How to install speech Agents with Captivate 7?

Hi,
I am using Captivate 7 (32bit version for Windows), which only provides a single default speech agent. A link on the Speech Management screen enables you to download and install Neospeech voices.
I downloaded the file Cp7_win32_voices_installer.zip, extracted the files and then ran the set-up application. However, no additional speech agents are available in the Speech Management screen. What is the problem? I have tried rebooting my machine, but that has not helped. Any suggestions?
Thanks
Warren

Hi there
You might want to perform a double-check here. I'm not sure about this version, but in earlier versions, once you "downloaded and installed", all you really did was to extract the installer application to a folder. There was another step. Locating that folder and performing the actual installation.
So look at the folder and see if there isn't something like a "setup.exe" or similar that you need to run!
Cheers... Rick

Similar Messages

  • How to add speech agents to Captivate?

    For instance, if I want to use voices from cepstral.com, in my captivate projects.
    Thanks!

    Hi there
    You might want to perform a double-check here. I'm not sure about this version, but in earlier versions, once you "downloaded and installed", all you really did was to extract the installer application to a folder. There was another step. Locating that folder and performing the actual installation.
    So look at the folder and see if there isn't something like a "setup.exe" or similar that you need to run!
    Cheers... Rick

  • How to install solaris 8 with a nvidia M64 agp ?

    How to install solaris 8 with a nvidia M64 agp ?

    Use kdmconfig. Make sure your running MU3 or greater because there are some patches
    specific to the M64 cards that are needed to run in the hi res modes.
    ---Bob

  • How to install apex 4 with Oracle Fusion Middleware Web Tier Utilities

    Hi all,
    Does any one know how to install apex 4 with Oracle Fusion Middleware Web Tier Utilities ?
    I follow the instructions http://download.oracle.com/docs/cd/E17556_01/doc/install.40/e15513/toc.htm but there's no directory called ORACLE_HTTPSERVER_HOME\Apache and ORACLE_HTTPSERVER_HOME/ohs/modplsql/conf/dads.conf
    I don't know where's dads.conf file to make change
    Please hellp me on this case
    Thanks & regards

    A little bit odd is an understatement. The first time I found I had to download over 1Gb of stuff to run a simple web server I practically fell over! Hopefully, the Apex Listener team will update it to have backwards compatibility with mod_plsql and we can ignore trying to install Oracle Fusion Middleware Web Tier Utilities...
    However, until then the TNS Names error generally means that there isn't a TNS alias set up for the database you have referenced in the mod_plsql dad. If you open up the dads.conf file you should see something like
    PlsqlDatabaseConnectString localhost:1521:databasealias
    If you then open a command prompt and do TNSPING databasealias you should get a response like this
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)
    (HOST = localhost)(PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = ***)))
    OK (20 msec)
    If you don't it means you need to add it in.
    Hope this helps

  • Need to know how to install corel 11 with OS X 10.7

    need to know how to install corel 11 with OS X 10.7. Can some one suggest how to do.
    I am not keen to have one more boot partion with WIN

    Core Painter has an 11.0.016 version that works with Lion and a 12.0.0.502 version that works with Lion.  If you are talking a different Corel product, or a different version, please be more specific.  Also double check that the version of Corel software on Corel's website is known to work with your MacBook Air.

  • How to install Virtual Keyboard with Different language ?

    HI,
    How to install Virtual Keyboard with Different language (Arabic) in MacBook Pro ( Mac OS X v10.5.8 Leopard).
    Thanks,

    How to install Virtual Keyboard with Different language (Arabic) in MacBook Pro ( Mac OS X v10.5.8 Leopard).
    What are you talking about exactly?
    OS X comes with a virtual keyboard already. It is called Keyboard Viewer. You activate it by going to system prefs/international/input menu and checking its box (plus the box for Show Input Menu in Finder). At the same time you can check the boxes for the Arabic keyboard layouts.
    You can then select the Arabic keyboard layouts and the Keyboard Viewer from the "flag" menu at the top-right of the Finder.
    Let us know if you have further questions. If you are talking about some specific non-Apple app, could you provide the url?

  • How to install mountain lion with a different apple ID?

    How to install mountain lion with a different apple ID?

    More information would be helpful. If you are going to use a different Apple ID, you will need to buy Mountain Lion again. If you have a computer that has Mountain Lion installed, but Mountain Lion was purchased with a different Apple ID you must use the original Apple ID to download Mountain Lion.
    Help us help You
    I need to learn to type faster.

  • How to install exisiting account with new iphone

    how to install exisiting account with new iphone

    What account?  Have you tried following the prompts on the activation screen?

