How to install OSX on new SSD?

I just purchased the 2012 i5 Mac Mini and replaced the 500GB hard drive with a new 128GB Samsung 840 Pro. Built many PCs in the past, but this is my first Mac.
What are my options for installing OSX on it? When I first boot up I am greeted with a folder with a question mark in it. I hope this is typical? Also, did the SSD need to be formatted first? I just opened it up and put it in. I thought I could just hit command+r to do an internet install, but I have had no luck getting that to work with my Windows keyboard.
If at all possible, I would prefer not to have to remove the drive again since it's so cumbersome.
I don't have an external optical drive.
I do have an external hard drive.
I do have a few 8GB and 16GB flash drives.
I have an ethernet cable for internet connection.
I probably could have done a little more research before doing this, but I would greatly appreciate any help.

Finally was able to get keyboard to start disk util/internet install. When I started internet install disk was nowhere to be found. I used a SATA to USB cable to boot from the 500GB drive and formatted the SSD. Then rebooted again, and currently finishing internet install. Hope it goes well.

Similar Messages

Macbook Pro, How to transfer files to new SSD

Hi
Ordered 16GB of Ram and a 480GB SSD for my MacBook Pro 13 2.5GHz last night.
I know how to install the ram and SSD but I am kind of stumped as to how to move my files from my HDD currently in my Mac to my new ssd, I know that its possible to do it by removing the optical drive and use a hard drive caddy and move the files with an app called super duper but i could do with keeping my optical drive for the time being.
I have a Mac Pro late 2012, i was wondering is there any way i can put both drives into two different slots and transfer the files any way?
Or does anybody else know how i can do it, maybe if i take my Mac to the apple store they have a cable they would let me use whilst im there?
Hope somebody can help
Tom

Buy an external hard drive enclosure. They are inexpensive. Put the new drive in it temporarily, connect it and run Disk Utility to format the new drive.
Then transfer files between the two drives with Super Duper or Carbon Copy Cloner.
Next physically switch the drives.
Your old drive can now serve as your Time Machine back up.
Example of a hard drive enclosure: http://www.newegg.ca/Product/Product.aspx?Item=N82E16817392032

How do I configure my new SSD to work with my iMac?

I just installed a new 4TB Seagate SSD in my 24" iMac (early 2009). When I turn on my computer, it starts up with an image of a folder and a question mark in the middle of the folder. How do I configure my new SSD without my original utility disks (they're currently in another state . . . in the middle of moving)? I have a drive adapter and have connected my old hard drive which allows me to run the computer, but I was unable to transfer everything from old to new using Disk Utility. Thank you so much for any help you can offer.

OK, it's not an SSD, it's an SSHD (love a set of initials) specifically it is a standard 4TB rotating drive with 8GB of SSD memory attached. Treat it just like any other drive because that is how it appears.
"After doing some reading on the internet last night, it seemed like most people said what you're saying that the disks was the preferred method. My concern is that I won't have my disks for another few weeks. Do most people prefer not to clone in order to shed some of the unwanted programs and "stuff"?"
If you want an entirely fresh installation then cloning is not the way to go, otherwise it's the best choice. If you don't have the disks it is the only way to go (with Snow Leopard anyway)
You could boot from the old drive and use it to install Mavericks on the new one if you wish.

Clean Install Yosemite onto new SSD (Also, what is TRIM?)

