How to install Oracle7 on Windows 2000 Pro??

Hello all,
I got the following message when install Oracle7 on Windows 2000 Pro.
"oback.vrf(379) OS_ERROR while getting service status portmap"
How to solve it?? Thank you.

Oracle7 ???!!
Really you need that (so old) version ? Reason ?
Anyway, see if Re: Oracle 7 on a Pentium 4 may be of some help.

Similar Messages

How to install 10g on windows 2000

Hello
Please guide me step by step as how to install 10g on windows 2000 .
I am a beginner and I want to install this setup in my office.At present we are using oracle8i on windows 2000.We want to do a fresh installation in a new setup and hence for the time being we are not going for upgrade or migration from 8i
Please guide me .
Thanks in advance.

Just follow the installation guide, that's all you need,
http://download.oracle.com/docs/cd/B19306_01/install.102/b14316/toc.htm
Make sure install Oracle 10g into different ORACLE_HOME than 8i

How to Install OPS on Windows 2000 Advance Server??

I just try to install Oracle Parallel Server on Win 2000 Advance
server, but it seems that the installation is not success.
I am using 2 Compaq Proliant ML530 PIII/Xeon as a hardware and
Windows 2000 Advance Server for Operating System.From the
vendor's tools checking, it stated thad clustering service is
already installed (ok!)
When I install Oracle Parallel Server, the default drive for
installation is already drive V (share disk), and Oracle
Parallel Server has been selected on the available product
components page, but I don't see node selection for install.
(According to Installing and Creating an Oracle Parallel Server
Database manual, I must select the nodes to which I want to
install the software from cluster node selection screen page)
Also when creating database (using Oracle database configuration
assistant), it does not displays database creation selection
(OPS or single instance configuration)as the first page, but
directly go to the second page (create/delete database).
Is the problem caused by wrong step of oracle Installation or OS
itself (ie: Cluster Manager)??
Anybody have experience on it can help me?
ps:I am using Oracle 8.1.7
Regards,
Suryanto

Please check whether you have installed the OSD layer (
Operating system dependent layer). Such layer can be obtained
from your hardware vendor ( eg compaq). You should have such
layer in your system before installing the OPS.
If you have such layer installed, you can see other nodes during
installation of Oracle and OPS.
Hope this help!

How do I get firefox to display images clearly? I've got Windows 2000 Pro and Firefox 3.6.6. Internet Explorer shows images clearly, so I'm sure I have the correct graphics driver. Do I need a plugin or add-on of some sort? When I go to "updates", it

When I use Firefox the images and logos don't show up clearly/correctly. I'm using Windows 2000 Pro. and just installed Firefox 3.6.6. I'm sure I have the right graphics driver as I'm able to see the images and logos clearly in Internet Explorer. I only have the "default plugin 1.0.0.15" installed. I'm thinking that I'm missing a plugin or add-on of some sort, but I'm not sure which one(s). When I go to "updates" it says there were no updates available. When I go to "Add-ons" it gives a list of Add-ons but I'm not sure which would help my issue. Any help would be appreciated.:)
== This happened ==
Every time Firefox opened
== I decided to Download and Use Firefox on this computer. I was using IE before, and it works fine. ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.99 Safari/533.4

Firefox works fine on Windows 2000 SP4 for me.
Any chance you have a dial-up connection that uses a web accelerator to speed the loading of content?

Installing iTunes 7.4 on Windows 2000 Pro

Can iTunes 7.4 be installed on Windows 2000 Pro? Will it work if I try it? Thanks.

No. More info is here:
iTunes reports that "This iTunes installer requires that your computer is running Windows XP or Windows Vista".

Unable to install Oracle 8.1.6 in Windows 2000 Pro SP4

I try install Oracle 8.1.6 in my Pentium 3 machine run on Windows 2000 Pro with Service Pack 4. In the process of initializing the database I get the error "ORA-12638: Credential retrieval failed." Please help. thank you

connect with administrator user of operting system
then start installation of oracle
kuljeet pal singh

Can The 8520 Be Installed On A Computer Running Windows 2000 Pro SP4

Hi Guys,
I have a client running Windows 2000 Pro (old habits die hard) and she just purchased the 8520. Upon putting the supplied disk in to install everything (Desktops, drivers, etc.) I get the error stating it needs a minimun of XP to run. Can I go back to a previous version of the desktop manager and grab the drivers for the 8520 to make this work? Any help is appreciated.
Thanks,
Marc

FWIW -- see this KB for PIM compatibility with various DTM versions:
KB12268 Applications supported by BlackBerry Desktop Manager for synchronization
I'd advise the most recent version that is compatible with the necessary PIM.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Is the JDK (1.2.2) compatible with Windows 2000 Pro?

