How to install solution manager

Hi Folks, I'm new on SAP and getting problems to install SAP Best Practices Baseline Package PT V1.603. It asked me some dependencies and for download them it goes to the Approval List, means waiting for approval so to approve them to download i need to do it trough Solution manager and i don't have it on my SAP. When i go to the transaction dswp it shows nothing.
How can i install the Solution Manager to be able to download the dependencies for my BP.
best regards.
Nelson Chamba

Hi Nelson,
go to https://websmp201.sap-ag.de/support
then in 'Downloads' section go to 'SAP Installations & Upgrades', click on 'Installations and Upgrades - Entry by Application Group'
In entry 'SAP APPLICATION COMPONENTS' you ll find 'SAP Solution Manager'. There you ll find Installation Guides for Solman
All you need is there !
You ll also need the DVDs; they are downloadable on service.sap.com in the Software Distribution Center
Hope this helps
Regards
Khalil

Similar Messages

How to install Solution Manager 7.0 ehp 1 on Laptop

Dear Expert !
I have a laptop Sony Vio only support 32 bit, but I need install Solution Manager 7.0 EhP 1 on this laptop to test. So you can show me how to do that . I hope, you show me as soon as possible.
Thanks and Best Regards,
Tru Hang

Tru Hang,
Even when 32 bit Solution Manager was supported, it is very doubtful your laptop would have the required memory or diskspace to install and run the system. You can see the system requirements in the SAP installation guides.
Hope this information was helpful.
Regards,
Paul

How install solution manager using MCOD

Hello Eveybody,
I have install the IDES ECC 6.0 on single machine. Now I want to install the Solution manger using MCOD. but I dont Know How to ? Will anybody guide me how to install solution manager using MCODE,
I have HDD of 320 GB
Waiting for earlist reply
Thanks
Ganesh

Hello Ganesh,
For installing on MCOD, the database instance should be on the same database host. For installation when you run sapinst, you should mention the database id (DBSID) for the solution manager as the ECC6 database DBSID. It will then automatically pick the installation as MCOD.
In other words, the SAP SID during the installation should be the new system ID for solution manager but the Database SID should be mentioned as the existing DBSID.
For more info, refer the following:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50a1b7a6-8307-2a10-05bc-d4388cbd4201
Cheers,
Jazz

Can I install Solution Manager 7.0 in Window Server 2008 R2 Enterprise ed.?

Hi, SDN experts.
I am trying to install Solution Manager 7.0 in in Window Server 2008 R2?
I checked the the software requirement for SAP Solution Manager 7.0, it only mentioned Window Server 2003 and 2008 enterprise edition.
I am trying to install Solution Manager 7.0 in in Window Server 2008 R2 enterprise edition?
When I ran the Solution Manager Master Installer, the Pre-requisite Checker gave a warning message saying that it detected incompatible server version, that the server version is Windows NT 6.1 (Build 7601: Service Pack 1) (I guess it meant Window Server 2008 R2).
=======
The following Windows operating system version is supported: Windows Server 2003 (i.e. Version 5.2) and Windows Server 2008 (i.e. Version 6.0).
Current Windows version: Version 6.1, Service Pack 1.0, productive type: Server.
You can check the current version of you operating system by runningu2026u2026..
========
Can I actually install Solution Manager 7.0 in Window Server 2008 R2? Will this cause problem during the installation/post-installation if I ignore this message?
Thanks,
KC

Hi,
I think it is not straight forward to install SAP Solution Manager 7.0 in MS Window Server 2008 R2.
I am installing Solution Manager 7.0 , the installation encountered error on Create Java Users step (Phase 31 of 44). When I login to SAP solution Manager system through SAP GUI. I encountered this error:
"OS release Windows NT 6.1 7601 Service Pack 1 4x AMD64 Level 6 (Mod 44 Step 2) is not supported with this kernel (700)'
I found that it is because I am installing SAP Solution Manger 7.0 in MS Window Server 2008 R2, which the existing kernel version does not support.
Do you know which kernel I should install?
I browsed in:
SAP Application Components" SAP SOLUTION MANAGER" SAP SOLUTION MANAGER 7.0" Entry by Component" Solution Manager ABAP Stack
SAP KERNEL 7.00 64-BIT UNICODE --> Windows Server on x64 64bit -->MS SQL SERVER
I downloaded:
SAPEXEDB_291-20001361.SAR Kernel Part II (for Basis 7.00) 291
Is this the right Kernel patch I should use?
If it is the right kernel patch file, how do I apply the latest kernel to existing Solution Manager system? Can you give me some guidance on this?
Thanks,
KC

How to make Solution Manager 7.0??