Hi,
I've been researching how to replace the Hard Drive on my Late 2011 13inch Macbook Pro (MacBookPro8,1 / 2.4 GHz / Intel Core i5 / SATA III) with a new SSD (maybe a Samsung 840 EVO) and clean install Yosemite onto it. I've found a few ways to do this on the support forums and the macrumors forum, but I want to confirm if I can do it this way:
1. Plug new SSD into the Macbook via a USB cable
2. Download Yosemite onto current Macbook Hard Drive. When I'm prompted to install, chose the new SSD from the list. Complete Installation.
3. Remove old Hard Drive from Macbook and plug new SSD in it's place (and not in the optical bay).
Would this work? I have another external hard drive with all of my documents, pictures and music on which I'm just going to manually remove over, and have no problem doing. I can also download the iLife programs directly from the App Store so I wouldn't be missing out on those either (I do have the iLife '09 discs too). I've also read about creating a bootable USB using DiskMaker X, but I feel the route I outlined would be easier.
Am I missing anything? I do have the EFI Firmware v2.7, so the problems the 2011 MacBooks were having with SATA shouldn't be an issue during this. Also, during my research, I found a references to something called TRIM. Can someone explain TRIM to me?
Thanks,
Steve

Thanks for the response and confirming I can clean install Yosemite onto a new SSD using the process I listed in my initial post.
I have a 13'' MacBook Pro with Yosemite already installed onto it so my graphics card should be set. After almost a month of using it, I haven't noticed any issues on that end.
I guess this TRIM thing is a totally separate subject from this thread. I read Apple is no longer supporting third-party SSD for TRIM support. If you turn it on, but keep a security feature on, you risk your computer not booting correctly. It looks like the only way to have TRIM enabled on a SSD using Yosemite is to have an Apple supplied SSD, or an SSD that can trick Yosemite into thinking it's Apple supplied (like the Angelbird Wrk for Mac SSD).
I've also done a good amount of research that TRIM is only necessary if you're saving a lot of items to the hard drive in one sitting (like photoshop). I primarily use my Mac for Pages (which saves my documents into the cloud now), iTunes and Safari. I guess this would fit me into the "casual user' criteria? I've also read that if you don't use TRIM, your SSD uses "Garbage Collection" (which actually sounds terrible) to keep the SSD informed on what data can be overwritten since it's been deleted by the user. I read that most modern SSD hard drives have a pretty decent Garbage Collection function, so if you leave your computer idle, keep "Put the hard disk(s) to sleep when possible" unchecked, the SSD will run Garbage Collection on it's own and that should be sufficient enough to keep the SSD in good working order.

How to install windows on the SSD (Y580)

I have bought an Y580 recently wIth a 64GB SSD and 1TB HDD. I asked the salesperson upfront if the OS would be on the SSD. He said yes. Turns out that it is not. When i returned to them they told me it's a hybrid drive solution. And they have no idea how to install Windows on the SSD.
I did some research and found out that Lenovo uses *Rapiddrive* to speed up programs. Hence why i can't see the SSD in WIndows as it is merged with the 1TB HDD. In Disk management 2 disks show , 0 and 1 , but Windows asks to give disk 1 a MBR or GPT (this is apparantly due to the rapiddrive methode).
My questions:
* Is it possible to install Windows on the SSD and if so how can that be done without loosing the backup on the hidden partition of the 1TB disk? (so that OKR still works)
* What are the benefits of Rapiddrive over using the SSD as bootdisk?

Since it is a hybrid drive, it works a little bit differently; Lenovo's "Rapiddrive" is also different from other hybrids, and in the sake of making it "user friendly" and seen as a single disc they have probably nerfed some configurability for the intermediate/advanced users. However, Windows should already be installed on the SSD portion of the drive, this should be done automatically according to this press release:
http://shop.lenovo.com/us/sitelets/ee/consumer-news
"In the factory we will preload not just Windows 7 on the SSD, but also our Lenovo applications like OneKey™ Theater or OneKey™ Rescue System. The applications, operating system, drivers and other files are all fully-optimized for Enhanced Experience to make them load much faster. This, combined with their installation on the SSD will make the boot time to Windows desktop even faster. Some portion of the SSD will also be reserved as the Windows Paging File — this is used by Windows as 'virtual memory' additional to the normal RAM installed inside the computer. With the SSD acting as the Paging File, general Windows 7 performance will also benefit, especially when multitasking several applications.
The remaining space, which will typically be around 15GB on a 32GB SSD, will be empty, ready for the user to install their favorite applications and files."
I have some of the fastest SSD's around installed on my desktops (SATA III), and while they are blazing fast, keep in mind the whole boot sequence still isn't going to be instantaneous even with an SSD (the biggest differennce you will notice is by the time Windows is loaded, it's fully loaded to the RAM, whereas a normal HDD you may see the desktop but your PC will still be cranking away with startup processes). If your startup is taking 30 seconds or less, maybe even a little longer, it's probably accessing the SSD just fine; if it's taking closer to 60 seconds, then yeah it may need to be reinstalled/reconfigured.
As for reinstalling, sorry I won't really be able to help, hopefully someone else can come along; I personally have never used OKR anyways, and aside from doing a ghost backup I wouldn't say for sure that OKR would be salvageable with a fresh install. And because the Rapiddrive is its own technology, half SATA half PCI-E, I also couldn't tell you if it's even possible to fully seperate the two and keep them as distinct drives.

