How to Install Patch 3944888: EBS-OFO integration patch for PLM Family

Dear Oracle,
I just Download Patch 3944888: EBS-OFO integration patch for PLM Family Pack 11.5.10 E. Unfortunately after unzip the file and read the readme file, i can't found the installation guide or instruction to install the patch. Does anybody know how to install this patch on EBS?
Best Regards
Gumas

Gumas wrote:
Dear Oracle,
I just Download Patch 3944888: EBS-OFO integration patch for PLM Family Pack 11.5.10 E. Unfortunately after unzip the file and read the readme file, i can't found the installation guide or instruction to install the patch. Does anybody know how to install this patch on EBS?
Best Regards
GumasYou need to apply the patch driver u3944888.drv using adpatch like any other patch.
Just make sure you apply all the patches under "Prerequisite Updates" before applying the patch.
You may also refer to these docs which are related to the patch you are applying.
Integrating Oracle E-Business Suite (11i, R12, and R12.1) with Content Management Repositories [ID 1061947.1]
Internal Controls Manager Patchset history [ID 400191.1]
Update Process, Risk Or Control Results In JBO-25002 ApplicationModule Not Found [ID 553539.1]
Cannot Add Or Display 10G Repository Attachments [ID 367965.1]
Thanks,
Hussein

Similar Messages

  • I just purchased Wittenberger Fraktur how do install this font into my photoshop cs6 for mac ?

    I just purchased Wittenberger Fraktur how do install this font into my photoshop cs6 for mac ?

    You just install it in the OS.
    Photoshop gets the fonts from the OS.

  • How to install old ios? v.3.0 for ex.

    how to install old ios? v.3.0 for ex. for iphone 3g?

    There is no legit way to downgrade at all.

  • How to access the pre-delivered XI Integration Content for APO ,SCM or CRM

    Guys,
    Do anyone know how to access the pre-delivered XI Integration Content for APO ,SCM or CRM and load onto the XI server.
    Any inputs in this direction is appreciated.
    Thanks, -Vara.

    Hi VaraPrasad,
    you can try:
    1. https://websmp204.sap-ag.de/swdc
    2. Search for all Categories
    3. type: XI content
    then unpack and the easiest way is to import with the file system:
    http://help.sap.com/saphelp_nw04/helpdata/en/a8/5e56006c17e748a68bb3843ed5aab8/content.htm
    and you have the content on your XI
    Regards,
    michal

  • HT4436 how do i setup a new email address/account for another family member in icloud

    how do i setup a new email address/account for another family member in icloud?

    They will need to get their own Apple ID - go to http://appleid.apple.com to set up a new one. You will need a different non-Apple email address from any already in use.
    Then they will need a separate user account on the Mac, or their own computer. You can then set up the account and add an @icloud.com email address in System Preferences>iCloud.
    Although you could set up an alias address on your own account, I should advise against this - once created you cannot detach an alias from the account so they wouldn't be able to move it to their own account at a later date and their email would be inextricably linked with yours.

  • How to install APAC, LATAM and EMEA localization patches

    Hi,
    I was told to install APAC, LATAM and EMEA localization patches on our instance.
    Please help me how to proceed with this patching, below are the details about our instance.
    eBS version: R12.1.3
    OS Version: REL 5.8
    DB version: 11.2.0.1
    DB Characterset: US7ASCII.
    Does this patching depends on the existing database character set ?
    I referred few threads in Oracle forums and metalink notes, but I did not get clear idea where to start and how to start....your help is highly appreciated.
    Regards,
    Siva.