Hi Experts,
I am totally new to Solution Manager.I have installed it & when it I am checking
System->status->component version--->Solution Manager 4.0
ST Stack is - 15.
How to make Solution Manager 7.0?Which Support pack level I need to apply to make it Solution Manager 7.0?
For EWA,MOPZ Configuration what should be the minimum stack level of ST??

Hello N.Das
Solman 7.0 IS Solman 4.0 . I mean only the name has been changed so it goes with version of Netweaver; nothing more than that. So you have Solman 7.0. right now !
concerning the minimum SP Level for functionalities EWA and MOPZ. There is no correct answer. In your current Level you already have both; but ( and that is especially the case for MOPZ) new features have been added since ST15.
Current latest Solman version is EHP1 ST23.
Depending on what functionalities you re interested in MOPZ you will be able to choose the minimum level required.
If i were you I would go for the last one, especially because it contains new bug fixes and valuable enhancement for MOPZ
On this link you can check what is in what version of Solman: https://websmp206.sap-ag.de/~form/sapnet?_SHORTKEY=00200797470000089906&
Regards,
Khalil

Configure TMS in fresh installed Solution Manager system

Hi Expets,
I have fresh Installed Solution manager. Configure TMS and now want to configure solution manger so that I can monitor all our SAP system from Solution manager. How I configure our SAP system in solution manager?
Also would like to know after TMS implementation if we like to use ChaRM or CTS+ so what changes required in current TMS setting? Thanks in advance.

Hello,
No Deejoy, I provided you with how to resource to do the things you requested.
TMS is transport Management System.
If you want to manage transports with an enhanced product CTS+ I provided the configuration guide.
If you want to implement ChaRM, I pointed you to the Wiki.
If you want to inegrate CTS+ with ChaRM, I also provided you with resources.
And lastly, I directed you to RKT-SOLMAN which can help you configure any aspect of Solution Manager.
But I do not see where I said to manage TMS on Satellite systems you need to implement ChaRM.
Charm was only raised, because you raised it in your question.
You have all the resouces you require to address everything you raised.
This is what is provided in my earlier reply.
Regards,
Paul

Question for installing Solution Manager & ECC 5.0

Any idea for installing Solution Manager 3.2 on Windows server 2003 with Oracle9i problem when install Database Instance. Installation failed when the intallation progress went to Oracle Post-Load Action.
The message from startsap log file is
"running C:\usr\sap\T01\SYS\exe\run/sapstart.exe name=T01 nr=03 SAPDIAHOST=saptest02 -Wait
start service SAP01_03 on machine
saptest02
OpenService of SAPT01_03 failed. Error#: 1060
CreateNamedPipe for
saptest02\pipe\SAP01_03 Failed, Extended Error #2
start service SAP01_03 on machine
saptest02
OpenService of SAPT01_03 failed. Error#: 1060
C:\usr\sap\T01\SYS\exe\run/sapstart.exe=>sapparam(1c): No Profile Used."
Another question is about installing the Oracle database software: should we choose Create Databse or not when install Oracle Server Software only?
Is my installation process as following correct?
->SELECT A PRODUCT TO INSTALL:
Oracle9i Database 9.2.0.1.0
->WHAT TPYE OF INSTALLATION DO YOU WANT:
Enterprise Edition
->SELECT A DATABASE SUITED TO YOUR NEEDS:
Software only
After end of installation
install Oracle9i Client 9.2.0.1.0->Administrator
Thanks a lot

Hi Shusen, I´m trying to do the same think (Install ECC IDES with Oracle 9i in one computer for educational propose), can you help me with this:
1.I made the same Oracle install process because when I tried with sapserver.cmd nothing happened, for that reason i made:
SELECT A PRODUCT TO INSTALL:
Oracle9i Database 9.2.0.1.0
->WHAT TPYE OF INSTALLATION DO YOU WANT:
Enterprise Edition
->SELECT A DATABASE SUITED TO YOUR NEEDS:
Software only
After end of installation
I did not install client, is this correct?
2.After install this, I run the sapins.exe but show me this error: INSTALL FIRST SAP J2EE ENGINE, I download the JAVA SDK from JAVA page (java_ee_sdk-5-windows) but did not fix the problem: Do you know what file is this? Or, where is it in the DVD installation?
Thanks in advance if you or somebody can help me and excuse me if the answers are obviously, but I´m not a system engineer I´m only try to install IDES for learn SAP WM.
Thanks.

