How to install raid456 module on Pogoplug (POGO-B04)

Hey dudes,
I'm running ArchLinuxARM on my Pogoplug device and tried to setup a raid5-array using the four usb ports. Generally the mdadm setup works well... as log as I choose raid0 or raid1.... raid5 fails because the kernel module doesn't exist.
How can I enable the raid456 module of this kernel build? modprobe doesn't know the module...
I hope someone can help me...

Arch Linux ARM is not supported here; it has its own forum.

Similar Messages

How to install memory modules on a macbook pro 15"

I run Windows 7 via parallels desktop on my macbook pro. How do I type special characters on a Word document using the mac keyboard?

how to install memory modules on a macbook pro 15"
Read the manual / user guide that came with your comptuer or download it from http://support.apple.com/manuals/
I run Windows 7 via parallels desktop on my macbook pro. How do I type special characters on a Word document using the mac keyboard?
Post your question on the Paralells forums: http://forums.parallels.com

How to install Apache module mod_rewrite

Kindly tell me, how to install Apache module mod_rewrite which is a standard module in the Oracle HTTP Server (OHS).. I have installed OAS(10.1.2) but mod_rewrite module is missing..
Edited by: SrinivasanSeniorDBA on 26 Feb, 2010 2:42 PM

Got it

How to install CPAN modules

OS Ver: 10.8.5
I'm just starting to mess around with Perl on my mac, and went to install WWW::Mecahnize, only to find that it would fail via CPAN. After a little digging, i found i needed Xcode command line utilities installed. After that, i found different suggestions of how to continue.
What is the "best practice" to instal CPAN modules? Should i be root? Should i use a custom directory so as not to mess with the apple supported installation? Is there an article on this?

chacham wrote:
Thanx. CPAN via sudo, that just what i needed to know/hear.
Does that mean that you don't need to know a better option?
You can install modules into a private CPAN as a non-root user.
https://wiki.hpcc.msu.edu/display/Bioinfo/Installing+Local+Perl+Modules+with+CPA N
This will avoid lots of hassles.

How to install selected modules to save disk space?

Rapidinstall installs all the modules of the Oracle Applications. But if we want to install only selected modules to save disk space (In R12 disk space requirment is 160+gb) how can we do it?
Thanks and Regards
M.A.Rahman

If you really want to save space, install Vision 11.5.10.2, and upgrade the database to 10.1.0.5. Use the 10g tablespace rename feature to rename all APPS% tablespaces to some other name, can even just remove the APPS_TS from the tablespace names. Truncate applsys.fnd_ts_mig_cmds. The run OATM using uniform 64 KB segment size. The resulting database will be ~40GB, 30GB less than Vision from rapid install.
Then upgrade to R12 via the procedure in Oracle Applications Upgrade Guide: Release 11i to Release 12 (zipped) B31566-01. The resulting footprint will be about 65 GB, almost 100GB smaller than R12 Vision from rapid install.

How to install output module

I am trying to install the Output module with Adobe Bridge and I have followed the instructions on Adobe's site. However,
the instructions say to install the files to path that is non-existent, to my current knowledge.
For example: It's saying to install a folder into library/application support/adobe bridge/extensions.
All I see is Applications/Adobe Bridge CC/plugins and some other folders. Plugins seems like the most related option, so I have already tried to install the folder/file there but still do not see the option to use the module in the Adobe Bridge CC software.
It may helpful to know that this is a brand new computer so maybe the information may need to be slightly adjusted?
Could use some help!
Thanks!
Robbie

No, no, no robbies83etc, STAY THE HECK AWAY from your "Applications" folder! READ CAREFULLY! Geez…
The instructions direct you to the LIBRARY folder
Install Adobe Output Module <=== CLICK on this link to read the whole instructions page.
When Bridge CC shipped, it didn't include the Adobe Output Module, which allows you to create PDF presentations and web galleries. The Adobe Output Module is now available for Bridge CC.
NOTE: This plug-in is optional, and is not officially supported.
What's covered
Install the Adobe Output Module
Handle warnings that appear
Access the output module
Possible issues
Install the Adobe Output Module
Make sure that you have the most recent version of Bridge CC installed. To check for updates, choose Help > Updates in Bridge. Follow the instructions to install any updates.
Download the appropriate file below by right-clicking (Windows) or Ctrl+clicking (Mac OS) and choosing to save the file. Save the file in a location you can remember, such as your desktop.
AOM_Mac_New.zip
Mac OS (10.6-10.10) * Note: Preview in Browser does not work on Mac OS X 10.10.x (Yosemite)
Double-click the downloaded file to decompress it. Open the resulting AOM_Package_Mac, AOM_Package_Win64, or AOM_Package_Win32 folder. This folder contains:
the Adobe Output Module folder
the AdobeOutputModule.workspace file
Copy the Adobe Output Module folder (not the AOM_Package_[OS] folder) into the Bridge CC Extensions folder in the appropriate location:
Mac OS: /Library/Application Support/Adobe/Bridge CC Extensions <=== NOTE that is the ROOT LEVEL LIBRARY
Copy the AdobeOutputModule.workspace file into the Workspaces folder under the Bridge CC Extensions folder (same folder as referenced in step 2...
etc. etc. …

How to install php module into web tier.