Hi Friends!,
It seems that the JDK - Version: 1.2.2 - is not
compatible with Windows 2000 Pro. I know
how to configure the kit in this operating system
even if I'am not able to understand the reason for which
I receive the error in the Command Prompt window - the JAVAC
utility says:
"Can't read: BigDebt.java - 1 error".
I have added the following command line from
the System Control Panel->System->Environment->System Variables:
C:\jdk1.2.2\bin ( where I have installed the kit ).
I also have added the CLASSPATH command line there:
set CLASSPATH=.;C:\jdk1.2.2\lib\tools.jar but the problem persists
and I'am unable to create the BigDebt.class file.
To avoid another nervous wreck please send me the instructions
to configure correctly the JDK (1.2.2) for Windows 2000 Pro.
Thanks.
Julian Jerman - from Italy.

when you runs the java compiler like this
javac BigDebt.java
You need to be in the directory of your BigDebt.java file located.
BTW, it is kind of weird that your java file is saved to System32 directory, there is no benefit doing that.
--lichu

Problem Installing 817 on Windows 2000 with RAID Array

I am having a problem installing Oracle under windows 2000 which has 2 x 60 GB discs configured in RAID array. When I run the setup program the cursor goes busy for about 10 seconds and returns back to normal and nothing happens !. No errors nothing.
However when I run the Object Manager in the ods_preinstall directory it starts but in the log file I get the following error message:-
02/14/02 09:46:18 : (892) : Error in IO Control call for disk PhysicalDrive0 (Error 21)
02/14/02 09:46:19 : (892) : The count = 28
02/14/02 09:46:19 : (892) : The signature is 0x443aa035
02/14/02 09:46:19 : (892) : Error: First Partition of the disk must be an extended disk
02/14/02 09:46:19 : (892) : Found the partition: 7
Any idea whats happening....? Has anyone seen this before. Do I need to do something special in teh RAID..?
TIA
Martin

Here are some possible solutions:
1. The installation notes state that you must be logged on as Administrator to be able to install 9i. Are you logged on as the Administrator? Being logged on as user01 with Administrator priviledges isn't the same as Administrator.
2. Is the disk full? If I remember my installation correctly, I needed 3 times the size of the files. The documentation will tell you how much space you need.
Hope these two questions help
Regards,
Michael

How to install RAC on windows

Can anyone tell me step by step how to install RAC on windows advanced server. I want to know whether RAC must need Microsoft Clust Service. When I create a cluster with clustersetup.exe, I'm told that it's need oracle partition, but I don't know how to make it.
thanks advance!

Hi, I am Nirmal ([email protected]) Please try this out
Requirements:
H/W: External shared hdd
RAM: 256 MB
OS:win Advance server ,win 2000
PATCH:
The Windows CFS and Clusterware Patch for 9.2.0.6 -- available in Metalink under Patch number 3973928
The 2.2.0.18.0 Oracle Universal Installer -- available in Metalink under Patch number 2878462
The 9.2.0.6 RDBMS patchset -- available in Metalink under Patch number 3948480
1.Install shared disk array.
2.Install cluster interconnect and public Network hardware
a)Create two entries of NIC-Ensure Public IP listed at the top and private IP should be listed below the public IP.
b)Inter connection between two nodes are connected by switch.
3.Ensure the IP/Hostname of all node is entered in hosts file.
4.Ensure the temp /tmp directories are same accross all node.
5.Ensure that all nodes have same local admin name which has full access on the oracle home drive and win home drive.
6.Run the final clustercheck which is available in patch 3973928 which will check the above process if any incorrect it will indicate.(Location is 3973928\Disk1\preinstall_rac\clustercheck subdirectory).
7.Prepare the Logical Drives in Windows dont format or give any drive letter.
8.Install and Configure Cluster software with RAW Datafile.
a)Install oracle home on NTFS partitions and Datafile on Shared Logical Partition.
9.Run Oracle cluster setup wizard.
a)Click clustersetup command line.
b)A welcome page launches click next.
c)Create a cluster. click next.
d)Choose "user private network for interconnect" and click Next.
e)Network config page appears, enter the cluster name. then enter the public hostname for all nodes. Accept the default or change as appropriate for your cluster configuration. click next.
f)Cluster file system option page appears. Choose No Cfs. click next.
g)Disk config page appears. Click "Create Oracle Symbolic links button" label as srvcfg to the partition we have created.
h)Oracle Object link Manage window appears:
     1)From symbolic Link column, select an empty row.
     2)Type in the desired datafile link name and hit enter to save
     3)click apply button to commit.
     4)When the progress bar at the bottom of the screen stops      moving choose close.
i)VIA Detection screen appears. Choose yes or no depending on your config.(VIA-Virtual Interface Architecture).
j)Install location screen appears. its default win_home\system32\osd9i accept .click finish.
k)Cluster setup window appears if no error it will complete and close automatically.
l)Check the serices,
     1.oracleobjectservice
     2.oracleCMService9i
(if any error check the error log)
10.Install the 22018 OUI
a)home oracle_home.
b)Click all nodes and install.
11.If necessary install RDBMS Software into oracle home.
RAC Database using DBCA::
a)Create listeners using Net configuration assistant on each node
b)Run DBCA from command prompt.
c)Welcome page displays with the selection to create a cluster or
single instance database. choose oracle cluster database. next
d)Operation page is displayed. choose create database. Next.
e)Node selection page. Select all nodes. Next.check OracleGSDService
is running on all nodes.
f)Database Templates page is displayed. Choose new database. next.
g)Database Identification page. Enter the Global Database name and
SID (oracle will register SID prefix with a number, this will
become the SID of each node.)
h)Option page for java and inter media database. Choose according to
your need.
i)Connection option select dedicated or shared server .
j)Initialization parameter page. Add required values.
k)Database storage window.(ensure the storage information points to
the symbolic links specified in cluster.)
l)Creation page displayed, click finish.
m)DBCA summary page click create database and ok.
Note:
1)During Java creation it may slow down or hang. Check the CPU
usage and at 95-99% it will slow down please wait check the log.
2)ORA-29807 error may come. Ignore it its a (bug 2925665).
3)alter installation run the script prvtxml.plb, utlrp.sql
4)Any other error please check the alert log.
Message was edited by:
user474717

