How to install RAC for a exist single database

Hi Friends,
We will install RAC for exist single Oracle10GR4 in 32 bit window 2003 server
DOes any experts have experience for build a RAC for exist 10GDB?
So we only need to install Oracle Clusterware and does not need to install DB.
Just configured RAC.
Is it true?
Thanks for help
Jim

Hi,
Yes it's true.Go thru the links below:
http://download.oracle.com/docs/cd/B19306_01/server.102/b25159/migrate.htm
http://www.oracle.com/technology/pub/articles/chan_sing2rac_install.html
Also you can use "rconfig" tool given in Oracle 10gR2 specially for this puprose.
Gud Luck!!
Vijay Shanker
Edited by: Vijay Shanker on Feb 19, 2009 12:46 AM
Edited by: Vijay Shanker on Feb 19, 2009 12:59 AM
Edited by: Vijay Shanker on Feb 19, 2009 1:01 AM

Similar Messages

How to install OAM/OAAM against existing populated database

Hi Guys,
We have to install OAM and OAAM against existing populated database. Is it feasible? What all keystores and files we need to copy from one weblogic domain to another?
Thanks

Hi,
The installation has initially been done on standalone weblogic and now we need to convert this installation to weblogic cluster. As OIAM 11gR2 is not supported direct conversion of standalone weblogic to cluster weblogic, we are trying to go through this route. Thanks

How to install Oracle spatial in existing 10g database

Hi all,
I am using Oracle 10g 10.2.0.1.0 on Windows.
How to install Oracle spatial in my database.
I tried to do with DBCA with configure database option but in that Oracle spatial is in disabled state.
Please help I am newby to Oracle spatial
-Thanks & cheers
Antony

Hi Xaheer,
Thank you very much. I run that script, while running the script in some part its showing some errors.
Could you please tell me whether I have to do some task before executing this script.
-Thanks & Cheers
Antony

How to install RAC on windows

Can anyone tell me step by step how to install RAC on windows advanced server. I want to know whether RAC must need Microsoft Clust Service. When I create a cluster with clustersetup.exe, I'm told that it's need oracle partition, but I don't know how to make it.
thanks advance!

Hi, I am Nirmal ([email protected]) Please try this out
Requirements:
H/W: External shared hdd
RAM: 256 MB
OS:win Advance server ,win 2000
PATCH:
The Windows CFS and Clusterware Patch for 9.2.0.6 -- available in Metalink under Patch number 3973928
The 2.2.0.18.0 Oracle Universal Installer -- available in Metalink under Patch number 2878462
The 9.2.0.6 RDBMS patchset -- available in Metalink under Patch number 3948480
1.Install shared disk array.
2.Install cluster interconnect and public Network hardware
a)Create two entries of NIC-Ensure Public IP listed at the top and private IP should be listed below the public IP.
b)Inter connection between two nodes are connected by switch.
3.Ensure the IP/Hostname of all node is entered in hosts file.
4.Ensure the temp /tmp directories are same accross all node.
5.Ensure that all nodes have same local admin name which has full access on the oracle home drive and win home drive.
6.Run the final clustercheck which is available in patch 3973928 which will check the above process if any incorrect it will indicate.(Location is 3973928\Disk1\preinstall_rac\clustercheck subdirectory).
7.Prepare the Logical Drives in Windows dont format or give any drive letter.
8.Install and Configure Cluster software with RAW Datafile.
a)Install oracle home on NTFS partitions and Datafile on Shared Logical Partition.
9.Run Oracle cluster setup wizard.
a)Click clustersetup command line.
b)A welcome page launches click next.
c)Create a cluster. click next.
d)Choose "user private network for interconnect" and click Next.
e)Network config page appears, enter the cluster name. then enter the public hostname for all nodes. Accept the default or change as appropriate for your cluster configuration. click next.
f)Cluster file system option page appears. Choose No Cfs. click next.
g)Disk config page appears. Click "Create Oracle Symbolic links button" label as srvcfg to the partition we have created.
h)Oracle Object link Manage window appears:
     1)From symbolic Link column, select an empty row.
     2)Type in the desired datafile link name and hit enter to save
     3)click apply button to commit.
     4)When the progress bar at the bottom of the screen stops      moving choose close.
i)VIA Detection screen appears. Choose yes or no depending on your config.(VIA-Virtual Interface Architecture).
j)Install location screen appears. its default win_home\system32\osd9i accept .click finish.
k)Cluster setup window appears if no error it will complete and close automatically.
l)Check the serices,
     1.oracleobjectservice
     2.oracleCMService9i
(if any error check the error log)
10.Install the 22018 OUI
a)home oracle_home.
b)Click all nodes and install.
11.If necessary install RDBMS Software into oracle home.
RAC Database using DBCA::
a)Create listeners using Net configuration assistant on each node
b)Run DBCA from command prompt.
c)Welcome page displays with the selection to create a cluster or
single instance database. choose oracle cluster database. next
d)Operation page is displayed. choose create database. Next.
e)Node selection page. Select all nodes. Next.check OracleGSDService
is running on all nodes.
f)Database Templates page is displayed. Choose new database. next.
g)Database Identification page. Enter the Global Database name and
SID (oracle will register SID prefix with a number, this will
become the SID of each node.)
h)Option page for java and inter media database. Choose according to
your need.
i)Connection option select dedicated or shared server .
j)Initialization parameter page. Add required values.
k)Database storage window.(ensure the storage information points to
the symbolic links specified in cluster.)
l)Creation page displayed, click finish.
m)DBCA summary page click create database and ok.
Note:
1)During Java creation it may slow down or hang. Check the CPU
usage and at 95-99% it will slow down please wait check the log.
2)ORA-29807 error may come. Ignore it its a (bug 2925665).
3)alter installation run the script prvtxml.plb, utlrp.sql
4)Any other error please check the alert log.
Message was edited by:
user474717

