How to install SDK com into Delphi 7

Hello All,
I am a freshman about SBO, now I try to install the SDK com into my Delphi7, how to do? who can provide a sample? thanks for your help in advance.

Hi Alex,
You shouldn't install the components, you should just click the "Create Unit" button and not the "Install" button on the Import Type Library window.
You don't use the components as visual components, you just refer to the unit (add the newly created unit in your Uses clause in the unit).
Please also close the question if it is solved.
Hope it helps,
Adele

Similar Messages

  • How to Install SSIS COM Component on Client side

    Hi,
    I am new to BPC.
    I can't install SSIS COM Component on Client side.
    and i guess,  it lead BPC Excel , Data Manager is not working.
    Because all the user are local user on server side, no domain
    I have run OSoftSetup.exe,  but the result is
    Error (Login failed for user ". The user is not associated with a trusted SQL Server connection.)
    i have tried to change the OutlookSoft.config in OSoftSSIS_Client\Bin Folder
    and the config doesn't take any effect.
    How to How to Install SSIS COM Component on Client side?
    thx
    It is client side PC_MS\Logging\Log
    #ERROR#CustomXMLClt##EPM-BPC-MS##e17c2022-c7d4-4a0b-8515-b719441e3dbf###XMLParser : GetTagValue#hostname
    user########Plain##[LOG ID:22]System.NullReferenceException: Object reference not set to an instance of an object.
       at OSoft.Consumers.Common.CustomXML50.XMLParser.GetAttributeValue(String strKeyValue, String strAttKeyValue, String strSubKeyValue)#
    thx
    John

    But the problem is...in client side
    When opening Office 2007 Excel -> eTool -> Data Manager
    There have no option showed.
    and in C:\Documents and Settings\<user>\My Documents\PC_MS\Logging\Log
    it has following error.
    2010 08 21 17:15:35:875#+8:00#ERROR#CustomXMLClt##EPM-BPC-MS##51cea66a-13cd-49fc-afdd-7b492566bd12###XMLParser : GetTagValue#<HOSTNAME>
    BPCADM########Plain##[LOG ID:346]System.NullReferenceException: Object reference not set to an instance of an object.
       at OSoft.Consumers.Common.CustomXML50.XMLParser.GetAttributeValue(String strKeyValue, String strAttKeyValue, String strSubKeyValue)#
    2010 08 21 17:15:35:875#+8:00#ERROR#DMClientTools##EPM-BPC-MS##7aec1fbe-5fda-4c91-9c4a-1eec5e59911b###DMTools::ErrCheck#<HOSTNAME>
    BPCADM########Plain##[LOG ID:347]System.Exception: 91: Object reference not set to an instance of an object.
       at OSoft.Consumers.DataMgr.DMClientTools50.DMTools.ErrCheck(String strRtn)#
    2010 08 21 17:15:35:875#+8:00#ERROR#DMClientTools##EPM-BPC-MS##48f5a612-a046-4ef9-a56c-db565ef489d2###DMTools::GetServerInfo#<HOSTNAME>
    BPCADM########Plain##[LOG ID:348]System.Exception: 91: Object reference not set to an instance of an object.
       at OSoft.Consumers.DataMgr.DMClientTools50.DMTools.ErrCheck(String strRtn)
       at OSoft.Consumers.DataMgr.DMClientTools50.DMTools.GetServerInfo(String strContext, String strFilter, String strSecurity)#
    2010 08 21 17:15:35:890#+8:00#ERROR#DMConsole##EPM-BPC-MS##af7f7343-1cb2-4802-a667-2adbb1b8e2fd###basClientTools::ChangeClientSiteList#<HOSTNAME>
    BPCADM########Plain##[LOG ID:349]Subscript out of range#

  • I just purchased Wittenberger Fraktur how do install this font into my photoshop cs6 for mac ?

    I just purchased Wittenberger Fraktur how do install this font into my photoshop cs6 for mac ?

