How to install OS on only C with USB media deployment

I have one hard drive with four partitions.The 1st one is OS.
There is an error shows "Unable to determine destination disk" with USB deployment.
And also the error comes out when there is a USB drive plug in during Network deployment.
But it works fine when there is no any USB drive plug in during Network deployment.
Anyone has a clue or a solution?
Somebody help Me out?
please

It appears that you are attempting to re-write major sections of MDT from scratch.
The LTIApply.wsf script is attempting to locate the correct partition. In a multi-disk and/or multi-partition scenario, this is difficult because LTIApply does not know by-itself where to find the partition. Instead it looks in some pre-defined variables
for hints on where to place the OS, hints placed by ZTIDiskPart.wsf and others.
In this case you have removed ZTIDiskPart.wsf so the variables are not present.
ZTIUtility.vbs --> GetOSTargetDriveLetterEx() is the function used to determine the target, and you can see what variables are queried there.
My recommendation is to use the default ZTIDiskPart.wsf script.
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

Similar Messages

How to Install crystal run time programs with out designer.

Can anyone suggest me how to install crystal run time program with out installing entire designer software.
Is it coming along with CR software package, which we have to do custom install or is it coming as a different package.
Currently my client is using only the run time programs to trigger crystal report from VB app but developers have installed entire software for development. We need to figure out how this install can be done, as it was done long time before and folks who have done it left the company.
Any suggestion on this would be of great help to me.

See this wiki:
https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsforVisualStudio.NETRuntimeDistribution-Versions9.1to12.0
Ludek

How to install Windows XP in parallel with Mac OS on a Macbook?

Can anyone tell me how to install Windows XP in parallel with Mac OS on a Macbook?
If I divide the hard drive into 2 patritions and install Win XP & Mac OS on each patrition, is it ok?

I don't think he meant "Parallels", I think he just meant "parallel", with a little 'p'.
There are three options for running Windows software on an Intel-based Mac:
Virtualization: you can install software such as Parallels or VMWare (along with a licensed copy of Windows) which will emulate the environment necessary to run Windows software. Performance is significantly degraded, but you can work with both Windows and Mac software simultaneously.
Dual boot: You can use Apple's Bootcamp to partition your drive and create a CD of Windows drivers for your devices, so that you can then install Windows on one partition of your drive. Your Windows software will run just as it does on any other Windows PC, but you have to reboot to switch between Windows and OS X.
Crossover: Crossover is a product that allows you to run Windows programs in OS X without installing Windows. Not all Windows software will work with Crossover though.

How to install Report JDev only ?

I want to install JDev ,but my CPU is less than qualitification.
ERROR Massage:
" Checking swap space : 672 MB available ,1535 MB required. Failed<<<<"
Now,I want to use only JDev report maker. So , how I install Report JDev only?

Hi,
not sure what you mean by "Report Maker", but in general it is not possible to start a single component stand alone. You can switch off some extensions in the preferences to reduce memory requirements.
Frank

How to install a CableCARD tuner in your DIY Media Center

http://www.engadgethd.com/2009/05/12/how-to-install-a-cablecard-tuner-in-your-diy-media-center/
RAWR *
>

Check this article out
https://wiki.archlinux.org/index.php/In … ting_Linux
Note that it says it is out of date because of pacman. Really all you need to know is that pacman uses signed packages now, so it is now necessary to run the pacman-key stuff. Or set SigLevel = Never in pacman.conf
Edit: IMHO the first method is preferred because it more closely resembles a regular install. Ergo, you will be able to semi follow the beginners guide for config and such.
Last edited by WonderWoofy (2012-08-17 03:42:12)

How to transfer contacts from LGENV2 (maybe with USB)?

We recently purchased smart phones for our daughters. They were very quick to get their phones out of the boxes and activate their phones. Well, they hadn't backed up their contacts (or anything on their phones) before activating their new phones. We now can't find a way to use Backup Assistant from the old phones (all are LGENV2s). We do have the USB cable to connect the phones to our PC. We'd appreciate any help. Thanks.

