How to install patch GridControl_10.2.0.4_Win32 on oracle 10g r2

Hi
How to install GridControl_10.2.0.4_Win32 on windows 2003 for Oracle 10g r2.
If any one has steps ,please send me.

Hi
You will have to install each components for your grid controller
- Management Server (OMS): Middle tier server that handles communication with the intelligent agents. The OEM Console connects to the management server to monitor and configure the Oracle enterprise.
- Database repository
- Agent repository
- Agents on all the servers
Please dedicated specific homes for each components.
Enterprise Manager is installed on multiple Oracle homes within the Oracle base directory. This means that a typical Enterprise Manager Grid Control installation creates three Oracle homes in different Oracle home directories. For example, oms10g, db10g, and agent10g.
Please read also that : http://download.oracle.com/docs/cd/B19306_01/em.102/b40103/pre-installation_requirements.htm#BABFEAIA
Full Documentation
http://download.oracle.com/docs/cd/B19306_01/em.102/b40103/pre-installation_requirements.htm
Hope this helps.
p.s
DBConsole:
emctl start dbconsole
emctl stop dbconsole
Grid Control:
emctl start oms
emctl stop oms

Similar Messages

How to install NW2004s abap and/or java on Oracle 10g on SLES 10 32 bit?

Does anyone know - How to install NW2004s abap and/or java on Oracle 10g on SLES 10 32 bit?
Does SAP offer the software for trial for this?
Jay

Hi Check the link page you shall get the PDF and then goto Page 50 .you shall find the details.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/3096e412-7308-2b10-4999-e16c64ce5eeb
Thanks
Rishi Abrol

How to install patches in DWM?

I've been trying but I can't figure out how to install patches in DWM. For instance I'm trying to install the Fancybar pathc from the DWM. I tried to do this by going to my dwm directory, run patch -p1 < ~/fancybar-r1496.diff, then rebuild DWM with makepkg -efi --skipinteg and finally restart DWM.. But it doesn't work
What am I doing wrong?

patroclo7 wrote:If you compile dwm, by hand, you obviously need to run plain "make clean install" and not resort to makepkg. If you want to resort to makepkg (which is in this specific case, IMOO, overkill) you can: apply the patch in the PKGBUILD itself; apply the patch by hand in $startdir/src/dwm-<version>, but then you need to use the specific option "-e", so to instruct makepkg to use the existing $startdir/src without untarring again the source tarball.
Well, the reason I'm using PKGBUILD is because that's what the Arch Wiki says. But if make's better then I'll use that instead. How exactly do I do that?

How to Install and Configure Workflow For PO in Oracle Apps Version R12

Hi,
Please do let me know how to install and configure Workflow for Purchasing in Oracle Apps R12 Version.
I want to the standard setup of workflow configuration for the PO.
Thanks and Regards
Srini

Hi Suresh
Only the latest version of WLP which is WLP 10.3.2 has facility to integrate with Oracle UCM with Adapaters. So make sure that you do have this latest version of WLP 10.3.2. Older versions like WLP 10.3 do not have this provision.
Also I guess when you install and configure this Oracle UCM Adapater and choose above WLP Home, I guess these modules may be added in already installed WLP folders. I checked on my side for WLP 10.3.2 and I could NOT find the modules you mentioned. So most probably you may be missing some installation/configuration stuff from UCM side.
Thanks
Ravi Jegga

How to hide the data in particular table in oracle 10g

How to hide the data in particular table in oracle 10g
i want steps

If its on Report u can always hide the column - Keyfigure or Selection - Display - Hide......y do u want to have it on the report if it is to be hided in the first place?

How to install patchs in linux

Hi Friends,
I am new person. How do I install oracle patchs in linux redhat 5.0 system?
Plz show me some steps in detail.
Thanks,
Jim

Hi Jim
Sorry for the late answer.
What patches are we taking about?
Oracle patches? Yes then you have to use
0. First read the installation note given on metalink it gives your a detailled description what shall be done.
In metalink go to Patches & updates
make a simple search on your patch and read the read me file
Please control also that the file downloaded is consitent by controlling the value of the "patch digest"
for example :
File      Digests
p7369190_10203_Linux-x86-64.zip
SHA-1      295AF3B7585BB00093CF7DB25A314E750B3A76AE
MD5      7D1C9C9B36D646E557DE250458067B1B
i.e.
to list all the installed patches :
$ORACLE_HOME/OPatch/opatch lsinventory
unzip p7369190_10203_<platform>.zip
cd 7369190
opatch napply -skip_subset -skip_duplicate
And if the patch is changing something in the datadictionary :
cd $ORACLE_HOME/cpu/CPUOct2008
sqlplus /nolog
SQL> CONNECT / AS SYSDBA
SQL> STARTUP
SQL> @catcpu.sql
SQL> QUIT
cd $ORACLE_HOME/rdbms/admin
sqlplus /nolog
SQL> CONNECT / AS SYSDBA
SQL> @utlrp.sql
You can check for any invalid objects by executing following statement:
SQL> SELECT OBJECT_NAME FROM DBA_OBJECTS WHERE STATUS= 'INVALID';
Voilà !
more question please ask!
Edited by: Hub on Oct 29, 2008 10:33 AM
Edited by: Hub on Oct 29, 2008 10:35 AM

