How to install Real Time Conference component?

Hello everybody!
It's possible to install the "OC4J_imeeting" the OCS webconference component, when i've an already installed and configured OCS infra and middle tier? If it can be done, how can i do it? Trough OUI? I don't have the "OC4J_meeting" listed on the OCS applications Tier, so, i need to install it. Someone have already installed in environment like this?
Thanks!!

i have a related problem i don't know from where i can configure RTC, i clicked on the button "Configure Components" as you mentioned before but the RTC is not listed,
please help me because nothing works....
Thanks

Similar Messages

  • How do I install real time player on ipad ?

    Can not install real time player also can not install adobe player are there other programs that can be used to view video on comcast.net

    You can only install apps that are available in the iTunes App Store on your computer, or the App Store app on your iPad - 'normal' PC or Mac software cannot be installed on the iPad, they are not compatible.
    Flash player is not, and probably never will be, supported on the iPad : http://www.apple.com/hotnews/thoughts-on-flash/ . Plus it would be up to Adobe to make a version of their flash player that works on iOS devices - something which they have never managed to do and which they have now apparently given up on trying to do.
    Browser apps such as Skyfire, iSwifter and Puffin 'work' on some sites, but judging by their reviews not all sites. Also some websites, especially news sites, have their own apps in the App Store, so your could try checking there to see if the site(s) you use have their own app(s).

  • How to Integrate real time data between 2 database servers

    How to Integrate real time data between 2 database servers
    May 31, 2006 2:45 AM
    I have a scenario where the data base (DB2 400) is maintained by AS 400 application and my new website application based on j2ee platform access the same database also but the performance is very low. So we have thought of introducing new oracle data base which will be accessed by j2ee application and all the data from db 400 database will be replicate to oracle data base. In that scenario the only problem is of real time data exchange between 2 databases. How do we achieve that considering both the application As400 and j2ee website application are running in parallel and accessing the same information lying on DB2 400 database. We have to look at transaction management also.
    Thanks
    Panky
    DrClap
    Posts:25,835
    Registered: 4/30/99 Re: How to Integrate real time data between 2 database servers
    May 31, 2006 11:16 AM (reply 1 of 2)
    You certainly wouldn't use XML for this.
    The process you're looking for is called "replication". Ask your database experts about it.
    I predict that after you spend all the money to install Oracle and hire consultants to make it replicate the DB2/400 database, your performance problem will be worse.
    panks
    Posts:1
    Registered: 5/31/06 Re: How to Integrate real time data between 2 database servers
    May 31, 2006 11:55 PM (reply 2 of 2)
    Yeajh I now that its not a XML solution.
    Replication is one of the option but AS400 application which uses DB2/400 DB is highly loaded and proposed website also uses the same database for retrieval and updation purpose.All the inventory is maintained in the DB2/400 database so I have thought of introducing new oracle database which will be accessed by new website and it will have all the relevant tables structure along with data from DB2/400 application. Now whenever there is a order placement from new website then first it should update the oracle database and then this data shuold also migrate to db2/400 application at real time so that the main inventory which is lying on db2/400 should be updated on real time basis because order placement is aslo possible from As400 application. So the user from As400 application should not get the wrong data.
    Is it possible to use MQ products??
    -Panky

    Hi,
    the answer to your question is not easy. Synchronization or integration or replication data between 2 (or more) database servers is very complicated task, even though it doesn't look like.
    Firstly I would recommend to create good analysis regarding data flow.
    Important things are:
    1) what is primary side for data creation. In other words on which side - DB2 or Oracle - are primary data (they are created here) and on which side are secondary data (just copies)
    2) on which side are data changed - only in DB2 side or only on Oracle side or on both sides
    3) Are there data which are changed on both side concurrently? If so how should be conflicts solved?
    4) What does it mean "real time"? Is it up to 1 ms or 1s or 1 min or 1 hour?
    5) What should be done when replication will not work? I mean replication crash etc.
    BTW. The word "change" above means INSERT, UPDATE, DELETE commands.
    Analysis should be done for every column in every table. When analysis is ready you can select the best system for your solution (Oracle replication, Sybase replication server, MQ, EJB or your proprietary solution). Without analysis it will be IMHO gunshot into the dark.

