How to install Software Deployment Manager

Hi!,
I have downloaded the PDK files and want to deploy it? How do I deploy them? As per help I need SDM ( Software Deployment manager to deploy this files, from where I will get software deployment manager and how to use SDM to deploy PDK files...please help...
Also I have more query...
In my netweaver studion, when I goto window-->preference, why I can't see software deploment manager link?  this SDM is used to deploy WebDynpro application with Enterprise portal....
Please help me....
Thanks !

hi
software deployment manager installed automatically in central instancc while installing sap netweaver .
Thanks
Bharathi.Ch

Similar Messages

  • Software Deployment Manager Starting problem

    Hi,
    I had installed netweaver for Java edition. I can open my portal using http://localhost:50000/irj/portal. i am wondering how to open the Software Deployment Manager. Can some one help me in finding Software Deployment Manager.
    cheers
    ram

    hi Anil,
    I am sorry, let me rephrase the question. I couldnot locate where can i find this SDM. can you tell me where can i find this SDM.
    cheers
    ram

  • Software deployment manager to deploy JDBC driver

    Hi Guys,
    I am trying to Install JDBC drivers for the
    ORACLE 10.2.0.2.0.  I dont know where Software Deployment Manager will be. Please let me know the URL. I have a guide HowToInstallExternalDrivers.pdf.
    Thanks
    Rajanikanth

    Hi Barry,
    I went to the program and listed, i see all all the below.
    RemoteGui.bat
    RemoteGui.sh
    Snap0001.20070609.020233.671794.trc
    StartServer.bat
    StartServer.sh
    backup
    bin
    config
    core.20070609.020233.671794.dmp
    dev_SapStart
    doc
    inBox
    instfiles
    To Start SDM i need to give the command $StartServer right
    Thanks
    Rajanikanth

  • How to install Adobe Application Manager?

    How to install Adobe Application Manager? I downloaded it, but can't install.
    Just purchased the CC for photographers.  Have been using Photoshop since version 3.
    I have been studying your support docs for several days and have no business messing around with something called, .gz files and installation logs. Totally unsuccessful "Updating" my CS6 or CS6 bridge or Extension Manager or the Adobe Support Advisor by the CC Desktop.
    Have no Photoshop CS6 because I followed your CC support instructions.
    Uninstalled my CS6 today so I can finish a job tomorrow.  Bad decision on my part because I can't reinstall it and am unable to correct
    this problem. 
    I was able to use CC to update LR, but am absolutely too afraid to touch it now.
    I have been waiting inline for Chat also, but the numbers ahead of me are going up.
    If someone in this Community forum can help me, it would be fabulous.
    Thanks very much.

    Uninstalled Creative Cloud.
    Downloaded it again - 4th time.
    Deleted a AAMDetect file from the Library/Internet Plug-ins
    Downloaded and installed Adobe App Manager and an icon for it is on my Desktop
    Installed Creative Cloud.
    OK.
    Now how do get my Photoshop CS6 back before I download Photoshop CC?
    CS6 is not listed in the available Apps in the CC Desktop.
    Support wait time right now is 2 hours by phone.
    After sitting on Chat yesterday only to see the people "waiting ahead of me" go from 17 to 18, I gave up.
    Please advise.
    Thanks again.

  • How to Install SQL Enterprise Manager ?

    The standard installation file which sap gives sql4sap.vbs doesnt install the Enterprise manager.
    How to install SQL Enterprise Manager (ECC6+Win2003).
    regards,
    dev

    Hi,
    Server type is normally "Database Engine". You can use the Dev. Studio to connect to various other types (e.g. Reporting Services, Analysis Service etc.)
    The Servername is the instance name you want to connect to. For a default instance it is your machinename, for a named instance it is Machinename\Instancename.
    Authentication can be Windows Authentication if you are logged on as a local Admin. For an ABAP System only Windows Authentication is possible, for a JAVA System the SQL authentication is necessary, so that you can logon as 'sa' with the password you provided in the setup.
    Regards
      Clas

  • How to Install Analytic Workspace Manager 10.1.0.4.

    Hi,
    how to Install Analytic Workspace Manager 10.1.0.4.?
    Many thanks before.

