How to install remote desktop connection?

I have been trying to install RDC on my mac with the latest OSx which is 10.8.5. However, the installation process keeps telling me that it requires OSx version 10.6 or higher. I have got my mac checked at the apple store and there is nothing wrong with it. But the installation still doesnt work.

CoRD: Remote Desktop for Mac OS X

Similar Messages

How to configure Remote desktop connection double sign-on?

All dear,
I need help. I install a terminal server 2012, but when I try to remote login, only once sign on. How can I to configure the server to double sign-on.
Thanks

If I understand you right you have custom credential provider on the server. In this case Microsoft says that it is impossible to overcome double sign-on, just search for the "RDC and Custom Credential Providers" on the Internet.

Remote Desktop Connection - viewing screen

Hi, I just installed Remote Desktop Connection on my Imac at home so I can access my work PC. Everything works fine but my image I view is only about 5" x 6". It seems like a waste of the 27" screen. Does anyone know how I can increase the size of this so I can access the whole screen?
Thanks

Hi and welcome to Discussions,
personally I use Screen Sharing for accessing my work PC but I think this also applies to RDC.
What you get on your iMac is the screen resolution of your work PC when using RDC.
Since the 27" iMac has such a high resolution natively (2560x1440) the RDC window might be quite small when your work PC uses a resolution of 1280x1024 (as an example).
You might try to raise the resolution of your Work PC (should be possible through RDC when the resolution change on your Work PC is appliable without a restart of it) but eventually might come to a barrier when reaching the highest resolution possible on your Work PC.
Also keep in mind that the higher the resolution of the Work PC is, the more data has to be transfered which might slow down your RDC connection to a crawl.
Regards
Stefan

WIN remote desktop connection

i am a new mac user need to download and install remote desktop connection for mac have tried several times after download all i have is a excel doc.
i need it to work with Terminal Server 2003
mac bookpro Mac OS X (10.4.8)

You need to install Stuffit Expander, available free from Stuffit.com to open the download.

Why, when I successfully connect to Server 2012 Essentials R2 via Anywhere Access does the Remote Desktop Connection use the self signed certificate for RDP instead of the SSL certificate I installed when I set up access anywhere?

Scenario:
Windows Server 2012 R2 Essentials
I purchased an SSL Cert from GoDaddy and I managed (after some challenges) to set up Anywhere access to use that new SSL Cert. I to rebooted the server and I am able to login to Anywhere Access vis https (using the SSL certificate) from PC, Mac and iOS.
So far so good.
The problem I am having is that when I click to launch a remote desktop connection to the server RDP connection wants to use the self signed SSL certificate of the server rather than the SSL Certificate I installed into Anywhere Access. As a result, I get
a security warning like this: "The identity of the remote computer cannot be verified. Do you want to connect anyway?"
The name in the certificate appears as ACME-SERVER.ACMEDOMAIN.local instead of the SSL Certificate I installed, which is
remote.acmedomain.com
If I lick to accept, RDP does work fine, it;s just using a self signed certificate. I want it to use the trusted certificate that I purchased and installed.
My guess is that there must be an additional step to tell Anywhere Access that when it generates the RDP session that it should use the cert? OR, is this just how it works?

Because....
the server does not have a 'trusted' certificate assigned to it.
Only the RDP Gateway has the trusted certificate for the external name.
If you want to remove that error, you have to do one of the following:
Make sure your domain uses a public top level domaim, and get a public trusted certificate for your server.
So, something like,
server.domain.publicdomain.com
Or,
Install that certificate on your remote computer so it is trusted.
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+

I have an Ipad 2 and here is what I am trying to accomplish. On my laptop I connect to a remote desktop connection to access a shared program we use for reporting. How do I set up my Ipad to access this remote server? Thanks for the help.

I have an Ipad 2 and here is what I am trying to accomplish. On my laptop I connect to a remote desktop connection to access a shared program we use for reporting. How do I set up my Ipad to access this remote server? Thanks for the help.