  • HOW TO INSTALL REAL ICSr6 in Live With Walkman

    Hi,
    Does any body know hoe to install real ICSr6(http://forum.xda-developers.com/showthread.php?t=1707876) in LWW.
    First of all i rooted my phone with the simple steps mentiond by nabeel in http://talk.sonymobile.com/thread/41119?start=0&tstart=0
    After root my phone i download the real icsr6 from the xdadevelopers site and also i done the CWM mode in my phone.
    then copy the realICSr6 in SDcard and reeboot it in CWM mode
    then follow the steps mentioned in the site http://forum.xda-developers.com/showthread.php?t=1707876
    but while installing the ICSr6 in CWM mode i stuck in one place idont know which one should i select. There is an option to instal with Locked Bootloder and Unloked boot loder.
    Itried both the loked and unloked bootloder
    but after installing with locked bootloder i rebooted the phone then it shows SONY logo then it get stuck in ANDROID logo then continousely restaring the phone.
    With the unlocked bootloder it stuck in SONY logo. and then contionousely rebooting.
    Please help me to instal the real ICSr6 with the step by step process.

    Hi
    I successfully installed the Real ICSr6 in my LWW.
    Below i am mentioning the steps to how to install Real ICSr6, i think it may be helpfull to somebody to install this.
    First of all u should root your phone, Then install the CWM mode, then fastboot the kernel, and then install the Real ICS r6 from SDcard.
    How to Root LWW or Xperia 2011 series mob's.
    http://talk.sonymobile.com/thread/41...art=0&tstart=0
    For installing the Real ICSr6 u should unlock the bootloder. For unlocking the boot loder for Xperia 2011 series phone u should get the unlocking code from the sony mobile site (http://unlockbootloader.sonymobile.com/ ) follow this link and get the unlocking bootloder code.
    For unlocking the boot loder Download the "fastboot" drivers from here. Install them accordingly.
    Turn off your phone. Wait for 30 seconds. Connect your phone to the PC while keeping the volume up key pressed. Your phone's LED will lit blue (indicating fastboot mode).
    Head over to the location where you kept the previously unzipped fastboot folder. Right click while keeping pressed the SHIFT key on the folder and select "Open command prompt here"
    Type fastboot.exe -i 0x0fce getvar version to ensure your have entered bootloader mode (you will get version on java example, 0.3)
    Type fastboot.exe -i 0x0fce oem unlock 0xKEY (replace KEY with unlock code you got from Sony's website earlier)
    !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! BOOTLODER IS UNLOCKED !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    then disconnect the mob from ur PC.
    FLASHING KERNAL
    For Installing Real ICSr6 u should use the kernal MESA(recomended), KRsH Kernel ICS, EXtended Stock Kernel
    for downloading u can visit http://forum.xda-developers.com/show....php?t=1707876
    After downloading this.
    Open the flash tool that u earlier installed for rooting ur mobile.
    Click on the lightning bolt sign and select "Fastboot mode" and click OK.
    Switch off ur Mobile and press the Vol UP key and connect it ur computer. Now your phone is in fast boot mode.
    Now Click on "select kernel to flash" in Flashtool.
    Browse to the folder where you placed the *.img file and select it.
    Flashtool will install the kernel into your phone. Disconnect your phone from the PC. Wait 30 seconds.
    !!!!!!!!!!!!!!! Now successfully install the KERNEL !!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    Installing The Custom ROM (Real ICSr6)
    First of all copy the Real ICSr6 file in ur phones SDcard.
    Then Turn your phone on. When you see the Sony or Sony Ericsson logo on the screen, keep pressing the volume down key. It will take you to the CWM recovery mode, which was installed automatically with the kernel.
    Use the volume up and down keys to navigate through menu items and the Home key for selecting.
    Do a full wipe (format data, system, cache, Dalvik cache and battery cache).
    Choose "install from SD card" and then select "choose zip file". Select the ROM file first (MiniCMSandwich Lite Final v4).
    It will take you to the very much intuitive Aroma installer, which is very easy and much like installing an operating system on your PC.
    After finishing the installation, your phone will reboot. While rebooting, enter the CWM Recovery again using the volume down key.
    This time, do not wipe anything. Just select "install zip from SD card" and point to the wifi modules zip file. Similarly, install the Google Apps zip file.
    Turn off your phone from the CWM Recovery menu.
    Turn on your phone, first boot may take a long time, do not worry.
    Now you should get a pure AOSP flavor in your Xperia device.
    !!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Enjoy the New ICSr6 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    Thanks to all developers XDA.
    HIT HELPFUL ANSWER IF I HELP U
    Message was edited by: abheesh