How to Install Patch 3944888: EBS-OFO integration patch for PLM Family

Dear Oracle,
I just Download Patch 3944888: EBS-OFO integration patch for PLM Family Pack 11.5.10 E. Unfortunately after unzip the file and read the readme file, i can't found the installation guide or instruction to install the patch. Does anybody know how to install this patch on EBS?
Best Regards
Gumas

Gumas wrote:
Dear Oracle,
I just Download Patch 3944888: EBS-OFO integration patch for PLM Family Pack 11.5.10 E. Unfortunately after unzip the file and read the readme file, i can't found the installation guide or instruction to install the patch. Does anybody know how to install this patch on EBS?
Best Regards
GumasYou need to apply the patch driver u3944888.drv using adpatch like any other patch.
Just make sure you apply all the patches under "Prerequisite Updates" before applying the patch.
You may also refer to these docs which are related to the patch you are applying.
Integrating Oracle E-Business Suite (11i, R12, and R12.1) with Content Management Repositories [ID 1061947.1]
Internal Controls Manager Patchset history [ID 400191.1]
Update Process, Risk Or Control Results In JBO-25002 ApplicationModule Not Found [ID 553539.1]
Cannot Add Or Display 10G Repository Attachments [ID 367965.1]
Thanks,
Hussein

How to install patch SAS disk FW 124232 on SunFire T2000

Hi,
Need complete instructions how to install the 124232 patch on SunFire T2000.
Any help is much appreciated.
Regards,
E

The instructions in the README included with the patch look pretty complete to me. What are you missing?

How to install Patch 14503114

I am trying to install Oracle patch 14503114 using Windows Server 2008R2. I am running Oracle 11g R2. I tried to go by the readme.txt but its not working. Does anyone know how to install oracle patches using opatch?
Any ideas will be greatly appreciated.

The instructions for that patch are generic, so unfortunately he is looking at the right ones.
The options I can think of are: 1) set the environment variables or 2) add the opatch location to your path variable.
1)
C:\Users\oracle>SET ORACLE_SID=PROD
C:\Users\oracle>set ORACLE_HOME=C:\app\oracle\product\11.2.0\dbhome_1
C:\Users\oracle>%ORACLE_HOME%\OPatch\opatch lsinventory
Oracle Interim Patch Installer version 11.2.0.3.4
Copyright (c) 2012, Oracle Corporation. All rights reserved.
Oracle Home       : C:\app\oracle\product\11.2.0\dbhome_1
Central Inventory : C:\Program Files\Oracle\Inventory
   from           : n/a
OPatch version    : 11.2.0.3.4
OUI version       : 11.2.0.3.0
Log file location : C:\app\oracle\product\11.2.0\dbhome_1\cfgtoollogs\opatch\opa
tch2013-06-27_20-39-23PM_1.log
Lsinventory Output file location : C:\app\oracle\product\11.2.0\dbhome_1\cfgtool
logs\opatch\lsinv\lsinventory2013-06-27_20-39-23PM.txt
Installed Top-level Products (1):
Oracle Database 11g                                                  11.2.0.3.0
There are 1 products installed in this Oracle Home.
<output truncated>
2)
C:\Users\oracle>set PATH=%PATH%;C:\app\oracle\product\11.2.0\dbhome_1\OPatch
C:\Users\oracle>opatch lsinventory
Oracle Interim Patch Installer version 11.2.0.3.4
Copyright (c) 2012, Oracle Corporation. All rights reserved.
Oracle Home       : C:\app\oracle\product\11.2.0\dbhome_1
Central Inventory : C:\Program Files\Oracle\Inventory
   from           : n/a
OPatch version    : 11.2.0.3.4
OUI version       : 11.2.0.3.0
Log file location : C:\app\oracle\product\11.2.0\dbhome_1\cfgtoollogs\opatch\opa
tch2013-06-27_20-46-55PM_1.log
Lsinventory Output file location : C:\app\oracle\product\11.2.0\dbhome_1\cfgtool
logs\opatch\lsinv\lsinventory2013-06-27_20-46-55PM.txt
Installed Top-level Products (1):
Oracle Database 11g                                                  11.2.0.3.0
There are 1 products installed in this Oracle Home.
<output truncated>
HTH
Message was edited by: Justin_Mungal - Ugh... why is the code highlighting axing all of my spaces?

How to install Patch to fix the Bug for generating log in OBIEE11.1.1.3.0

Hi,
I found the "Patch Number is 10125516" to fix the BUG for generating LOG in OBIEE 11.1.1.3.0 But I don't Know how to generate password for "Patch Number is 10125516" and as well as How to install the Patch.
Please Let me know to install this Patch.
I am using OBIEE 11.1.13.0 on Linux(OEL5.4-64bit).
Thanks & Regards,
Pamidi.

