How to Install oracle11g R2 in solaris 10

Hi,
Can anyone help me to install to oracle 11g Release 2 in Solaris 10.
I tried to install and got error "Xlib: connection to ":2.0" refused by server
Xlib: Client is not authorized to connect to Server".
Please provide me the steps to install oracle 11g or any user guide.
Initial parameters and GUI used for installation are little bit confused for me.
I am using vnc server to install oracle 11g. It can be done through vnc?
Thanks,
Dhanya

HI Dhanya,
Welcome 2 Oracle Forums :)
I suggest you to use Xmanager software to have a GUI console.
Set the proper display variable.
Refer my post:
http://appsdbaworkshop.blogspot.com/2010/05/oracle-11gr2-installation-on-sun.html
Hope helps :)
thanks,
X A H E E R

Similar Messages

  • How to install lan card in solaris 11

    Hi,
    can some one please tell me how to install lan card in solaris nevada snv_55b X86, 5.11
    When i do ifconfig -a it only displays loop back driver only
    lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
    inet 127.0.0.1 netmask ff000000
    The other driver was missing can please some one tell me how to install that?

    Well, the lan card has to be one that is supported by Solaris and you need to have the proper driver installed before you'll be able to get it running. A good starting point would be to look at the Solaris Hardware Compatability List (HCL) at:
    http://www.oracle.com/webfolder/technetwork/hcl/index.html
    There is a blue box which says "Check out the X86 device list" which may be a good place to start. You won't be able to pick out Solaris version you're running for the OS type menu but if you can find the device anywhere you should at least be able to determine which driver it uses so you can check that against your system. If you don't have the driver package installed, you'll have to install it before you can see the device. If course, if the device isn't supported you're stuck. At least the HCL can help you select a new interface card which should work.

  • How to installed java comm in solaris

    I have installed borland jbuilder5 enterprise edition,and
    put the libSolarisSerialParallel.so in LD_LIBRARY_PATH
    (LD_LIBRARY_PATH=/usr/lib), the comm.jar in jre\lib\,javax.comm.properties in jre\lib .
    But when I Open the serial port, the program always raise a exception "null".
    What can i do ?

    sorry :
    how to "installed" java comm in solaris
    --->
    how to install java comm in solaris

  • How to install OpenGL files on Solaris 10

    I found OpenGL stuff is missing from the Solaris 10 system when I installed gtkglext from its source code and got an error after the 'configure' command.
    bash-3.00$ ./configure
    checking GL/glx.h usability... no
    checking GL/glx.h presence... no
    checking for GL/glx.h... no
    configure: error: Cannot find GLX header
    I remember that for software groups during Solaris 10 installation, I did choose the Entire Solaris Software Group to guarantee the developement packages are installed. Could you give some help on how to install opengl stuff from Solaris 10 installation disks?

    It's hard to believe that no one here (official Sun
    developer network) can answer my question. Maybe few
    people develop under Solaris.That must be it.

  • How to install puppet agent on solaris 10 sparc

    I would like to know how to install and configure puppet on solaris 10 sprc

    Proxy configurations are most often done within the application software that needs that function and not necessarily done in the OS.   That permits you to make very specific settings and not just generic global settings that could conflict with other software.
    Can you tell us what research you have done on the topic? 
    For example, have you glanced through a Google search on "solaris web proxy" ?
    If you are hoping to use a specific web server application your forum post might be better placed in a forum space for that software instead of in a general OS forum space.   What application software will you be using?

  • How to install NetBeans6.5 in Solaris

    Hi All,
    I am new to the forum and this is my first question. I have installed NetBeans 6.5 in windows system. But my source code is in Solaris can be accessed using clearCase vobs.I have two questions to ask:-
    1. How to install NetBeans 6.5 in Solaris
    2. How to access source code from clearCase vobs to NetBeans
    Hope to get a proper solution from the forum as this is urgent.
    Thanks in advance,

    Sorry, a first generation iPod Touch can not be upgraded beyond 3.1.3.

  • How to install Oracle 10g on Solaris 10 non-global zone.

    Hi,
    I want to install Oracle 10g on Solaris non global zone with ASM.
    I need complete doc for doing the same.
    REgards
    S.Ali

    Check Oracle® Database Installation Guide 10g Release 2 (10.2) for Solaris Operating System.

  • How to install .ttf fonts in Solaris 10 x86 10/08 ?

    Hi,
    I have installed Solaris 10 x86 10/08 on my Pentium-II machine. It is working fine. I am using Java Desktop Session 3 (JDS3).
    I have to install a few true type fonts (.ttf) to the machine and make it accessible in the gnome-terminal. I have the font files, that is .ttf files, in my system, but they are not installed.
    Could you please give me the procedure to achieve this? Should I install any patches for this?
    Regards,
    Sreeram

    Hello Lubos Kocman,
    Thanks for your reply. I followed your suggestion and put the .ttf fonts in the /usr/X11/lib/X11/fonts/TrueType directory and rebooted the system.
    [Actually, you had mentioned to put them in /usr/X11/lib/X11/fonts/TTF directory. But I did not find the TTF directory. Instead I found TrueType directory and so I felt it appropriate to place them here.]
    But still I am unable to access and choose those fonts from my gnome-terminal's font list. Have I missed something? The same result was obtained when I placed the fonts in the ~/.fonts directory also. Please guide me if I am doing something wrong.
    How do we ensure that the system has recognised the fonts which have been installed newly? Any commands to confirm this? Are there any log files pertaining to fonts, where we can know whether the fonts were recognised by the system, and if not recognised, the reason for the same?
    Also, I would like to paste the contents of /etc/release of my system:
    Solaris 10 10/08 s10x_u6wos_07b X86
    Copyright 2008 Sun Microsystems, Inc. All Rights Reserved.
    Use is subject to license terms.
    Assembled 27 October 2008
    Should I install any patches to this version of Solaris 10 to get the .ttf fonts installed. As mentioned earlier, I am using Java Desktop System, Release 3 desktop.
    Kindly guide me in installing/accessing the .ttf fonts.
    Regards,
    Sreeram

  • How to install 3c905c NIC in Solaris 8 in SPARC platform

    i bought a 3c905c NIC. I want to install it into SUN Blade 100 (SPARC platform) Solaris 8. I do need help how can I configure this NIC?tks.

