How to install SATA on VIA K8M890 chipset board

Hi,
When trying to install winxp - the installation doesn't recognize my sata hd.
I didn't receive any diskette with my compute.
Does anyone have any suggestions?
Thanks,
Gidon.

Is the Hitachi drive a SataI or SataII.
Here is the Info MSI gave;
On-Board SATA
• Two SATA ports by VIA® VT8237A
- Supports storage and data transfers at up to 150MB/s
- Supports RAID 0, 1 and RAID 0+1
MSI Reminds You...
• The RAID setup floppy disk is optional depending on the districts. You can download the files from the website to make the setup disk.
So according to that the SATA Controller is a SataI and your drive must be set to that via the jumpers if it is a SATAII. The only thing you should need the floppy for is RAID. The Floppy is optional so it looks like it does not come in the box.

Similar Messages

Novice - How To Install SATA Drive on K8N Neo2 Platinum

My current 2 SATA drives are almost at max capacity and hooked up to SATA 3 & 4 slots. How do I go about installing a new SATA drive on slot 1 or 2? I thought SATA was plug n play and all I had to do was enable SATA ports 1 to 4 in BIOS. I've searched online and found articles pertaining to limitations on SATA slots 1&2, RAID configuration, VT8237 & Promise 20579 drivers --- and I am utterly confused
This is the hard drive that I've been eyeing. http://www.newegg.com/Product/Product.asp?item=N82E16822148144 I only want to attach it to a bay in my PC and use it as storage, not install Windows. Can someone provide clear cut directions for a novice like me on how to install it?

Enable the sata ports, which you intend to use with it.
Jumper drive to sata I mode.
Connect new drive.
Boot into windows and go to disk management where you will see it listed.
You will need to partition and format it there.
Once completed it will show up in My Computer and be ready to use.
http://www.pcstats.com/articleview.cfm?articleid=1778&page=6

How to install the license via configtool

Hi
I just install Portal 2004S and I am at the point of installing the license via the configtool.
When I am opening the configtool, it ask me if I want to use the default DB settings
I say yes and its not able to connect to the DB..
I have install Oracle 10 successfully.
any ideas??
JF

Hi
Do you know where in the keystore what to do. Is there a document with the steps that I can download?? or maybe you know the steps
the last one I did, I was on portal 6.2 and you do that threw the portal itself..
JF

How to install reader & patches via GPO?

I need to know the proper way to install Adobe Reader via GPO, as well as what to do about patches when they come out?
I have seen too many different ways online, I'd like an official way.
Thank you in advance.

This page should give you all the information you need, especially the Administration Guide: http://www.adobe.com/devnet-docs/acrobatetk/index.html

P55-CD53, how to install SATA AHCI drivers and Matrix Storage Manager?

Please excuse my noobness as this is for my first PC build and much of it is Greek to me, but could someone please inform/educate me as to what the following drivers (link) are for and which need to be installed after a fresh installation of Windows 7 Pro x64? Do I need to install all of them because some of these appear to be redundant, just from different manufacturers, or am I mistaken? I have a single 500GB HDD but will probably add more down the road.
JMicron JMB36x IDE Drivers (including floppy driver)
Description   XP/Vista/Win7 Ver: 17.49.04.WHQL
Update Date   2009-07-27
Your System OS   XP/Vista/Win7 32/64bit
(3989KB)
Intel P55 AHCI / RAID Drivers
Description   Ver: 8.9.0.1023
Update Date   2009-07-24
Your System OS   XP/Vista/Win7 32/64bit
(23048KB)
Intel P55 SATA RAID Driver (For floppy driver)
Description   Intel P55 SATA RAID driver
1. Extract the file and Copy all files to the floppy.
2. Press F6 to install driver through the floppy when booting and loading RAID function.
Update Date   2009-07-24
Your System OS   XP/Vista/Win7 32/64bit
(443KB)
JMicron IDE/SATA RAID Drivers (with AP)
Description   XP/Vista Driver Version: 1.17.43.05
For floppy install:
Please copy all the directories and files in the "floppy" folder to the root directory of a floppy disk to create a pre-install disk for Win2K/WinXP/Win2003/WinXP 64bits/Win2003 64bits.
For example,
A:\amd64
\x32
txtsetup.oem
To enhance IDE transfer speed, we strongly recommend you install JMicron IDE/SATA Driver.
Update Date   2009-02-23
Your System OS   Windows Vista 32/64bit
(4032KB)
Windows XP 32bit
(4032KB)
Intel TPM Device Driver
Description   Intel Trusted Platform chipset driver
XP/Vista/Win7: 2.00.0000.00
Update Date   2007-11-02
Your System OS   Vista/Win7 32/64bit
(23KB)
Windows XP 32bit
(23KB)
On a side note, I have already flashed the BIOS to 1.4 using the Forum USB Flashing Tool (thanks!).