  • How to use Real time execution trace toolkit with Dual-core processor??

    hi there
    the situation as follows:
    i have a computer (PC and Laptop) types with Dual-core processors, and am trying to do simulation using Multi-core technology and based on different simulation scenarios...starting from sequantial processing,.......Piple lining processing strategy. so that i can differentiate the time delay between those types of processing based on (Using 1 processor then dual-core processor Computers)
    my question is: As i read through Ni's white papers i saw many notes refer to Real-time execution trace toolkit to investigate the (processing-time , etc) of multi-core processors in processing diffenent algorithms. My algorithms are to be run on 1 computer with dual-core processor BUT, not in real time environments, that is ( No hardware to be connected to my pc) only algorithms running on my pc....
    So, is it possible to use Real time execution trace toolkit  or anyother tools in LabVIEW to show processing-delays and/or anyother timing critical issues without using my application for  real- time hardware.???
    in other words: how to use Real time execution trace toolkit  in non-hardware and/or real-time scenarios???
    please help me in this.
    Any suggestion, comments, feedback.....is absolutely highly appreciated
    thanks a lot in advance
    Labview Lover

    Hey,
    The Realtime Execution Trace Toolkit only works for NI RT Targets.
    But you can use the Desktop Execution Trace Toolkit, just search for it under ni.com.
    Christian

  • Install real time 8.6 problems

    Hello all,
    I´m trying to install Real Time 8.6 on a Desktop target. I ran the verification tool and it says that it´s a compatible target.
    I created the Desktop PC utility usb drive and formatted the target with no problems.
    When I restarted the PC the network card was initialized with the following address: 169.254.81.194 and it doesn´t show up on MAX.
    It should have started with 0.0.0.0 so that we could then configure the IP Address.
    Am I doing something wrong?
    thanks,
    Adam
    Solved!
    Go to Solution.

    Hi Maxime,
    First I was installing the real time on a desktop connected with a cross over cable and when I tried to see the target on MAX it didn´t show up.That was when I posted this question here.
    This morning I started from scratch and instead of connecting directly using a cross over cable I connected the target to our LAN. The IP address was the same but I was able to change it.
    However I have some questions:
    In Labview 8.5.1 (in this same target) when I installed real time the default IP was 0.0.0.0. Has this changed?
    I tried (with Labview 8.6) to change the IP to 10.0.0.100 and connect to it using the cross over it responded to ping but did not show up in MAX. Any ideas why?
    Network interface: 10/100 Base-T Intel® 82562.
    No error apears on the screen of the target. 
    Thank you,
    Adam

  • How to implement real-time refresh datas in obiee?

    How to implement real-time refresh datas in obiee?

    Can you elaborate more...
    If you want to see refreshed data in OBIEE Reports, you need to implement Caching mechanism based on how you often refresh warehouse..
    [http://download.oracle.com/docs/cd/E05553_01/books/admintool/admintool_QueryCaching6.html]

  • How to get real time information about how many user are logged in and thei

    I use tomcat as my server platform in Ubuntu for a war file.
    I know in order to get real time information about how many user are logged in, we can count how many active sessions exist by a SessionCounter code. However, I have to permit HttpSessionListener in web.xml of tomcat. From other users' experiences, the configuration is complexed and has some errors.
    Here's the link:http://www.stardeveloper.com/article...1112001&page=1
    In order to get users' ip, in jsp, use request.getremotehost() or
    request.getremoteaddress() by editing the jsp file.
    I wonder if there's some open source software to use for these two purposes.
    Thank you!

    That url is missing a few bits. The ... in the middle doesn't help.
    we can count how many active sessions exist by a SessionCounter code.
    However, I have to permit HttpSessionListener in web.xml of tomcat.
    From other users' experiences, the configuration is complexed and has some errors.And have you tried it? The configuration isn't that complex.
    What errors do you mean? Errors in tracking people, variance in the count? Probably related to internet issues and nothing you can do will alleviate them.