    From what I have seen the SPARC based systems don't have drivers for anything other than Sun hardware. I am presently working on a 3C90x and Intel Pro/100 driver for the Ultra Sparc series.
    James

  • How to install external modem on Solaris 10 x86

    hi guys,
    need to have my latest USR Courier V.Everything external modem installed under Solaris 10 x86 for using with Hylafax as a fax.
    the question is how do i actually install it? tried googling, but found it a little difficult to find anything on the subject.
    pls advise
    many thanks!

    Rather than explaining it all here go to this URL ...
    http://www.sunhelp.org/unix-serial-port-resources/

  • How to install NIC driver on Solaris 10?

    I see the driver for my NIC, the D-Link DFE-530TX+ at this site
    http://homepage2.nifty.com/mrym3/taiyodo/eng/
    It talked about this NIC on choice #4, but how do I go about installing the driver rf-1.1.0.tar.gz on Solaris 10 x86 to make this NIC work? Thanks.

    if it was choice number 4, then choose it.
    other wise check out D-link site for unix/linux advice. maybe, I'm just a newbie myself.

  • How to Install OBIEE in Sun Solaris 64 Bit OS?

    Dear All,
    Is any one can help me with screen shot on Installation of OBIEE in Sun Solaris 64 Bit (version 10) OS. OBIEE Version 10.1.3.4
    Also required a check list of Pre-Installation mandate requirements.
    Thanks & Regards
    OBIEE Functional Consultant

    OBIEE documentation: http://download.oracle.com/docs/cd/E10415_01/doc/nav/portal_1.htm where you can find the System Requirements and Supported Platforms guide and the installation guide.
    Regarding screen shots: http://catb.org/esr/faqs/smart-questions.html#homework
    PS: I wouldn't call myself an "OBIEE Consultant" if I couldn't find the OBIEE documentation or needed screen shots to install OBIEE.

  • How to install weblogic server at solaris

    Hi there
    Sorry if this is not the right place to post this messages.
    I download server702_solaris.bin for my sun-blade-100 box. My solaris version is 5.9.
    When I run the following at cmd line with root
    sh server702_solaris.bin -i console
    I got syntax error at line 1 '(' unexpected
    Thanks for advance!
    xiaohua wan

    When all else fails, read the manual! The method changed from 6.1 to 7.0.
    http://edocs.bea.com/platform/docs70/install/index.html
    http://edocs.bea.com/platform/docs70/install/index.html
    ./filename.bin -mode=console
    Don't worry, I made the same mistake when I started with 7.0.
    Wayne Scott
    xiaohuawan wrote:
    Hi there
    Sorry if this is not the right place to post this messages.
    I download server702_solaris.bin for my sun-blade-100 box. My solaris version is 5.9.
    When I run the following at cmd line with root
    sh server702_solaris.bin -i console
    I got syntax error at line 1 '(' unexpected
    Thanks for advance!
    xiaohua wan

  • How to install printer and modem in solaris

    Please send me detailed installation information about how to install a serial or aparallel printer on solaris 7 and 8 and also how to install the modem on solaris 7 and 8.pls send me some docs,informations etc.

    Solaris 8 includes an "answerbook" CDROM that explains this
    in great detail. Look in the <tt>Solaris 8 System Administrator Collection</tt> �
    <tt>System Administration Guide, Volume 2</tt>.
    You can also read the answerbook documentation online on
    http://docs.sun.com.

  • How to install TOP command

    Can anyone guide me how to install TOP command in solaris 10, 64bit OS?
    thanks

    top is not a native Solaris command but the Solaris 10 3.5.1 top package is available for SPARC & X86 on:
    http://sunfreeware.com/
    It may also be on one of your numerous Solaris 10 CD's. Which one? I haven't a clue.

Maybe you are looking for

  • Sql query taking too long to run

    I am not sure what to do. My app takes two long to run and the reason is right in front of me, but again, I don't know what to do or where to go. (VB.Net VS 2005) The main part of my query takes about 15 to 20 seconds to run. When I tack on this othe

  • How to start a RAID 5 rebuild (Mac Pro Lion)?

    Dear community, does anyone know a solution for the following problem? Mac Pro (2011) with hardware raid and four drives (2TB) configured as raid 5 raidset (named RS1). Raid controller lost connection to the drive in bay 3 but could reconnect after a

  • MackBook Air 13" and Samsung SyncMaster TA550 Monitor

    I have MacBook Air 13" and I try to set up Samsung TA550 27" monitor to work with it. Now my MacBook does not want to use the requested (by Samsung) resolution 1920 x 1080 but only pushes lower resolutions. How can get this solved? I connect it with

  • VGA Monitor Issue

    has anyone had a problem with VGA monitor with late 2011 MacBook Pro running Lion?

  • Purchase Orders without Confirmations from the Vendor

    Hi , I want to know which PO and items have no confirmations ( acknowledgments from vendor ) . How can I do this ? Thank you in advance. Best Regards.