How to install Solaris 8 as the third OS?

Hi all
I'll appreciate anyone who could guide me how to install Solaris 8 in my PC which runs on an Intel Pentium III
Currently, I've installed Windows 2000 on the first partition, Red Hat 7.2 on the second partition. Only the first partition is primary, the second is logical partition. However, I don't use LILO as the boot manager. I use Window's boot manager instead.[I modified the boot.ini a little bit]
Now, I want to install Solaris 8 which can be installed on a Intel processor, on the third partition. However, I heard that it's very difficult to install Solaris so that I really need your advices from all of you. Thanks a million!
Best regards,

Hi,
I am also dealing with the same. For these three to sit, in your case, create a partition from fdisk of Linux which can be identified by solaris8. Then when you startoff installing solaris8, the OS should be in a position to capture that partion. If that won't happen, using Solaris8 fdisk is very dangerous. You can not preserve your old data. Try this way.

Similar Messages

How to install solaris 8 with a nvidia M64 agp ?

How to install solaris 8 with a nvidia M64 agp ?

Use kdmconfig. Make sure your running MU3 or greater because there are some patches
specific to the M64 cards that are needed to run in the hi res modes.
---Bob

How to install Solaris 9 connected via Hyper Terminal

Hi All ,
We have planned to Install Solaris 9 in E250. We have connected the console throgh Hyper Terminal.
We are not able to see the options clearly in the console. The options are not in clear way. It is very difficult to install.
Please advice how to install Solaris 9 in Text mode and terminal type for installing the solaris 9 via Hyper Terminal.
I am awaiting for your reply.
Regards,
R. Rajesh Kannan.

When the install starts, select a terminal type of VT100
The screens should display correctly then.

How to install Solaris from a Windows computer

I have recently received the Solaris operating system on DVD. The only computer that I have that has a DVD player is my laptop. It is however connected to the desktop that I wold like to install the system onto by a switch. I am not sure how to go about installing solaris over the LAN onto the desktop. This is the current setup.
The desktop has Ubuntu with no direct connection to the internet. The Laptop has a wireless connection to the net with Internet connection sharing enabled. The two are connected via a switch and the laptop acts as a router to assign the ip address for the desktop. I would like to know how I can Install Solaris to the desktop over the network from the windows laptop.
Please help!
Thanks.

Yes it does. I did that before but I could never get the image to boot after recording it to cd.
Thanks for the reply by the way. I actually found some articles that I am reading through at:
http://docs.sun.com/app/docs/doc/817-5504/6mkv4nh3p?a=view
This seems to be going in the right direction. My next question I guess will be how to boot the client from the network. I am not sure how to map the boot procedure to the server. Any ideas are welcome.

How to install Solaris 10 on sun ultra enterprise 450

I just got a used sun ultra enterprise 450 and need to get a username and password. If I cannot get easily how do I reinstall the OS. What OS can I put on its? I am new to some equipment. It also came with a a storage unit for extra hard drives and how would I use it and set it up also?
It now says type ctrl-d. What do I do?
http://www.unix.com/sun-solaris/114206-how-get-root-password-how-install-sun-os.html
http://www.linuxquestions.org/questions/solaris-opensolaris-20/how-to-install-solaris-10-on-sun-ultra-enterprise-450-739614/

This same question was cross-posted to another forum site
[http://www.linuxquestions.org/questions/solaris-opensolaris-20/how-to-install-solaris-10-on-sun-ultra-enterprise-450-739614/|http://www.linuxquestions.org/questions/solaris-opensolaris-20/how-to-install-solaris-10-on-sun-ultra-enterprise-450-739614/]
with the same unintelligible drivel.
O.P.
Go to Docs.Sun.Com and get the system's documentation. Also go get the OBP 3.x Command Reference manual while you are there. All you questions are answered in that documentation, except for those that are easily found with Google.
[Example of a Google search for your question.|http://www.google.com/#hl=en&q=solaris+root+password&aq=f&oq=&aqi=g9&fp=KxYPMM6r3XA]

HT3546 I can't figure out how to install bonjour from the CD that came with my airport express. Can anyone help?

