the problem is that you will be punched with few other error messages during the installation that will terminate the installation. The WORKAROUND is given below.
There are three stages of the installation by OUI:
1.     Installation of EM Repository Database 10.2.0.1.
2.     Installation of EM Grid Console 10.2.0.1.
3.     Installation of Agent 10.2.0.1.
The first stage completes without any problem and on the OUI you will see: Oracle Enterprise Manager Repository Database 10.2.0.1.0 installed. While installing the Grid Console, during copying files for "Oracle Application Server 10g 10.1.2.0.2" at 90% OUI will pop up an error message "An error occurred during runtime." You will see lines similar to the following lines in the installation log files.
INFO: Calling Action SpawnActions10.1.0.3.0 Spawn
installcommand = /u01/app/oracle/product/10.2.0/oms10g/bin/OracleAS_Relink_Patch.sh
deinstallcommand =
WaitForCompletion = null
INFO: Exception occured during spawning :java.io.IOException: /u01/app/oracle/product/10.2.0/oms10g/bin/OracleAS_Relink_Patch.sh: cannot execute
INFO: Spawning the modified command :/u01/app/oracle/product/10.2.0/oms10g/bin/OracleAS_Relink_Patch.sh
INFO: Exception thrown from action: Spawn
Exception Name: RuntimeException
Exception String: An error occurred during runtime.
Exception Severity: 0
Problem:
There is a bug which is still being worked on by the DEV : Bug 5203165 : Abstract: CANNOT EXECUTE ../oms10g/bin/OracleAs_Relink_Patch.sh AT INSTALL
Note that this is an unpublished bug, not viewable via Metalink. The bug apparently occurs only on RHEL4 (32bit) Update 2 and Update 3 (I faced the same thing in Update 4 as well).
Workaround:
•     Leave the error message as it is and change the execution permission of the script OracleAS_Relink_Patch.sh.
$ chmod +x /u01/app/oracle/product/10.2.0/oms10g/bin/OracleAS_Relink_Patch.sh
•     Now press Retry on the error message pop up window. The installation will resume.
On the same stage while linking at 90% one another error message will pop up “Error in invoking target 'install' of makefile '/u01/app/oracle/product/10.2.0/oms10g/sqlplus/lib/ins_sqlplus.mk'”.
Problem:
Hitting bug : 5203194 :Abstract: RELINK FAILS ON 10.2 GC INSTALL -LIBCLNTSH.SO: UNDEFINED REFERENCE TO NNFGTABLE
Bug is not published in Metalink. As per the description: Installing 10.2.0.2 Grid Control on RHEL4 Update 2 or Update 3 (I faced the same thing in Update 4 as well). This generates an error in the linking phase. The error is generated while attempting to relink sqlplus.
Workaround:
•     Stop installation of all components.
•     Restart the installation and pick the option to resume the installation.
•     This allows the installation to complete.
If by any chance you press continue instead of stopping the installation you should get ready for the garbage OUI is going to throw at you:
Error in invoking target 'install' of makefile '/u01/app/oracle/product/10.2.0/oms10g/network/lib/ins_net_client.mk'
Error in invoking target 'install' of makefile '/u01/app/oracle/product/10.2.0/oms10g/network/lib/ins_nau.mk'
Error in invoking target 'install' of makefile '/u01/app/oracle/product/10.2.0/oms10g/webcache/lib/ins_calypso.mk'
During Setting up 'Perl Interpreter 5.6.1.0.2d'
An error occurred during runtime
During Setting up 'Oracle Application Server 10g 10.1.2.0.2'
The OPMN Process Manager failed to start. Please check the logs in the /u01/app/oracle/product/10.2.0/oms10g/opmn/logs directory for the cause of failure. Once the cause of failure has been remedied, start OPMN manually and click Retry.
HTTP Server Configuration Assistant Failed.
OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
====================================
Upgrading EM Grid Control 10.2.0.1 to 10.2.0.3:
====================================
I hope after installing EMGC 10.2.0.1 you are still intending to upgrade it..... :-D Now for that download GridControl_10.2.0.3_Linux.zip from http://www.oracle.com/technology/software/products/oem/htdocs/linuxsoft.html and follow the README.txt file included with the upgrade patch. Before starting the upgrade you will probably have to apply a patch (4329444) on the existing database (10.1.0.4). Anyway, its one of the prereq that you have to complete.
For upgrade follow the steps given on the following URL.
http://www.oracle.com/technology/obe/obe10gemgc_10203/patching/patching.htm
•     Keep one thing in mind that you will have to apply the above mentioned patch twice. Once for oms10g home and once for agent10g home.
•     Stop all the EMGC related services.
•     When applying the patch to a particular home change the ORACLE_HOME to that home. E.g. when applying the patch on the oms10g home:
ORACLE_HOME=$ORACLE_BASE/product/10.2.0/oms10g
and for agent10g home:
ORACLE_HOME=$ORACLE_BASE/product/10.2.0/agent10g
====================================
Upgrading Database from 10.1.0.4 to 10.2.0.1:
====================================
Download the file 10201_database_linux32.zip from http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10201linuxsoft.html.
•     Shutdown all the EMGC related services, the listener, and the database.
•     Start the installation of 10.2.0.1.
•     Since 10.2.0.1 is a base release that is why you cannot install it in the existing Oracle Home i.e. in db10g. You have to define a separate Oracle Home for the new installation say db10gR2.
•     During the installation it will ask you to upgrade the existing database 10.1.0.4 to 10.2.0.1, click YES.
•     Hopefully the installation will go just fine.
====================================
Upgrading Database from 10.2.0.1 to 10.2.0.3:
====================================
Download the file p5337014_10203_LINUX.zip from http://metalink.oracle.com.
•     Shutdown all the EMGC related services, the listener, and the database.
•     Start the installation of 10.2.0.3.
•     During installation it will ask for the Oracle Home, give the new Oracle Database Home i.e. db10gR2 and proceed.
•     Hopefully the installation will go just fine.
•     Start the database, listener, and all the EM GC related services:
o     $ORACLE_HOME/../oms10g/bin/emctl start em
o     $ORACLE_HOME/../agent10g/bin/emctl start agent
o     $ORACLE_HOME/../oms10g/opmn/bin/opmnctl startall
•     Try accessing the EMGC through the browser http://xyz.abc.com:4889/em
•     You will see two Oracle databases in the EMGC, the old one, 10.1.0.4 and the new one 10.2.0.3. Don’t worry it will not bother you at all. It will only occupy a GB or so. Though, you can remove it through OUI.
Congratulations!!!! you have now Enterprise Manager Grid Control 10.2.0.3 with Database 10.2.0.3 on RHEL 4 Update 3.
You can repeat the same exercise for RHEL4 Update 4 as well, but during pre-installation checks you will get 1 warning that:
Checking for compat-libstdc++-296-2.96-132.7.2; found Not found. Failed <<<<
Checking for libstdc++devel-3.4.3-22.1; found Not found. Failed <<<<
Checking for openmotif-21-2.1.30-11; found openmotif-2.2.3-10.RHEL4.5. Failed <<<<
Actually, these packages are already there in the OS but the higher versions. It is evident from the above messages that first it “founds” the package but due to the version conflict it says that “Not found”. All you have to do is click on the check box next to warning, it will change to User Verified or something. Now press Next and follow the same steps that we followed for Update 3.