  • How to set real time waveform chart

    I would like to record voltage signal from built-in microphone. My block diagram is attached.
    I would to like record 1second data every 10min and then take an average of that 1s data so that I have 1 data point about every 10min. The time of the origin of the chart must be kept at start date and time all the time and the program need to run until I stop it. 
    But I cannot set the date and time to be real time. How can I make it?
    Thank you very much.
    Attachments:
    1.vi ‏41 KB

    Hello
    answers are in blue
    phx wrote:
    Freelance_LV, Thank you very much for your editing, I am testing the program. I have some questions.
    1. Why can't I just using continuously running to run my program to make to run continuously? it is a good practice to use a while loop and run the code, than use the run continuously button. my understanding is that the run continuously button will cause the code to run at the highest possible processor speed and will use up the entire load on the processor. by using a while loop and placing a small delay, we can ensure that the cpu is not loaded by our program. But, i hope our seniors could provide the correct explanation to it.
    2. From your diagram, what I realise is that in 3600s, the signal of time sends data to "elapsed time" every 0.1s until the elapesd time is the same as target time so the the "True/False" Loop" can run. My question is, once the the "True/False loop" start runnig, how long does it run? 1second? Or is my understanding about the flow wrong? check the attached code. i made some additions, to answers your question.
    3. The minimum sample rate of the "acquire sound" is set to 11025Hz which is also the sample length of the "Mean". Does it mean that the mean it takes is the mean of the amplitude of latest 11025 samples? would suggest you use Mean vi than the Mean Pt to Pt vi. logically, the mean vi should read the input array of data, calculate the mean of the values. there is no 'latest' here. the mean vi gives the mean value of the array at its input. the acquire sound vi will read the data from the microphone at the sample rate mentioned. you said the min sample rate if 11025 Hz. but your code shows 8000 Hz as input!
    4. Why isn't the x-axis the current time if I just put the diagram inside the True/False Loop out to a new VI? you will need to set the start time of the X-axis using the property node X-axis range minimum value. Else, the chart/graph will take the standard start time as 1/1/1981 and 0.00 time + or _ the GMT zone.
    Thank you very much!!
    Attachments:
    1_edit.vi ‏68 KB

  • How to make real-time report per subscriber ( SCE2020)

    From the link below Cisco SCA BB SNMP Real Time Monitoring User Guide, 3.1
    http://www.cisco.com/en/US/products/ps6135/products_user_guide_chapter09186a008084ddc8.html
    it only make report on the global bandwitdh does anyone have i 3rd party software or good document on how to do snmp real-time report per subscriber?
    Thanks in Advance.

    SCE platform supports a limited set of variables that may be configured via SNMP (read-write variables). Setting a variable via SNMP (as via the CLI) takes effect immediately and affects only the running-configuration. To make this configuration stored for next reboots (startup-configuration) the user must specify it explicitly via CLI or via SNMP using the Cisco enterprise MIB objects.
    For the further details for the SCE follow the below url which will help you:
    http://www.cisco.com/en/US/products/ps6134/prod_configuration_guide09186a008078b43a.html

  • How to get real time date from Sunny Boy Inverters through SMA Webbox?

    Hello,
    I was looking on how to communicate with three Sunny Boy Inverters that are linked to a SMA webbox. Currently we get a daily summary of the solar production, but we would like to have real time data uploaded into LabVIEW. The people of SMA said that I needed to use "RS485 protocols" with a software they have called YASDI (http://www.sma.de/en/products/software/yasdi.html); however, I keep finding other information that says that I can communicate with my inverters using the SMA OPC server (http://www.sma-america.com/en_US/products/software/sma-opc-server.html). I also found this forum, http://forums.ni.com/t5/LabVIEW/Sunny-Island/m-p/809129/highlight/true#M368718, where I understood that I don't need to use the OPC server, but instead I can use UDP communication to get the data. I found another forum that talks about using the YASDI :http://forums.ni.com/t5/LabVIEW/help-with-Sunny-Boy-inverter/m-p/293273/highlight/true#M153892. 
    I've tried to communicate with the people of the forums and I haven't gotten any responses; therefore, I wanted to see if I can get cleared up on this issue. Do I need to use OPC server to communicate with my inverters through the webbox or can I just use UDP in LabVIEW?
    Any help would be greatly appreciated,
    Thanks
    Jose

