How to install sccm client on bulk collections using push installation

Unfortunately I did something and received the following description:-
How to know/reproduce the following scenario by installing sccm client on bulk collections in SCCM 2012R2?
"User ***** requested that the CCRs will be generated for collection “All Windows Client Systems (P0100015), The SMS Provider did not generate CCRs for all the system resources in this collection.
Possible cause: some system resources are not assigned to the current site, and you chose to insta
Il clients only on system resources that are
assigned to current site.
Another possible cause: Some system resources do not have Microsoft Windows NT operating system
or above installed.
Message ID: 30110"

Ok. Some of your clients are not covered under any site assignment boundary, hence you are getting that error. Would recommend you to select "Install the client from a specified site" and select the Primary site. If your boundary groups for content
are configured fine then the client will be installed from the appropriate site for each machine you are pushing the client to.
-RG

Similar Messages

How to install SCCM client in native mode on kiosks machine

Please share the whole process of sccm client installation and server configuration for kiosks machine

https://www.dropbox.com/s/xcf57h95j1b90am/SC2012_ConfigMgr_DocDownload.docx
Hope this link help you
DushYant'

How to install oracle client on pentium 4

please can someone tell me how to install oracle client 8i on pentium 4 system. the installation is not going automaticlly , and if i explore the cd and press on the setup file the installing didnt start.

8i definitely has problems with Pentium IV processors. The fix is to copy the entire CD to the hard drive and then rename each copy of symcjit.dll to symcjit.old.

Need help with a simple Rename/Join Domain/Install SCCM Client Task Sequence

Good morning everyone,
I need to create a very simple task sequence that will run an .exe that we have created that renames the computer based on a prefix-serialnumber...then restarts, adds it to our domain, restarts, and then installs the SCCM client.
1) run rename program
2) join to domain
3) install sccm client
Can someone help me with the steps that will be required for this?
Thank you very much!
**note, these will not be formatted/have an OS installation ran on it with this task sequence. The situation is that we are receiving 400+ custom configured laptops, and we're going to have to rename/join/install sccm on each...trying to simplify
this
any recommendations are greatly appreciated!

Narcoticoo : Which boot image am i supposed to be using to insure that it boots into Standard Windows, NOT WinPE? I have a standard x86 package / boot image i've been using. If it boots up with this, it goes into WinPE (correct me if I'm wrong,
for this seems to be what happens each time it boots off the boot image...it does not go into windows standard/full)
When I go into properties of the one i'm using, and take the check off of "Use a boot image", where it will not boot to WinPE, it will not even show up in my list of available task sequences for
1) when I PXE boot to try the task sequence, or
2) when I try to make stand-alone media for this task sequence as you have suggested
When I run the standalone media, the only log files I find are the following with errors:
PackageID = 'MPS0014E' InstallSoftware
12/8/2014 12:28:36 PM 2344 (0x0928)
BaseVar = '', ContinueOnError='' InstallSoftware
12/8/2014 12:28:36 PM 2344 (0x0928)
ProgramName = 'MPHS - Rename Computer' InstallSoftware
12/8/2014 12:28:36 PM 2344 (0x0928)
SwdAction = '0002' InstallSoftware
12/8/2014 12:28:36 PM 2344 (0x0928)
IsSMSV4PlusClient() == true, HRESULT=80004005 (e:\nts_sccm_release\sms\client\osdeployment\installsoftware\main.cpp,332)
InstallSoftware 12/8/2014 12:28:36 PM
2344 (0x0928)
Configuration Manager client is not installed
InstallSoftware 12/8/2014 12:28:36 PM
2344 (0x0928)
Process completed with exit code 2147500037
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Failed to run the action: Install Package.
Unspecified error (Error: 80004005; Source: Windows)
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Failed to run the action: Install Package. Execution has been aborted
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Do not send status message in full media case
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Failed to run the last action: Install Package. Execution of task sequence failed.
Unspecified error (Error: 80004005; Source: Windows)
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Do not send status message in full media case
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Execution::enExecutionFail != m_eExecutionResult, HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmanager\tsmanager.cpp,866)
TSManager 12/8/2014 12:43:48 PM
1544 (0x0608)
Task Sequence Engine failed! Code: enExecutionFail
TSManager 12/8/2014 12:43:48 PM
1544 (0x0608)
TSManager 12/8/2014 12:43:48 PM
1544 (0x0608)
Task sequence execution failed with error code 80004005
TSManager 12/8/2014 12:43:48 PM
1544 (0x0608)