The quicker way is to use sofware only method to install 10204 oms and dirctly use 10203 datbase directly as a oms repository.
Check the section Installing 'Software-Only' and Configuring Later
http://download.oracle.com/docs/cd/B16240_01/doc/install.102/e10953/installing_em.htm#CCHGBDCB

Error while installing OEM Grid Control

I am getting error while installing OEM Grid control (with existing database) at OMS Configuration. So, I cancelled the installation and deleted all databases and started the instal again. I am still getting an error at OMS configuration.
I am trying to read through the threads here to see if anyone has solved it. I see a lot of threads on this topic but not sure how you guys resolved it.
Can anyone help here.
In the oracle installer, I see the message : The c:\oraclehomes\agent10g\cfgtoollogs\configToolfailedCommands" script contains all commans that failed, were skipped or cancelled ....
--in this file, all I see is:
rem Copyright (C)1999, 2006 Oracle
oracle.sysman.emcp.agent.AgentPlugIn
How should I proceed
Thanks
Ramya
Edited by: Ramya Reddy on Mar 9, 2009 5:25 PM

go to AOh\bin and run agentca -f and check agent status

Installing of Grid Control failed at Repository Creation Assistant

I have a "clean" Windows Server 2003 machine (formatted hard disk, installed the OS and applied all service pack and critical system updates). I was trying to install Oracle Grid Control 10.1 for Windows.
Everything went OK until it reached the "Configuration Assistants" step. The "Enterprise Manager Repository Creation Assistant" step was failed. I looked into the log file and saw messages like this:
-------------------- (start) -------------------------
"'stty' is not recognized as an internal or external command,
operable program or batch file."
Getting temporary tablespace from database...
Could not connect to SYS/(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=76.44.2.169)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=emrep.44.2.169))): ORA-12541: TNS:no listener (DBD ERROR: OCIServerAttach)
Repository Creation Failed
Repository Creation Assistant Failed
-------------------- (end) -------------------------
This got me puzzled. What problem could this be?
I realized that I was using DHCP, and I am now in the process of installing a loopback network adapter. But is there any other area I should check too?
Deecay

This ierror mean listener is not running ,start the listener and try again.

Installing OEM Grid Control not complete?

Hi,
I've installed OEM Grid Control on Solaris 5.10
Enterprise Manager 10g Grid Control Release 2 (v10.2.x)
Full Installers (Agent, Repository, OMS, and Management Packs)
from link
but no OMS ha been installed.
I had no choice during the installation process to mark it as well as other components like: Agent, Repository.
Is it not enough to use Disk1/.../runInstaller ???
Can anybody advice me how to install it completely (without patches, they blur the process to me, at present)
?

Yes, that should be enough. After that you have to choose one of the 2 choices and click next
1) Enterprise manager 10g grid control using new database
2) Enterprise manager 10g grid control using existing database.
Thanks,
Tarun

How to install the ActiveX control

hi Can some one help and tell how to install the ActiveX control.
Thanks

ActiveX runs on Internet Explorer. Which in turn only runs on Windows computers.
So NO, we can't.

How to install oracle10g grid control on windows

Similar Messages

Maybe you are looking for