How many listen we have for creative suits Web-design? because i don't know how to install on my new pc! thank you for the answer!

How many listen we have for creative suits Web-design? because i don't know how to install on my new pc! thank you for the answer!

This is not a photography question. It is an application specific question, Please post in the Photoshop forum.
Photoshop General Discussion
Remember, you are not addressing Adobe here in the user forums. You are requesting help from volunteers users just like you who give their time free of charge. No one has any obligation to answer your questions.

HELP how to install OSX on power book ge prismo running OS 9.2

HELP how to install OSX on powerbook G3 prismo running OS 9.2 help.

First you need to install firmware update 4.1.8. Download at http://support.apple.com/kb/ht1395
I used to have a 400MHz G3 Pismo model running Tiger 10.4.11. It ran quite well, however videos will be very slow.
On your Pismo, what is the processor speed, how much RAM and what size hard drive? I maxed out the RAM on mine & installed a 40GB hard drive.
Tiger install DVDs are in short supply. Tiger is no longer available at the Apple Store but may be available for $129 by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753). For other sources, do a Google search for MA453Z/A (10.4.6), MA190Z/A (10.4.3) and M9639Z/A (10.4) . Also look on eBay. Be sure & buy a retail version (black with silver X) and not a model specific version (gray) See http://discussions.apple.com/thread.jspa?threadID=1976068 Can I use another Mac's system restore disc on my Mac?
Also check these web stores: http://www.lacomputercompany.com/cgi-bin/rpcart/index.cgi?command=dispitem&type= sku&sku=19521 http://www.allmac.com/shop/index.php?cPath=5_10003
After you install the base 10.4.x, update to the final Tiger version 10.4.11. Here's the link for the 10.4.11 combo update http://support.apple.com/kb/TA24901?viewlocale=en_US
Look at this link Mac OS X v10.4 Tiger Installing Software Support Page
http://www.apple.com/support/tiger/install/
You can also download the Tiger Installation and Setup Guide
http://manuals.info.apple.com/en/Tiger_Install_Setup_Guide.pdf
When you upgrade the OS, do it via Archive & Install. See About the Archive and Install feature http://support.apple.com/kb/HT1710 Be sure to select Preserve Users & Settings. Also, repair permissions before and after the install.
 Cheers, Tom