Unable to install sccm client from SCCM console install client option

Hi
Unable to install client on windows 7 64 bit enterprise from sccm console. The client is discovered in sccm console with status client = NO, so we want to install sccm client from console remotely.
We cannot enable push install. my id has full access on SCCM site server SCCM product also admin rights on workstations. I am able to access net bios path SMS_<site code> of site server then client path from client machine. machine is in domain and
is boundry of sccm .
Client push install in console is diabled
Regards Sushain KApoor

Hi!
Examine the ccm.log located in <SCCM 2007 InstallationPath>\LOGS on the site server.
Best regards
Henrik

How To: Install a Client Agent link broken

I wanted to know if there was a new version of the agent and found the link broken
[Quote]
When you select an agent from the table of sync groups and sync agents on the SQL Data Sync landing page, you go to the sync agent page.
SQL Data Sync Client Agent
When you select a client agent from the SQL Data Sync landing page, three buttons appear at the bottom of the page.
REFRESH
MANAGE KEY
Create a new agent key. After you create an agent key, launch the agent and submit the new key value.
DELETE
Delete the selected client agent.
For more information on Client Agents, see the topics
How To: Install a Client Agent,
How To: Register a SQL Server database with a Client Agent, and
How To: Change an Agent's Key on MSDN.
[/Quote]
I keep getting redirected to http://www.microsoft.com/fr-fr/default.aspx

Hi,
Thank you for the feedback. I will have the relevant team notified.
You can have a check on the below link for SQL Data Sync (Preview) Client Agent.
http://msdn.microsoft.com/en-us/library/azure/jj823137.aspx
Regards,
Mekh.

I can't install sccm client

hi,my client os is win server 2012 r2,
i want to install sccm client on it ,but i failed. why?
i want to know if the client can be installed on this version os.
thks

hi,my client os is win server 2012 r2,
i want to install sccm client on it ,but i failed. why?
ccmsetup log as follows:
<![LOG[Retrieved client version '5.00.7958.1000' and minimum assignable site version '5.00.7845.1000' from client package]LOG]!><time="14:11:32.774-480" date="02-19-2014" component="ccmsetup" context=""
type="0" thread="8088" file="siteinfo.cpp:678">
<![LOG[Checking compatibility of site version '5.00.7804.1000', expect newer than '5.00.7845.1000']LOG]!><time="14:11:32.774-480" date="02-19-2014" component="ccmsetup" context="" type="1" thread="8088"
file="siteinfo.cpp:703">
<![LOG[Client version '5.00.7958.1000' is not compatible with the site '001' version '5.00.7804.1000'.]LOG]!><time="14:11:32.774-480" date="02-19-2014" component="ccmsetup" context="" type="2" thread="8088"
file="siteinfo.cpp:721">
<![LOG[Client version '5.00.7958.1000' is not compatible with the site '001' version '5.00.7804.1000'. Fail the installation.]LOG]!><time="14:11:32.774-480" date="02-19-2014" component="ccmsetup" context="" type="3"
thread="8088" file="ccmsetup.cpp:1462">
<![LOG[A Fallback Status Point has not been specified. Message with STATEID='324' will not be sent.]LOG]!><time="14:11:32.774-480" date="02-19-2014" component="ccmsetup" context="" type="1" thread="6012"
file="ccmsetup.cpp:9763">
<![LOG[CcmSetup failed with error code 0x87d0029d]LOG]!><time="14:11:32.774-480" date="02-19-2014" component="ccmsetup" context="" type="1" thread="6012" file="ccmsetup.cpp:10879">

