How to install Romanian Language in Unicode System

Hello,
Please let me know how to install Romanian language in a Unicode system.
What are the steps to install it via SMLT.
What are the profile parameters I have to change.
Other than installation of language, do I have to perform any additional steps for Romanian Language?
Currently we have English, German language in our Unicode system.
Points to be rewarded for any kind of help.
Thanks,
Haleem

Hi,
1.check Delivered Languages service.sap.com/languages.
2.check note 42305
3.In transaction SMLT , Choose Classify Language (Language symbol or F5 )
4.Supplement this language with English or German (Recommended)
5.The language must be defined in the instance profiles so that you can log on in these languages. The relevant parameter is
zcsa/installed_languages.
6.Go to the language for which you want to install extra packages and choose or choose Language --> Import Package
7.in the next screen , enter the path for language packages.
8.start immediately or schedule it .Optionally you can use the target server to exceute this ( to avoid performance issues
,if you are importing in production timings, and you cna exculde this server from logon group )
9.if any problems in importing then analyze the log and restart the import .
10.After importing the languages, you must also import the language data in the Support Packages.Choose Language --->
Special Actions ---> Import Support Packages
11.Go to the language that you want to supplement and choose or Language ---> Supplement Language(this is client specific ,
so execute for each client in your system)

Similar Messages

How to install Russian language in ECC 6.0 ?

Hi ,
Can anybody guide me how to install russian language in the system ECC 6.0 ?
If you send the doc which has step to step explanation or screenshot that will really be benefit.
Thanks
Rajesh

Hi!
1. Get the Russian language package for ECC 6.0
2. Run se38->RSCPINST (Note 42305 - RSCPINST (I18N configuration tool), add language RU and press Simulate
3. Check the log - whether or not Russian locale is installed on your server's operation system. If not - install and configure it
4. add/change required instance profile parameters (transaction RZ10). Language key for Russian is R.
5. Restart application server.
6. Run se38->RSCPINST and press Activate. Check the log.
7. Run transaction SMLT. Add RU language and choose supplemented language. Supplemented language can be selected once!
8. Run import of the RU language (follow the instructions from the help.sap.com)
9. Once the import is finished, check log, if everything is OK run Supplementation.
10. After importing of the RU language, you must also import the language data in the Support Packages it you installed them before language.
11. Use the Russian language by mention RU in a sapgui field when login
Hope it will help. Please ask if something is not clear enough.
If useful please reward points.
Best regards, Elena

How to change the language of administrator system message in outlook

I wonder where is the option which changes the language of the text
related
to : Your mailbox is over its size limit send by the system
administrator ?
Some mailboxes get this message in French and other in
English ?
Is anyone can help me ?
I work with French Outlook 2003 sp2 and
English Exchange server 2000 sp3
I try to change the regional setting on the
server but nothing has changed.
Thanks,

Hi,
Please refer to this duplicate thread below:
http://social.technet.microsoft.com/Forums/en-US/5afe1e1a-82a9-445f-bcce-a76173ceb6bb/how-to-change-the-language-of-administrator-system-message-in-outlook?forum=outlook
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

How to install ftp service on the system?

OS: SuSE Linux Enterprise Server 8
How to install ftp service on the system?
How to check and modify to use it?
I am not able to use FTP.
Regards,
D

Rohit,
If its about installation/Deployment of Agent- then its through SDM,
'configuration' can be manual or Atuomatic:
Manual-> refer the installation Guide which digesh has mentioned -(from page 20).
Automatic- Its through Diagnostics Setup through Solman -(Its bit easy).
Thanks,
Jagan

How to install ABAP as a backend system in my EHP1

I have successfully installed EHP1 composition enviornment from SDN , now i m able to work on
NWDS for JAVA and Enterprise portal . it contains java application server .
but in order to get data from ABAP Backend system from NWDS(JAVA) , I don't have ABAP Backend sysytem , how to install abap backend system with abap application server in my system ????
there is one link to install Netwaever ABAP 7.1 trial version( webdynpro abap and abap application server ) in sdn but in system requirement it clearly mentioned that " make sure that there is no SAP sysytem installed in ur system " .
I need webdynpro java ,webdynpro abap and enterprise portal together but i have only webdynpro java and EP , so how to install abap as a backend system in my EHP1 ?
or any other download link which contain all three ??
please help me ?

Hi,
CE is indeed not double stack. However, it is possible to install both an ABAP and a CE on the same host provided they have different system ids and instance numbers. This works for the current SDN download versions: CE 7.1 and CE 7.1.1 (system id CE1, system number 00) and AS ABAP 7.01 (system id NSP, system number 02).
Needless to say, it is perfectly possible to configure and establish all kinds of connections between the two:
JCo/RFC calls in both directions
Web Service calls in both directions
AS ABAP as a portal backend
publishing system information in SLD
accessing an ESR
accessing a Service Registry (publish + query)
using AS ABAP as user database for the CE
Single Sign-On
Best regards,
Thorsten

How to install ABAP as a backend system in my EHP1 composition enviornment

I have successfully installed EHP1 composition enviornment from SDN , now i m able to work on
NWDS for JAVA and Enterprise portal . it contains java application server .
but in order to get data from ABAP Backend system from NWDS(JAVA) , I don't have ABAP Backend sysytem , how to install abap backend system with abap application server in my system ????
there is one link to install Netwaever ABAP 7.1 trial version( webdynpro abap and abap application server ) in sdn but in system requirement it clearly mentioned that " make sure that there is no SAP sysytem installed in ur system " .
I need webdynpro java ,webdynpro abap and enterprise portal together but i have only webdynpro java and EP , so how to install abap as a backend system in my EHP1 ?
or any other download link which contain all three ??
please help me ?