    Hi Srini/Hussein,
    I am referring the navigation (License Manger --> Country-specific Functionalities ) as per the note id: 351900.1, but JA, JE, JG and JL not listed in it, below are the values for reference.
    I was told that the country codes are JA, JE, JG and JL, do I need to perform any action plan to get JA, JE, JG and JL in the below list...i think from the list we can select the respective country name and enable the functionality.
    I am a DBA, doing this activity first time; please let me know what details I should get from the our application team to proceed with this activity.
    Srini: Please provide the url for referring MOS Doc.
    Select           Country Name                Country Short Name
    1           Argentina                AR
    2           Australia                     AU
    3           Austria                     AT
    4           Belgium                     BE
    5           Bolivia, Plurinational State of      BO
    6           Brazil                     BR
    7           Canada                     CA
    8           Chile                     CL
    9           China                     CN
    10           Colombia                     CO
    11           Costa Rica                CR
    12           Czech Republic                CZ
    13           Denmark                     DK
    14           Dominican Republic           DO
    15           Ecuador                     EC
    16           El Salvador                SV
    17           Finland                     FI
    18           France                     FR
    19           Germany                     DE
    20           Greece                     GR
    21           Guatemala                GT
    22           Honduras                HN
    23           Hungary                     HU
    24           Iceland                     IS
    25           Israel                     IL
    26           Italy                     IT
    27           Jamaica                     JM
    28           Japan                     JP
    29           Korea, Republic of                KR
    30           Mexico                     MX
    31           Netherlands                NL
    32           Nicaragua                NI
    33           Norway                     NO
    34           Panama                     PA
    35           Paraguay                PY
    36           Peru                     PE
    37           Poland                     PL
    38           Portugal                     PT
    39           Puerto Rico                PR
    40           Singapore                SG
    41           Spain                     ES
    42           Sweden                     SE
    43           Switzerland                CH
    44           Taiwan                     TW
    45           Thailand                     TH
    46           Trinidad and Tobago           TT
    47           Turkey                     TR
    48           United Kingdom                GB
    49           Uruguay                     UY
    50           Venezuela, Bolivarian Republic of      VE
    Regards,
    Siva.

  • How to install java stack ,only  abap ,basis patch level 9 installed

    how to install java stack ,already installed abap ,basis patch level 9,please any one guide me and please give me installation steps for java stack.

    Hi,
    From sapinst, install Java Add-on.
    check installation guide.
    Thanks
    Sunny

  • How to install Enterprise Manager to JDeveloper integrated Weblogic domain

    I have installed JDeveloper 11g and as you know it also installs an embedded Weblogic and creates a Weblogic domain. This domain by default has the console application but does not have the em application. How can I add em to my integrated Weblogic?

    Sturla,
    I can give you the quick steps for installing EM into the WLS container integrated with JDev:
    1). Download from OTN two pieces of software from the Fusion Middleware 11g (use the "For Deployment" software, click "See All"): the Application Development Runtime, and (under Additional Required Software) the Repository Creation Utility (RCU).
    2). Unzip the RCU and run bin/rcu.bat or bin/rcu (windows/*nix). Create the MDS repository in an Oracle DB using this utility.
    3). Install the application development runtime into the same home you installed JDeveloper.
    4). Run the configuration wizard - on Windows its in the start menu / Oracle Fusion Middleware 11.1.1.1.0 / Weblogic Server 11gR1 / Tools. Find it yourself on *nix ;)
    5). Choose to extend a domain
    6). Pick your DefaultDomain directory for the integrated WLS
    7). Tick the checkbox to add enterprise manager
    8). Supply the database connection information for the DB in which you created the repository in step 2.
    Ta-da!
    The EM will be accessible via http://hostname:7001/em, username/password=weblogic/weblogic1. I will caution you about generically installing into the integrated domain - it makes your WLS take noticeably longer to start up...
    Best,
    John

  • How to install the add-on Photo Upload Dropbox for CC products, like Lightroom?

    I have bought the add-on from Adobe to use it in Lightroom. My CC app says it is installed, but I can't find it in any of my CC apps (Lightroom, PhotoShop etc).

    When you purchase an Add-on, the web page for the add-on has a tab that tells you where to find it and how to install it.
    Go back to the page where you ordered it and look for the Where to Find It tab, shown below:
    For further questions, it would be best to ask in the Lightroom forum.

