How to install printer help

Hi, i've just bought the new Macbook Pro 15", i've never used Mac before, can anyone help me, i'm trying to install my printer Lexmark 2480 series. I thought it would automatically run & install but it didnt. I dont know what to do? Sorry if this is the wrong place to ask this question.
Thanks Mo.

It says on the disc its ok for Mac.
Is the printer compatible with Leopard?
Read your printer user manual. Should be installation instructions for Macs. Or go to Lexmark Technical Support website.
Take advantage of your 90 days of free phone tech support by from Apple if Lexmark tech support is not helpful.
The "new" Macbook Pro forums are HERE. Will request that a Host move your post for you.

Similar Messages

  • How to install printer canon MX 393

    Dear Sir,
    could u help me how to install printer canon MX 393.

    This explains:
    http://support.apple.com/kb/PH14143

  • I did not find facetime in iphone5. How to install please help me to install facetime

    I did not find facetime in iphone5. How to install please help me to install facetime

    What country did you buy the phone in?
    What iOS version does it have?
    As has been said, Facetime is banned in some coutnries and so is not available on iPhones and cannot be insatlled.
    Also, before iOS7, the iPhone had no Facetime icon, it was built into the Contacts App.

  • How to install printer drivers for monarch

    Dear Friends,
    I got requirement where users are going to use new printer for Bar code printing.
    Kindly suggest on how to install printer drivers in SAP.
    regards
    Jiggi

    Hi,
    In tcode SPAD, goto "Utilities --> For device types --> Import".
    There are specific notes regarding specific manufactures, search the SAP portal for notes in application area BC-CCM-PRN-DVM.
    Check SAP Note 8928 for a start.
    Regards,
    Muralidhar

  • How to install printer drivers....

    HI
             Can any body  tell me about how to install printer drivers. In my case standard drivers(sapwin,swin ..etc) are not supporting. printer drivers are available in Manufacturer site . Can any body please suggest how to install the drivers.
    Please give me the steps ,
    Message was edited by:
            venkateshwarlu veeramalla

    You will need to create separate device types for each printer family installed at your installation or if each printer family require either simplex or duplex printing.
    1. Go to ‘Spool Administration screen’ by using transaction code SPAD from the initial screen of SAP.
    2. From the SPAD screen choose menu path Utilities-->for device types --> IMPORT (or you can run RSTXSCRP program from SE38, too).
    3. In the initial screen of “SAPscript Export to Dataset/SAPscript Import from Dataset” enter the following:
    a) Check Radio button for device type.
    b) In the Object Name field enter object name of the device type file (please see the table at the end of this document for object names)
    c) MODE must be IMPORT
    In the Ctrl parameters for file operation
    d) Check radio button for "From/on frontend" ( Generally this would be the default)
    That's it. Don't enter anything else. Execute by clicking execute button or function key F8.
    4. In the “Create Object Directory Entry” window that pops up, enter your development class and press enter
    5. You will get a pop up Window “Import from a Local File”. Browse through the Window to enter the filename in your local directory and click ‘Transfer’ button.

  • My ph's apple4g i update latest virsion 7.0.4 now my ph was very slaw,can i get a 6.0.3 or 7.0.0 and how to install plz help me.........

    my ph's apple4g i update latest virsion 7.0.4 now my ph was very slaw,can i get a 6.0.3 or 7.0.0 and how to install plz help me.........

    3.5.x will be supported until August.
    http://www.mozilla.com/en-US/firefox/all-older.html
    Also see: [[Installing a previous version of Firefox]] and [[Installing Firefox]]
    If you want to troubleshoot your problems with Firefox 3.6.x you can start with [[Firefox hangs]]. Start basic troubleshooting with [[Safe Mode]].

  • How to install Printer driver *

    Hi,
    How to install HP printer driver , so that i can see new device type in SPAD.
    Thanks
    Lisa

    Hi Lisa,
    you need to use the program RSTXSCRP, but take care and check documentation maybe on http://help.sap.com
    Good luck
    Fred

  • How to install printer and modem in solaris

    Please send me detailed installation information about how to install a serial or aparallel printer on solaris 7 and 8 and also how to install the modem on solaris 7 and 8.pls send me some docs,informations etc.

    Solaris 8 includes an "answerbook" CDROM that explains this
    in great detail. Look in the <tt>Solaris 8 System Administrator Collection</tt> �
    <tt>System Administration Guide, Volume 2</tt>.
    You can also read the answerbook documentation online on
    http://docs.sun.com.

  • How I install printer sharp al-2050cs??

    I would like to know how I install a Sharp AL-2050cs printer in my apple computer.