OSD Task Sequence fails to install SCCM client

Hello,
Our OSD task sequence fails to install the SCCM client with certain images.
The TS gets to the "Setup Windows and Configuration" step, during which it downloads all the necessary SCCM client files (silverlight, C++ redistributable, client.msi....etc.). At this point computer restarts and in never loads back into the
task sequence, instead it enters the minisetup (setup is starting services, setup is installing devices, setup is applying system settings...preparing computer for first use), after which the computer restarts and you are back at the CTR+ALT+Del screen.
The computer has joined the domain and has run all other steps but it has failed to install SCCM client. I can also see the leftovers of an incomplete TS under c:\_SMSTaskSequence
If we change the image specified under "Apply Operating System" step, everything works ok.
It appears there is something wrong with this particular image. Any ideas?
Logs show no errors. Let me know which logs you'd like me to post (and from which location)
There is no ccm folder under c:\windows

Hoping you are using ConfigMgr 2012 R2. If a client machine Join to Domain and doesn't proceed with other steps and not installing the CCM client, then problem seems to be with the Image.Do you have any RunOnce registry setting specified in the Image? You
can mount the Image and check those settings.
RunOnce Key Reference :
https://msdn.microsoft.com/en-us/library/windows/desktop/aa376977(v=vs.85).aspx
If the above key is present in the Image, TS Engine won't resume after the reboot.
You need to use a new variable "SMSTSPostAction" at the end of the Task Sequence, to add your custom actions.
The above variable is applicable in CM 2012 SP1 and R2.
Thanks, Senthil. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. Click on "vote as Helpful" if you feel this post helpful to you. This
can be beneficial to other community members reading the thread.

How to Install the Cubes(SD & MM) by using the Business Content

Hi All,
Can anybody tell me how to install the Cubes(SD & MM) by using the Business Content,
And also require any Material & Navigation steps for to do this...
Reply back me to [email protected]
Regards,
Kiran

I know this is very old but I’m trying to clean up old posts. Did you ever solve this? If so it would be good if you could post the solution to assist others. If not, at this
stage, as nobody has answered, I would recommend that you call Intune support.
You will find your local Intune support number here
http://technet.microsoft.com/en-US/jj839713.aspx
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

How to install ios6 apps on ios5, iam using ipad1

how to install ios6 apps on ios5, iam using ipad1

You don't. You need to get iOS 5 compatible Apps. You can however try to get older compatible versions of apps that currently require iOS6.
Download the App you want to a computer running iTunes or an Apple device that can support the new version using the Apple ID from your iPad.
Then go to the Purchased tab in the App Store App and look for the App there. You'll get a prompt that the App is not compatible, but it should offer to download a compatible version.
App Store: Install the latest compatible version of an app
http://support.apple.com/kb/ht5919

Install SCCM Client Post Install via MDT 2013

I want to know best practice on how to install the SCCM client via MDT 2013 as a post install task sequence? Im deploying a lot of machines via MDT offline USB....
Is it grabbing the ccmsetup folder and using the following command line?
ccmsetup.exe /noservice /MP:<insert> SMSSITECODE=<insert> smscachesize=10000

There's no such thing as a "best practice" for most real-world tasks; real-world is different for everyone which means you need to know the details and choose the right things for your environment.
You need to run the command-line that is appropriate for your environment just like you would for any manual install.
Without knowing any details about your environment, I would add the SMSMP and FSP properties to the above command-line. If this is truly an offline install, you shouldn't use /mp though, you should use /source and point it at the client directory.
Jason | http://blog.configmgrftw.com | @jasonsandys

How to install Oracle client Version 10.2.0.4 on a Windows server 2008

Hi,
I need to install an Oracle client on a Windows Server 2008 (32-bit), how do I do that?
I want to install Oracle client version 10.2.0.4 (Instant Client Package - Basic: All files required to run OCI, OCCI, and JDBC-OCI applications).
Pls. advice, I can't find instructions for this installation on Oracle.com or anywhere else.

thx, it looks promising...
but how to run the .jar files and which one to run, both Class12.jar and ojdbc14.jar, to start the installation?
Do I need to install the java runtime environment to run the .jar files?