Thanks. I paired them, and tried to send "namecard" (checked all the contacts), but the other device (iPhone 4s) isn't connecting. Any ideas?
Date: Tue, 25 Dec 2012 14:06:52 -0700
Subject: Re: How to transfer contacts from LGENV2 (maybe with USB)? - Re: How to transfer contacts from LGENV2 (maybe with USB)?
Re: How to transfer contacts from LGENV2 (maybe with USB)?
created by archeryhunter1993 in Basic Phones - View the full discussion
You can actually use Bluetooth to transfer contacts! Just make sure they are paired together.
>Personal info deleted<
Message was edited by: Verizon Moderator

How can I consolidate my itunes music with Windows Media Player?

How can I consolidate my itunes music with Windows Media Player?

Ah, did you move your media files by hand? Often doing so will have broken the links from iTunes to them.
The "missing file" error happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, one of its parent folders, or the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout, or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to Get Info, then click No when asked to try to locate the track. (Due to a bug in iTunes 12 you currently have to say No twice!) Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, a folder renamed, or a drive letter has changed, it should be possible to reverse the actions. If the difference between the two paths is an additional Music folder in one path then this is a layout issue. I can explain further if that is the case.
In some cases iTunes may be able to repair itself if you go through the same steps with Get Info but this time click Locate and browse to the lost track. It may then offer to attempt to automatically fix other broken links.
If another application like Windows Media Player has moved/renamed the files then the chances are that subtle differences in naming strategies will make it hard to restore the media to the precise path that iTunes is expecting. In such cases, as long as the missing files can be found somewhere, you should be able to use my FindTracks script to reconnect them to iTunes. See this post for an explanation of how it works.
tt2

How to install Win 7 on Mac using USB flash drive....???

How to install Win 7 on Mac using USB flash drive....???

clintonfrombirmingham wrote:
I thought that installation through Boot Camp required, without hacks, a physical optical disc to install Boot Camp? I don't use it any longer since I run XP under Parallels, but I would swear that you have to use a disc, and not a USB thumb drive, to install Windows?
Maybe some real Boot Campers will visit this thread...
Clinton
If you have the Media you can use it to create a bootable USB key via boot camp assistant.
It will create the usb and has the option of pre-downlading the drivers and bootcamp utilities for windows.
It is pretty much all automated and quite simple.

How to install Windows 7 on E20 with only DOS and no DVD/floppy driver?

I am considering buying the cheapest E20 - with following configurations:
ProcessorIntel Pentium G6950 Processor (2.80GHz 1066MHz 3MB) - 73W
Operating system DOS (No Software Preloaded)
Tower 4x5 Mechanical with Intel 3450 Motherboard
1GB PC3-10600 1333 MHz DDR3 SDRAM DIMM
Integrated Video
No CD/DVD/floppy
No monitor
I tried to search the internet for instructions to install Windows 7. But there is not many discussion threads. Has anyone on this forum has had experience in doing that and wants to share.
Thanks for your help.

http://technet.microsoft.com/en-us/magazine/dd535816.aspx
obviously you don't have cd drive, therefore you should follow the above instruction to install the windows 7 from a usb key.
The integrated video card should have at least a vga output, which will work with your dell monitor, provided that monitor is working.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

How to install Windows 7 on MacBook with Tiger + Leopard upgrade using Boot Camp

Hi,
I've had Vista installed on a separate partition on my MacBook for a while, but wanted to upgrade to Windows 7. I've completely wiped the HDD, re-installed Tiger, upgraded to Leopard and installed Windows 7 using boot camp from within OSX. However, I now can't boot back into OSX - I believe it's because I don't have the latest version of Boot Camp within Windows 7 (it doesn't appear on the task bar), but I also don't have a full copy of Leopard, only the upgrade disk.
Is there any way to (a) boot back into OSX (I've tried holding down the option key and this doesn't work) and (b) installing a version of Boot Camp that will enable me to switch between both operating systems as I was when Vista was installed & without having to purchase the full copy of Leopard?
Any assistance would be much appreciated.
Many thanks,
Elliot.