    Thank you, we have this :
    SELECT COMP_NAME, VERSION, STATUS FROM DBA_REGISTRY WHERE COMP_NAME LIKE '%OLAP%';
    COMP_NAME VERSION STATUS
    OLAP Analytic Workspace 10.2.0.1.0 VALID
    Oracle OLAP API 10.2.0.1.0 VALID
    OLAP Catalog 10.2.0.1.0 VALID
    Is Analytic Workspace Manager installed ? How to know its version ?
    Thank you.

  • How to install only catalog manager in obiee 11g client

    hi,
    i have obiee 11.1.1.5 sever on linux & client on windows.
    since obiee 11g client does not comes with catalog manager.
    how to install only catalog manager on windows machine.
    Just to access catalog manager, Do i need to install fresh DB & OBIEE on windows?
    thanks,

    Hi,
    Download Client tool below link and also via BI Presentation Administration home page
    http://www.oracle.com/technetwork/middleware/bi-enterprise-edition/downloads/bus-intelligence-11g-165436.html
    Note: catalog manager is present in obiee11.1.1.6.0
    Thanks
    Deva
    Edited by: Devarasu on Oct 24, 2012 3:41 PM

  • How to install the Workflow Manager for 10g ?

    how to install the Workflow Manager for 10g ?
    where can I find the information ?

    Ting,
    When you install the workflow server from the 10gdb DB, it will install the workflow manager as well. Please make sure you read the Metalink note 265554.1 for known issues and tips. Make sure you give the correct information in the WFCA as mentioned in the metalink note.
    Cheers,
    Raja

  • How to install the Workflow Manager for ?

    how to install the Workflow Manager for ? where can I find the information ?

    Ting,
    When you install the workflow server from the 10gdb DB, it will install the workflow manager as well. Please make sure you read the Metalink note 265554.1 for known issues and tips. Make sure you give the correct information in the WFCA as mentioned in the metalink note.
    Cheers,
    Raja

  • How to install LenovoEMC Storage Manager for Linux: Version 1.4.4.14439

    An Small step by step how to install this app. I this first example it was installed on Red Hat 6 Linux
    How to install LenovoEMC Storage Manager for Linux: Version 1.4.4.14439.
    1 - Download it from https://lenovo-na-en.custhelp.com/app/cust_alp/p/1031,1150
    2 - Change File permissions ( chmod +x setup-1.4.4.14439.bin)  
    3 - Now you can install so execute this sintaxis : ./setup-1.4.4.14439.bin
    4 - When app installation finishes, you must do it with this file into folder installation (chmod +x LenovoEMCStorageManager)
    5 - Then to open the app execute it: ./LenovoEMCStorageManager
    Video Tutorial
    How to install LenovoEMC Storage Manager for Linux: Version 1.4.4.14439
    In This second example I installed same version on Ubuntu 13.10. Look at the end of messages of thread and you will see this steps
    Install Storage Manager setup-1.4.4.14439.bin in ubuntu.
    Attachments:
    lenovoemcstoragemanager.jpg ‏27 KB

    Hello everyone ,
    I have a lenovo px4-300d, I'm on Ubuntu 13.10 64bits with Gnome 3 as GUI and I'm trying to install  the LenovoEMC storage Manager but it failed  :
    Preparing to install...
    Extracting the JRE from the installer archive...
    Unpacking the JRE...
    Extracting the installation resources from the installer archive...
    Configuring the installer for this system's environment...
    Launching installer...
    Graphical installers are not supported by the VM. The console mode will be used instead...
    Preparing CONSOLE Mode Installation...
    ===============================================================================
    Choose Locale...
        1- Deutsch
       ->2- English
        3- Español
        4- Français
        5- Italiano
        6- Nederlands
        7- Português  (Brasil)
        8- Svenska
    CHOOSE LOCALE BY NUMBER: 2
    =======================================================
    Installer User Interface Mode Not Supported
    The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The valid UI modes identifiers are GUI, Console, and Silent.
    =======================================================
    Is it still aproblem with the 64 bits architecture ?
    Have you find any solutions ? Thank you very much

  • How to Install and deploy Oracle Discoverer in Oracle AppServer 10.1.3.2

    I need to know how to install and deploy Oracle Discoverer in Oracle Application Server 10.1.3.2?

