How to Install Solaris 8 on 40 Gb HD

Hi Every1,
I am new to this forum.I am facing a problem while installing solaris 8 (intel Platform) on 40 gb hard disk.I think solaris not detcting the 40 gb hard disk it is showing 5 gb only.Can anyone help me from this problem.Any sort of help sholud be greatly appericiated.
Thnaks & Regards,
Varma.

Thanku for you u r suggestion.But i have a small doubt,First i have to intall on 5.9 gb space then after installing solaris i have to run the Patch right? or i sthere any other way ? please kindly help me.
Thnaks,
Varma.

Similar Messages

How to install solaris 8 with a nvidia M64 agp ?

How to install solaris 8 with a nvidia M64 agp ?

Use kdmconfig. Make sure your running MU3 or greater because there are some patches
specific to the M64 cards that are needed to run in the hi res modes.
---Bob

How to install Solaris 8 as the third OS?

Hi all
I'll appreciate anyone who could guide me how to install Solaris 8 in my PC which runs on an Intel Pentium III
Currently, I've installed Windows 2000 on the first partition, Red Hat 7.2 on the second partition. Only the first partition is primary, the second is logical partition. However, I don't use LILO as the boot manager. I use Window's boot manager instead.[I modified the boot.ini a little bit]
Now, I want to install Solaris 8 which can be installed on a Intel processor, on the third partition. However, I heard that it's very difficult to install Solaris so that I really need your advices from all of you. Thanks a million!
Best regards,

Hi,
I am also dealing with the same. For these three to sit, in your case, create a partition from fdisk of Linux which can be identified by solaris8. Then when you startoff installing solaris8, the OS should be in a position to capture that partion. If that won't happen, using Solaris8 fdisk is very dangerous. You can not preserve your old data. Try this way.

How to install Solaris 9 connected via Hyper Terminal

Hi All ,
We have planned to Install Solaris 9 in E250. We have connected the console throgh Hyper Terminal.
We are not able to see the options clearly in the console. The options are not in clear way. It is very difficult to install.
Please advice how to install Solaris 9 in Text mode and terminal type for installing the solaris 9 via Hyper Terminal.
I am awaiting for your reply.
Regards,
R. Rajesh Kannan.

When the install starts, select a terminal type of VT100
The screens should display correctly then.

How to install Solaris 10 on sun ultra enterprise 450

I just got a used sun ultra enterprise 450 and need to get a username and password. If I cannot get easily how do I reinstall the OS. What OS can I put on its? I am new to some equipment. It also came with a a storage unit for extra hard drives and how would I use it and set it up also?
It now says type ctrl-d. What do I do?
http://www.unix.com/sun-solaris/114206-how-get-root-password-how-install-sun-os.html
http://www.linuxquestions.org/questions/solaris-opensolaris-20/how-to-install-solaris-10-on-sun-ultra-enterprise-450-739614/

This same question was cross-posted to another forum site
[http://www.linuxquestions.org/questions/solaris-opensolaris-20/how-to-install-solaris-10-on-sun-ultra-enterprise-450-739614/|http://www.linuxquestions.org/questions/solaris-opensolaris-20/how-to-install-solaris-10-on-sun-ultra-enterprise-450-739614/]
with the same unintelligible drivel.
O.P.
Go to Docs.Sun.Com and get the system's documentation. Also go get the OBP 3.x Command Reference manual while you are there. All you questions are answered in that documentation, except for those that are easily found with Google.
[Example of a Google search for your question.|http://www.google.com/#hl=en&q=solaris+root+password&aq=f&oq=&aqi=g9&fp=KxYPMM6r3XA]

How to Install Solaris for Intel so that it boots off from a boot floppy?

Hi all,
Sorry to bother you with this one (I went through all documentations/manuals and could not find straight answers to following
specific questions):
I have one hard drive with 1st partition used by Windows XP and a second partition that's a blank FAT 32 (using Partition Magic)
I want to use for Solaris for Intel.
My very specific questions:
(1)That blank Fat32 partition: can I run the Solaris install over it ..or should I absolutely make sure that it's a blank UFS formatted
partition? I am asking you that because all manuals (except one) pretend that I can run my Solaris install on a blank Fat partition...
but I believe that documentation at multiboot.solaris-x86.org stresses that if the partition is not a blank UFS one, it wont install Solaris
(2)As you already know, some Oses like Linux or FreeBSD can be installed on a partition and be booted off a boot floppy.
So without that boot floppy, no trace of the OS. How can I do that with Solaris for Intel. I want my Solaris to boot off a boot floppy only.
BTW, I currently have Solaris 7 for Intel.
Thanks for the answers.