Try to boot from the 10.4 disk then and "Repair Disk". If you can, then try booting from the 10.5 disk and do the same.
Have you tried holding down the C key also when trying to boot from the Install disks? It could take 30 seconds to a minute or more for the C key/Option key reboots. The Mac DVD HAS to be the OS installer disk not the applications installer, etc,. Sorry if I keep bringing this up.
You have to keep holding it down the whole time it boots, either it will bypass it and reboot into Windows or it should get to the boot loader window with at least Windows showing up.
If you can still boot into Windows with no problems then Windows SHOULD show up in the boot loader window. (C key/Option key) It's hardware related, it's the computers manual way of looking for a bootable OS if there's no OS installed yet.
Don't forget to disconnect any USB devices until you get it fixed.
Also try to boot from the Windows installer disk and "Repair Windows" and see what happens.
Other then your DVD drive may be on it's last legs, I can't really think of any reason you can't boot from the Mac DVD's. All the other post's I searched for eventually got the DVD boot working, even 10.6 and 10.7 are having that issue, tho rarely.
elliotfromnewark wrote:
Hi, ...........inserting the Leopard disk once in Windows to install boot camp and it says that the version on the DVD is only compatible with XP SP2 or Vista.................
Don't run the installer this time, if a window pops up to "Run" or "Open", just open it. If it doesn't open the DVD and look for the BootCamp.exe. Right click on the .exe (or whatever it's called) and select the trouble shoot compatibility mode and select Vista. Yes, I know you have W7. See if that works.
It may have buggered the Mac OS side so you may have to get DiskWarrior (worked for some) or the like in order to fix it. It would definitely be useful in the future.

How to install the Oracle Apps R12 with an existing OAS 10g

Hi All,
I am planning to install the Oracle Apps R12 and I already downloaded the media-pack from edelivery.oracle.com.
But I am not sure how to do it because I have tree-tier architecteur at home :
One computer with LINUX OS (OEL 5.5) which hold the Oracle Database 11gR2 -- Database tier
One computer with LINUX OS (OEL 5.5) which hold the Oracle Application Server 10g ver 10.2.0 (infra and middle) -- Midel-tier
One computer with XP OS -- Client tier
Could any one explain me how to install it?
Regards,

But I am not sure how to do it because I have tree-tier architecteur at home :
One computer with LINUX OS (OEL 5.5) which hold the Oracle Database 11gR2 -- Database tier
One computer with LINUX OS (OEL 5.5) which hold the Oracle Application Server 10g ver 10.2.0 (infra and middle) -- Midel-tier
One computer with XP OS -- Client tier The above is two tier architecture (not three tier) as the client tier is not considered as a tier in Oracle Apps installation.
Could any one explain me how to install it?Do you already have a Database and Oracle AS10g installed? Please elaborate more.
Oracle Apps R12 comes with 11gR1 database, and to do multi-node installation please refer to these threads.
R12 Multinode installation
Re: R12 Multinode installation
Install oracle EBS R12 on 2 machines
Install oracle EBS R12 on 2 machines
To upgrade the database later to 11gR2, please refer to:
11gR2 11.2.0.2 Database Certified with E-Business Suite
http://blogs.oracle.com/stevenChan/2010/11/db_11gr2_11202_ebs.html
Thanks,
Hussein

How to install the JRE that comes with JME 3.0 to a Windows Mobile device

From Sun's JME download page:
Integration with 3rd party emulators and Windows Mobile devices
The new Java ME Platform SDK architecture allows integration of 3rd party emulators and devices. Java ME Platform SDK comes with Sun's Java runtime environment for Windows Mobile. A user can install this runtime on a Windows Mobile device or a Microsoft device emulator and experience all the on-device features of Java ME Platform SDK.*
My question is, how can I install the Java runtime environment that comes with Java ME Platform SDK 3.0 to a Windows Mobile device. I am a newbie in this device programming and I'm setting up my development environment. So far, I have installed JME in my computer, and have also installed both the Windows Mobile 5 and Windows Mobile 6 emulator. I've been searching the internet for answers, but it always points me to using a third party java runtime such us Mysaifu, etc. I would like to stick with what is packaged with JME if possible.
If anybody assist me or direct me to an online documentation on how to do this. All help is greatly appreciated :-)

I had some success installing on a real Mobile 5 device [http://forums.sun.com/thread.jspa?threadID=5344195]
There is a link to a doc on the main download page, item 5 under How to Install. [http://java.sun.com/javame/downloads/sdk30ea.jsp] I used this for the real device, Treo 700w. Did not try it with an emulator.
The support looks to be an emulator rather than a JVM per say. But then again I could be wrong on that. I too had poked around looking for a JVM, CrEme, J9, etc..
I do have a commercial app installed on the Treo that uses IBM's J9, which is seems requires a contact with a sales person to get ahold of. I had hoped to find something that might clue me in on how to "hook up" my own J2ME app with the J9 installed by the commercial package. But I've pretty much decided to get a real J2ME handset rather than continue to waste my time hacking up something with WM. Now the question is which one makes a good reference platform?