How to install 2 oracle homes on singl windows host

Hi Experts,
I am planning to install two sap R/3 4.7 ext200 SR1 instances on windows 2003. I already installed DEV instance & planning for QAS.
I am confused about how to install two ORACLE softwares on single windows host.
I search on internet there for windows they are pointing to the registry value
\HKEY_LOCAL_MACHINE
Software\Oracle\inst_loc.
I am not able to understand what I have to do with this ?
Can you please help me to understand & execute this.
Thanks,
Sachin

Sachin,
Go throuth this link to understand more about Oracle Inventory and Oracle Homes software update.
http://cs.ifmo.ru/~ad/Documentation/oracle-10g-lib-doc/em.101/b12140/3_oui_oracle_homes.htm#i1005634
The current entry is picked from the PATH vairable of the system and user that you have logged on. This is because you have already done 1 Oracle Installation on the host.
Keep in mind that you choose the correct oracle home while installing and in future updating Oracle software (patchset, Interim Pactches...)
You can give a seperate path for Oracle Inventory. Just go thru to the existing folder of OraInventory in Program files you will understand it better.
It is used to install and update the Oracle software in the oracle home that you will choose in your next step.
All the Best,
Nilesh

How to install discoverer 10g on existing EBSR12.1.3

Hi ,
iam newbi to discoverer 10g. I have got the application server 10g (10.1.0.2) from the bundle of dvds of EBS R12 SUITE. i need to install dsicoverer 10 g on existing ebs R12.1.3. COuld you please suggest me the steps i need to follow for installation of DISCOVERER 10G.
please specify step by step how to install discoverer 10g on existing EBS 12.1.3.
Please specify what are the software i need to down load and how to install these software in sequential manner.
Please update me as soon as possible. Because i need to complete this installation by AUG1.
Best Regards,
Anil

1. do i need to create another user at the os level. Not necessarily, you can either use applmgr user (the owner of the application tier files) or create a new one.
2. shall i need to install this application server 10g with new user or with root user can i install the software. Please see the installation manual.
In the same link referenced above, click on Documentation tab just next to the Download tab and you find yourself at http://www.oracle.com/technetwork/middleware/ias/documentation/index.html
Select the version and click on View Library then you will find "Oracle Application Server Installation Guides" under the Setting Started tab.
3. After installing this software AS 10.1.0.2. In the document they mentioned that apply the 10.1.3 patch set.( i am not clear about this patch set, is it mandatory to apply this patch set).Yes
Please guide me how to start the installation and how to apply the patch set. Please check the installation manual and the patch README file.
Thanks,
Hussein

How to install rac on the vm ?

how to install rac on the vm ?
Hi everybody,
i want to install to Oracle RAC on the 2 nodes.
i installed oracle enterprise server on the servers.
And i have' t got a another storage, so i shared the disks of the node1 and i mounted the disk on the node2. when i share disk, i used the nfs file system.
This method is a problem for the setup, will you?
DO you explain step by step how to install oracle 11g rac on the vm ?
thanks.