How to install Lion OSX on new SSD without install disc

TL;DR
I need a way to install Lion on a new SSD without an install disc, and how to format it without a Mac.
Hello, just yesterday I opened up my MBP 13" Mid-2010 running 10.7.(4/5) (Not sure which it is, but I think it is 10.7.5) and the first thing I saw was Skype tring to sign in. It looked fine, untill I took a second look and I heard a strange clicking noise coming from my computer. The Sykpe signin page said "Disc I/O error" or something like that. I instantly knew there was something wrong with my hard drive. Tried rebooting, grey screen, strange clicking noise like most people with hard drive failure. I was devistated. It has worked minutes ago, then my brother gets off, I open it up,and the hard drive has failed. After I got over the initial shock, I googled "hard drive replacement" after searching for a while, I noticed most sites just showed how to UPGRADE your hard drive, cloning it and all. Well, heres my main problem. I had no time to clone. Luckily, I had started backup up a month ago, and all my data is safe on my external hard drive, but this is only a time machine backup. No OS. Now, most people can just put in their install disk and voila! But, I, sadly, do not have my install disk. No idea where it went, I just don't have it. So, I was wondering if there was any possible way to make a bootable USB or disk without having acsess to a Mac, or having to buy a disc. I bought Lion, and I'm hoping that there is a way to download this and put it on a USB, then boot my computer from it. Now, my second problem is formatting. I have no idea how to format my SSD, let alone without a Mac. If there is some way to format an SSD so that it will work with a MacBook Pro, that would be great.on a PC
IMPORTANT: No, I don't have ANY install discs, the only one I had, for Snow Leopard, is gone. And no, I don't have access to ANY Macs to format the SSD. Finally, I would really love to be able to do this all cost-free, as I have already purchased the Lion, and dont feel like buying a disc for it again.

Yes. See below:
Drive Erase for Lion/Mountain Lion
1. Wait until the Main Menu appears. This could take quite some time because you are doing all of this over an Internet connection. You should use Ethernet if possible. It's much faster than wireless. Select Disk Utility from the Main Menu and click on the Continue button.
2. After DU loads select the SSD main entry (mfgr.'s ID and size.) Click on the Partition tab in DU's main window. Select One partition from the dropdown menu under Partition Scheme.
3. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
After the above has completed quit DU and return to the Main Menu. Click on the Install/Reinstall OS X option then click on the Continue button.
You should be all set if there are no glitches.

Upgraded hardware, and went from XP to Win7 - how do I transfer/install CS5 onto new SSD hard drive?

I recently upgraded all my computer internals; new mobo, Samsung SSD (solid state drive), CPU and ram. Also went from XP Pro to Win 7 Pro, with Win 7 Pro now residing on the new solid state drive. I still have the old 1TB Serial ATA hard drive connected as a storage device, and this is where CS5 resides. But of course, my CS5 applications are now unusable.
Can someone please give me some guidance as to how to transfer the CS5 installation from the old HD (XP Pro) to the new SSD (Win 7 Pro)? I started doing some research, and read about first "deactivating" CS5, but I cannot open any of my CS5 applications to "deactivate". So I am stumped. I am reticent to attempt a new install from my CS5 disks until I learn the proper process..........
Any advice would be greatly appreciated.
Dave F. in Rhode Island

don't transfer, reinstall.
if you need to reset your activation count, contact adobe support - http://helpx.adobe.com/x-productkb/global/service1.html
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.5 (win), 5.5 (mac) | 5.4 (win), 5.4 (mac) | 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

How to install OSX 10.7 on a reformatted HD Macbook Pro 13?

Is there any way of installing OSX 10.7 or 10.8 on a reformatted hard drive of a macbook pro 13 inch late 2009 that originally came with Leopard (OSX 10.5). I have just bought a macbook pro i5 and once all the data was transferred to the newer macbook I reformatted the hard drive of the old MBP in the xpectation that I could simply reinstall Lion. The recovery disc starts up ok, but curiously the installer points to mountain lion only and I keep getting a dialogue box informing me that my apple Id has not previously bought Lion (not Mountainlion, Lion). For starters that is untrue, I bought Lion on the app store to upgrade from Snowleopard to Lion on the original macbook and that shows up in the previous purchases screen in the App store application. Annoyingly this whole process does not allow me to re-purchase Lion on the old macbook pro and I am also now unable to restore the system from Timemachine as this now appears to be associated with the newer machine. And yes, you guessed it, I no longer have the original installation CDs, not realizing that I would still need these after upgrading the operating system (twice).
Attempts to start up from the only disc that I do have (snowleopard) results in hopeful crunching of the optical drive followed by a grey screen descending across the monitor followed by the message that I must restart the computer and then this process starts again, so getting nowhere and frustration mounting.
I am now left with a machine that is clinically dead with otherwise perfectly functioning hardware
I would be most grateful for any advice.
Thanks
Jan
(based in UK)