  • How to install scan driver with canon ir2025

    how to install scan driver with ir2025

    Thats simply
    Access the Toshiba European driver page and download the Toshiba graphic driver designed for you notebook series.
    Then start the device manager and uninstall the present graphic driver.
    Then reboot the notebook and then install the downloaded graphic driver on your system
    Thats all ;)

  • How to install diagnostic agent  for nw 7.0sp17, with solman ehp1- sp25

    Hi Gurus,
    we are using NW 7.0 Enterprise portal  at SP17, want to configure E2E.  So installed solution manager 7.0 EHP1 SPS 25.
    Ran the Guided procedure solman_setup successfully. with  intitial config, basic config  and pending at managed system config.
    Here my question is:
    do i need to install smd agent on solman? or solman itself comes with agent. i cannot see any agent in mmc on solution manager.
    What is SOLMANDIAG and SOLMAN AGENT, SMD Agent and Host agent.
    The guide (https://websmp207.sap-ag.de/~sapidb/011000358700000952852009E)  says before install SMD agent, install host agent, diagnostics agents are available 7.11 on wards, while installing smd agent sapinst asking  SAP Unicode Kernel 711 , but currently my NW Portal system is using kernel 7.0..
    Any guide, how to proceed for E2E on nw7.0 SP17 with solman ehp1 sp25( highest availale spack)
    Thanks in advance.
    Regards
    Balaji

    Hi Balaji,
    As per the SMD agent 7.11 installation guide (https://service.sap.com/~sapidb/011000358700000952852009E) , Page 6 and 8, you would need to download the standard NW 7.11 DVDSs( usually kernel and Installation master) and SMD agent installation packages from the SMP. Location is mentioned in the guide as well.
    For your query that Portal is based in i386, these are two different things. The SMD Agent will be installed with its own kernel and also 7.11 kernel is not support edon 32bit. However the SMD agent will use its own 7.11 64bit kernel and Portal will use its i386 kernel. Hopefully your hardware is able to support both. I recommend to proceed with x86_64 7.11 kernel for your SMD installation. Incase the hardwar does not support this, go for alower release of SMD Agent wherein the kernel supports 32 bit hardware.
    Best Regards,
    Srikishan

  • Install Intelligent Agent with 11i Applications

    Hi all !
    I want to manage centrelize three 11i applications of three enterprises on linux plaftform, but Intelligent Agent was not installed with 11i installation. So, how can i install Intelligent Agent on that environments to discover nodes on Oracle Management Server. I user OMS 9iR2, Windows plaftform.
    Thanks and regards !

    jrh (guest) wrote:
    : antp (guest) wrote:
    : : Hi!
    : : I try to start Intelligent Agent 8.1.5 under RH6.0 and got...
    : : nothing! Absolutly nothing! lsnrctl exits with no messages...
    : : $ lsnrctl dbsnmp_start
    : : LSNRCTL for Linux: Version 8.1.5.0.0 - Production on
    26-OCT-99
    : : 16:33:07
    : : (c) Copyright 1998 Oracle Corporation. All rights
    : reserved.
    : : $
    : : It displays no output, no logs -- nothing, even if I
    configure
    : : listener to trace_level=16. It doesn't write snmp_ro.ora nor
    : : snmp_rw.ora files...
    : : I have tcl 8.0 installed with Linux, and it works perfectly.
    : What
    : : should I do to start Intelligent Agent? Should I install tcl
    : 7.5
    : : as recommended by Oracle?
    : : Thanks, Anthony
    : : p.s. Sorry for my English :)
    : The only file from the TCL 7.5 distribution that you need is
    : libtcl7.5.a. After you build the library and copy it to
    : your ?/network/lib directory, the rest of the 7.5 distribution
    : can be safely deleted to eliminate conflicts with later TCL
    : versions.
    It doesn't work. I've compiled tcl 7.5 and copied the
    libtcl7.5.a
    file to $ORACLE_HOME/network/lib directory, and got the same
    result as I've wrote above -- lsnrctl exits with no messages.
    Does anybody has any ideas?
    Thanks, Anthony.
    null

  • How to install Oracle 10g with its grid functionality on Linux?

    Well, I thought changing the subject line might help to convey the meaning of what I want better. Here's my earlier post from a few hours earlier.
    Hi,
    I need carry out TPC-C benchmarking test for Oracle 10g (using one, two and four servers; basically using the grid in case of multiple servers). I have installed oracle 10g (with default options) on all the four servers, but beyond that I have no idea as to how can I invoke the grid option in order to carry out the tests-by my statement, I mean do I need to choose grid option while installing Oracle or is it the case that I specify the grid option in the code that I write for carrying out the tests. The OS is LInux (Scientific Linux).
    An unrelated problem-one of the servers is 64 bit while others are 32 bit, and proper versions of oracle have been installed. Neglecting the obvious fact that this will make comparisons difficult does anyone anticipate any other problem?
    Many Thanks!
    Steve
    *******************************************************************************************************

    Do you think that the installation of RAC can be done
    in a week? yes, as long as you know what you are doing and can catch the concept quickly and good at following instructions.
    Moreover, we do not have a cluster-all we
    have are four servers that are separate. Do you know
    if the name Real Application Clusters implies that
    the servers have to be in a cluster?
    The basic idea of RAC is all these hosts need to share same set of storage. The most popular such storage are SAN and NAS.
    An example of building RAC on linux
    http://www.oracle.com/technology/pub/articles/hunter_rac10gr2_iscsi.html