    You just install it in the OS.
    Photoshop gets the fonts from the OS.

  • How to install CS5.5 into Macpro OS 10.8 Mountain Lion? anyone please help

    How to install CS5.5 into Macpro OS 10.8 Mountain Lion? anyone please help

    How to install CS5.5 into Macpro OS 10.8 Mountain Lion? anyone please help

  • How to install hard drive into mac pro

    how to install hard drive into mac pro

    I recently bought a new 2TB internal sata drive for my Macpro.
    The installation was easy, but I'm not sure what to do next.
    For one, should I partition the drive?
    My purpose for buying the drive was to use it as my go to drive for Parallels. I used to run my music studio on Windows based machines, and my older project files require a windows OS to recover. I installed Parallels so I can have my studio running Mac and Windows programs which will enable me to access my old project files and take them into my newer Protools system.
    So now, I've installed my new hard drive, but I'm not sure if I should partition it....And!? I'm not sure how to designate that drive for my virtual pc on Parallels. I was able to allocate enough disk space to parallels in order to load my music software, but at this point, I'm not sure if I've just promised it disk space from my original partitioned drive (which only has about 350 GB left on it).
    I would love to be able to make one internal drive available for Parallels, and the other available for the rest of my OSX. When I use Parallels, I still would like to save some extra information on the 2TB drive as well from my dekstop running OSX.
    I hope this makes sense! Your help is much appreciated!

  • How to install Oxford dictionary into N5800??

    I heard that there was anyone installed Oxford dictionary into N5800, how to do it? Please share to me! thanks

    Hi,
    This is trial version only. But, I hope it could help you.
    http://gallery.mobile9.com/f/700209/
    http://gallery.mobile9.com/f/676993/
    Btw, this is for 6233

  • How to install Oracle 10g into Linux

    Hi All,
    I am a dummy user, this is my first time trying to install the Oracle. I need to install Oracle 10g into my company server, but I ran into issues. I am not sure which package I should download in order to install in my Linux server. Appreciate your advice.
    I ran into this error
    [root@localhost database]# ./runInstaller
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
    Failed <<<<
    Exiting Oracle Universal Installer, log for this session can be found at /tmp/OraInstall2009-03-22_06-23-34PM/installActions2009-03-22_06-23-34PM.log
    I tried to download
    1) 10201_database_linux_x86_64.cpio
    2) 10201_database_linux32.zip
    I am running on Linux localhost 2.6.18-8.el5 #1 SMP Fri Jan 26 14:15:14 EST 2007 x86_64 x86_64 x86_64 GNU/Linux
    Linux version 2.6.18-8.el5 ([email protected]) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-52)) #1 SMP Fri Jan 26 14:15:14 EST 2007
    Red Hat Enterprise Linux Server release 5 (Tikanga)

    Thanks Laura, tried the first one and it works. But I guess I am stuck again with the following error. Do I need to access to the server directly? Currently I am just connecting to the server via the VPN connection.
    [oracle@localhost database]$ ./runInstaller -ignoreSysPrereqs
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
    Failed <<<<
    Ignoring required pre-requisite failures. Continuing...Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-03-22_07-11-16PM. Please wait ...
    DISPLAY not set. Please set the DISPLAY and try again.
    Depending on the Unix Shell, you can use one of the following commands as examples to set the DISPLAY environment variable:
    - For csh: % setenv DISPLAY 192.168.1.128:0.0
    - For sh, ksh and bash: $ DISPLAY=192.168.1.128:0.0; export DISPLAY
    Use the following command to see what shell is being used:
    echo $SHELL
    Use the following command to view the current DISPLAY environment variable setting:
    echo $DISPLAY
    - Make sure that client users are authorized to connect to the X Server.
    To enable client users to access the X Server, open an xterm, dtterm or xconsole as the user that started the session and type the following command:
    % xhost +
    To test that the DISPLAY environment variable is set correctly, run a X11 based program that comes with the native operating system such as 'xclock':
    % <full path to xclock.. see below>
    If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance.
    Typical path for xclock: /usr/X11R6/bin/xclock
    [oracle@localhost database]$ echo $SHELL
    /bin/bash