Thanks.
After booting from the Windows 7 disc, I selected Repair Windows, Load Drivers. Which specific controllers do I need to install for the P55-CD53 MB since there are multiple controllers listed for each of the four SATA compressed files?
Considering the multiple files and multiple controllers, is there no one out there with a P55-CD53 that has AHCI mode enabled that can give dumbed down instructions on how to do so?
The manual states "Select the appropriate RAID controller and press enter." Well... which one is the appropriate controller? Am I suppose to load the driver for all the AHCI controllers if that's even possible?
For the Intel P55 AHCI / RAID Drivers compressed file, these are the controllers available within F6flpy64\iaAHCI.inf:
Intel(R) ESB2 SATA AHCI Controller
Intel(R) ICH 10D/DO SATA AHCI Controller
Intel(R) ICH10R SATA AHCI Controller
Intel(R) ICH7M/MDH SATA AHCI Controller
Intel(R) ICH7R/DH SATA AHCI Controller
Intel(R) ICH8M-E/M SATA AHCI Controller
Intel(R) ICH8R/DH/DO SATA AHCI Controller
Intel(R) ICH9M-E/M SATA AHCI Controller
Intel(R) ICH9R/DO/DH SATA AHCI Controller
Intel(R) PCH SATA AHCI Controller
Intel(R) PCHM SATA AHCI Controller 4 Port
Intel(R) PCHM SATA AHCI Controller 6 Port
Also, regarding the dual BIOS controls for SATA/IDE/RAID settings previously mentioned, I believe SATA ports 1-6 are controlled via Intel and 7,8 are controlled via Jmicron. Considering my HDD is currently plugged into SATA 1, Jmicron probably isn't necessary for the moment.
Edit:
Turns out that none of the drivers for the controllers listed in iaAHCI.inf could be installed. However, I went ahead and installed the drivers listed for all the controllers in iaStor.inf. I reinstalled Windows 7 to get rid of the BSOD. I then installed the chipset drivers and Intel Matrix Storage Manager.

Satellite A210-133: How to install Intel or via usb controller on windows 7

Hello!
I have a toshiba satellite a210-133 which i have upgrade it to windows 7 32 bit version.
Everything have been installed fine, but i have an intraoral machine which is connected with usb and it does not work properly.
I have questioned the manifacture of the machine and they told me that it wants Intel or VIA USB controller to work properly.
so i look at my computer\manage and i saw that
i have not have this controller.
Can you help me about it??

Hi mate
To be honest Im not quite sure what USB controller you mean exactly.
The notebook supports common USB 2.0 ports.
The Win 7 provides own Microsoft USB drivers which controls this USB 2.0 ports.
If the USB ports dont work correctly, then you should check if you need to install the chipset driver.
Usually such chipset driver can be found on chipset manufacturer page.
As far as I know the notebook uses the AMD M690V chipset (code name RS690MC + SB600)
So check this.
Furthermore many 3rd party USB devices needs an own driver.
I dont know if you intraoral machine needs such drivers but I think that the manufacturer of this machine should know this. So if you need such driver, please get in contact with the intraoral machine manufacturer to get such software.