Hi,
DO you explain step by step how to install oracle 11g rac on the vm ?Refer link:
http://www.oracle-base.com/articles/11g/OracleDB11gR1RACInstallationOnOEL5UsingVMwareServer2.php
Regards,
X A H E E R

How to install drivers for ati radeon 3200?and how to config xorg.co ?

how to install drivers for ati radeon 3200?and how to config xorg.conf?

mawch wrote:how to install drivers for ati radeon 3200?and how to config xorg.conf?
Hello
I am using ati hd 3200 which is integrated with my motherboard. If you are using arch you can download & install through pacman. The package is named like catalyst*. You can install them by issuing as root user
#pacman -Sy
#pacman -S -l | grep -i catalyst
#pacman -S catalyst catalyst-utils
After installation reboot your machine in runlevel 1. (single mode). Ensure "fglrx" module is loaded correctly using
#lsmod | grep -i fglrx
If the resultant output have "fglrx" part the module is loaded correctly. The next step is to create a working /etc/X11/xorg.conf. Backup your current xorg.conf if needed.
#cp /etc/X11/xorg.conf /etc/X11/xorg.conf.bkup
Then issue
#aticonfig --initial --input=/etc/X11/xorg.conf
This will create a new xorg.conf file. Now we can test our confign.
#telinit 3
I am using runlevel 3 to avoid graphic messup!!
issue
#gdm
If you graphical login screen works correctly there is nothing to do more except adjust your monitor resoloution as you like.
To know your ati driver is working correctly issue as root
#fgl_glxgears
If gears are rolling happily it seems correct. You can also know more about installed ati driver
#fglrxinfo
Now the installed driver version is in the output
If there is any problem try following
##### Soloutions to solve various display problems using ATI Catalyst Drivers in Linux #####
yes video playback is choppy until i ran :-
sudo aticonfig --overlay-type=Xv
Try adding the following to the 'Device' section in /etc/X11/xorg.conf
Option "TexturedVideo" "true"
### This is a half solution for mythtv problems. Run mythtv in window (no full screen) If You have a screen resolution of 1024x768 try the command;
mythfrontend --geometry 800x600
Append the "Device" Section of /etc/X11/xorg.conf file as follows;
Section "Device"
Identifier "Videocard0"
Driver "fglrx"
Option "OpenGLOverlay" "off"
Option "VideoOverlay" "on"
Option "TexturedVideo" "on"
Option "TexturedVideoSync" "on"
Option "Capabilities" "0x00000800"
BusID "PCI:1:0:0"
EndSection
Add following in the .bashrc of each user or /etc/bashrc file* Most Effective In My Case!!
export LIBGL_ALWAYS_INDIRECT=true
####### Arch Linux - Add the "nopat" option to the /boot/grub/menu.lst or /boot/grub/grub.conf
####### as in the following example
title Archlinux Ice Kernel
root (hd0,1)
kernel /boot/vmlinuz26-ice root=/dev/sda2 ro resume=/dev/sda3 quiet splash nopat
initrd /boot/kernel26-ice.img
NB: REGULAR DISCLAIMER IS ALSO APPLICABLE TO THE ABOVE MATTER; USE IT AT YOUR OWN RISK !!! ALL THE ABOVE INFORMATION IS COLLECTED FROM VARIOUS POSTINGS IN THE FORUM AND FROM MY OWN EXPERIENCE
Wish U good luck
mvdvarrier

Could you please give me simple manual how to install RAC on 2 VMWare hosts

Hello everyone,
Could you please give me simple manual how to install RAC on 2 VMWare hosts?
There are several such manuals in the Internet but I cannot differ where is good wnd where is not.
Thank you

Moderator Action:
This post has been moved from Database General Questions,
To RAC Installation
for closer topic alignment.

How to install extension for all users?

How to install extensions for all users? I'am using Windows
Vista sp1 x64 and Adobe Extension Manager 2.0.274. "Run as
administrator" doens't work.

Xych wrote:
> How to install extensions for all users? I'am using
Windows Vista sp1 x64 and Adobe Extension Manager 2.0.274. "Run as
administrator" doens't work.
You may have to log in as the Administrator user rather than
"run as adminstrator".
Beyond that, are there really enough users on a system that
they can't install the extension(s) they need themselves?
Danilo Celic
|
http://blog.extensioneering.com/
| WebAssist Extensioneer
| Adobe Community Expert

How to install Workshop for WebLogic and WebLogic Portal?

