How to install OS on my new Satellite P100-347?

Hi!
I just purchased a P100-347 last friday. This was the last laptop of its kind in the shop where I bought it and as so I end up with a display model.
No problems with that, the laptop is in very good condition, the only problem is that whenever they took it from the display they re-installed the operating system and so they add some password to the administrator account (which in XP is created whenever the OS is installed).
I contacted the shop to request the password and they say they dont know (or they just dont want to give it out...).
What should I do now?? Format the disk and run the Toshiba recovery cd to re-install the OS?? Is the OS included on the product recovery cd?? If I re-install the OS, can I give a new password?
Thank you.

Hello Tiago
The best thing you can do is to install OS again. For doing this please use delivered recovery DVD. Recovery DVD contains operating system, all necessary drivers and of course all Toshiba designed tools and utilities.
After doing this your notebook will have factory settings again and you can configure OS and set your own password.
If you need some assistance please write again.
Bye

Similar Messages

How to find exact motherboard model for Satellite P100-347?

Hello,
I am hoping someone could help me. I am looking for a new motherboard for my toshiba laptop as it needs replaced.
I own a pspa6e-03302cen Satellite P100-347 laptop and have not been able to find this board online anywhere. Although I have found two suppliers of many p100 motherboards they use alternate model numbers in which I cannot find anywhere in my documentation or on the actual computer. The model numbers they use are something like A000008350 or a number starting with k. I am pretty sure the supplier i have found has the motherboard i would need but i would need a list of all the alternate part numbers for my laptop or someway of finding the exact numbers. Any help on this matter is appreciated..
Thanks

To be honest I really do not believe someone here can offer you such info. As you know this info is for internal use and you can try to get this info from authorized service provider in your country. Sorry but I do not see better solution, except to wait here and hope someone can help.
Good luck!

How to install and reconfigure a new hard drive?

How to install and reconfigure a new hard drive?
I installed a new hard drive from best buy for my "vintage" MacBook laptop. When I turned on the laptop and the flashing folder appeared, I need help?
I looked online for some clues. I put in the software disk I received when I bought the disk but I cannot select a destination volume to install the software. I tired to partition the drive within disk utility but there was an input/output error. Should I just plug in my external hard drive and hope everything reboots like magic ?
Thank you for any help you can give

How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your new hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.

How to install PSCS6 on a new computer?

Viens d'acheter un nouvel ordinateur. Comment installer Photoshop CS6 sur celui-là? J'ai les numéros de série.

Thanks. Inbetween I managed to install it and it works beautifully - so far!!! - on my new computer.
Cheers,
Le 4 mars 2014 à 00:28, kglad <[email protected]> a écrit :
Re: how to install PSCS6 on a new computer?
created by kglad in Downloading, Installing, Setting Up - View the full discussion
download the installation files and install using your serial number, http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-download s.html
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6176028#6176028
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6176028#6176028
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6176028#6176028. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Downloading, Installing, Setting Up at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

How to install exisiting account with new iphone

how to install exisiting account with new iphone

What account? Have you tried following the prompts on the activation screen?

Satellite P100-347: How can I replace key caps

How and where can i replace my keycap B and V on a laptop satellite P100-347,
pls i need serious and quick help.

Hi
The keycaps replaceable and you can order such key from ASP in your country or check different online dealers who provide such keycap sets.
Google a little bit and you will find a lot offers

Satellite P100-347: Blue screen appears on start up - unable to boot volume

Recently I left my 2 younger brothers playing NFS Carbon on my satellite P100-347, preinstalled with media centre 2005 edition, and now it fails to startup.
During the startup process eventually a blue screen is displayed for about a second and then it shutsdown (I manged to make out the words "unable to boot volume" from the blue screen).
I tried booting with an XP media centre DVD but it only gives me an option of reinstalling the OS with a price of losing all my very important data. Normally I would have recovered the system but I don't want to lose my data.
Is there anything i can do other than taking it to a technician?

Hi
Well, mostly the BSOD appears due to a hardware problem or serious software issue.
In your case the software problem is possible
Unfortunately, I think the new OS installation is the best way to get the notebook running correctly.
Now you want to know how to save the data and files well, I think you should remove the HDD from notebook and should try to connect the 2.5 HDD via external USB controller to another computer. Then you could save the files on the other HDD
I think, now you know that the regular backups are important and necessary!!!!

Satellite P100-347 - problem with shutdown during gameplay

i have a problem with my Satellite P100-347(pspa6e)
After about 10 minutes playtime with games like battlefield 2, the SIMS2 and so on.. my pc shuts down...
I suspected it was shutting down because of high gpu or cpu temp...
i could feel that my notebook was hot, but after playing for a while its normal...
so i installed HWmonitor to check my gpu,cpu and hdd temp...
this is what i shows:
THRM: 61.C - 141.F
CPU: core0\1 - both 64.C - 147.F
GPU: runs at stable 85 - 90.C
this at normal use...not games....
HDD: 39.C
Something has to be wrong!! gpu temp has to be too high?!?
i have tried a fresh OS install....
thnx for all answers and help!

Hello
I agree with Akuma. The fact is that suddenly shutdowns are mostly caused by too high temperature and shutdown is actually reaction for ??hardware protection??.
So what you should do is to clean up the cooling grill.
There is just one problem: if this should be done properly the notebook must be disassembled. So the question is how you want to do this?
At the moment, try to place your notebook on higher position, maybe on 4 books to make more distance between the notebook and the desk. I just hope the air circulation will be better and you will be able to play a little bit longer. Please test it and let us know what will happen.

Satellite P100-347: Blue Leds - Can they be disabled/switched off?