Close ... before going for a specific Cisco app ... lets find out some details:
Host we need more details:
What is your server environment (Windows Server, or Mac OS X Server, or Linux)?
What security is implemented in your environment - as what is restricted (RDP for all or specifc credentials on all machines? Are you part of local admin group to the server you wish to connect)?
Does your environment Support CISCO IPSec connection? If so use Settings> VPN and IPSec tab to enter VPN details, if not then go with above suggestion. IF your restricted to RSA then either built in VPN settings or 3rd party app for RSA would suffice.
Finally, there are many RDP applications out there I use "Mocha RDP Light" (free minimal ads when launched not when connecting).

How do I find out my MBP's 'server name?' to run Remote Desktop Connection?

How do I find out my MBP's 'server name?' to run Remote Desktop Connection?

Hi Dave,
You need to type the server name that was assigned by your mail administrator for the server running Exchange. So please ask your administrator for the Server name. Thanks for your understanding.
For more information, here is an article for your reference.
Add or remove an e-mail account
https://support.office.com/en-ca/article/Add-or-remove-an-e-mail-account-ff7c7735-6117-4b0d-aef6-8aa8a072f60f
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Server 2012 RTM Remote Desktop Connection Broker Role Won't Install

Hey guys,
I have been searching for and trying fixes for this for 3 days, and I've gotten no where. Thanks in advance for trying to help me out.
Here's the situation:
I have a brand new installation of the Windows Server 2012 Datacenter 64-Bit RTM from MSDN. This is my one and only server (just my personal one for home), so I'm using this single server to run all of the services that I need. After a fresh
installation, I added the AD and DNS roles and promoted the server to the PDC. Then I go to add the Remote Desktop Virtualization Services (the VM virtualization role). The installation fails, but I can't find any explanation as to why.
I've wiped out the OS and reinstalled from scratch at leat 15 times, trying various combinations, fixes, approaches, etc. including powershell, Remote Desktop Services Deployment, standard role-based deployment, etc.
Using the role-based deployment, I can get every 'Remote Desktop Services' component to install except the Remote Desktop Connection Broker. I've tried enabling RDMSUI_TRACING, but didn't get any information at all as to why it's failing. I also
cannot find RDMSDeploymentUI.txt log.
I've also tried to deploy this using Powershell using this command:
New-SessionDeployment [-ConnectionBroker] <string> [-WebAccessServer] <string> [-SessionHost] <string>
That particular item does provide some error messages, but they seem to complain about the Session Host not being able to install due to not being able to find the connection string key in the registry for the Windows Internal Database. However, I can
get the session host and every other component to install using role-based deployment, except the Connection Broker.
I've run an SFC scan, which found no issues. I've also tried applying the one update available in Microsoft Update, and tried it without applying that update (reinstalling between attempts of course).
I'm completely at a loss. Has anyone encountered this before? Any suggestions would be greatly appreciated. Is there a powershell command for just installing the Connection Broker that might provide some additional error information, or any
information at all?
I would greatly appreciate any help anyone could offer. I'm willing to try anything. Thanks for taking the time to read this.
Sincerely,
Dominick

Also Found this:
1. You try to install the Remote Desktop Connection Broker (RDCB) on a server that also has the Active Directory Domain Server (domain
controller) role installed. This configuration is not supported by Microsoft. You need to install the RDCB on a server that does not have this role installed. See: Remote Desktop Services role cannot co-exist with AD DS role on Windows Server 2012 http://support.microsoft.com/kb/2799605
2. If you don’t have the Active Directory Domain Service install, this issue might be caused by the Windows internal database (WID) that
the connection broker installs and the Windows Update KB2821895. If you have KB2821895 installed, unfortunately you can not uninstall this KB. Try to install the Remote Desktop Connection Broker (RDBC) role on a server that does not have this Windows update.
Note: There is currently no official communication from Microsoft that here is an issue with RDBC and KB2821895. However, try the RDBC installation
without this KB and see what happens.
For more information, Refer below link...
http://fabrikam.wordpress.com/2013/07/15/connection-broker-installation-failedremote-desktop-deployment-issues/