Error while installing Solution manager

Hi,
It is urgent Please.
I am trying to install Solution manager 4.0 on Linux and Maxdb.
But during Phase Configure UME i am getting below error.
ERROR 2007-12-17 16:48:16
 CJSlibModule::writeError_impl()
CJS-30059 J2EE Engine configuration error. DIAGNOSIS: Error when configuring J2EE Engine. See output of logfile umconfigurator.log: '
java.lang.ClassNotFoundException: com.sap.security.tools.UMConfiguratorLoad
 at com.sap.engine.offline.FileClassLoader.findClass(FileClassLoader.java:691)
 at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:600)
 at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:578)
 at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:79)
TRACE [iaxxejsbas.hpp:460]
 EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2007-12-17 16:48:16
FCO-00011 The step runUMConfigurator with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|3|0|NW_UME_Configuration|ind|ind|ind|ind|1|0|NW_UME_Configuration_Doublestack|ind|ind|ind|ind|1|0|runUMConfigurator was executed with status ERROR .
Can anybody please give me the solution on this.
Vinnu.

1. Check the rights of the user with which you are installing.
2. Check if any firewall is running.
3. Check the JDK version, you should go with j2sdk1.4.2_09.
regards
tamilboy

Error on install Solution Manager : Jcmon(error 4). No space left on device

Hi
I am having a problem installing Solution Manager 7.0 EHP1- AIX 6.1 DB2 9.7
During the unpacking phase error:
FCO-00011 The step unpack with step key was executed with status ERROR (Last error Reported by the step: Execution of the command "/ tmp/sapinst_exe.4325530.1325543592/SAPCAR-x-v-i-r / usr / sap / SMG / SYS / exe / run-f / MidiasInstall / IMKernel/DATA_UNITS/K_701_U_AIX_PPC64/DBINDEP/SAPEXE.SAR, "finished with return code 4. Output
<html> <head> </ head> <body> An error occurred while processing option EhP1 SAP Solution Manager 7.0> SAP Systems> IBM DB2 for Linux, UNIX, and Windows> Central System> Central System (Reported by the last step error: Execution of the command "/ tmp/sapinst_exe.4325530.1325543592/SAPCAR-x-v-i-r / usr / sap / SMG / SYS / exe / run-f / MidiasInstall/IMKernel/DATA_UNITS/K_701_U_AIX_PPC64 / DBINDEP / SAPEXE.SAR, "finished with return code 4. Output:
Sapce: processing archive / MidiasInstall/IMKernel/DATA_UNITS/K_701_U_AIX_PPC64/DBINDEP/SAPEXE.SAR (version 2.01)
x jcmon
Sapce: error writing to / usr / sap / SMG / SYS / exe / run / jcmon (error 4). No space left on device).
Note: I downloaded the newest sapinst but not resolved.
SAPinst build information:
abi version: 722
make variant: 720_REL
build: 1296039
compile time: 26 Dec 2011 02:46:25
Media used:
51041320 - DB2 9.7 - Client
51041317_1 DB2 9.7 - RDBMS
51040438 - Export
51040437 - Installation Master
51040439 - Java SW Comp
51040584 - Kernel
Filesystem GB blocks Free% Used Iused% Iused Mounted on
/ dev/hd2 5:00 49 709 2.76 45% 8% / usr
/ dev/fslv00 15:00 15:00 15 1% 1% / usr / sap / SMG
any idea ?