I have read several topics in the forum about the P100 Harman/Kardon Speaker Blue LEDs/lights. None have expressed a final answer about how to switch off the LEDs.
I was wondering if any new update on this issue has occured. The last forum post about it was in February. Is it possible to switch off these annoying lights in the newer Satellite models? I would be willing to disconnect the leads if its an easy job.
My laptop is the Satellite P100-347 (SPA6E)
Thanks a lot

Hi Dan
Did you use the forum Advanced search???
I dont think so!!!
I used it and found several threads about this theme.
I searched in the Satellite P section for blue light and find these postings:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=16008&messageID=58569
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=19701&messageID=72256
So why to post something which was already discussed here in the forum?!

Instant shutdown and reboot on Satellite P100-347

My satellite P100-347 keeps shutting down instantly then restarting. Any solutions becuase its still new and very expensive for a replacement.

Hi there,
it seems your machine is overheating and then it makes a shutdown because of hardware security reasons.
You said it happened when playing NFS carbon, this is a good sign for a heat problem of cpu/vga.
I suggest you to clean your fan and your cooling system, because when its clobbed with dust the system can not be properly cooled and it has to shutdown to prevent severe damage to your precious hardware. Just take a can with compressed air and clean your cooling system (but be gently, otherwise you will damage the fan which transport the air which is heated from cpu/vga)
Just a question: which drivers are installed for your vga? Do you have the original toshiba display drivers? If not, then the problem is self explaining because the timings of the original drivers from nvidia/ati are not suitable for mobile computers.
Greets

DVD drive does not burn/erase rewritables - Satellite P100-347

Hello,
I have purchased a Toshiba Satellite p100-347 PSPA6E laptop. It has a DVD Burner with model number: HL-DT-ST DVDRAM GMA-4082N (firmware pt06). It has capabilities to burn all types of dvds (please see example using dvdino: http://tinyurl.com/2hbpqv ).
However, i cannot rewrite on my Maxell dvd+rw (1.4x speed) dvd. everytime i go to a software application to erase a dvd i've written on, it says format not recognised. For example Nero says "This disc is not rewritable and therefore cannot be erased. Please insert a rewritable disc".
The disc is rewritable because it says on the cover and also it burns on my friends rewritable dvd burner :(
Please can someone help :( i am really stuck and it would be much apreciated
Jas

Hello all,
thank you for your replies. Still no luck wth DLA :(. i installed DLA and i get the message 'write-once media such as CD-R or DVD-R is not supported by DLA' even though the dvd is a MAXELL Dvd+RW.
Now here is the strange part. I just borrowed a friends dvd external rewriter which burns the maxell dvd i have been using... it seems like that does not work on my laptop either now and works fine on my friends computer. perhaps it is not the dvd burner that is the problem but some setting on my pc. can someone please help :(.
JAs

On my Satellite P100-347 cooling fan runs all the time

Hi,
I think I might have a problem with fan on my Satellite P100-347. It seems to be continually working at all times and is a lot louder than when I purchased the computer. Initially it used to just switch off and on when required, I think this might now be wrong.
Please help.

Hi Beata
I agree with Sanremo suggestions; its not known to me how old your notebook is but from time to time its necessary to clean the cooling fans. The dust and debris inside the notebook could prevent the cooling modules from properly working!
The properly fresh air circulation is also very important. Be sure that there is enough free space around the notebook. Do not use the notebook on the knees or in the bed. In such case the notebook cannot be cooled in the right way and the high temperature can damage some parts like GPU on the board.
But if you think there is an serious hardware problem you should contact the authorized service provider in your country.
Good luck and greetings to Poland ;)

Satellite P100-347 - nVidia drivers up to date?

Can Toshiba support please fix some up to date vista drivers for:
Satellite P100-347...(pspa6e)
this should be up to date at Toshiba`s homepage, because the drivers on
nvidia.com don`t work on my Toshiba notebook....
Thnx

It is well known that drivers downloaded from graphic card manufacturers support pages cannot be installed on mobile computers. Every notebook manufacturer must be sure that display driver will work well on specific notebook model and will not force graphic card to run on maximum level.
I hope you can understand why notebook manufacturers do this.
Anyway you can just hope that your message will be read by Toshiba support department. ;)

Cannot find Windows Vista 32bit Drivers for my Satellite P100-347

Hi,
I did a fresh installation of Vista Ultimate 32-bit on my Satellite P100-347 and on going to the driver download page, the vista drivers are no longer there!
Unfortunately without those drivers the laptop's performance isn't optimum. Does this mean Toshiba doesn't support my laptop model anymore? I hope not!
Could someone please point me in the correct direction!

Someone posted, that it may be server maintenance. I found a couple of posts asking for the same.

How to install second hard drive in Satellite A200-1BW?

I see my new Satellite A200-1BW has two hard drive bays,on looking into the second bay I cannot see how a second drive can be fitted as the plug in socket appears to be missing.
What parts do i need to fit to fit a second drive as they are held in stock by my local computer outlet and are quite cheap,can anybody advise me on part numbers etc of the bits I need.
Thanks
Steve

Hi,
there are many different models of your machine on the market and some of them have a second drive, some of them not. If you bought a model with one drive then you will only be able to install ONE drive because your model was only intended to have one drive.
And even if you solder a connector to it or attach it in any other way then you dont know if the bios supports the second drive.
My suggestion on it: obtain a USB-HDD and store your data on that drive. Would be making more sense then spending a lot of time on investigation to find out that your mainboard is not able to handle a second drive.
Cheers

How to install OS on my new Satellite P100-347?

Similar Messages

Maybe you are looking for