(1)That blank Fat32 partition: can I run the Solaris install over it ..or should I absolutely make sure that it's a blank UFS formatted You can install Solaris to that blank FAT32 drive but Solaris WILL convert it to UFS BEFORE doing the install. In other words, after the install it will be UFS and not FAT32 anymore.
So without that boot floppy, no trace of the OS. How can I do that with Solaris for Intel. I want my Solaris to boot off a boot floppy only.Not that I know of. Some people have reported booting Solaris off of a USB drive though.
alan

How to install Solaris 8 from Hard disk?

Hi.
Im downloading Solaris 8 from a free FTP server. Some body can explain me what i need to install Solaris 8 from my hard disk?

Well first if you are downloading the cd images to a non Solaris machine, they are ISO images that cd burning software and a cd burner will use to burn a bootable cd. After you create the cd's boot cd 1 of 2 and the install will begin. I read somewhere that if you download the images to a solaris machine you can mount the image as a CD and share it and then install directly from the image over a network. I am not too clear on exactly how that is done since I downloaded to W2K.
Lee

How to install solaris with downloaded binary.

dear all members,
I had downloaded solaris 8 binary in winnt, i found that it is a zip file containing one file with file extension .ml (sol-8-1_01-install-fcs-bin-ia-ml). How to install? need to format hardisk? what partition tool to use? where to get startup disk? need to write a CD? Where to get best docs available for beginer????
thanks for all guys...
from
ngkengyap

dear,
I am sorry to come back again. I have some problem. I read the documentation, is it solaris companion CD contains free software binaries for solaris. is solaris binari included? i need the documentation that tell me how to get started (as novice) to install solaris. I have downloaded the solaris binary, and how to do next?????
i hope some one can give me a kindness helping hand....
thanks...
from
ngkengyap

How to install Solaris 5.9 in existing Solaris 5.10 Sun v440 server

Hi All,
Solaris 5.10 is installed one of my system, i need to install Solaris 5.9 also on the same machine so how can i install the solaris 5.9 on my running server(Solaris 5.10). I have also word with HCL they told me take support from
sun.Actuall this is concept of LDOM. So need a help how can i prepare LDOM give me the solution.
Regards,
Sushil Yadav

Hi
Look here
http://www.sun.com/software/solaris/containers/index.jsp
(was my 1st hit with google using "solaris 9 zones").
Paul

How to install Solaris from a Windows computer

I have recently received the Solaris operating system on DVD. The only computer that I have that has a DVD player is my laptop. It is however connected to the desktop that I wold like to install the system onto by a switch. I am not sure how to go about installing solaris over the LAN onto the desktop. This is the current setup.
The desktop has Ubuntu with no direct connection to the internet. The Laptop has a wireless connection to the net with Internet connection sharing enabled. The two are connected via a switch and the laptop acts as a router to assign the ip address for the desktop. I would like to know how I can Install Solaris to the desktop over the network from the windows laptop.
Please help!
Thanks.

Yes it does. I did that before but I could never get the image to boot after recording it to cd.
Thanks for the reply by the way. I actually found some articles that I am reading through at:
http://docs.sun.com/app/docs/doc/817-5504/6mkv4nh3p?a=view
This seems to be going in the right direction. My next question I guess will be how to boot the client from the network. I am not sure how to map the boot procedure to the server. Any ideas are welcome.

How to install Solaris 10 with Win XP on 2nd Hard Drive

hi everyone,
I'm totally new to Solaris. As an enthusiast, I wants to install Solaris 10 on my Win XP PC's 2nd Hard Drive(40GB, empty) from Solaris 10 DVD.
I need help from how to format 2nd Hard Drive to how can I configure the PC so it asks me which OS to load every time.
I will highly appreciate everyone's help as I've just joined SDN. Many Thanx in advance, Jags