I can't figure out how to install bonjour from the CD that came with my airport. Can anyone help?

If you are having difficulties installing Bonjour from the Installation CD, you can download the latest version of Bonjour from here.

How to install and configure the SQL Server

Hi All,
We have to install SQL server in the new server because the old server is crash and need to upgrade. Please advice How to install and configure the SQL Server to run SAP Business One 8.8 successfully and what part we do have to give attention.
Kind Rgds,
Steve

Hi,
Try this solution:
The step-by-step installation guide can be found in the documentation included in the installation media. (\Documentation\SystemSetup\AdministratorGuide_SQL.pdf).
Below are some important parts that you should pay attention to during the Installation process.
Resolution
Collation setting: It must be set as SQL_Latin1_General_CP1_CI_AS,even the company DB is non-english location. The company DB will be created as corresponding collation settings automatically.
Instance and TCP Port : It is recommended to run SBO on default instance and TCP port 1433. Otherwise,some optional components such as B1i may not work properly.
Native Client: SQL Server Native Client should be installed on every client machine to enable the ODBC connection to DB server.
Rgds,

How to install and use the Khmer unicode Khmer MEF1 and Khmer MEF2?

How to install and use the Khmer unicode Khmer MEF1 and Khmer MEF2?
from www.mef.gov.kh in the bottom of the page, you can get the unicode for the ms office

I think that stuff is for windows, a waste of time trying to use it on a Mac.
There is no need to download anything for Khmer on a Mac. Apple provides Khmer fonts and keuyboards with OS X.
OS X Mountain Lion: Type in another language
MS Word for Mac does not support Khmer. Use TextEdit, Pages, Nisus Writer, LibreOffice instead

Installing solaris from the hard disk

i am new to solaris. i just wanna know is there a way of installing solaris from the hard drive

If you are new to Solaris I would advise you to stick to CD installations. Atleast in the beginning.
Having advised that, it is known that installing from cd can be a bit tricky is getting the install going.
Don't be supprised if your first attempt fails with disk-read errors. Try again.
More specific in relation to your question:
Solaris has many ways in which you can install the os, and from hardisk over the network to the machine to be installed is one of these possibities.
If you where thinking about doing the install from one partition to an other partition of the harddisk, that I am afraid I have to dissapoint you.
NB: for every version of Solaris there are several Installation documents on the web: docs.sun.com

How to install and start the adapter(FILE)

hi,
when i checked in RWB for the adapters which are INSTALLED and STARTED adapters it's displaying all adapters except FILE adapter .
I need to known whether this adpater is installed or installed and started ,if the case then how to install and start the adapter

Hi Nandan,
if above is the case as i mentioned in previous response then,
You need to download the latest SAP BASIS 6.40 or 7.0 ".tpz file" (as per you service pack) from service.sap.com. Then you need to put this in the import directory:
<b>\usr\sap\<your system-id>\SYS\global\xi\repository_server\import\importedFiles</b>
Now go to
<b>IR>Tools>Import design Objects, you will find the .tpz file which you down loaded. Import this and refresh your cache.</b>
P.S This is the exact path in market placehttps://websmp205.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=SEARCH&HIDE=&SEARCH_SPAT=X&SEARCH_BPAT=X&SEARCH_CD=X&SEARCH_P=X&SEARCH_PV=X&SEARCH_C=X&SEARCH_CV=X&SEARCH_TA=&SEARCH_V=&HIDE_EXPERT_SEARCH=X&SEARCH_MAX_RESULT=20
Regards,
Sarvesh

How to install Soap on the (Apache) Oracle HTTP Server

Hi,
Does anyone know how to install SOAP on the Oracle HTTP Server? I downloaded a soap version (it seems that the standard version comes without SOAP) from the xml.apache.org site and followed the installation instructions as far as I could (only Tomcat is described). However, no 'soaping'!!! Maybe I'm overlooking something because I cannot imagine that it should be difficult.
Thanks in advance!
Hans