Previously oracle http server included built-in php module so i could start php scripts under it but in the newest(web tire) version there is no built-in php module.
But in the docs they say that it is possible but dont explain how to...
So how to?)))

Maybe this will help.
http://www.oracle.com/technology/pub/articles/dev2arch/2007/02/php-java-bridge.html

How to install pgcrypto module for postgresql?

I've been having a look at postgresql for OS X Lion Server and was planning to use it for setting up virtual mailboxes, rather than adding a real new user to the machine every time I need a new mail user. However, it appears that the pgcrypto module is not installed my default, so hashing passwords appropriately within postgresql is not possible.
Does anyone know if it's possible to install the pgcrypto module without starting from source code and completely reinstalling postgresql?
Or alternatively, I'd be happy if anyone could recommend a best-practice for virtual mail users without creating local user accounts on the server.
Cheers,
Andrew.

Despite not finding much in Google or elsewhere, I managed to find the solution to this problem. Seems logical in hindsight, but it took me a lot of running around before I got there.
Download the source code for postgresql from Apple: PostgreSQL-23
Open Terminal
cd ~/Downloads
tar xvf PostgreSQL-23.tar
Edit the Makefile and add pgcrypto to the ContribTools parameter. It should then read "ContribTools = hstore intarray pg_upgrade pg_upgrade_support pgcrypto"
make
sudo make install-contrib
sudo cp /tmp/PostgreSQL/Release/usr/lib/postgresql/pgcrypto.so /usr/lib/postgresql/
sudo cp /tmp/PostgreSQL/Release/usr/share/postgresql/contrib/pgcrypto.sql /usr/share/postgresql/contrib/
sudp cp /tmp/PostgreSQL/Release/usr/share/postgresql/contrib/uninstall_pgcrypto.sql /usr/share/postgresql/contrib/
Don't know whether it was necessary, but I stopped and started postgres with serveradmin at this point. sudo serveradmin stop postgres; sudo serveradmin start postgres
Then just update the databases where you need the crypt functionality. e.g. sudo -u _postgres psql -d template1 -f /usr/share/postgresql/contrib/pgcrypto.sql
That's it. Now when I go into the appropriate database I get the expected return on:
select crypt('thisisyourpassword', gen_salt('bf'));
crypt
$2a$06$5gTpj2O6qyCvLs4iCcnBxuB/uxEdTMBI96fbHyyGOiP.A6t7nfKzC
(1 row)
Hope that helps anyone who is looking to store passwords in their postgresql database that is installed by default with Lion Server. I just didn't want to install postgresql from source (or any other precompiled package) and end up with two independent instances of postgresql running on the same server. Seems a bit messy (and unnecessary) to me.
Cheers,
Andrew.

How to install STREAMS-modules

Hi,
I am a Newbie in writing STREAMS-modules.I have copied the compiled and linked module to /usr/kernel/strmod, but I am not able to push it because calling ioctl/I_PUSH results in an EINVAL error (running strchg also fails). A try to push standard modules like "ldterm" or "u8lat1" succeeded.
After renaming and deleting such a standard module I can still push it by it's old name (but not by the new one).
Perhaps I made a mistake in the procedure of coding, compiling and linking the module, but I can not explain the fact the deleted modules still exist, so I going to believe in metaphysics.
Please help me!
Hendrik Suess

Hi there,
As far as I got your situation, your problem is related to the
fact that you are running the 64-bit kernel (since your modload
searches for modules in /usr/kernel/strmod/sparcv9 directory).
AFAIK, gcc does not build 64-bit modules by default - you have
to force it to do so (if it is at all able to build them).
So the simplest way to check your module is to reboot your station
in 32-bit mode (<pre>boot unix/kernel</pre> from the boot prompt).
However, if you intend to use your module on 64-bit systems, you
should build 64-bit module. The Answerbook contains special chapter
about 64-bit modules/drivers and I've found lots of usefull hints
there.
General tip - GCC is great tool, but if you are developing kernel
modules/drivers - try to use native (Sun) compiler. Ok, it costs
several bucks, but after all it is used by Sun people that develop
the kernel, so it is [almost always] up-to-date and hence will save you lots of time and pain.
Hope, this helps,
Ilya.

How to install LiveCycle Forms ES2

Hi,
We are using adobe LiveCycle ES2 with SP2.
after installing the LiveCycle ES2 and applying the patch, we noticed
that we forgot to check the LiveCycle Forms ES2 to be installed!, now we need this module
my question is how to install this module and add it to our LiveCycle environment ??
thanks
Hussam

You need to re-run the LiveCycle Configuration Manager (LCM) by selecting LiveCycle Forms Module along with existing one. Perform all the tasks you did for the initial installation.
The patched files should be automatically picked from deploy folder while running LCM.
Wasil

How to De-install HRMS module in Oralce EBS 11.5.10.2

Hi,
Can some one please guide me, how to How to De-install HRMS module in Oralce EBS 11.5.10.2
Thanks,

Oracle Applications does not support deinstalling products once it is installed and licensed. So, there is no supported way to deintall HRMS.