  • Installing EM agents with multiple oracle owners

    Hi
    I am planning to install and configure EM Grid Control in my environment. How many agents do I need to configure if I have several oracle software owners on a server e.g.
    server1:
    - oracle9 for Oracle 9i database
    - oracle10 for Oracle 10gR1 database
    - oracle102 for Oracle 10gR2 database
    server2:
    - ora1 for Oracle 9i DB
    - ora2 for Oracle 9i DB
    - ora3 for Oracle 10gR2 DB
    Do I have to install 3 agents on each server (agent per Oracle software owner) or do I have to install only 1 agent per server?
    Regards,
    Jarek

    Hi
    there is no central inventory. We are modifying it for every Oracle installation. Therefore we have several /var/opt/oracle/oraInst.loc* files. There is one file per Oracle OS user. So it is as I wrote - each installation has its own inventory in:
    /oracle/app/<ORACLE_SID>/oraInventory location
    BTW. It's HP-UX and oraInst.loc is in /var/opt/oracle/ directory.
    Regards,
    Jarek

  • How to install puppet agent on solaris 10 sparc

    I would like to know how to install and configure puppet on solaris 10 sprc

    Proxy configurations are most often done within the application software that needs that function and not necessarily done in the OS.   That permits you to make very specific settings and not just generic global settings that could conflict with other software.
    Can you tell us what research you have done on the topic? 
    For example, have you glanced through a Google search on "solaris web proxy" ?
    If you are hoping to use a specific web server application your forum post might be better placed in a forum space for that software instead of in a general OS forum space.   What application software will you be using?

  • How to install Jetspeed2.0 with the help of installer

    Dear All,
    i am having Jetspeed2.0-MultiDb-install.jar file for Jetspeed2.0 install i tried to run it with the following command and get the exception everytime i am attaching the details of the errors along with the problem can anyone please let me know with full command like
    java -jar Jetspeed2.0-MultiDb-install.jar command with full parameters sample how to install Jetspeed
    thanks in advance i tried with following options.for oracle database.and got the following messages.
    C:\Program Files\Jetspeed>java -jar Jetspeed2.0-MultiDb-install.jar oracle,scott,tiger,jdbc:sun:oracle://localhost:1521;SID=P
    :\Program Files\Sun\Creator2\SunAppServer8\lib\driveradapter.jar
    Loading self extractor...
    java.lang.NullPointerException
    at java.util.Hashtable.get(Unknown Source)
    at javax.swing.UIDefaults.get(Unknown Source)
    at javax.swing.MultiUIDefaults.get(Unknown Source)
    at javax.swing.UIDefaults.getUIClass(Unknown Source)
    at javax.swing.UIDefaults.getUI(Unknown Source)
    at javax.swing.UIManager.getUI(Unknown Source)
    at javax.swing.JPanel.updateUI(Unknown Source)
    at javax.swing.JPanel.<init>(Unknown Source)
    at javax.swing.JPanel.<init>(Unknown Source)
    at javax.swing.JRootPane.createGlassPane(Unknown Source)
    at javax.swing.JRootPane.<init>(Unknown Source)
    at javax.swing.JFrame.createRootPane(Unknown Source)
    at javax.swing.JFrame.frameInit(Unknown Source)
    at javax.swing.JFrame.<init>(Unknown Source)
    at org.tp23.antinstaller.selfextract.ProgressIndicator.<init>(Unknown Source)
    at org.tp23.antinstaller.selfextract.SelfExtractor.extract(Unknown Source)
    at org.tp23.antinstaller.selfextract.SelfExtractor.main(Unknown Source)
    Exception in thread "main" java.lang.NullPointerException
    at java.util.Hashtable.get(Unknown Source)
    at javax.swing.UIDefaults.get(Unknown Source)
    at javax.swing.MultiUIDefaults.get(Unknown Source)
    at javax.swing.UIDefaults.getUIClass(Unknown Source)
    at javax.swing.UIDefaults.getUI(Unknown Source)
    at javax.swing.UIManager.getUI(Unknown Source)
    at javax.swing.JOptionPane.updateUI(Unknown Source)
    at javax.swing.JOptionPane.<init>(Unknown Source)
    at javax.swing.JOptionPane.showOptionDialog(Unknown Source)
    at javax.swing.JOptionPane.showMessageDialog(Unknown Source)
    at javax.swing.JOptionPane.showMessageDialog(Unknown Source)
    at javax.swing.JOptionPane.showMessageDialog(Unknown Source)
    at org.tp23.antinstaller.selfextract.SelfExtractor.printXorTextWarning(Unknown Source)
    at org.tp23.antinstaller.selfextract.SelfExtractor.main(Unknown Source)
    kindly reply if any ideas.

    Are you using a recent JVM? does it work if you do:
    java -jar Jetspeed2.0-MultiDb-install.jar

Maybe you are looking for