I found the "Patch Number is 10125516" to fix the BUG for generating LOG in OBIEE 11.1.1.3.0 But I don't Know how to generate password for "Patch Number is 10125516" and as well as How to install the Patch.Log a SR and ask Oracle support to provide you with the password to download the file.
Please Let me know to install this Patch.
I am using OBIEE 11.1.13.0 on Linux(OEL5.4-64bit).Once you get the password, you can access the README file, so just follow the instructions in that file.
Thanks,
Hussein

How To Install Patch in BI Publisher Server

Hi Experts,
Can any one please guide me how to apply patch in BI Publisher server.
Any reference would be appreciated.
P.S : I have gone through the "read me" file but it is not making much sense to me.
Regards,
Andy

What patch is this ? PSU/CPU or a upgrade ?

How to install Essbase on your laptop from the Oracle Download site

Hello everyone,
I am attempting to install the download version of Essbase on my laptop from the Oracle site. I have downloaded the following Essbase-11113 part 1, Essbase-11113 part 2, and APS-11113 part 3. However I am at a loss as to what to do next. I didn't see any executible files in the downloads all I see are xml documents and .dat files so I am completely lost as to how to install the system and get a working copy of Essbase running. Any assistance will be greatly appreciated.
thanks,
EC

I too have it installed on a VM -- Windows 2003 -- and it's a 32 bit OS. If you do want to move it to your real desktop, you'll need a bunch of directories and environment variables from your successful 32 bit install to make it work, even for the client. I think XP should be okay for just Essbase and maybe EAS. You can always install Excel on the VM as well and just keep it entirely self-contained.
SmartView on 64 bit, if you're using Excel 2007, is a non starter; it does work with Excel 2003 and I think it's slated for a fix in 11.1.2.
If you're as hopeless as I am when it comes to installations, make sure you take plenty of snapshots so you can roll back to the last working instance. I did the whole stack on my VM, so I had lots of things to get wrong.
I think those who know what they're doing when it comes to installs don't see it as a challenge -- I'm a developer, not an installer, so I found it it be be gruesome (the full stack, 64 bit Essbase on the real iron).
Good luck.
Regards,
Cameron Lackpour
P.S. Just to show that when it's all certified, it works, I was able to install AppliedOLAP's client (okay, Tim was watching over my shoulder, but still) on my Vista 64 bit without any trouble whatsoever. It worked like a charm.
Edited by: CL on Mar 5, 2010 11:58 AM

Apply patch 10.1.2.3 on oracle 10g application server 10.1.2.0.2

Dear All,
i have installed oracle 10g application server 10.1.2.0.2 with infrastructure and forms & report.
now i downloaded the patch 10.1.2.3 to apply on it.
I have two homes in my application 10g server (infra and forms&report).
should first i apply apply patch on infrastructure and than on forms & report home.
am i correct.? can you please give me procedure how to apply the patch on 10g application server 10.1.2.0.2.
Thanks & regards,
Sher khan

Hi,
can you please correct me in sequence..
1) install oracle 10g application server including
i) infrastructure
2) install forms and report.
3) apply patch 10.1.2.3 on application server
3.1) apply patch on forms and report
3.2) than apply patch on infrastructure..
is it correct sequence thanks,
Thanks & regards,
Sher khan

How can i create a new database instance in oracle 10g express edition?

hello everybody
i'm a student
i am developing a database application
i'm using oracle 10g express edition
to run my application i need to create another database instance
but i didn't find any option for doing so in that product
if there is pls tell me where it is?
if not pls tell me how to manually create it?
regards,
Chaitanya

Chaitanya Babu M wrote:
yaa i'm sure about that .
i want one more instance of database.Can you perhaps explain why? I have a fair share of production and development servers - and not a single one of them needs to run more than one database instance.
So I'm interested in what requirement you are trying to satisfy by using two database instances on a single platform.
Oh yeah - if you want to create a custom XE instance (different SID, different tablespace sizes, more/less PL/SQL stuff installed, hack standard), make a copy of your XE db creation script (in your XE's +$ORACLE_HOME/bin+ and called createdb.sh ) and modify that for your needs.
PS. even with a different SID, only a single XE instance can be run at a time - you can however have 2 different ones defined and then use one at a time (e.g. testing international settings, init param differences, etc.)

How to Enable Full text search in UCM with Oracle 10g

Hi,
Can you please guide me on how to enable full text search in UCM after I have installed it. My database is Oracle 10g. It would be great if you could guide me through the steps since I am very new to this product.
Regards
Ashish

Hi
Are you sure that your indexer is finishing without any errors? Check activeindex.hda under \search directory to see what is the variable set for activeindex variable? If Oracle Text is the indexer search enabled then the variable activeindex should either OTS1 or OTS2. If anything else then you have indexer problems that is not indexing documents.
Check the CS log file to see if indexer errors are shown there. If yes, then put it over here so that we can analyse it.
Hope it helps
Thanks
Srinath

How to install patch GridControl_10.2.0.4_Win32 on oracle 10g r2

Similar Messages

Maybe you are looking for