Hans, the SOAP implementation is part of OC4J. You get it out of the box. Check out how to use the out-of-the-box implementation in the tutorials on Web services with Oracle9i JDeveloper at:
http://otn.oracle.com/tech/webservices/htdocs/series/content.html
These tutorials/samples use the implementation of SOAP/WSDL that Oracle calls J2EE Web Services and this is the long term direction of Oracle's Web services implementation. This implementation is what Oracle will be evolving to Sun's Java Web Services Developer Pack as it finalizes into J2EE 1.4.
If you want to use Oracle/Apache SOAP, this too is included in OC4J but its support is being deprecated in future releases of Oracle9iAS in favour of the J2EE Web Services implementation. To find it, check out the OC4J/soap/webapps/ directory for the soap.ear file (it is in a slightly different spot if you are using the full Oracle9iAS R2 but still within the soap directory structure. Simply add <application name="soap" path="../../../soap/webapps/soap.ear" auto-start="true"/> to your OC4J server.xml and <web-app application="soap" name="soap" root="/soap" /> to your OC4J http-web-site.xml, re-start and away you go.
Finally, just to be sure, SOAP support in Oracle9iAS did not appear until 1.0.2.2.x and higher. If using 1.0.2.1 or less, you are correct, there is no SOAP support.
Mike.
Most folks that try out the J2EE Web Services find it is pretty easy to use so

How to install rac on the vm ?

how to install rac on the vm ?
Hi everybody,
i want to install to Oracle RAC on the 2 nodes.
i installed oracle enterprise server on the servers.
And i have' t got a another storage, so i shared the disks of the node1 and i mounted the disk on the node2. when i share disk, i used the nfs file system.
This method is a problem for the setup, will you?
DO you explain step by step how to install oracle 11g rac on the vm ?
thanks.

Hi,
DO you explain step by step how to install oracle 11g rac on the vm ?Refer link:
http://www.oracle-base.com/articles/11g/OracleDB11gR1RACInstallationOnOEL5UsingVMwareServer2.php
Regards,
X A H E E R

How to install windows on the SSD (Y580)

I have bought an Y580 recently wIth a 64GB SSD and 1TB HDD. I asked the salesperson upfront if the OS would be on the SSD. He said yes. Turns out that it is not. When i returned to them they told me it's a hybrid drive solution. And they have no idea how to install Windows on the SSD.
I did some research and found out that Lenovo uses *Rapiddrive* to speed up programs. Hence why i can't see the SSD in WIndows as it is merged with the 1TB HDD. In Disk management 2 disks show , 0 and 1 , but Windows asks to give disk 1 a MBR or GPT (this is apparantly due to the rapiddrive methode).
My questions:
* Is it possible to install Windows on the SSD and if so how can that be done without loosing the backup on the hidden partition of the 1TB disk? (so that OKR still works)
* What are the benefits of Rapiddrive over using the SSD as bootdisk?

Since it is a hybrid drive, it works a little bit differently; Lenovo's "Rapiddrive" is also different from other hybrids, and in the sake of making it "user friendly" and seen as a single disc they have probably nerfed some configurability for the intermediate/advanced users. However, Windows should already be installed on the SSD portion of the drive, this should be done automatically according to this press release:
http://shop.lenovo.com/us/sitelets/ee/consumer-news
"In the factory we will preload not just Windows 7 on the SSD, but also our Lenovo applications like OneKey™ Theater or OneKey™ Rescue System. The applications, operating system, drivers and other files are all fully-optimized for Enhanced Experience to make them load much faster. This, combined with their installation on the SSD will make the boot time to Windows desktop even faster. Some portion of the SSD will also be reserved as the Windows Paging File — this is used by Windows as 'virtual memory' additional to the normal RAM installed inside the computer. With the SSD acting as the Paging File, general Windows 7 performance will also benefit, especially when multitasking several applications.
The remaining space, which will typically be around 15GB on a 32GB SSD, will be empty, ready for the user to install their favorite applications and files."
I have some of the fastest SSD's around installed on my desktops (SATA III), and while they are blazing fast, keep in mind the whole boot sequence still isn't going to be instantaneous even with an SSD (the biggest differennce you will notice is by the time Windows is loaded, it's fully loaded to the RAM, whereas a normal HDD you may see the desktop but your PC will still be cranking away with startup processes). If your startup is taking 30 seconds or less, maybe even a little longer, it's probably accessing the SSD just fine; if it's taking closer to 60 seconds, then yeah it may need to be reinstalled/reconfigured.
As for reinstalling, sorry I won't really be able to help, hopefully someone else can come along; I personally have never used OKR anyways, and aside from doing a ghost backup I wouldn't say for sure that OKR would be salvageable with a fresh install. And because the Rapiddrive is its own technology, half SATA half PCI-E, I also couldn't tell you if it's even possible to fully seperate the two and keep them as distinct drives.