Hi All,
I am new to Weblogic Portal. I would like to start learning Oracle Weblogic Portals..
Can anyone please guide me, how to install Workshop for WebLogic and WebLogic Portal?
As per the ""Tutorials – Getting Started with WebLogic Portal"" (http://download.oracle.com/docs/cd/E13155_01/wlp/docs103/tutorials/setup_dev_env.html)
we need to install the Workshop for WebLogic and WebLogic Portal.
Please suggest me where should i get the required environments/IDE?
Thanks,
Harish.

Hi Harish
1. If this is your first time with Weblogic Portal, I would recommend to download the latest Weblogic Portal Software Rel 10.3.2 from this bottom link. Check Accept Radio button, for windows download windows installer. Its about 1 GB file. This software includes Eclipse IDE, Weblogic Server and Weblogic Portal.
http://www.oracle.com/technology/software/products/wlp/index.html
2. During the installation process, make sure at one point you select Custom mode (NOT default Typical mode). In next following screens you will see all bundles checked EXCEPT for Samples. So make sure you check Samples Check box both under Weblogic Server and Weblogic Portal. Then proceed. This will install full Weblogic Workshop (Eclipse IDE), Weblogic Server and Weblogic Portal. This is the good installation package. Also it will install samples for Portal and Server. If you select all default typical mode, it will NOT install samples. You can install samples later on also, but its good at installation time itself you select custom and check Samples also.
3. WLP 10.3.2 uses Eclipse IDE. If you are familiar with Eclipse IDE this should be helpful. Otherwise also, its ok.
4. For learning WLP, in Eclipse IDE, you need to create Portal EAR Project, then Portal Web Project. Inside portal web project create simple jsp hello world portlets and a simple portal.
5. For Deploying and Testing Portal application you need to create Portal Domain using config wizard. You can see this from Start -> Programs -> Oracle Weblogic Portal shortcut -> Weblogic Server -> Tools -> Configuration Wizard.
6. You can start Workshop IDE from Start -> Program Files -> Oracle Weblogic Portal ...-> Eclipse For Weblogic 10.3.2
Here are the links for quick start guide for portal development. Please do refer them.
http://download.oracle.com/docs/cd/E13155_01/wlp/docs103/tutorials/index.html
http://download.oracle.com/docs/cd/E13155_01/wlp/docs103/quickstart/newproject.html
HTH
Ravi Jegga

How to install WebGUI for SAP 4.7 EE

Hi
How to install WebGui for SAP 4.7 E.E.
Regards
Srini

For this you need install ITS -->
http://help.sap.com/saphelp_47x200/helpdata/en/34/b20d38df9e9010e10000009b38f8cf/frameset.htm
and read all topiks like
SAP GUI for HTML Requirements
Starting the SAP GUI for HTML
Internet Transaction Server
Regards.

How to Install GRID for EBS

Hi
How to install GRID for EBS applications.Any Docs please let me know
"E-Business management pack for GRID for monitoring EBS applications"

Please refer to:
Note: 394448.1 - Getting Started with the Application Management Pack for Oracle E-Business Suite (Releases 2.0 and 2.0.1)
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=394448.1
Note: 568069.1 - How to Verify Grid Control Version And Application Management Pack Version Integrated With Oracle Applications EBS?
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=568069.1

How to install safari for mac .... after deleting it

how to install safari for mac .... after deleting it
so i had a mallwere saying call the x number so that we can fix ur safari and i didnt call them because its not a USA number . so i had to delete the safari from my mac ... now i want to install it again ... and am not able to do that can someone help me out with that ? thanks...
Karam

You will have to reinstall OS X. In the future ignore such things. Don't click on any links or dial any phone numbers. They are all phishing scams.
Deleting Safari was not a solution.
Remove Browser Pop-up Problems
     AdwareMedic
     Adblock Plus 1.8.9
     remove adware that displays pop-up ads and graphics on your Mac

How to install license for expired SAP J2EE engine?

Hi,
I had used evaluation copy of the SAP J2EE engine. This copy works for few days and now the SAP J2EE engine is stopped. After its expiration, we purchased the permanent license.
My question is: <b>how to install license for the expired SAP J2EE engine so that the engine can be started without re-installation?</b>
Waiting for the reply.
regards,
Anand

Dear Anand ,
To install license of the J2EE Engine :
In the Visual Administrator -> Server 0 -> Services -> Licensing Adapter. Then choose tab page Runtime -> Installed Licenses and Install subsequent temporary license.
check the URL for further details :
http://help.sap.com/saphelp_nw70/helpdata/en/14/5e533e5ff4d064e10000000a114084/frameset.htm
Hope this will help you resolve issue .
Regards ,
Santosh

How to install RAC for a exist single database

Similar Messages

Maybe you are looking for