Trouble installing XP on Windows 2000 Thinkpad T43

I am trying to load XP pro, on a Thinkpad T43(2668). It was previously on this system. Currently the system has windows 2000 pro. When installing XP disc, the disc will not load. The bios is set load CD priority. I tried formatting, and deleting, and recreating the active partition, in Windows 2000 recovery. Also tried installing Xp pro disk, on clean system (no OS). Nothing works, CD, installation stalls and we get error messages
Error messages: i386/vga.oem, i386/ntkrnlmp.exe , blank screen, inf file txtesetup.sif corrupt or missing, are all errors I have gotten. Different error messages with each attempt at installation. Also have gotten “At: press any key to boot from CD”, no response.
I ran a RAM test on this system for 12 hours, and there are no errors.
This XP pro CD loads in other PC’s, no problem.
Any ideas?
Thanks
BA

You're looking at a bad media drive, or a bad disk itself, regardless of the fact that it loads on other units it may still be partially defective.
Try borrowing another media drive or using an USB CD-ROM to load the OS.
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

I am trying to install CS3 on Windows 8 and keep getting a message saying "the serial number I entered is not valid please enter it again" Does anyone know how to install successfully on Windows 8?

I am trying to install CS3 on Windows 8 and keep getting a message saying "the serial number I entered is not valid please enter it again" Does anyone know how to install successfully on Windows 8?

CS3 is unsupported under Windows 8. That said, you'll need to contact Adobe
directly for serial number issues.

How to install itune under Windows XP 64-bit professional with SP2?

I have iPhone 3GS for over a year and I have set it up at my work computer (Windows XP professional) with latest iTune and it work great. Recently our IT has upgraded our system and all of our new machines has Windows XP 64-bit OS.
I can't figure out how to install iTune under Windows XP 64-bit, to synch with my e-mail, contact and calendars any more?
Can any one help?

New machines? With XP 64-bit? Your IT department is being rather foolish, in my opinion, deploying new installations of XP 64 since Microsoft discontinued mainstream support for it (more than two years ago) and it's never really been satisfactory.
Anyway, there is no version of iTunes that supports the 64-bit version of Windows XP and almost certainly never will be. If you search the iTunes for Windows forums for "XP 64" you'll find threads describing the process some people have used to "crowbar" iTunes onto XP 64, with varying levels of success, none of them complete. Connecting to iPhones is one of the most problematic issues.
Regards.

How to install acrobat in windows 7 ?

please help how to install acrobat in windows 7 ? when i install mobile spy software web account in my pc there is update massage about acrobat.
thanks

Hi,
Is Acrobat already installed on the machine?
Please share the screen shot of the error/warning message.
Regards,
Anand

How to set ORACLE_HOMES on Windows 2000 for 11i

How to set ORACLE_HOMES on Windows 2000 for 11i
As am newbie on windows.
Its very urgent.

To set ORACLE_HOME on Windows:
C:\> set ORACLE_HOME=<location>
i.e.
C:\> set ORACLE_HOME=d:\oracle\proddb\10.2.0
To verify:
echo %ORACLE_HOME%
In Apps 11i, you do not have to set it manually, just source the environment file and this will set all environment variables for you.
- To source the application env file, run envshell.cmd under %APPL_TOP%
- To source the database env file, run <SID>_<hostname>.cmd under %RDBMS_ORACLE_HOME%

How to install Oracle7 on Windows 2000 Pro??

Similar Messages

Maybe you are looking for