How to install SWC and load the package in CS3

hello,
does anyone know how to install a swc and load the package?
I have installed the two SWC as3corelib-.92.1 and
xmlsyndication.swc into components, but when I call the package
from an AS file nothing happens other than, 1172: Definition
com.adobe:xml could not be found.
They turn up ok in flash as components, but I think I miss
something..
anyone knows how to make these to work in flash so I can make
this:
http://www.ploem.be/blog/?page_id=105
hints, advice anything most appreciated.!
//Peter

right :) an instance of a component needs to be either
dragged to the stage, or in some cases into the file Library,
before they become available in your file. is it working
now?

Similar Messages

Help, how to install jvm and set the classpath using a batch file

hello,
i have created my java application and now have to create an installable / batch file which will install the JVM on the users machine and also the java packages such as javamail and the class files that i have created . it also has to set the classpath.
i would like to know if anyone can tell me how to go about iti.e. how can i install the JVM using a batch file and then place the javamial packages etc in the apropriate directory .
or is it advisable to explain it to the user how to go about it in tht user manual.
and would also like to know that if i install the JVM will the path for the java.exe be set
or will i have to set the path explicitly from the "batch file" so that the user can run the application without and problem just by running the java command followed by filename from the command prompt.

hi,
I have windows and I use it.
The only problem with the free edition is that you can only create 1 launcher and that during the installation you get 1 popup showing that the installer was created with an unregistered version.
Stijn

How to install XE and specify the SID (instead of XE) during install

I would like to use Oracle 10g Express Edition for development purposes but I already have an existing project that requires a specific SID.
I tried following some instructions on asktom.oracle.com on changing the SID but it was disastrous and did not work.
Ultimately I have to rip XE off and reinstall everything because it was so mucked up.
I would like to reinstall XE but during install specify the SID just like I can with Oracle 10g R2 Enterprise Edition.
Can someone please tell me how to do this, and Oracle if you are listening, can you modify XE so that the SID can be specified on install? This one thing is a deal breaker for me and am considering falling back and using postgresql for the initial release of this product instead of Oracle to clients. I am sure many of them would upgrade to Oracle Enterprise edition if I were able to release a product based on XE first.
thanks
OracleTek

At the time of installation , you can't change SID XE.
After installation, you can add another service name
Check following thread for more details
Re: How to create service on Oracle 10g XE
- Virag Sharma
http://virag.sharma.googlepages.com
http://viragsharma.blogspot.com

How can I Save and Load the Configuration File of a VNA HP8510C with LabView

Hello, I'm working with a HP8510C. In order to simplfy the use, I try to save and to load the configuration file. Actually, such files are saved in the HP8510C, but there is only 4 places to save. It will be more interresting when I can storage this file in the computer with Labview. I don't have found anything about in the Documentation.
Has someone already deal with such a question?
Géraud DEVOS
IWE Karlsruhe

geraudIWE a écrit:
Hello, I'm working with a HP8510C. In order to simplfy the use, I try to save and to load the configuration file. Actually, such files are saved in the HP8510C, but there is only 4 places to save. It will be more interresting when I can storage this file in the computer with Labview. I don't have found anything about in the Documentation.
Has someone already deal with such a question?
Géraud DEVOS
IWE Karlsruhe
Hello GerauIWE,
Have you try to use the Hewlett-Packard 8510C Instrument Driver?
You can download it on :
http://sine.ni.com/apps/we/niid_web_display.drv_results?p_app_area=&p_man=hewlettPackard&p_keywords=8510c&p_inst_type=&p_env=845&p_drv_type=&p_int=
Best Regards,
Sanaa T
National Instruments France
Sanaa T.
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
>> http://www.nidays.fr/images/081110_ban_nidays09_468X60.gif

How to install gcc and its related packages?