Happened upon this post while searching for an answer to something else and figured I would give my 2 cents on what you are trying to do so as to offer you some other ideas, as in stuff I have done personally in similar situations, just in case the other suggestions don't work out (and to avoid repartitioning your main hdd if it is your ONLY computer with an OS you have available).
Assuming you have a standard tower or mid-tower with at least 1 free 5 1/4" bay open, and if your motherboard doesn't support booting from a slave drive, and if you prefer a hardware solution so your OS installs are isolated from each other to be certain no corruption happens, like I personally do*. Then you may consider a pair of key lock internal hard drive racks (newegg search "hard drive rack ide" or sata). You would need at least 1 free 5 1/4" bay for the rack mount, then place the hard drives in their housings, each set as master, and you can stick in which ever OS drive you want, turn the key, then boot up (I recommend storing drives not in use in some large anti-static bags for protection). If you have 2 open slots, like I did on my tower, then you can connect both to the same cable and leave both in at all times. Just make sure ONLY 1 drive is keyed "on" at a time, or else you will get errors due to duplicate masters set. Also make sure you ONLY turn the keys when the system is OFF, the racks do NOT make the drives hot-swappable, it is only to offer an easier solution for using multiple hard drives on one PC so you don't have to open the case all the time and potentially damage the pins or the drives when switching them out.. Also you may need longer cables depending on the motherboard controller placement and the size of your tower, 80 wire 40pin if you are dealing with IDE (when you get longer I've noticed less 80 wire and more slower 40 wire cables). As always when dealing with the actual hardware, be extra careful, make sure power is off and PC is unplugged, touch the PC power supply if you don't have better solutions such as anti-static mat/wrist band, etc. You probably know all of this, but just making sure.
*I lost a lot of data one of the first times I tried an open source OS many years ago (some Linux distro, I forget which), I tried to repartition my windows 98 drive, it worked fine for about a week booting between the two, then most my personal windows files suddenly were random sizes and random folders ended up full of garbage files with garbage file names among other peculiar things.. If I partition a drive I generally only do it BEFORE I put data on it or install OS's.. or at least make CERTAIN that I have adequate methods for restoring my OS and personal files (such as imaging my OS install to a larger drive temporarily, etc)..
Anyway, was just offering some possible alternatives to repartitioning your main OS drive.. -TCP

How to install solaris when having no physical access to the machine

Hi,
I administer a Dell PowerEdge 2950 server with Windows Server 2003. The machine is in a rack located in a datacenter which I do not have any physical access to.
As most of server's systems are working on the Java platform, I'm interested in migrating to Solaris 10, however, it is not clear for me how can I do that.
I have full access to several machines in the office where I work and they have varied OSes (windows, mac, solaris). It seems to me that those machines are in a different subnet than the server (subnet masks are not the same). Also their Ip addresses are given dinamically (DHCP) whist the server's address is fixed (static). Currently, I can use any of these machines to open a remote desktop session to the Dell server.
Can I install solaris on that server taking into account the facts mentioned above? If so, how? using a network-based installation?
As the driver for the RAID controller is not bundled with the installation media, would it be still possible to apply the driver before beginning the installation (option 5. Apply driver updates)?
Hope you can suggest me something or shed some light on this.
Thank you

if you have 2 servers next to each other at datacentre, get somebody there to drop a install dvd into server you want to install it
next wire serial cable from 1 server to the other soon to be solaris server
and that's as good as it gets

How to Install Solaris 10 on Sun Server

Dear All,
Can any one help me to Install Solaris 10 on Sun Server.
Or if you guys can suggest me which document i can refer for Solaris 10 installation.
Thnaks in advance to all.
Rgds,
Shrinet

You can go to doc.sun.com for all Solaris documentation. This should be the link you need, which is for the latest version of Solaris 10 (10/09).
http://docs.sun.com/app/docs/coll/1236.11?l=en
If you need an older version, you can find them all here:
http://docs.sun.com/app/docs/prod/solaris.10?l=en&a=view
-- Alan

How to install Solaris 8 on IBM Thinkpad T20 laptop

Hello,
I would like to install Solaris 8 on my IBM Thinkpad T20 laptop and I am facing two kinds of problems:
-1- I cannot boot on the Matshushita DVDROM which is shipped with : i have got a boot panic ;
-2- My SAVAGE/IX 8MB Video Card is not recognised.
ANY HELP APPRECIATED
[email protected]

Hi There,
Although laptops are not officially supported, I am aware that another
customer managed to install their system over a network connection
due to local CDROM issues.
This may be something to try if you have access to another SOlaris System with a local CDROM.
As for the Video Card, I have not found any records of anyone
else attempting to use this particular chipset and so you may be
limited to just standard VGA in this case.
Regards
Derek SUN-DTS

How to install Solaris 9 8/20 x86 on an Ext. USB Disk

I am fairly new to Solaris. Does anyone know know to do an install to a completely separate ext. USB hard disk?
I think that it can be done since I can get through the initial installation CD with the partitions, slices, and MBR being created and the files copied over. However, when it comes time to reboot and continue, the CDA starts up from USB disk and lists 2 devices to boot -- CD & DISK. This is the problem, it keeps trying to load up from the IDE-PCI controller instead of the USB Disk. It has no problems loading from or booting up the CD.
BTW, this is running on a Dell Inspiron 5100 with the primary disk holding Windows XP. There is no extra room left on it. That's why I'm using the ext. usb disk.

Hm. I have a question. I'm using a Dell Inspiron 8600 and tried to install to my ext. USB drive for the same reason. Unfortunately, I couldn't even get as far as you. I got to the step where I choose the destination drive and my external was not listed. Do you know why that would be or how I would be able to install to my external drive?

How to Install Solaris 8 on 40 Gb HD

Similar Messages

Maybe you are looking for