How to install Oracle BPEL Process Manager with the BEA WebLogic

Hi ,
I will install Oracle BPEL Process Manager with BEA WebLogic 9.2(MP2). I have download orabpel_10133_WebLogic.zip ,then Modify the following mandatory installation properties in the orabpel_10133_WebLogic\bpelDomain.properties file:
# BEA_HOME is the path where Weblogic is Installed
BEA_HOME=/opt/bea
# JAVA_HOME is the path of jdk folder inside your weblogic
JAVA_HOME=/opt/bea/jrockit90_150_10
# DOMAIN_HOME is the path where you wish to create your domain called BPELDomain
DOMAIN_HOME=/opt/bea/user_projects/domains
# APPS_HOME is the path where you wish to copy your applications and adapters that are required for oracleBPELServer
APPS_HOME=/opt/bea/user_projects/apps
# BEA_HOME is the path where BPEL PM is Installed
BPEL_HOME=/home/oracle/bpel/product/10.1.3.1/OraBPEL_1/bpel
# DRIVER_TYPE is the datasource class that installable use to create a datasources for oracleBPELServer
DRIVER_TYPE=oracle.jdbc.xa.client.OracleXADataSource
# DB_URL is the url to connect to orabpel schema
DB_URL=jdbc:oracle:thin:@16.157.134.17:1521:orcl
# DB_USER is the user Id for orabpel shema in database
DB_USER=ORABPEL
#DB_PASSWORD is the password for orabpel schema in database
DB_PASSWORD=bpel
#BPEL_SERVER_NAME is the server i.e. to be created under BPELDomain
BPEL_SERVER_NAME=oracleBPELServer
#PROXY_HOST is the Host name of the proxy server
PROXY_HOST=www-proxy.us.oracle.com
#PROXY_HOST=
#PROXY_PORT is the Port where the proxy server is running
PROXY_PORT=80
#PROXY_PORT=
#NON_PROXY_HOST is the list of non proxy hosts that are divided by a | symbol
#NON_PROXY_HOST=*.oracle.com|*.oraclecorp.com|localhost|127.0.0.1|stbbn10|stbbn10.us.oracle.com
NON_PROXY_HOST=*.oracle.com|*.oraclecorp.com|localhost|127.0.0.1|stbbn10|stbbn10.us.oracle.com|16.157.134.135
When I run the setup.sh , it will report
BUILD FAILED
/opt/software/WL_Installables/build.xml:131: Traceback (innermost last):
File "./wl_scripts/bpelDomain.py", line 22, in ?
File "./wl_scripts/createGroupsAndUsers.py", line 4, in ?
weblogic.management.utils.AlreadyExistsException: [Security:090267]Group BpelGroup
Actully ,there is no BpelGroup in Weblogic. Does anybody know how to solve it ?

MAke sure you have not set ANY environment variable related to Oracle / BEA / Java / LD_library path. Use the following script to unset / set the initial settings:
#!/bin/sh
unset ORACLE_BASE ORACLE_HOME ORACLE_SID ORACLE_TERM
unset LD_LIBRARY_PATH LD_LIBRARY_PATH_64
unset CLASSPATH JAVA_HOME
export PATH=.:/usr/sbin:/usr/bin:/usr/local/bin:/opt/VRTS/bin
export BEA_HOME=/appl/oracle/products/9.2/weblogic
Marc
http://orasoa.blogspot.com

How to install SIM on ipad mini with celluna?

i biought the t-mobil SIM start kid and do not know how to install it on my ipad mini with celluna; can some one help?

You'll need to open the sim slot as shown in Diavonex's, image. However looking into the t-Mobile Starter kit here:
http://www.t-mobile.com/cell-phones/t-mobile-sim-starter-kit.html
It seems it comes with a standard Mini sim which will be too large to fit in any iPad model. Depending on the Model of iPad they use either a Micro Sim or a Nano Sim.
You''ll likely have to get the sim card cut to the appropriate size.