Purchase the white Snow Leopard 10.6.3 disks Apple sells on their online store.
Follow these directions, you need to zero erase the ENTIRE drive of the older Mac. (important!)
How to erase and install Snow Leopard 10.6
If you don't, the 10.8 RecoveryHD partition will remain and the 10.6 install disk can't repair the 10.8 drive later if there is a issue. There likely also will be a problem installing Lion, as the Recovery HD will be 10.8.
If you install Lion, it will create it's own Recovery HD for it.
Once your up, Software Update until 10.6.8, then you can log into AppStore and install Lion if you have already purchased it, or call Apple and special order it, because AppStore goes to 10.8 from 10.6.8 supposedly now.
You then can reinstall iLife from the 10.5 disks by running the installer or using Paficist from Charlessoft.
Just to let you know, you cannot sell the machine with 10.7 or 10.8 on it because the next owner needs your AppleID to reinstall or update the OS. 10.7 or 10.8.
So if your selling it, just install 10.6.3 and press the power button down, it will reboot to the Welcome Video for the next owner.

How to install OSX 10.6 client in Mac Mini Server 10.7 Lion Server

I am ordering a Mac Mini Server with Lion Server 10.7, with 256GB SSD and 750GB HD. I want to use Snow Leopard (client/workstation) instead. Previously I have already purchased retailed version of 10.5 clients and 10.6 client upgrade. Please advise the best approach from the followings (or more suggestions from you guys...).
(A) The boot disk (likely to be the SSD) will be re-formatted and re-installed by "clean" installation of 10.6 client. But I am not sure whether all hardware drivers for the new Mac Mini (2011) are available in the 10.6 client disk. Also, it seems to me that installation disk of 10.7 server will not be provided. So I shall not be able to re-install server version again if I want to change this Mac to a server sometimes afterwards. Of course I would like to keep this server software for investment protection, no matter I use it or not. If 10.6 client can be installed, I shall use bootcamp to install Windows 7 also. So there will be 2 partitions to be usable aparently.
(B) The factory-installed OSX 10.7 server is kept, and one more partition is created (with Disk Utilties). Snow Leopard workstation 10.6 will be installed at this new partition. If 10.6 client can be installed, I shall use bootcamp to install Windows 7 also. So there will be 4 partitions, including 10.7 server, 10.6 client, 10.7 recovery drive and bootcamp for Windows 7. Since I want to put all OS software at the SSD (faster boot-up and better performance), the drawback is that each partition is with less space.
Do you guys have other ideas or suggestions?
[Background]
In fact I want to make use of its strongest computing power (amongst available Mac Mini computers in store), quad-core CPU & dual disks, to run music applications (DAWs). Operating systems are put at SSD, and data is put at traditional harddisk. As some music applications (e.g. Calkwalk Dimension) only support 10.6 currently, I need to down-grade from Lion server to Snow Leopard workstation. Also I think applications can run faster in a hardware with workstation OS (rather than server version). Please correct me if this belief is wrong.
Thanks / Howard.

If you completely wipe the original Mac mini boot drive you will wipe the Server.app software an dlose it. You should make a backup first, perhaps by saving the entire boot drive as a Disk Image file on to another drive.
In terms of install 10.6, the 10.6 DVD will not boot on the new Mac mini even if you connect a DVD drive. You need to put the Mac mini in to FireWire Target Disk Mode and connect it to an older Mac that will allow booting from that DVD, then install on to the Mac mini (over FireWire), you then need to upgrade it using the 10.6.8 Combo Updater this will add the drivers needed for the new Mac mini.