Leopard DVD is far away. How to install XP without the leopard dvd?

ok. Leopard DVD is far away abroad with my sister.
How to install Xp without the DVD? Is there anyway to get the drivers that are to be installed from the dvd after installing Xp?
I really need to use Autocad and Rhino on my Macpro, so Parallels or VMware fusion is not an option. I am already using VMware fusion on my Macbook pro, but VMware will not use 4g RAM of my Macpro which means it would be hard to run Rhino.
By the way, I am planning to buy Windows (I am sooooo ashamed to install that self-messed up OS on my Macpro. but so what,,, Autocad and Rhino do not run on Mac, and I need specifically the two programs). XP with sp2, sp3, or vista. which one is the best option?
Since my Macpro has only One 2.8GHZ Quad-Core Intel Xeon, there is no need to buy XP professional? (XP home doesn't support multi-processors, and XP Pro does, I guess?)
Message was edited by: GoodmorningNightmare

GoodmorningNightmare wrote:
There are some parts that I don't understand.
VMware Fusion uses only 512 RAM maximum, doesn't it? But you said it will use my entire 4GB RAM but only 2 cores. That's something different from what I've known.
If fusion really uses 4gm RAM of my mac pro, I don't really have to use Boot Camp. But most people who need to run heavy programs in Windows choose Boot Camp because it's the only way to use a Mac just like a PC, meaning that the XP uses the entire RAM memory.
XP will only use 2 GB of RAM, no matter how much the system has.
I just found out that Rhino doesn't really work on Vista. So vista is ruled out.
Only Vista 64-bit recognizes all system RAM.

How to install and verify the license file on ASA 5512-x

Hi Friends,
How to install and verify the license file on ASA 5512-x Firewall. I have lincese pak for CX and web security essential.
What need to be done? can i install this lic file on firewall or need to be install on CX server. Because i dont have the CX server right now.
Please share me document for installation of this license.
thx
Ashish Kumar

Hi,
one possible solution is to use an intermediate array. The intermediate array should be used in the user interface. When new data is entered the VI should read each element and then compare to the elements in the stored array. If all elements are different then update the array, otherwise display a fault message.
You could use asequence activated when the Enter button is pressed. In the first frame you would compare the First array with the stored array. it is probably best to use a Boolean indicator to show if the data is valid Make sure you declare this as a local variable.
With the sequence you can perform the comparisons in several seperate frames or in one frame with a OR to link the results. For large numbers of comparisons I prefer to use m
ultiple frames because otherwise the screen becomes a maze of wires and other programmers who may need to maintain the code in the future will find it hard to follow a single frame.
Once all the data items have been compared then the following sequence should contain a CASE statement of type True/False. Link a readable copy of your local variable to the selector of this statement. Then in the FALSE case (Assuming you have linked the boolean to be false when no data is duplicated) copy the new array to the stored array. In the TRUE case bring up an error message.
So long as your arrays are not too large and you do not use this technique in too many places in your code the processor overhead should not be badly affected. For frequent use of such a caomparison in several VIs you may want to create a dedicated subVI for the task. For very large arrays you should seek a different solution.
Hope that helps a bit.
Good luck,
Shaf

How to install Solaris 8 as the third OS?

Similar Messages

Maybe you are looking for