HOW TO INSTALL REAL ICSr6 in Live With Walkman

Hi,
Does any body know hoe to install real ICSr6(http://forum.xda-developers.com/showthread.php?t=1707876) in LWW.
First of all i rooted my phone with the simple steps mentiond by nabeel in http://talk.sonymobile.com/thread/41119?start=0&tstart=0
After root my phone i download the real icsr6 from the xdadevelopers site and also i done the CWM mode in my phone.
then copy the realICSr6 in SDcard and reeboot it in CWM mode
then follow the steps mentioned in the site http://forum.xda-developers.com/showthread.php?t=1707876
but while installing the ICSr6 in CWM mode i stuck in one place idont know which one should i select. There is an option to instal with Locked Bootloder and Unloked boot loder.
Itried both the loked and unloked bootloder
but after installing with locked bootloder i rebooted the phone then it shows SONY logo then it get stuck in ANDROID logo then continousely restaring the phone.
With the unlocked bootloder it stuck in SONY logo. and then contionousely rebooting.
Please help me to instal the real ICSr6 with the step by step process.

Hi
I successfully installed the Real ICSr6 in my LWW.
Below i am mentioning the steps to how to install Real ICSr6, i think it may be helpfull to somebody to install this.
First of all u should root your phone, Then install the CWM mode, then fastboot the kernel, and then install the Real ICS r6 from SDcard.
How to Root LWW or Xperia 2011 series mob's.
http://talk.sonymobile.com/thread/41...art=0&tstart=0
For installing the Real ICSr6 u should unlock the bootloder. For unlocking the boot loder for Xperia 2011 series phone u should get the unlocking code from the sony mobile site (http://unlockbootloader.sonymobile.com/ ) follow this link and get the unlocking bootloder code.
For unlocking the boot loder Download the "fastboot" drivers from here. Install them accordingly.
Turn off your phone. Wait for 30 seconds. Connect your phone to the PC while keeping the volume up key pressed. Your phone's LED will lit blue (indicating fastboot mode).
Head over to the location where you kept the previously unzipped fastboot folder. Right click while keeping pressed the SHIFT key on the folder and select "Open command prompt here"
Type fastboot.exe -i 0x0fce getvar version to ensure your have entered bootloader mode (you will get version on java example, 0.3)
Type fastboot.exe -i 0x0fce oem unlock 0xKEY (replace KEY with unlock code you got from Sony's website earlier)
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! BOOTLODER IS UNLOCKED !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
then disconnect the mob from ur PC.
FLASHING KERNAL
For Installing Real ICSr6 u should use the kernal MESA(recomended), KRsH Kernel ICS, EXtended Stock Kernel
for downloading u can visit http://forum.xda-developers.com/show....php?t=1707876
After downloading this.
Open the flash tool that u earlier installed for rooting ur mobile.
Click on the lightning bolt sign and select "Fastboot mode" and click OK.
Switch off ur Mobile and press the Vol UP key and connect it ur computer. Now your phone is in fast boot mode.
Now Click on "select kernel to flash" in Flashtool.
Browse to the folder where you placed the *.img file and select it.
Flashtool will install the kernel into your phone. Disconnect your phone from the PC. Wait 30 seconds.
!!!!!!!!!!!!!!! Now successfully install the KERNEL !!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Installing The Custom ROM (Real ICSr6)
First of all copy the Real ICSr6 file in ur phones SDcard.
Then Turn your phone on. When you see the Sony or Sony Ericsson logo on the screen, keep pressing the volume down key. It will take you to the CWM recovery mode, which was installed automatically with the kernel.
Use the volume up and down keys to navigate through menu items and the Home key for selecting.
Do a full wipe (format data, system, cache, Dalvik cache and battery cache).
Choose "install from SD card" and then select "choose zip file". Select the ROM file first (MiniCMSandwich Lite Final v4).
It will take you to the very much intuitive Aroma installer, which is very easy and much like installing an operating system on your PC.
After finishing the installation, your phone will reboot. While rebooting, enter the CWM Recovery again using the volume down key.
This time, do not wipe anything. Just select "install zip from SD card" and point to the wifi modules zip file. Similarly, install the Google Apps zip file.
Turn off your phone from the CWM Recovery menu.
Turn on your phone, first boot may take a long time, do not worry.
Now you should get a pure AOSP flavor in your Xperia device.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Enjoy the New ICSr6 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Thanks to all developers XDA.
HIT HELPFUL ANSWER IF I HELP U
Message was edited by: abheesh

How to install OS on only C with USB media deployment

Similar Messages

Maybe you are looking for