Hi,
The /usr/sap file system looks fine.
Could you also check the file space on the /tmp file system? This is usually less and SAPInst can fill this up very quickly.
Ideal to create a seperate SAPInst directory rather than use the default /tmp/sapinst_instdir.
Regards,
Srikishan

Problem installing SOLUTION MANAGER in db2

Dear consultans;
I have a problem installing solution manager in db2.
In phase 'Import ABAP' the sapinst shows the following message:
Execution of the command "/usr/sap/SOL/SYS/exe/run/R3load -testconnect" finished with return code 2. Output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
/usr/sap/SOL/SYS/exe/run/R3load: START OF LOG: 20080826111928
/usr/sap/SOL/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#16 $ SAP
/usr/sap/SOL/SYS/exe/run/R3load: version R7.00/V1.4 [UNICODE]
Compiled May 5 2008 21:32:44
/usr/sap/SOL/SYS/exe/run/R3load -testconnect
DbSl Trace: DbSlConnect to 'SOL' as 'sapsol' failed
(DB) ERROR: db_connect rc = 256
DbSl Trace: DbSlConnect to 'SOL' as 'sapsol' failed
(DB) ERROR: DbSlErrorMsg rc = 29
/usr/sap/SOL/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/SOL/SYS/exe/run/R3load: END OF LOG: 20080826111930
ERROR      2008-08-26 11:19:30.422
           CJSlibModule::writeError_impl()
CJS-30023 Process call '/usr/sap/SOL/SYS/exe/run/R3load -testconnect' exits with error code 2. For details see log file(s) R3load.e
xe.log.
ERROR      2008-08-26 11:19:30.748 [sixxcstepexecute.cpp:951]
FCO-00011 The step testDatabaseConnection with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_Cr
eateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|testDatabaseConnecti
on was executed with status ERROR ( Last error reported by the step :Process call '/usr/sap/SOL/SYS/exe/run/R3load -testconnect' exi
ts with error code 2. For details see log file(s) R3load.exe.log.).
The file R3load.exe.log show the following..
(root)sidtsmp:/install/instalacion> more R3load.exe.log
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
/usr/sap/SOL/SYS/exe/run/R3load: START OF LOG: 20080826111928
/usr/sap/SOL/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#16 $ SAP
/usr/sap/SOL/SYS/exe/run/R3load: version R7.00/V1.4 [UNICODE]
Compiled May 5 2008 21:32:44
/usr/sap/SOL/SYS/exe/run/R3load -testconnect
DbSl Trace: DbSlConnect to 'SOL' as 'sapsol' failed
(DB) ERROR: db_connect rc = 256
DbSl Trace: DbSlConnect to 'SOL' as 'sapsol' failed
(DB) ERROR: DbSlErrorMsg rc = 29
/usr/sap/SOL/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/SOL/SYS/exe/run/R3load: END OF LOG: 20080826111930
And if I do the following sentence it's finished ok
sidtsmp:db2sol 6> db2 connect to SOL
   Database Connection Information
Database server        = DB2/AIX64 9.1.4
SQL authorization ID   = DB2SOL
Local database alias   = SOL
(root)sidtsmp:/sapmnt/SOL/exe> su - db2sol
sidtsmp:db2sol 1> db2 connect to SOL user sapsol
Enter current password for sapsol:
   Database Connection Information
Database server        = DB2/AIX64 9.1.4
SQL authorization ID   = SAPSOL
Local database alias   = SOL
I reboot the server and now the sentence finished wrong.
sidtsmp:db2sol 8> db2 connect to SOL user sapsol
Enter current password for sapsol:
SQL30082N Security processing failed with reason "15" ("PROCESSING FAILURE").
SQLSTATE=08001
sidtsmp:db2sol 9>
Any suggestion?
Best regards,
Julene

Hi Julene.
Just one suggestion really,....
post the question on the Solution Manager forum
Chrs, M

Can't Install Solution Manager on Suse Linux Enterprise Server 10 - JAVA

Hello everyone!
I've been trying to complete the pre-requisites in order to install Solution Manager SR2 on Suse Linux Enterprise Server 10 x64 - SP1.
There's only one last condition that I haven't met, and it's the Java Runtime Environment version...
I checked the recommended note 867110 and it says that i need to have installed the J2SDK 1.4.2_08.
SLES10 includes the 1.4.2_13, so I had to uninstall it, and download the right version from Sun Microsystem's official webpage.
When I installed the version 1.4.2_08, i'm not able to run SAPINST because there's no Java Runtime Environment running on the server.
I started to investigate and I found in some forums [NOT EXPLICITLY] that there's no port for J2SDK 1.4.2_08 on x64 linux systems.
I can't believe this is true because SLES10 is recommended by SAP to install Solution Manager, so I hope somebody can help me on this.
My specific question is: Does anybody know if is true that J2SDK 1.4.2_08 is NOT COMPATIBLE with x64 Linux?
In case of being true, is there any way to be able to run SAPINST ? because if I enable the version SLES brings built in, i'm able to run the SAPINST but it detects that i'm not running version 1.4.2_08 and doesn't allow me to continue installation.
I hope somebody can help me soon...
Regards!