How to install Windows 7 via Boot Camp on late 2012 iMac

These notes reflect the installation of Windows 7 Ultimate 64-bit on my late 2012 27” iMac with a 3 TB fusion drive and running OS X Mountain Lion version 10.8.4.
After launching Boot Camp Assistant, click “Print Installation & Setup Guide” and keep this handy throughout the process. There are specific details in the Boot Camp Guide that are not covered by my notes.
Don’t do like I did and expect to start at 11:00 PM on a work night and have Windows 7 working before 1:00 AM - it can take much longer. Many of the activities are best monitored instead of going to bed hoping that next morning will greet you with success.
Download Windows 7 ISO file from Internet and burn to a blank DVD
Insert a blank DVD
Start Disk Utility.
From the File menu, choose “Open Disk Image” and select the ISO to be burned.
In the list of volumes, you will now see an item representing the ISO file. Select it.
Click the Burn button and follow the instructions.
Be patient. In my case the ISO burn seemed to be stuck at 80%. I walked away for a bit and returned to find the DVD successfully burned. This is an exception to not walking away during the Boot Camp process.
Although you should be able to burn the ISO to DVD with any external burner, in my case I found that an Apple USB SuperDrive worked during the Windows installation whereas an otherwise reliable third party CD/DVD/Blueray burner was not recognized by Boot Camp 5.0.3.
If you simply burn the ISO file to the DVD, the DVD will not work. A simple check is to view the DVD’s contents after it has been burnt. If it contains a .iso file only, then you can place that DVD in the trash and start over.
Take some to think through how much space you want to dedicate to Windows 7 that will be taken from your OS X allotment. If you change your mind later, you will need to start the process over, including reinstalling and reactivating Windows 7 and any other specialized software you’ve installed. In my case, I partitioned 251 GB to Windows 7 and that left 233.7 GB free during installation.
When you are ready to begin partitioning your hard drive, unplug all unnecessary USB drives. This includes external drives and your Time Machine drive. Use a USB keyboard with a USB mouse plugged into a USB port on the keyboard. Plug the USB flash drive containing Support Software you created with Boot Camp into a regular USB port. On the iMac, I used the port nearest the right side of the monitor while facing the screen. You also need the USB SuperDrive plugged in with the Windows 7 install disk in the drive. Boot Camp jumps from partitioning straight into installation.
Although the Boot Camp Guide indicates your Mac will default launch in Windows during installation, mine rebooted into OS X each time. When the screen goes white, just hold the OPTION button and select the Windows drive (not the Windows DVD). Be patient. It may look like the Mac is refusing to accept your selection of Windows, but it could be just a little slow to launch.
If you end up installing Windows 7 more than once due to crashes, confusion or whatever, check for a Windows.old file after you’re finished. If it exists, you can delete that file. It’s a place Windows 7 places files from previous installs in case you need to save something.
As of this writing, I need to use a USB keyboard to use OPTION to have the option to launch Windows 7. Once in Windows, my Logitech K760 bluetooth keyboard works fine. It takes too long for bluetooth to sync for the keyboard to keep up with the Mac booting up. Although Windows 7 recognizes my second monitor and the drivers are up to date, the second monitor has a black screen and windows cannot be moved onto the second monitor.
I hope that Apple continues to develop Boot Camp and improve the Installation Guide for future users. When Apple advertises a feature, such as Boot Camp, there is an expectation amongst consumers that it will simply work. When a key feature fails to live up to expectations, it reflects poorly on Apple.
Thank you,
Steven Cagle
<Link Edited By Host>

Have you tried a USB installer?
Boot Camp Assistant will now ask if you want to install the Windows installer with the Boot Camp Dirvers onto a USB drive on some supported and not so support machines.
Do a search for "Windows USB installer" on Yahoo/Google and there should be quite a few.

2011 MBP 15", how to install Windows 8 via USB?

I successfully got my Windows 8 installation files on a USB. I just upgraded to Mountain Lion and no longer have the option to install Windows from another source. How can I install Windows 8 off my USB? BootCamp Assistant only offers the CD option.
Best regards.

On computers which Apple shipped with an Optical drive, then the Boot Camp utility expects you to use that optical drive to install your Windows OS. Since the 2011 MBP shipped with an optical drive, the Boot Camp utility expects you to boot the Windows installer from that drive.