  • How to install itunes and docusign in ios simulator for monodevelop

    Hi All,
    Can anyone tell me on how to install iTunes and other applications like Docusign in ios simulator that is run on Mac(monodevelop).
    Thanks

    Hi there rj 138,
    You may find the troubleshooting steps in the article below helpful.
    iTunes for Windows: "Registry settings" warning when opening iTunes
    http://support.apple.com/kb/ts3299
    -Griff W. 

  • How to install "Oracle Universal Content Management 10g Patch Update Bundle

    I have downloaded and installed Oracle Content Server 10g r3 , and i did a simple cycle for a work-flow , and after that i downloaded "Oracle Universal Content Management 10g Patch Update Bundle", but when i opened the file i found that it contains many folder and some without a setup files , so how can i install the patch update bundle file ?
    Thanks

    Although what Srinath is true and correct, it is advised that you always install all the enabled components. The only situations where this is not the case is where:
    1. You have a newer component than is in the bundle (i.e. you recently had a patch for that component which is newer than the bundle).
    2. You have customised the component in question for your own use - in which case a newer version would overwrite your customisations.
    Otherwise, you should install all the enabled components if possible.
    Edited by: Frank Abela on Jun 22, 2010 4:26 PM

  • How to install eclipse and MyEclipse and use it for jsp-servlet-web service

    hi ,
    please help me to install eclipse 3.1 and How to integrate MyEclipse to do jsp-servlet programming and web services.
    please also help me to include application server like tomcat and axis and use that environment in MyEclipse ide.
    please help me.....

    At the time of installation , you can't change SID XE.
    After installation, you can add another service name
    Check following thread for more details
    Re: How to create service on Oracle 10g XE
    - Virag Sharma
    http://virag.sharma.googlepages.com
    http://viragsharma.blogspot.com

  • How to install and where to get kernal source for Oracle VM Server

    Hi guys
    Can someone point me in the right direction for oracle VM Server kernal source, as the server I am using won't ping, and found its cause it doesnt recognise the network adapter, says there is no drivers.
    But the HP website states I have to have the kernal source install so that I can build the driver.
    Any suggestions or help on the matter?
    Thanks

    Thanks
    I got my server to ping.
    Now I have ran into more trouble.
    I have been following ORacles installation guide for installing a Virtual Machine, but am struggling to install it, as their instructions don't match whats on the screen.
    They tell you to copy each CD into a directory.....
    and then mount that directory as an NFS mount.
    I done all that
    and then it tells u to do virt-install
    So I do that, and it all works great, until the end part, its mean to ask you what is your installation souce directory , and your supposed to put nfs:selfhostname_ip_address:/path/to/files
    and away you go.
    However my server says " what would you like to use as your virtual CD image"
    and so I type nfs:server_ip_address:/path/to/files etc, and I get the error CD MUST EXIST
    so to get around this, I just typed /OVS/iso_pool/Disc1.img
    and away we go, instlalation starts....
    However THe instlalation then asks for disc 2, and then I get stuck, how do I tell it, that I changed the disc, and its ready?
    I tried an installation of mounting the disc1 iso from a cd to /mnt
    and then wen it wanted disc 2 I dont umount -l /mnt ...it said inodes busy, so I just forced the eject CD physically ont he drive
    and then mount /dev/cdrom /mnt , for disc3
    but it didn't detect I changed a cd.
    Can anyone help me, its really urgent have to get this server up and running by today if possible.