Installed the RDS 2012 Server License per user CAL (5pcs) after not allow over two users remote desktop connection problem

I have successfully to installed the RDS 2012 Server R2 per user CAL (5pcs) Open License after is found not allow over two users to remote desktop connection on this Server problem, I try to uninstall the license and then (internet on-line & telephone
call Microsoft Activate Center get the activate key) to reinstall is still same of the result on below problem.
Select a user disconnect so that you can sign in.
There are too many users signed in
User1 Active
User2 Active
() Force disconnect of the user

Hi,
In addition you can also refer following article for RDL configuration.
RD Licensing Configuration on Windows Server 2012
http://blogs.technet.com/b/askperf/archive/2013/09/20/rd-licensing-configuration-on-windows-server-2012.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Messages.app no longer connects to Jabber after App Store auto-installed Remote Desktop Update 3.8.2

Messages.app no longer connects to my company's Jabber server after App Store auto-installed Remote Desktop Update 3.8.2 (even though I never purchased that app). The Remote Desktop app can not be found anywhere on my machines.
I suspect the Remote Desktop update because Messages stopped connecting on my office MB Air after the update but still worked on my home iMac. Next day the iMac received the update and Messages stopped connecting on that machine too.
Messages attempts to connect for several minutes (it's been trying for 30 mins as I type this) and just hangs. Occasional I get the following error message:
Error: Messages lost the connection to the Jabber account 'account'. A network error occurred.
I've tried:
- Deleting and recreating the Jabber account in Messages.app
- Toggling on/off SSL (SSL required by our server)
- Toggling on/off auto detect server and port (port 5222 on our server)
- Deleting every plist, cache, etc., I could find in the Library for any IM client I've ever used
- Checked that Keychain trusts the Jabber server SSL certificate (it is a self signed cert)
- Tried connecting from three completely different networks including the company VPN
- Multiple PRAM resets
- Setup a Google Talk account in Messages - works fine
I'm at a loss...
Kurt

I installed and setup Adium. Adium works but Messages.app still does not connect to Jabber.

I have Remote desktop connection for my mac running osx 10.6.8 and I have a windows xp laptop, I want to have my mac be able to run the windows xp from my pc, how do I do it?

I have Remote desktop connection for my mac running osx 10.6.8 and I have a windows xp laptop, I want to have my mac be able to run the windows xp from my pc, how do I do it?

Hello Fiona,
Congratulations on your new iPhone! You can sync information to your iPhone from your MacBook Pro using the Info tab in iTunes when your iPhone is connected. Use the steps in the following article:
iOS: Syncing your data with iTunes
http://support.apple.com/kb/ht1386
Thank you for using Apple Support Communities.
Best,
Sheila M.

HT201068 In the Ap Store "Updates" window, it says that "Remote Desktop Client Update" was installed today. I never intentionally installed "Remote Desktop". How did it get there, Where is it on my computer, and How can I remove it? Thank You!

In the Ap Store "Updates" window, it says that "Remote Desktop Client Update" was installed today. I never intentionally installed "Remote Desktop". How did it get there, Where is it on my computer, and How can I remove it? Thank You!

I don't know if you have been there, but a very suspicious icon! (Like this one on a NSA satellite: http://b-i.forbesimg.com/kashmirhill/files/2013/12/Satellite-logo-for-spying.jpg) Yikes!
Are they after the French too?!? I thought we were allies?!? Wait a minute . . . I'm an American citizen with the Constitutional Right (which they vowed to uphold when they took their job!) of privacy!!!
What do you think of all this?
How did you find it in the OS?
Do I just trash it with "Secure Empty"?