Hello Shilpa,
in other [thread|Re: ABAP and JAVA version of NW2004s sneak on the same system;, where you have the contribution to the same topic, Raja has written:
earlier i had abap and ep sp16 (first ep was installed and then abap was installed)
I would try on your side to instal ABAP instance now. At worst scenario, you have to make both installation
again on clean up HD.
Bye,
Peter

How to install multi language in Portal?

Hi,
Can someone give me the directions in how to install multi
language in Portal? I found the "langinst.cmd" file under
ORACLE_HOME\portal30\admin\plsql, also another
file "langinst.sql" under ORACLE_HOME\portal30
\admin\plsql\nlsres.
I am not quite sure how I can do that, which file I should use.
And once I installed the multi language, can I just go into
portal to create a new content area and using the multi language?
Thanks for any comment in advance!
Kelly.

Hi Kelly
You need to identify parameters for this file and run file. Its
langinst.cmd for WINNT and langinst.csh for UNIX.
1.     From the dos prompt , go to the following directory on
your server.
     Oracle/iSuites/portal30/admin/plsql/
2.     Set the Oracle_Home to = oracle/iSuites/
3.     Run the command
langinst.csh -s portal30 -p portal30 -o
PORTAL30_SSO -d PORTAL30_SSO -c oid -l ar -available
s - schema
p - password
o - < login server - in your case it may be portal30_SSO >
d - <password- maybe portal30_sso>
c - connect string
l - language (which is set to ar )
ar is arabic which i ve set
Good Luck
Regards
Yogesh

HT3562 how can install new language in iPod..?...

How can install new language in iPod? Like a Karen fonts any of Karen of Karen fonts.....

All you can do is gert a newer model iPod.

How to install multiple language version of photoshop within creative cloud?

How to install multiple language version of photoshop within creative cloud?

You should contact Adobe Support by phone or by chat and get their help in resolving your problems.
Phone support | Orders, returns exchanges
http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Creative Cloud support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html ( http://adobe.ly/19llvMN )

How to install korean language on E6?

How to install korean language on E6?

Language pack can be installed ONLY thru' Nokia Care , provided its available...

How to install chinese language in sap ecc 6.0 unicode system

Hi,
I want to install chinese language in my sap ecc 6.0 unicode system,where i would get chinese language in maraketplace.
guide me for the same where i have to get chinese language,how to install in sap.
Thanku

Hello,
There must be already some value in zcsa/installed_languages in your instance profile.
Now in SMLT check the language information for checking the relevant value for chinese language and add this value to the parameter : zcsa/installed_languages
Regards,
Siddhesh

How to install korean language on my BB Z10???

Dear users,
i recently bought BB Z10, but I couldnt find how to install korean langauge on my Z10,
but as I saw some info that BB Z10 support input Korean language also..
There are choice of many language but not Korean langauge...
if anyone know how to install pls help me...
Tks in advance.

From what I understand, when they roll out to that country, the carrier will activate that country code. Looking at the list of languages supported on the OS10.. Korean is one.
RIM has subscribers from all around the world & to provide the best for them all BlackBerry smartphones has been localized within software as well as in hardware. With the launch of BlackBerry 10 OS the company confirms to equip a massive multilanguage support upto 33 different languages! It supports Hindi input as well as many others on the new ‘Region’ feature. All 33 languages are:
English
French
Italian
German
Spanish
Arabic
Basque
Catalan
Czech
Norwegian
Swedish
Dutch
Galician
Greek
Hebrew
Hungarian
Polish
Brazilian Portuguese
European Portuguese
Romanian
Vietnamese
Hindi
Russian
Turkish
Indonesian
Chinese Simplified
Chinese Traditional
Japanese
Korean
Thai
Danish
Croatian
Finnish

How to put Romanian Language into Instant Portal editor

I have installed Instant Portal. The default site has been created in Romanian Language. But how do I get the Instant Portal generated text items such as (Rich Text item or Expandable Rich Text item) ? When I logon I get the login Screen in Romanian Language (as my Browser runs romania and accept romania as the primary language) so it seems that part of the product supports Romania.
After creating a new Instant Portal using the Portal Builder the NLS characters (ăîşţ) are shown as squares. I respect steps that are documented in the "Working with Languages" topic of the Oracle Instant Portal on-line help and I can't use Instant portal in a Romanian Language.

I am able to copy and paste the Romanian page titles into both the rich text and expanded rich text items and have them render the same. Could you answer a few more questions to help diagnose the behavior you are observing? What is your browser language set to? Have to tried setting the portal session language to Romanian using the Set Language portlet, instead?

How to install macedonian language

Hi,
Can anyone clear me about macedoninan laguage (MK)import.(ECC6)
Is that comes with the instalation Cd ?
Thanks
Umakant

Hi,
First make sure that this ECC 6 is a new installation, which means it is definitely unicode.
If it is an upgraded system then it may or may not be Unicode and my friend as we all know,
for language support your system should be unicode.
Regards,
Sai R.

E72: How to install other languages?

I want to install portuguese (br) language, Is it possible? How to install?
I have a little problem in input language cause the english input don´t have accents (if have I don´t find )

only a Nokia Care point can do this. just visit one http://europe.nokia.com/support/repair-and-recycle/repair/care-points
If you want to thank someone, just click on the blue star at the bottom of their post

How to install Romanian Language in Unicode System

Similar Messages

Maybe you are looking for