  • How to install directory server/client on Solaris 9 for dummys

    Hi,
    after reading hunderts of pages, after asking questions in forums without getting the right answers, i was able to install the directory server in our company.
    Here is the summary i made for myself. Perhaps it helps others to avoid the same problems.
    Set up a Directory Server (sun one ds 5.1)
    Present situation:
    -Nisplus is installed
    -Solaris OS 9 sparc 64bit is installed
    -DS5 Software is normally already installed in Solaris 9. Check off with 'pkginfo | grep IPLT*'
    -Otherwise install from Solaris OS 9 Disc1 with 'pkgadd -d IPLTxxxx .'
    -Software setup with '/usr/sbin/directoryserver setup'
         Install admin- and directory server.
         For Directory Server use port 389 (necessary for later use of SSL)
         For Admin Server use any empty port > 1024
         Run directoryserver as root (necessary for using port 389 and for -starting servers from console)
         Use default Directory Manager DN cn=Directory manager
         Use your domain as DIT (default information tree) example: dc=example, dc=com
         As second DIT, setup installs o=NetscapeRoot. Don't change this DIT at all!!!!!
    The server stores all the default schemas there which are absolutely important for the directoy
    server. Don't change anything there !
    -Configure software with 'idsconfig'
         Preferred - and default server xxx.xxx.xxx.xxx (ip_adds of your directory server)
         Use default search scope one
         Use credential's Proxy
         Use authentication Simple (you may change this later if needed)
         All the rest should remain on default settings
         You will be asked for a proxy passwort
    -Start the directoryserver console with '/usr/sbin/directoryserver startconsole'
    -If it's not yet running, start the directory server from console or with command 'directoryserver -s instance_name start'
    -If it's not yet running, start the admin server from console or with command 'directoyserver start-admin'
    -On directoryserver's gui at configuraton/password set password encryption to 'unix crypt algorithm (CRYPT)'
    Import Data
    -Get Data from Nisplus with
         'niscat passwd.org_dir passwd.ldap'
         'niscat hosts.org_dir hosts.ldap'
         'niscat groups.org_dir groups.ldap'
         etc
    -adjust the files. (try it out with one entry of a file only. You may delete this entry with the gui very easy if it's not successfull.
    -hosts.ldap must look like
    xxx.xxx.xxx.xxx machine1
    xxx.xxx.xxx.xxx machine2
    xxx.xxx.xxx.xxx machine3
         First value is the ip-address, second one is the hostname.
         If you have more than one hostname per machine, use a second line (don't write 2 names behind the ip-address like you did in nisplus!!!)
    Change content of files into ldif format
    -perl migrate_hosts.pl hosts.ldap hosts.ldif
    -perl migrate passwd.pl passwd.ldap passwd.ldif
    -You may download the above perl-Files from http://www.padl.com
    Change the converted passwd.ldif File as follows:
    -before change:
    dn: uid=mario,ou=People,dc=krinfo,dc=ch
    uid: mario
    cn: mario
    objectClass: account
    objectClass: posixAccount
    objectClass: top
    userPassword: {crypt}6O9m3uK./T/rM
    loginShell: /bin/bash
    uidNumber: 1020
    gidNumber: 14
    homeDirectory: /home/mario
    -after change:
    dn: uid=mario,ou=People,dc=krinfo,dc=ch
    uid: mario
    cn: mario
    objectClass: account
    objectClass: posixAccount
    objectClass: shadowAccount <--- this line must be inserted
    objectClass: top
    userPassword: {crypt}6O9m3uK./T/rM
    loginShell: /bin/bash
    uidNumber: 1020
    gidNumber: 14
    homeDirectory: /home/mario
    Insert the line for every entry in the passwd.ldif file
    You may now import all these xxxx.ldif files into the directory server with
    -ldapadd -h name_of_directoryserver -D "cn=Directory Manager" -w password -f XXXXX.ldif
    You may use this commands later to import further data.
    -Initialise a client
    'ldapclient -a proxyDN=cn=proxyagent,ou=profile,dc=example,dc=com init xxx.xxx.xxx.xxx'
    The xxx.xxx.xxx.xxx at the end is the ip address of the directory server
    -This will make a client with data taken from the default profile from the directory server. This profile has been produced with the earlier command idsconfig and can be changed if needed.
    -The System will ask you for the proxy password (given the first time in idsconfig dialog)
    -You may now look at the produces files
    in '/var/ldap/ldap_client_file' for the client settings
    in '/var/ldap/ldap_client_cred' for the proxy settings
    'ldapclient list' shows the settings of the client
    With 'ldaplist -h' you may see all the existing entries with their objects.
    Activate the client
    -If it's not yet running, start '/usr/lib/ldap/ldap_cachemgr'
    -All nisplus daemons/programs have been stopped by ldapclient command. If not, stop them manually.
    -/etc/nsswitch.conf should have been copied from /etc/nsswitch.ldap from ldapclient too.
    -If not, do it manually.
    example
    passwd: files ldap
    group: files ldap
    hosts ldap dns files
    etc
    I recommend to change the file '/etc/nsswitch.ldap' because the system oftens copies nsswitch.ldap to nsswitch.conf and if nsswitch.ldap is adapted, you must now change it again and again.
    you may now check whether ldap is working fine with the following requests:
    getent passwd username
    getent hosts hostname
    getent groups
    getent network
    These commands should give you the requested answer.
    Be sure to clean:
    /etc/hosts      inside is only your workstation and the directory server
    /etc/passwd     only default and local entries
    /etc/groups only default and local entries
    etc
    try a telnet to your own machine to check, whether password and automount of your home_dirctory works fine.
    I failed here. All was working fine, but the password exchange did not because of credential/authentication problems.
    Best regards and good luck
    Mario