OK HERE IS WHERE I AM AT HARD DRIVE WENT DOWN UPGRADED TO A 250 GIG AND NOW NEED TO KNOW HOW TO INSTALL OSX ON THE POWERBOOK G4 17

I have a powerbook g4 17 and it recently went down the hard drive sounded like it was eating itself so i replaced the hard drive with a 250 gig and now i need help on how to get osx onto the powerbook it will not boot from disk i will start all the back at 0s9 if need be can anyone please help me i miss my g4

Do you have any OSX disks?
It won't boot from the new hard drive yet because there is no OS installed.
You need to use an OSX disk, put in your mac, then when turn on, hold down the C key (to boot from the CD).
Hold it down for a long time until you hear it noisily reading from the CD drive. Once OSX starts up (from CD) you should go to Disk utility and you will need to format your new hard drive.
Once formatted, you can then install OSX.
Everything is done from the OSX install disk.
If you don't have one, you can buy a retail copy from Apple (not Snow Leopard), or from Ebay. Make sure it is a retail copy, not disks that came with a Mac as they only work with the exact model of Mac it came with.

How to install OSX on 2nd HD and get rid of 1st HD?

(thanks to this forum) I managed to install a second HD on my MacPro (I have to specify that I'm degree below z-e-r-o in hardware...).
now, my second HD appears on the desktop (it's set for 1 partition in D.U.)
AND THE BIG QUESTION IS:
HOW CAN I INSTALL OSX ON THIS NEW DISK AND GET RID (once it's done) OF THE OLD CRAPPY SEAGATE HD?
I know that it can be 'cloned' (I've read about for that here on the forum) but, is this the best thing to do? or shall I restart from the original APPLE CD? but how to do that...?
thanks!

Why is your Seagate "crappy?" Is it not behaving well in some manner? Because if you were to clone, the exact software issues that it has would appear on the clone. If you simply erase and install on the second empty hard drive, none of the other hard drive's software issues would be present. However, I would make sure your data is backed up before installing anything, and attempt to isolate whatever issues you are having first. If there is nothing on the second hard drive, you can go ahead and install and find out if you have the same issues on that drive. Erase and install is one of the installation options from the installation disks included with your Mac Pro. Be careful not to erase and install your original hard drive unless you are totally backed up as my FAQ explains:
http://www.macmaps.com/backup.html
P.S. in case you didn't realize it, on the internet using ALL UPPERCASE means you are attempting to shout and be rude. Please avoid it so people don't misunderstand you.

Problems installing OSX Lion - new Mac Mini 2011

Hi!
I'm having major problem with my brand new Mac Mini.
I wanted to upgrade it right away after reading so many succeful upgrading reports on various forums so I bought a 120GB Intel 320 SSD disk and 2x4 GB of Kingston 1333mhz ram. I swapped the drives right away and idiotically used to original drive in a case to create an external installation USB-drive (my 4GB USB drives didn't work).
I then created a bootable USB-disk with the external original drive and tried to install but only get the circle with slash after selecting the drive in the "options" menu. If I remove the USB-drive I get a flashing folder icon. If start holding down Command + S I get a message saying that the "version of OSX is not supported on this platform".
I also tried using the Recovery Assistant HD to create a bootable recovery tool but that gives the same results.
In short:
I can't install OSX Lion on a brand new Mac Mini with upgraded HD and Ram. I don't have the original installation anymore.
Am I out of luck?

Internet Recovery solved this problem. Option+Command+R.

Installing ML on new ssd

Hi,
I just got a new Mac Pro and an SSD drive. I would like to install ML on the Ssd and use it as a startup disk. I have not fired up the Mac Pro yet. I have a bootable ML USB drive. My question is about the order of how to do things. Is there a way to start up with the USB and format and install ML on the ssd without ever booting with the HDD?
Thank you!

Install the SSD. Boot the computer from the USB drive:
Boot Using OPTION key:
1. Restart the computer.
2. Immediately after the chime press and hold down the
"OPTION" key.
3. Release the key when the boot manager appears.
4. Select the USB drive.
5. Click on the arrow button below the icon.
Partition and Format the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select SSD (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button. Be sure to select the SSD.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

How to install OSX on new SSD?

Similar Messages

Maybe you are looking for