How to call BULK COLLECT using JDBC in JSP?

Hi
I am using BULK COLLECT instead of CURSOR in my Stored Procedure.
How to use these stuff in JDBC.
If i am using CURSOR means
cs.registerOutParameter(1,oracle.jdbc.driver.OracleTypes.CURSOR);
is used.
Which types i have to use?
I am retriving morethan one record using FOR. LOOP in SP and before that
BULK COLLECT is used in SELECT query..
Can you give jsp code for this?
Thanks

you may find related sample jdbc code on otn - http://www.oracle.com/technology/sample_code/tech/java/sqlj_jdbc/index.html
Best regards.

How to handle multiple save exceptions (Bulk Collect)

Hi
How to handle Multiple Save exceptions? Is it possible to rollback to first deletion(of child table) took place in the procedure.
There are 3 tables
txn_header_interface(Grand Parent)
orders(parent)
order_items (Child)
One transaction can have one or multiple orders in it.
and one orders can have one or multiple order_items in it.
We need to delete the data from child table first then its parent and then from the grand parent table.if some error occurs anywhere I need to rollback to child record deletion. Since there is flag in child table which tells us when to delete data from database.
Is it possible to give name to Save exceptions?
e.g.
FORALL i IN ABC.FIRST..ABC.LAST SAVE EXCEPTIONS A
FORALL i IN abc.FIRST..ABC.LAST SAVE EXCEPTIONS B
if some error occurs then
ROLLBACK A; OR ROLLBACK B;
Please find the procedure attached
How to handle the errors with Save exception and rollback upto child table deletion.
CREATE OR REPLACE
PROCEDURE DELETE_CONFIRMED_DATA IS
TYPE TXN_HDR_INFC_ID IS TABLE OF TXN_HEADER_INTERFACE.ID%TYPE;
TXN_HDR_INFC_ID_ARRAY TXN_HDR_INFC_ID;
ERROR_COUNT NUMBER;
BULK_ERRORS EXCEPTION;
PRAGMA exception_init(bulk_errors, -24381);
BEGIN
SELECT THI.ID BULK COLLECT
INTO TXN_HDR_INFC_ID_ARRAY
FROM TXN_HEADER_INTERFACE THI,ORDERS OS,ORDER_ITEMS OI
WHERE THI.ID = OS.TXN_HDR_INFC_ID
AND OS.ID = OI.ORDERS_ID
AND OI.POSTING_ITEM_ID = VPI.ID
OI.DW_STATUS_FLAG =4 --data is moved to Datawarehouse
MINUS
(SELECT THI.ID FROM TXN_HEADER_INTERFACE THI,ORDERS OS,ORDER_ITEMS OI
WHERE THI.ID = OS.TXN_HDR_INFC_ID
AND OS.ID = OI.ORDERS_ID
OI.DW_STATUS_FLAG !=4);
IF SQL%NOTFOUND
THEN
EXIT;
END IF;
FORALL i IN TXN_HDR_INFC_ID_ARRAY.FIRST..TXN_HDR_INFC_ID_ARRAY.LAST SAVE
EXCEPTIONS
DELETE FROM ORDER_ITEMS OI
WHERE OI.ID IN (SELECT OI.ID FROM ORDER_ITEMS OI,ORDERS
OS,TXN_HEADER_INTERFACE THI
WHERE OS.ID = OI.ORDERS_ID
AND OS.TXN_HDR_INFC_ID = THI.ID
AND THI.ID = TXN_HDR_INFC_ID_ARRAY(i));
FORALL i IN TXN_HDR_INFC_ID_ARRAY.FIRST..TXN_HDR_INFC_ID_ARRAY.LAST SAVE
EXCEPTIONS
DELETE FROM ORDERS OS
WHERE OS.ID IN (SELECT OS.ID FROM ORDERS OS,TXN_HEADER_INTERFACE THI
WHERE OS.TXN_HDR_INFC_ID = THI.ID
AND THI.ID = TXN_HDR_INFC_ID_ARRAY(i));
FORALL i IN TXN_HDR_INFC_ID_ARRAY.FIRST..TXN_HDR_INFC_ID_ARRAY.LAST SAVE
EXCEPTIONS
DELETE FROM TXN_HEADER_INTERFACE THI
WHERE THI.ID = TXN_HDR_INFC_ID_ARRAY(i);
COMMIT;
DBMS_OUTPUT.PUT_LINE(TO_CHAR(SYSDATE, 'DD-MON-YY HH:MIPM')||':
DELETE_CONFIRMED_DATA: INFO:DELETION SUCCESSFUL');
EXCEPTION
WHEN OTHERS THEN
ERROR_COUNT := SQL%BULK_EXCEPTIONS.COUNT;
DBMS_OUTPUT.PUT_LINE(TO_CHAR(SYSDATE, 'DD-MON-YY HH:MIPM')||':
DELETE_CONFIRMED_DATA: ERROR:Number of errors is ' ||ERROR_COUNT);
FOR indx IN 1..ERROR_COUNT LOOP
DBMS_OUTPUT.PUT_LINE('Error ' || indx || 'occurred during
'||'iteration'||SQL%BULK_EXCEPTIONS(indx).ERROR_INDEX);
DBMS_OUTPUT.PUT_LINE('Error is '
||SQLERRM(-SQL%BULK_EXCEPTIONS(indx).ERROR_CODE));
END LOOP;
END DELETE_CONFIRMED_DATA;
Any suggestion would be of great help.
Thanks in advance
Anu