  • How to install SDK

    I am obviously very new to this development environment. I have downloaded the SDK for CS3 and I am trying to install it. The readme and other documentation points to the porting-guide to explain how to set up and start using the SDK. I am looking at the porting-guide.pdf that was included in the download. There is no explanation on how to install the SDK - only how to port CS2 projects to the new environment. What am I missing? I have also looked for a setup.exe or similar and non exists.
    Please help.
    Steve

    There really isn't anything to install, once you've unzipped the download. You just have to make sure the include files are accessible and referenced in any project you create. The easiest thing usually is just to use one of the shipped-with sample projects and make it do what you want to do -- that way all the plugin setup is mostly done for you (the annoying various little things are taken care of).

  • How to install Windows XP into a Flash Drive?

    I would like to install Windows XP into my flash drive. Not boot from the flash drive and install into my PC. I've searched extremely hard on the internet and found the other thing around and I tried what I could. Any suggestions? (Here's what I tried: Creating partition tables. Install using VMware. Using different formats.

    Thanks for the tips. I was able to install Windows XP and boot from the SATA drive by using these options and setting the appropriate boot device selections...
    Legacy Mode
    ATA Configuration - PATA only
    SATA Keep enabled - yes
    PATA Keep enabled - yes
    PATA channel selection - both
    Combined Mode Option - S-ATA 1st Channel
    S-ATA Ports Definition - P0 - 3rd./P1 - 4th.
    I just wasn't sure if I was really getting "SATA" performance, etc. without specific drivers.
    Thanks again.
    Bob (ll1951md)

  • Does anyone recall how to install Virtual Guitar into GB

    My saga continues:
    I reinstalled GB2.02 on my G5 1.8 and it is fine now. Midi files import like they should. However as usual problems persist: i am getting core error -1
    if i open up my converted VST's to AU's in the generator.
    Does anyone have VGEE or VG in GB2.02 and could you tell me how you installed them.
    my dilemma:::: I have it installed perfectly in my G5 2.5 GHZ
    yet that G5 will not allow midi importation. I have used with much glee VG VGEE and acoustic version ( VST-AU ) on the 2.5GHZ but if i go ahead and reinstall a new GB that will fix the midi problem BUT the VST's will start in with this core error -1 and i will resent it since i have songs with this great plug in and dont want to rock the boat. SO in summary for all those soap opera addicts, i have a perfectly running GB2.02 on my G5 1.8 ( freshly installed 2.02) but it wont give me the AU's. I have a GB2.02 on the 2.5GHZ G5 that wont import midi files but feeds me those AU's sans problems. Am i a complicated garagebander or what?
    I am not risking a new install on the 2.5 until someone knows exactly how to do it. I have the latest fx wrapper from fx expansion.
    anyone ... raise your hands!

    Hopefully, this should help.
    Even though it's vista specific, it should on windows 8 as well.
    Effects panel
    Install Actions in Photoshop Elements 7 on Vista
    Action player
    Install Actions in the PSE Action Player

  • How to install SDK 3.3.0 into FlexBuilder Datavisualization components do nocz install

    I own FlexBuilder 3.3 and installed the sdk 3.3. And I have a
    FlexBuilder license. But Following the instructions to install the
    datavisualization components I get an error java ist written wrong
    or could not be found. How can I install the datavisualization
    components .... My System is Vista 64 ultimate. Thx for any help as
    I need to compile a project with the new sdk but have no access to
    mx.automation and get an error 1172.