    Directory Server 5.1 does not support Kerberos authentication.
    Beside this there are some extensions in MS kerberos authentication that makes it almost impossible to have a MS client authenticate with something else than AD.
    Regards,
    Ludovic.

  • How to install Oracle 10g Release 2 (10.2) for RHEL 5

    Hello Guys,
    I want to install Oracle® Database 10g Release 2 (10.2) for Linux x86-64 in RHEL 5
    Please experience people guide me ... please don't give me http://download.oracle.com/docs/cd/B19306_01/install.102/b15667/toc.htm (Oracle® Database Installation Guide 10g Release 2 (10.2) for Linux x86-64) link i already gone through but it's to much in depth and not able to understand what is that i can use from this.
    My Machine is having 12GB RAM and it's 64bit machine.
    So please provide me steps that only relate to my oracle installation. I just want to do simple installation without database and my machine not have graphical interface also.
    Send me your generic steps that i can run on my machine. if you want information about my system specification please ask.
    So please people help me out... i am really thankful to you guys .....
    Thanks ,
    ORACLE DBA P

    That also good idea man. thanks for your valuable advice.
    I have confusion here ...
    3. Changes to be made to Kernel parameters
    After installing above mentioned packages, we need to change some Kernel parameters and make them match to Oracle requirements. Parameters which should be changed are shown below
    shmmax     2147483648
    shmmni     4096
    shmall     2097152
    shmmin     1
    semmsl     250
    semmns     32000
    semopm     100
    semmni     128
    file-max     65536
    ip_local_port_range     1024 65000
    rmem_default     1048576
    rmem_max     1048576
    wmem_default     262144
    wmem_max     262144
    We do all these changes in the /etc/sysctl.conf file by adding these lines to that file:
    kernel.shmmax = 2147483648
    kernel.shmall = 2097152
    kernel.shmmni=4096
    kernel.sem=250 32000 100 128
    fs.file-max=65536
    net.ipv4.ip_local_port_range=1024 65000
    net.core.rmem_default=1048576
    net.core.rmem_max=1048576
    net.core.wmem_default=262144
    net.core.wmem_max=262144
    Question: What will be my value for this as my system is 64bit so this all parameter is ok if i put all straight ?
    ----> Setting Shell limits for the Oracle UserTo improve the performance of the software on Linux systems, you must increase the following shell limits for the oracle user:
    1. Add the following lines to /etc/security/limits.conf file
    oracle soft nproc 2047
    oracle hard nproc 16384
    oracle soft nofile 1024
    oracle hard nofile 65536
    2. Add the following lines to /etc/pam.d/login file
    session required /lib/security/pam_limits.so
    session required pam_limits.so
    3. In order to use Oracle Software, we need to make a change in “oracle” user’s buffer size and number of opened file descriptors. In order to do it, we add below lines to /etc/profile file
    if [ $USER = "oracle" ]; then
    if [ $SHELL = "/bin/ksh" ]; then
    ulimit -p 16384
    ulimit -n 65536
    else
    ulimit -u 16384 -n 65536
    fi
    fi
    Question: this things also i need to change ?

Maybe you are looking for