    Hello,
    I got a response from Vincezo: http://forums.ni.com/t5/LabVIEW/Sunny-Island/m-p/1794786. I'm currently working with the VI to communicate with the webbox through UDP. Since the PRC protocols to communicate with the webbox are in JavaScript Object Notation (JSON), I'm not sure if the data-in string has to be in JSON format. However, the only error I'm getting is 56 in the UDP read function. I've tried increasing the size of the bytes and timeout, but I keep getting this error. If anyone can help me with this part I would very grateful. 
    Thanks,
    Jose

  • How to install Order Release Management component

    Hi All,
    I am running APPS R12. I want to install Order Release management component. Can any one help me how to install this component individually.
    Regards
    Nadir Pervez.

    Check the following thread, and follow the steps outlined there. Instead of AX module, search for the product/module which you want to add:
    Add AX module to my system
    Re: add AX module to my system

  • How to create real time chart with candle stick for displaying Open, High, Close, Low values from BSE/NSE EOD data

    Please help with sample windows form C#.Net Example

    Hi Goutam,
    Please refer to the following link with examples: http://www.codeproject.com/Questions/234865/create-real-time-chart
    Hope this helps you!
    Regards,
    Mitch!

  • How to disable REAL TIME QUERY in DG 11gr2 ?

    Hi,
    With 11gr2, by default, on STARTUP, the standby database is open
    -> in READ ONLY mode
    -> with Intended State: APPLY-ON
    so the ACTIVE DATAGUARD option is in use ....
    is there a way to deactivate REAL TIME QUERY permanently,
    so whether on STARTUP or STARTUP MOUNT, the standby stay only mounted with Intended State: APPLY-ON
    The only way i found is to do the following :
    SQL> startup
    DGMGRL> edit database 'PHNXENT' set state='APPLY-OFF';
    then
    SQL> startup mount
    DGMGRL> edit database 'PHNXENT' set state='APPLY-ON';
    but this can leads to mistake ....
    Thanks

    it is for standalone database (not RAC)
    yes, users can start the database with mount option, but they have to keep in mind that they do not have to issue a "STARTUP",
    so it is a production rule that oracle doesn't handle.
    Second, it will give a little more complexity in startup scripts (first mount, identify the role, and then open if it is a primary.
    In 10gr2 just startup in all cases ....
    that's why i'd like to know if there is a possibility to permanently disable REAL TIME APPLY ...

  • How to create Real Time Infocube in BW

    Hi BW Experts,
    We got one requirement. We need to create one Real Time Infocube.
    Our Users will enter the data in Query Analyzer later.
    Please can anyone tell me the step by step.
    Is there any settings we need to give..
    Thanks & Regards
    Anjali

    Hi,
    Creating a Real-Time InfoCube
    When creating a new InfoCube in the Data Warehousing Workbench, select the Real-Time indicator.
    Converting a Standard InfoCube into a Real-Time InfoCube
    Conversion with Loss of Transaction Data
    If the standard InfoCube already contains transaction data that you no longer need (for example, test data from the implementation phase of the system), proceed as follows:
           1.      In the InfoCube maintenance in the Data Warehousing Workbench, from the main menu, choose InfoCube ® Delete Data Content. The transaction data is deleted and the InfoCube is set to inactive.
           2.      Continue with the same procedure as with creating a real-time InfoCube.
    Conversion with Retention of Transaction Data
    If the standard InfoCube already contains transaction data from the production operation that you still need, proceed as follows:
    Execute ABAP report SAP_CONVERT_NORMAL_TRANS under the name of the corresponding InfoCube. Schedule this report as a background job for InfoCubes with more than 10,000 data records because the runtime could potentially be long.
    Try
    http://help.sap.com/saphelp_nw04s/helpdata/en/39/100c38e15711d4b2d90050da4c74dc/frameset.htm
    Hope this helps.
    Thanks,
    JituK

Maybe you are looking for