    I own FlexBuilder 3.3 and installed the sdk 3.3. And I have a
    FlexBuilder license. But Following the instructions to install the
    datavisualization components I get an error java ist written wrong
    or could not be found. How can I install the datavisualization
    components .... My System is Vista 64 ultimate. Thx for any help as
    I need to compile a project with the new sdk but have no access to
    mx.automation and get an error 1172.

  • How to install Personal Java Into Pocket PC? (IMPT)

    I download pjavawince.sh3.cap from http://java.sun.com/products/personaljava/ and download pjavawince.sh3.cap into My Pocket PC (HP jornada) SH3.
    When I double click the file in my Pocket PC it give me an error message
    "Setup Failed"
    The applciation cannot run on this device type. Please install the application specific to this device type.
    Anyone know what is the problems for this? My Pocket PC is HP Jornada 568. Anyway I do not understand what is SH3 stand for?
    Please help me if you know the problem!!!
    THANKS IN ADVANCE

    Hi,
    Jornada 568 is not using SH3 but ARM processor. If you are trying to install PJava for SH3 it will fail. Processor SH3 was used in Jornadas 54x series.
    Stan Berka
    I download pjavawince.sh3.cap from
    http://java.sun.com/products/personaljava/ and
    download pjavawince.sh3.cap into My Pocket PC (HP
    jornada) SH3.
    When I double click the file in my Pocket PC it give
    me an error message
    "Setup Failed"
    The applciation cannot run on this device type. Please
    install the application specific to this device type.
    Anyone know what is the problems for this? My Pocket
    PC is HP Jornada 568. Anyway I do not understand what
    is SH3 stand for?
    Please help me if you know the problem!!!
    THANKS IN ADVANCE

  • How to install SCA files into CE 7.1

    hi guys,
    I have found ESR 6.0 has resolved several issues which I am facing during configuration of ESR in earlier version. The quesiton is how do I installed downloaded of SCA file from service market place???
    Or any one has idea to insatall any SCA file into CE 7.1??
    Regards,
    Naeem

    Hi,
    NWDS> go to windows> perspectives>others>deployment-->and add the sca files
    Regards
    Manohar

  • How to install Elements 10 into a computer without a disc drive

    Have the software on disc, but no disc drive. Can it be loaded into another computer and file-shared? Or is there another method?

    Hi Hayley A 1320
    Download from the below link : http://prodesigntools.com/photoshop-elements-10-direct-download-links-pse-premiere-pre.htm l
    Save it on a flash drive and install it into another computer using flash drive