    Hi
    Discoverer doesn't install into OAS 10.1.3.2. It uses 10.1.2.1 or 10.1.2.2.
    When you install Discoverer it installs its own OAS components.
    Best wishes
    Michael

  • How to install software to ipod touch

    Bought a used ipod touch 1st Gen. from ebay. I erased it and dont know how to install software and os 5.0.

    A 1G iPod can go to iOS 2.2 via iTunes and iOS 3.1.3 via
    Purchasing iOS 3.1 Software Update for iPod touch (1st generation)                   
    https://buy.itunes.apple.com/WebObjects/MZFinance.woa/wa/touchLegacyLandingPage
    To more easily find compatible apps:
    iOSSearch - search the iTunes store for compatible apps.
    Apple Club - filter apps by iOS version.

  • How to install software from imac to macbook pro

    how to install software from imac to macbook pro

    Are you using one of the newer iMac's with no DVD drive? If so, you can either get an external CD/DVD drive (any make - doesn't have to be Apple) or, if you have another Mac on the same network that has a CD/DVD drive you may be able to do it by turning on 'DVD or CD Sharing' on that Mac (System Preferences>Sharing). Hopefully you'll see the disk on the Mac without the DVD drive and be able to install from there.

  • How to install software from disk onto imac

    how to install software from disk onto imac

    Are you using one of the newer iMac's with no DVD drive? If so, you can either get an external CD/DVD drive (any make - doesn't have to be Apple) or, if you have another Mac on the same network that has a CD/DVD drive you may be able to do it by turning on 'DVD or CD Sharing' on that Mac (System Preferences>Sharing). Hopefully you'll see the disk on the Mac without the DVD drive and be able to install from there.

  • How to install / activate 'Yard Management' and BC sets

    Hi everyone
    I've been asked to look into how to install/activate
    'Yard Management' for business warehouse. From what I've found so far online/in SDN forums, it looks like you need to activate it under Logistics Execution in SPRO. But it's not there... so looks like I need to install the necessary 'BC sets' ??
    I've found a spreadsheet for 'W70 Yard management' with some
    technical names for these BC sets, like
    /SMB30/LYYRD_V_B031_D70, /SMB30/T30B_V_B032_D70 etc.
    Any idea what these are / whether and where you can get them
    (downloadable from SAP??) what transaction you use etc???
    Thanks!
    Ross (Basis guy)
    Edited by: Ross Armstrong on Jun 18, 2008 9:13 AM
    It seems we need this on a 4.7 SAP system, whereas this other docs/installing via Best Practices seems to be for ECC5 onwards... any ideas anyone?

    You should activate 0ANALYSIS_PATTERN (and all necessary objects).  Use this as starting point for customizing your own template.  Then use SPRO transaction RSCUSTV27 to change fields "Broadcasting" and "Ad Hoc Analysis" to your customized templates.
    Activate and customize 0QUERY_TEMPLATE_BROADCAST_PDF if you need to broadcast PDF's.  There's no place SPRO that I know of where you can configure this to use a custom template.
    You don't need 0QUERY_TEMPLATE_BROADCASTING70.  It's labeled 70 but in fact it's a 3.5 web template.

Maybe you are looking for

  • Addon Start error - The system cannot find the file specified

    All, I am getting the above error when trying to connect an add-on. It's the budget editor in the SDK Samples. Compiled in vb.net, with the installer created from B1DE. The addon installs without a problem. It is only when connecting the add-on in th

  • Import manager getting closed while importing

    when i am trying to import the excel sheet thru import manager,the import manager is getting closed in the step while it is getting "prepared for importing the records." Can someone tell me why it is so.

  • Setting S-curve Values in LabWindows​/CVI

    I am using a 7344 motion card in an embedded system without the benefit of MAX, so it is being initialised by adapting the InitialiseFM.c template provided by NI. This works OK until I come to adjusting the S-curve times, but putting different smooth

  • CS3: brightness problem after rendering

    Hello everybody, I'm using Premiere Pro CS3 and I have a problem when I use Adobe Media Encoder to render my HDV 720p project: the final result looks brighter than the original footage on the timeline. Anybody had the same problem? Could you please h

  • How to convert a Image object to byte Array?

    Who can tell me, how to convert Image object to byte Array? Example: public byte[] convertImage(Image img) { byte[] b = new byte........... return b;