> SAPINST_JRE_HOME=/opt/IBMJava2-s390-142/jre/bin:$PATH
>
> JAVA_HOME=/opt/IBMJava2-s390-142/jre/bin:$PATH
You downloaded the wrong version - the one you have is for Z-Linux(Linux running on the mainframe - not for x64).
You need to download the x86_64 (or AMD64) version.
Install the correct one and try on a new console:
export JAVA_HOME=/opt/IBMJava2-amd64-142
export PATH=$JAVA_HOME/bin:$PATH
Then execute
java -fullversion
and it should show the correct version.
Markus

Error at step 42/45 while install Solution Manager 4.0

Hi SAP guru,
I'm install Solution Manager 4.0 on Windows 2003 R2 with Oracle10g
and JSDK 1_4_2_16, while facing step 42/45 (Configure System Landscape Directory). Its shown error below.
ERROR 2008-01-17 16:02:04
CJS-30059 Java EE Engine configuration error. DIAGNOSIS: Error when configuring J2EE Engine. See output of logfile java.log: 'JSE'.
ERROR 2008-01-17 16:02:04
FCO-00011 The step configSLDMainLocalMapSecRolesToUsers with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|5|0|NW_Usage_Types_Configuration_AS|ind|ind|ind|ind|0|0|NW_CONFIG_SLD|ind|ind|ind|ind|0|0|configSLDMainLocalMapSecRolesToUsers was executed with status ERROR .
Any solution for this problem?
PS. I was ran sapinst.exr SAPINST_SKIP_ERROR=true on step 39 (Install Software Units) after set SDM mode = integrated.
Thanks in advance

Hi Snehal,
The log I paste above was too many days ago. Thus, I'm get a new one from Log Browser for you.
ERROR 2008-01-21 19:05:35
CJS-30059 Java EE Engine configuration error. DIAGNOSIS: Error when configuring J2EE Engine. See output of logfile java.log: 'JSE'.
ERROR 2008-01-21 19:05:35
FCO-00011 The step configSLDMainLocalMapSecRolesToUsers with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|5|0|NW_Usage_Types_Configuration_AS|ind|ind|ind|ind|0|0|NW_CONFIG_SLD|ind|ind|ind|ind|0|0|configSLDMainLocalMapSecRolesToUsers was executed with status ERROR .
and this from sapinst_dev.log as your requested.
INFO 2008-01-21 19:05:35
 CJSlibModule::writeInfo_impl()
Execution of the command "C:\j2sdk1.4.2_16\bin\java.exe -classpath E:/usr/sap/SOL/DVEBMGS01/j2ee/cluster/server0/apps/sap.com/tclmctcutilbasic_ear/servlet_jsp/ctc/root/WEB-INF/classes/ com.sap.ctc.util.ConfigMainExt XXXXXX ahosapso:50100 J2EE_ADMIN XXXXXX" finished with return code 0. Output:
TYPE=A STATE=401 INFO_SHORT=Error connecting to http://ahosapso:50100/ctc/ConfigServlet?param=com.sap.ctc.util.SecurityRoleConfig;MAP_SECURITYROLE_TO_USER;ROLE=DataSupplierLD,USER=SLDDSUSER,COMPONENT=sap.com/com.sap.lcr*sld,HOST=ahosapso,P4PORT=50104,J2EE_ADMIN=J2EE_ADMIN,J2EE_PASSWORD=des19(66|31|151|231|117|153|233|51|218|54|). The provided user data might be incorrect or user might be locked. CONFIGURATION=
TRACE [iaxxejsexp.cpp:188]
 EJS_Installer::writeTraceToLogBook()
NWException thrown: nw.configError:
Java EE Engine configuration error. DIAGNOSIS: Error when configuring J2EE Engine. See output of logfile java.log: 'JSE'.
ERROR 2008-01-21 19:05:35
 CJSlibModule::writeError_impl()
CJS-30059 Java EE Engine configuration error. DIAGNOSIS: Error when configuring J2EE Engine. See output of logfile java.log: 'JSE'.
TRACE [iaxxejsbas.hpp:460]
 EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2008-01-21 19:05:35
FCO-00011 The step configSLDMainLocalMapSecRolesToUsers with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|5|0|NW_Usage_Types_Configuration_AS|ind|ind|ind|ind|0|0|NW_CONFIG_SLD|ind|ind|ind|ind|0|0|configSLDMainLocalMapSecRolesToUsers was executed with status ERROR .
TRACE
<html><head></head><body>An error occurred while processing service SAP Solution Manager 4.0 Support Release 1 > SAP Systems > Oracle > Central System > Central System Installation. You may now<ul> <li>press Retry to repeat the current step.</li> <li>press the View Log button to get more information about the error.</li> <li>stop the task and continue with it later.</li></ul>Log files are written to C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS.</body></html>
TRACE [iaxxgenimp.cpp:1093]
 showDialog()
waiting for an answer from gui
Edited by: jitpanu sriudomwat on Jan 24, 2008 3:47 AM