  • How to Install Cocoon 2 into Weblogic 6.0

    My department has worked out the following steps to install C2 into Weblogic
    6.0.
    1. Start a DOS window.
    2. Go to the top directory of the disk where BEA is mounted.
    cd \
    3. Log in to CVS:
    cvs -d :pserver:[email protected]:/home/cvspublic login
    4. Checkout Cocoon 2 from CVS:
    cvs -d :pserver:[email protected]:/home/cvspublic -z3 checkout
    xml-cocoon2
    Wait for several minutes for the source files to download.
    5. Go into resulting directory:
    cd \xml-cocoon2
    6. Build Cocoon 2 by doing 6a or 6b.
    6a. If you are running Windows, run:
    build.bat
    On my machine, this took 15 seconds; your mileage may vary.
    6b. If you are running unix, run:
    build.sh
    7. If you haven't done so already, build a domain and a server. In this
    discussion, the name of the domain is 'mydomain' and the name of the server
    is 'myserver'.
    These are the BEA default names.
    8. In Windows Explorer, drag COPY (i.e. hold the ctrl key down) the
    directory
    C:\xml-cocoon2\webapp
    to
    c:\bea\wlserver6.0sp1\config\mydomain\applications
    (if in Unix, do the Unix equivalent.)
    9. Rename the newly created folder
    c:\bea\wlserver6.0sp1\config\mydomain\applications\webapp
    to
    c:\bea\wlserver6.0sp1\config\mydomain\applications\cocoon
    10. Edit the following file
    C:\bea\wlserver6.0sp1\config\mydomain\startWebLogic.cmd
    to modify the classpath with the following lines:
    set COCOON_ROOT=c:\xml-cocoon2
    set
    COCOONCLASSPATH="%COCOON_ROOT%\lib\xerces_1_3_1.jar;%COCOON_ROOT%\lib\xalan-
    2.0.1.jar;%JA
    VA_HOME%\lib\tools.jar;%COCOON_ROOT%\build\cocoon\cocoon.jar;%COCOON_ROOT%\l
    ib\logkit.jar
    ;%COCOON_ROOT%\lib\w3c.jar;%COCOON_ROOT%\lib\fop-0_18_1.jar;%COCOON_ROOT%\li
    b\avalon-fram
    ework.jar;%COCOON_ROOT%\lib\avalon-excalibur.jar;%COCOON_ROOT%\lib\bsf.jar;%
    COCOON_ROOT%\
    lib\batik-all.jar;%COCOON_ROOT%\lib\hsqldb.jar;%COCOON_ROOT%\lib\jakarta-reg
    exp-1.2.jar;%
    COCOON_ROOT%\lib\javac.jar;%COCOON_ROOT%\lib\jimi-1.0.jar;%COCOON_ROOT%\lib\
    jstyle.jar;%C
    OCOON_ROOT%\lib\xt.jar;%COCOON_ROOT%\lib\maybeupload.jar;%COCOON_ROOT%\lib\r
    hino.jar;%COC
    OON_ROOT%\lib\Tidy.jar;%COCOON_ROOT%\lib\velocity-1.0.1-rc1.jar"
    set CLASSPATH=.;.\lib\weblogic_sp.jar;.\lib\weblogic.jar
    set CLASSPATH=%COCOONCLASSPATH%;%CLASSPATH%
    11. Continue to edit the same file by inserting the following system
    property into the java run command for Weblogic:
    -Dorg.apache.cocoon.components.parser.Parser=org.apache.cocoon.component
    s.parser.XercesPa rser
    In other words, after you modify the java run command, it should look
    something like this:
    "%JAVA_HOME%\bin\java" -hotspot -ms64m -mx64m -classpath
    %CLASSPATH% -Dorg.apache.cocoon.components.parser.Parser=org.apache.cocoon.c
    omponents.parser.XercesPa
    rser -Dweblogic.Domain=mydomain -Dweblogic.Name=myserver "-Dbea.home=C:\bea"
    "-Djava.security.policy=C:\bea\wlserver6.0sp1/lib/weblogic.policy" -Dweblogi
    c.management.password=%WLS_PW% weblogic.Server
    12. Save the startWebLogic.cmd file.
    13. Run the startWebLogic.cmd file.
    14. Using a browser, link to your web site's cocoon page:
    http://<your machine name>:<port number>/cocoon/
    (Don't forget the final / in the link)
    15. You should see the Cocoon welcome page.
    Hope this helps,
    Scott

    Hi Dipendra,
                         For running the Adobe application You need to configure some thing in both Java as well as in ABAP stack for that abobe form application to work. You need to do some configuration in the Visual administrator for Java & also in the ABAP stack sidi using your SAP user id line creating ADSUSER , ADS_AGENT    user id creation and roles assignment and RFC destination creation etc..          
    Just refer these documents for the installation and post-configuration of Adobe Document Service on NW2004s.
    https://websmp105.sap-ag.de/~sapdownload/011000358700003982082006E/InstallADSNW2004s_Jun06.pdf
    https://websmp105.sap-ag.de/~sapdownload/011000358700005526362005E/ADS_NW2004s_SPS12.pdf
    https://websmp105.sap-ag.de/~sapdownload/011000358700005299622006E/ADS_SizingNW2004sV2_1.pdf
    You can start by read the note 736902 to get the credentials for the ADS.
    Hope this answers your question.
    Thanks,
    Greetson

Maybe you are looking for