    There is no software to enable this device to work with a Mac.  The printer language is proprietary (SPLC Sharp Printer Language with Comprression) printer language.  I cannot find where Sharp ever supported this printer on a Mac.

  • How to install printer on RG11B ?

    Hello
    I'm having problems installing my Officejet 5110 printer on USB port of my RG11B Wireless gateway with print server.
    I'm running XP Home.
    Printer works fine when I install directly on my laptop (wireless 802.11b). But when i connect my printer to RG11B and add standard TCP/IP Port (192.164.1.254), my laptop does not detect (rocognize) the device.  I have also selected LPR protocol and printer queue name as lpt1 as shown in the status of gateway.
    Remember, router's status does show me that HP Officejet 5100 series printer is attached, Printer port 192.168.1.254 and print server name as lpt1.
    my internet and network works fine through router. Only problem is installing printer on print server.
    Thanks for help
    [email protected]

    Thanks for your reply.
    Yes I think so, but mannual of router has not even indicated about that. It says that IP of print server is 192.168.1.254. It doesn't say that it's IP of the router. Even in router's cutomized settings it refers to it as print server's IP. And it is preassigned.
    thanks again. i hope you'll try to find a solution.
    jurry

  • How do install printer IP1600 using Windows 7?

    Please, could anyone inform how to install a printer IP1600 when using Windows 7?
    Thanks in advance.
    Carlos

    I don't understand what you're asking. iOS 5.1 is the latest version of iOS that exists. If you have iOS 5.1 on your iPhone now and are trying to go back to an earlier version of iOS, that's not supported.
    If that's not what you mean, then you need to explain more clearly what it is you are trying to accomplish.
    Regards.

  • How to install Printer HP LaserJet P2015 in Windows 7!

    Dear all!
    I am luck using windows 7-32bit. I would like to install Printer HP LaserJet P2015 in Windows 7, but I can't install it because when installing, I get it failed. In fact, I can install it in Windows XP without any obstacles, but now I upgrade to Windows 7 32-bit. Would you mind telling me what to do to solve it?
    Thanks a lot and I am looking forward to hearing from all.
    My best regards,
    LUCK
    This question was solved.
    View Solution.

    Hi LUCK,
    The printing functionality for your driver is prodided by the HP Universal Print Driver.
    You may download the driver by clicking the Download button from the link below:
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18...
    If you may find it hard to understand any of the installation steps, you may find the full details below:
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02536202#A6
    Please let me know of any needed clarification.
    Sincerly,
    Shlomi
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02536202#A6
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • How to install printer in windows 7 from print server without downloading the driver access denied

    Hi dears,<o:p></o:p>
    i am trying
    to install printer driver which is installed in win server 2003 into win 7, but
    after connecting it says access denied, looks like the win 7 does not have a
    power user to install the driver.<o:p></o:p>
    now the IT
    in charge do not want to change the GP in the domain (win 2008 R2) and he want
    the printer driver to be installed without the it involvements.<o:p></o:p>
    as i can
    see only thru GP in the DC you can do this, am i correct??<o:p></o:p>

    You are looking for this information
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/dc4fcf93-8268-44f4-822a-d463d9443f6c/windows-7-and-server-2003-printer-server-issues?forum=winserverprint
    Alan Morris Windows Printing Team

  • How to install printer which is not listed in the software list

    I just bought Canon MX372 and I am having a hard time installing it. I have installed the software that came with it and yet I can't add it as printer?
    It is always giving me a msg to update the software and when I accept to update it takes a minute and then says software is not available?!!
    any idea what is going on?

    Okay.
    First, got any third-party login items? If so, disable them (and list here for info).
    Got any other third-party software that might impact printing?
    Then try this:
    Keep the installer or dmg you just downloaded from Apple if you haven't already trashed it.
    If you haven't done so, repair permissions on startup drive and reset PRAM.
    Then go to Print & Scan prefs and delete any printers.
    Then go to Macintosh HD/Library/Printers. (You will have to enter password to authorize this)
    Restart.
    Be sure printer is connected (hard wired, not wireless) and turned on.
    Then reinstall Canon drivers downloaded from Apple, restart, and attempt to install printer.

  • How to install local help files

    I'm trying to install local help files for Papervision API so, when I click on for example a class name, there is a link to the documentation in the dynamic help. Does anybody know?

    Hi,
       When you run for first time, appear a screen in which say:
      Do you want to install this software ?
      Internet Security Warning
      Name: Portal Tools for Real-time Collaboration
      Publisher: SAP AG
      Two buttons:  Install  Don't Install
    This screen appears depending on your browser setting.
    Have you tried in other machine ?
    Have you configured application sharing ServerName in portal ?
    Patricio.

Maybe you are looking for