Having trouble maintaining remote desktop connection with Mavericks. What is this about needing RDC 3.7.1 with Mavericks. I downloaded RDC 3.7.1 but it does not replace RDC 2.1.0 previously installed.

Having trouble maintaining remote desktop connection with Mavericks. What is this about needing RDC 3.7.1 with Mavericks. I downloaded RDC 3.7.1 but it does not replace RDC 2.1.0 previously installed

Lucky you, it did not work for many users (which as it should be) so MS produced a new version, for ML and Mavericks.
It's in the App Store, for free.
FYI, I assume that you were attempting to post a picture, no one can see it (except maybe you) because it is on your computer rather than the forum server.
file:///Users/dbrant/Desktop/About%20Apple%20Remote%20Desktop%203.7.1.webloc
Use the small camera icon in the editor toolbar to post it.
It also looks like you attempted to use Apple Remote Desktop, which does not do Windows.

To install Remote Desktop Services User CAL on Windows Server 2008 R2 Enterprise Edition with SP1

Dear Sir,
Presently we have installed Windows Server 2008 R2 Enterprise Edition with SP 1. And now i would like to install Remote Desktop Services User CAL on this server. I have 25 digit product key of Windows Server
2008 R2 Remote Desktop Services User CAL (20). Downloaded this product key from our MSDN Subscriptions.
Kindly suggest me how to install (CAL server with product key that i have) and configure remote desktop services on my above existing server also how to point other server with my CAL server.
Thanks

Hi,
1. Install Remote Desktop Session Host and Remote Desktop Licensing Role Services using Server Manager.
2. Open RD Licensing Manager (licmgr.exe), Activate your server, then install your license
3. In RD Session Host Configuration (tsconfig.msc), set the Licensing mode to Per User and Specify your RD Licensing server name (itself). If you want you may configure these two settings via group policy setting instead. The path of the
group policy settings is Computer Configuration\ Administrative Templates\ Windows Components\ Remote Desktop Services\ Remote Desktop Session Host\ Licensing
4. You may point other RDSH servers to your RD Licensing server using RD Session Host Configuration or via group policy as mentioned above.
5. Optionally you may consider installing other Remote Desktop Role Services such as RD Gateway, RD Web Access, RD Connection Broker, etc.
-TP

Server 2012 R2 Remote Desktop Connection Broker

I have installed RDS on a server named PLUTO on which Windows 2012 R2 datacenter is in. There is a domain controller (domain name: AGROSY) running on a Linux server. We have used Samba 3.6.6 to control the file sharing system.
When I attempt to install RDS in Server Manager, it states as following: could not retrieve the deployment information from RD connection broker server pluto.AGROSY.
Then, I searched a lot of solutions, e.g. and tried as following:
Enter-PSSession -ComputerName pluto --> which works;
but Enter-PSSession -ComputerName pluto.AGROSY --> which gives the error message as: Enter-PSSession : Connecting to remote server pluto.AGROSY failed with the following error message : WinRM cannot process the request. The following
error with errorcode 0x80090311 occurred while using Kerberos authentication: There are currently no logon servers available to service the logon request.
If I ping the pluto.AGROSY, it works as well.
I have no idea how it can be solved, please help me out. Thanks a lot!

Hi,
Thanks for your comment. Sorry for late reply.
Initially please enable the PowerShell remoting in your case.
Enable-PSRemoting
http://technet.microsoft.com/en-us/library/hh849694.aspx
For FQDN name, please see that RDCB is properly configured and also certificate which you have used for RDS environment must be trusted with its private key and must match the FQDN name of the server. Did you seen the certificate has been properly used and
configured. You can go through following article for certificate and also for configuring RDCB role.
Configuring RDS 2012 Certificates and SSO
Configuring HA for the Remote Desktop Connection Broker in a 2012 RDS Farm
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

How to install remote desktop connection?

Similar Messages

Maybe you are looking for