DbSlErrorMsg rc = 20 error installing solution manager 3.2

what am i doing wrong?
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR      2007-10-23 00:40:18 [iaxxbdbld.cpp:1001]
           CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPSSEXC.log
ERROR      2007-10-23 00:40:18 [iaxxbdbld.cpp:1001]
           CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPAPPL0.log
ERROR      2007-10-23 00:40:18 [iaxxbdbld.cpp:1001]
           CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPAPPL1.log
INFO       2007-10-23 00:40:18 [syxxccuren.hpp:347]
           CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(iastring)
           lib=iamodload module=CR3ldStep
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB.
INFO       2007-10-23 00:40:18 [syxxccuren.hpp:347]
           CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(iastring)
           lib=iamodload module=CR3ldStep
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB.
INFO       2007-10-23 00:40:18 [syxxccuren.hpp:347]
           CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(iastring)
           lib=iamodload module=CR3ldStep
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB.
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR      2007-10-23 00:40:48 [iaxxbdbld.cpp:1001]
           CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPAPPL2.log
ERROR      2007-10-23 00:40:48 [iaxxbdbld.cpp:1001]
           CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPSSRC.log
ERROR      2007-10-23 00:40:48 [iaxxbdbld.cpp:1001]
           CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPSDIC.log
INFO       2007-10-23 00:40:48 [syxxccuren.hpp:347]
           CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(iastring)
           lib=iamodload module=CR3ldStep
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB.
INFO       2007-10-23 00:40:48 [syxxccuren.hpp:347]
           CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(iastring)
           lib=iamodload module=CR3ldStep
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB.
INFO       2007-10-23 00:40:48 [syxxccuren.hpp:347]
           CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(iastring)
           lib=iamodload module=CR3ldStep
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB.
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR      2007-10-23 00:41:18 [iaxxbdbld.cpp:1001]
           CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPPOOL.log
ERROR      2007-10-23 00:41:18 [iaxxbdbld.cpp:1001]
           CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPSPROT.log
ERROR      2007-10-23 00:41:18 [iaxxbdbld.cpp:1001]
           CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPSDOCU.log
INFO       2007-10-23 00:41:18 [syxxccuren.hpp:347]
           CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(iastring)
           lib=iamodload module=CR3ldStep
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB.
INFO       2007-10-23 00:41:18 [syxxccuren.hpp:347]
           CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(iastring)
           lib=iamodload module=CR3ldStep
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB.
INFO       2007-10-23 00:41:18 [syxxccuren.hpp:347]
           CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(iastring)
           lib=iamodload module=CR3ldStep
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB.
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR      2007-10-23 00:41:48 [iaxxbdbld.cpp:1001]
           CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPSLEXC.log
ERROR      2007-10-23 00:41:48 [iaxxbdbld.cpp:1001]
           CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPCLUST.log
ERROR      2007-10-23 00:41:48 [iaxxbdbld.cpp:1001]
           CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPSLOAD.log
INFO       2007-10-23 00:41:48 [syxxccuren.hpp:347]
           CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(iastring)
           lib=iamodload module=CR3ldStep
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB.
INFO       2007-10-23 00:41:48 [syxxccuren.hpp:347]
           CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(iastring)
           lib=iamodload module=CR3ldStep
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB.
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR      2007-10-23 00:42:18 [iaxxbdbld.cpp:1001]
           CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPUSER.log
ERROR      2007-10-23 00:42:18 [iaxxbdbld.cpp:1001]
           CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAP0000.log
THIS IS WHAT THE LOG SAYS
C:\usr\sap\MGF\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
C:\usr\sap\MGF\SYS\exe\run/R3load.exe: version R6.40/V1.4
C:\usr\sap\MGF\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPPOOL.cmd -l C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPPOOL.log -stop_on_error
(DB) ERROR: DbSlControl(DBSL_CMD_IMP_FUNS_SET) rc = 20
(DB) ERROR: DbSlErrorMsg rc = 20
Thanks