How do I install the modules from Business Catalyst into Dreamweaver?

They have changed things around compared to Dreamweaver 6. I have my website on the B.C. website, but don't know how to add the modules on Dreamweaver.

Thanks for the reply. I already have the add on installed. I've had it installed and using it for a few months now. The issue is, unlike the previous version before DW CC, I was able to install the modules on my computer and open them up in D.W. and was able to add the modules to my pages through D.W.
I'll look at the link again and see if that is what it's showing me what to do.

How to Install the Downloaded NetBeans(*.nbm) Modules for Sun Java Studio

Dear All,
I have downloaded NetBeans Modules files with Extension *.nbm, and they are not getting installed, when I double click on them, or if I go through the Update Center and Select the Downloaded Modules even then also they are not getting installed, so please tell me the procedure how to install them.
mahesh.

It would be helpful to know which version of Java SE you are using, what NetBeans modules are you attemping to install, and any pertinent error messages that arise when you try to install the modules. As Jin_B pointed out, check the system/ide.log file in your .jstudio directory for possible error messages.

How do I install Bluetooth module on i Mac G5 17 " 1.6Ghz M9248LL/A 2 GB Ram

How do I install BlueTooth Module in 2004 i Mac G5, 17 in, 1.6 Ghz, 2GB Ram, M9248LL/A. I found one to buy on ebay for this I Mac G5 model for about $13 and before I order I wanted to know if anyone has installed Blue Tooth on this i Mac G5 model. The i Mac G 5 Guide shows how to install an Airport Extreme card for internet wifi and indicates that you can add Blue Tooth but not how to install it

Kappy,
iFixIt is helpful, clear photo instructions on locating and replacing Bluetooth module of my I Mac G5 model. Will use it for other issues with my mac. Great Tip. Thanks a million.
user448800

How to install Spectral Measurements and Modulation Toolkits for multiple versions of Labview

I installed NI-RFSG, NI-RFSA, the Spectral Measurements Toolkit, and the Modulation Toolkit. I have both LabVIEW 7.1 and 8.0 installed on my system. I developed an application in LV 8.0 and now I need to revert it to LV 7.1. The problem I am having is that add-on toolkits seem to only have been installed for LV 8.0 because there are several missing VIs and controls when I try to open the LV 7.1 version. I tried re-installing the toolkits, but this is not fixing the problem. How can I get the installer to install the toolkits for both versions of LabVIEW?
Thanks for your help,
Cherie
Solved!
Go to Solution.

Hello Cherie,
it's a know issue. You can read it in the modulation toolkit readme :
Two Versions of LabVIEW Installed
The installer supports installation of the Modulation Toolkit into a single
version of LabVIEW; installation of the Toolkit into multiple separate
installations of LabVIEW (for instance LabVIEW 7.0 and LabVIEW 7.1 installed
on the same PC and in separate directories) is not supported or recommended.
An unsupported means of doing so though involves manually copying files from
one LabVIEW installation to another. To do so, you can install the
Modulation Toolkit to the home directory of one LabVIEW installation, and
then manually copy the installed files to the other LabVIEW installation.
The following list includes pertinent directories and files. Copy all files
from these directories, including any subdirectories, using the equivalent
relative paths to the LabVIEW home directory for the target.
<LabVIEW Home>\vi.lib\AddOns\Modulation\*.*
<LabVIEW Home>\vi.lib\AddOns\NISML\*.*
<LabVIEW Home>\examples\Modulation\*.*
<LabVIEW Home>\resource\objmgr\NIMTAttribs.rc
<LabVIEW Home>\resource\objmgr\NIMTAttribs.rch
<LabVIEW Home>\help\lvmod.txt
<LabVIEW Home>\help\lvmod.chm
<LabVIEW Home>\help\lvdmt.txt
<LabVIEW Home>\help\lvdmt.chm
Note that this listing does not include all installed files. Also, copying
files in this manner is not equivalent to a full installation into the
alternative version of LabVIEW. Most notably error text unique to the
Modulation Toolkit will not be updated and the Example Finder listings will
not show the Modulation Toolkit examples.
jerome
"CherieC" <[email protected]> a écrit dans le message de news:
[email protected]...
>I installed NI-RFSG, NI-RFSA, the Spectral Measurements Toolkit, and the
>Modulation Toolkit.  I have both LabVIEW 7.1 and 8.0 installed on my
>system.  I developed an application in LV 8.0 and now I need to revert
>it to LV 7.1.  The problem I am having is that add-on toolkits seem to
>only have been installed for LV 8.0 because there are several missing VIs
>and controls when I try to open the LV 7.1 version.  I tried
>re-installing the toolkits, but this is not fixing the problem.  How
>can I get the installer to install the toolkits for both versions of
>LabVIEW?
>  
> Thanks for your help,
> Cherie

How to install raid456 module on Pogoplug (POGO-B04)

Similar Messages

Maybe you are looking for