If you have one or two places in your code that need multiple exceptions, just do it with multiple catch statements. Unless you are trying to write the most compact Programming 101 homework program, inventing tricks to remove two lines of code is not good use of your time.
If you have multiple catches all over your code it could be a code smell. You may have too much stuff happening inside one try statement. It becomes hard to know what method call throws one of those exceptions, and you end up handling an exception from some else piece of code than what you intended. E.g. you mention NumberFormatException -- only process one user input inside that try/catch so it is easy to see what error message is given if that particular input is gunk. The next step of processing goes inside its own try/catch.
In my case, the ArrayIndexOutOfBoundsException and
NumberFormatException should be handled by the same way.Why?
I don't think I have ever seen an ArrayIndexOutOfBoundsException that didn't indicate a bug in the code. Instead of an AIOOBE perhaps there should be an if statement somewhere that prevents it, or the algorithm logic should prevent it automatically.

How to install Oracle Client 9i 32 bit at windows 7 Pro 64 bit ?

My company hava many computer are running windows xp 32 bit , and now we buy a lot of HP computer are running windows 7 Pro 64 bit . We have Oracle Client 9i 32bit for our database link ,but we have no extra bugde to buy new Oracle license for our database network , so how can I install Oracle Client 9i 32bit at windows 7 Pro 64 Bit ?

efe603fc-4926-43ae-8c83-1b5a92c66110 wrote:
My company hava many computer are running windows xp 32 bit , and now we buy a lot of HP computer are running windows 7 Pro 64 bit . We have Oracle Client 9i 32bit for our database link ,but we have no extra bugde to buy new Oracle license for our database network , so how can I install Oracle Client 9i 32bit at windows 7 Pro 64 Bit ?
Ummm .... client license?
All license questions should be addressed to Oracle. I believe what you'll find is that the license for client installation is free. What you pay to license and support is the rdbms (server) software.
But all licensing questions should be addressed directly to Oracle. A license agreement is a legal issue, and this forum will have no standing in court.

How to install sccm client on bulk collections using push installation

Similar Messages

Maybe you are looking for