How to install wired printer via rj45 on Extender RE2000 connected to router EA6700

Hi,
I´ve installed a new network at home but I´ve problem when trying to connect my printer to my RE2000.
Someone who know how to do?
// Kent

If you have not setup the extender yet, you typically connect it a computer first and configure.
FAQ for RE2000
3. How can I set up the RE2000 to connect to my router or access point?
There are three (3) ways to set up the RE2000:
i. By running the Setup CD that comes with the device. For instructions, click here.
NOTE: If you do not have the Setup CD, you can download the setup software from the Linksys Support Site.
ii. By using the Wi-Fi Protected Setup™ (WPS) button on the range extender if your router also supports this feature. To learn how to connect devices using this feature, click here.
iii. By configuring the device through the web-based setup page. To learn how, click here.
You will most likely want to assign the printer/extender a DHCP lease/reservation. Will make printing to it later faster and more consident for mutliepl different OS (Win/OSX/Linux/BSD/iOS/...). Otherwise the computer printing will have to query the network to find it. You can get by without it, just little easier.

How to install Developer Tools via command line

Hello,
is there a way, to install the Developer Tool via Command line?
I need only the unix tools.
I have to install the unix tools over a ssh connection.
Thanks in advance and best regards
Martin

I followed the link you gave. The only download I saw was for Xcode 4, and they either wanted $5 to purchase it from the app store or a 1 year mac developer license thing which was $100.
<Edited by Host>

How to install device type via AIX client

Hello,
I would like to install a printer device type PRI file to the SAP system via an AIX client. Would appreciate some detailed steps and assistance.
Using: SAP R/3, OS AIX ver 5.3. TL 7
Thank you.

> Hi, Thank you for the information, but I am not able to download the SAP Note 6427.
> Reason: I do not have the username and password.
- start transaction SE38
- execute the program RSTXSCRP
- press on the button with the "i" to get the documentation
Markus

HT3986 HOW TO INSTALL WIN 7 VIA BOOT CAMP ON MAC BOOK PRO 15".

hi everyone , I m new to this forum. I wish to know the process of installing the Win 7 on macbook pro if my superdrive is not working.
Kindly help...i need to install it urgently...I cant use the applications in parallel environment.

Have you tried a USB installer?
Boot Camp Assistant will now ask if you want to install the Windows installer with the Boot Camp Dirvers onto a USB drive on some supported and not so support machines.
Do a search for "Windows USB installer" on Yahoo/Google and there should be quite a few.

How to install Corporate applications via Profile manager

What is the correct procedure to install/push iOS applications created in our corporate apple development environment? I've read in one place that they have to be exported from the dev environment based on a specific path for the server, and then that you can't use the Lion server Profile Manager but need a 3rd party application. Any guidance is appreciated!

You just posted to the Lion (Client) forum. I've asked a moderator move your post. No action is needed on your part until it is moved. I'm not familiar with Lion Server.

How to install ios5 beta dmg on iphone 4?

Hello
i have paid for the developer account, and i got my permission to download the ios 5 beta and also itunes 10.5. So i did that and i downloaded itunes and installed it. no problems. I downloaded also tje ios5 for my iphone 4. But here the problems begin, i have a dmg file with ios 5 and not a ipsw file.
So what can i do .....
Thx a lot for your help

For god boys!!!!
His question is so simple!!!!
It's not about iOS 5!!!!
It's about how to install beta OS via iTunes...
Look fkaulmann,
1. Double click on .dmg file. Copy the .ipsw to your file system.
2. Open iTunes, connect your device, hold option key (alt) and click on "restore", a window will comes up, select the .ipsw file.
3. Follow the instructions of the iOS you are attempting to install.
Just it.
But, as the Michael said... for more details about Apple beta releases, go to the Dev Forum.

How to install Linux installation on SATA hdd with MSI VIA KM4M-V

I'm having AMD 2600+
MSI motherboard with VIA KM4M chipset
80GB SATA harddisk (1 unit) with 256 MB RAM
When I tried installing Linux, setup proceeds until the HDD partitioning screen and I get the msg " NO HDD found" or something similar messg.
My question is 1 - does the above config supports Linux installation, if yes then how to do it and if no, then whats the solution.
Has anyone faced similar situation...pl reply ASAP. I'd be obliged....
best rgds,
Mounesh.

Hello!
I'm no good at Linux, there muste be better people coming along later, just two questions:
Doubt VIA (http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=610&kind=1 ), have support for Linux? Check http://www.viaarena.com!
Everything is alright in BIOS, SATA enabled and so on?
You might also check the manufacturer of the hard disk for software and advice.

How to install SATA on VIA K8M890 chipset board

Similar Messages

Maybe you are looking for