hey Venkat
Im trying to install solution manager 3.2 with oracle 9i...
I successfully created the central instance.
when creating database instance i get that error. during the load phase..I installed nonunicode installation
central instance is running. could it be that I'm using wrong code page 1100?
I'm not sure what to do its been bugging me for past few days..
And also do you know if 10g is supported with solution manager 3.2? When i installed 10g it said "no database found on this host"
Thanks for your help
Message was edited by:
        anand patel

Error installing Solution manager 7.0 EHP1

Hi All,
I am installing Solution manager 7.0 EHP1 on Windows server 2008 64 bit. I have downloaded the installation DVD's from service market place (Named: 51036441_part1, 51036441_part2 and 51036441_part3).
But i am getting error while giving the path for LABELASC. It is saying that Found the label SAP:WEBAS:7.01:SAPINST..WINDOWS_X64_64. but need the label SAP:UT_SOLMAN70:NW701...*
Please help
Regards
Akshay Korade

Dear Achsay,
u can download this below files in following link.
https://cds.sun.com/is-bin/INTERSHOP.enfinity/WFS/CDS-CDS_Developer-Site/en_US/-/USD/ViewFilteredProducts-SingleVariationTypeFilter
j2sdk-1_4_2_17-windows-amd64.exe
+ u can download suitable jce policies.
Regards
kesavan

Error during installing Solution Manager at step 18 of 25 (import ABAP)

During installing Solution Manager, I got following errors and can't compleate installing.
==========================
ERROR 2007-02-15 11:05:22
CJS-30022 Program 'Migration Monitor' exits with error code 2. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2007-02-15 11:05:22
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
==========================
and the import_monitor.java.log says,
========================
java version "1.4.2_13"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_13-b06)
Java HotSpot(TM) Client VM (build 1.4.2_13-b06, mixed mode)
Required system resources are missing or not available:
Import directory '
jlc-w1\DVD.image\SolutionManager\InstallationExport\EXP1' does not exist;
Import directory '
jlc-w1\DVD.image\SolutionManager\InstallationExport\EXP2' does not exist;
Import directory '
jlc-w1\DVD.image\SolutionManager\InstallationExport\EXP3' does not exist;
Import directory '
jlc-w1\DVD.image\SolutionManager\InstallationExport\EXP4' does not exist.
====================================
The folder
jlc-w1\DVD.image\SolutionManager\InstallationExport\EXP1 ,2 , 3 ,4 exists, and can be accessed. (In previouse steps, those folders are accessed, correctly)
Strictly speaking,
jlc-w1\DVD.image\ is mapped as drive z:
I also tried put InstallationExport\EXP1 , 2, 3 and 4 at local drive c:
However the result is same, I got same error.
Does anyone know this problem?
Please help me.

Thank you for the information,
I have tried with following condition.
I've copied image from DVD to
C:\EXP1
C:\EXP2
C:\EXP3
C:\EXP4
(C: is local drive)
Then compared all copied files in the local drive and DVD image. Verified all files are identical. also made all files and folder under those folder have R/W permission.
However I still get same error. ( I did this from fresh OS and new installation as well)
I used filemon.exe during installation to monitor file access. During other step of the installation, files under EXP1,2,3,4 were accessed successfully.

How to install solution manager

Similar Messages

Maybe you are looking for