In Debian, we can install a virtual package build-essential which relys on packages like gcc and libc6-dev to bulid a base development environment.
If I want to compile the source codes in Arch Linux , or compile my codes, which packages should i install??

none usually, it's all there already
You are basically expected to compile, using makepkg, all packages you want/need in the AUR, so the standard toolkit is already available...
if not
lucke wrote:pacman -S gcc
Last edited by klixon (2007-04-25 12:43:10)

I just bought a Macbook Air and a usb super dive. How do I install MS Office 2003 on it? It won't launch the install when I load the disk in the superdrive.

I just bought a Macbook Air and a usb super dive. How do I install MS Office 2003 on it? It won't launch the install when I load the disk in the superdrive.

A 2003 MS office sounds like a Windows version. A 2004 MS Office that was Mac compatible can not be run natively on a new MBA since the Lions do not run PPC applications. You will have to get a newer edition of MS Office that is compatible with your new MBA.
Ciao.

I am using FCP 7.0.3.on my Mac Pro. I bought a new mac book pro and loaded the software on to the lap top but the software is 6.0.3. How do i get the update to the lap top?

I am using FCP 7.0.3 on my Mac Pro. I bought a new mac book pro and loaded the software on to the lap top but the software is 6.0.3. How do i get the update to the lap top?

.. and by the way, the jump from FCP 6.0.3 to FCP 7.0 (or higher) isn't an "update" It's a full version "upgrade" that has to be done using the install discs (or disc images).
-DH

I re-installed XP and kept the old program files on another drive, how can I transfer my bookmarks list to the new Firefox ?

I re-installed XP and kept the old program files on another drive, how can I transfer my bookmarks list to the new Firefox ?
I tried shifting the Profile folder contents from the old to the new, that seemed to work but I kept getting a message that my security was affected and that the problem could be in that folder so I shifted it back.

Hello Kencrews,
When you connect the iPod to the computer and iTunes is authorized for your Apple ID, then you will get a prompt to transfer the purchases from the device to the computer. Keep in mind this will only transfer purchased items from the iTunes Store.
Here is a helpful article to assist getting that done.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
http://support.apple.com/kb/ht1848
Regards,
Sterling

My ipod touch is 3rd gen how can i update my ios from 4.2.1 to 5.1.1 when i shift restore and load the ipod3_5.1.1.ios its always say your firmware is not compatible

my ipod touch is 3rd gen how can i update my ios from 4.2.1 to 5.1.1 when i shift + restore and load the ipod3_5.1.1.ios its always say your firmware is not compatible

I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
Identifying iPod models
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

How to install oracle817 and form6i on the one machine

How to install oracle817 and form6i on the one machine?
Machine is P4/W2K
Thanks a lot

You can do this as long as you install them in different Oracle homes.

Hello, I have long been using Mozilla Firefoh, but I can't restore a theme (in the browser before I used the theme in anime), I do not remember how to install it and where to find, maybe it was not a topic, and skin. Please help me solve this problem.

(in the browser before I used the theme in anime), I do not remember how to install it and where to find, maybe it was not a topic, and skin.

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

How to use lsmw and load cin details of the customer

hi,
how to use lsmw and load CIN details of the customer master data as the CIN DETAILS are not visible under XD01.
thanx in advance
regards,
balajit

i got the solution

Register Applications photoshop CC Lightroom 300 baht per month Creative Cloud desktop install and load the program into Lightroom down normally open normally, but the work load photoshop program installed. Open access Like we use it to fill a 30-day tr

Register Applications photoshop CC Lightroom 300 baht per month Creative Cloud desktop install and load the program into Lightroom down normally open normally, but the work load photoshop program installed. Open access Like we use it to fill a 30-day trial version, serial no.

1) WHAT if I juse JUST ONE Adobe program pretty often?
They have a single use subscription for $20/mo. Similar to upgrading extended version every 1.5 years.
2) WHAT if I created projects like 2 months ago and I didn't use Photoshop for a full month. Who assures us that with the CC series the projects are opened with the old CS ones?Or don't use it every day?
Same problem if you own it. If upgrade price is $400 every 1.5 year that is same as $16/month. You can choose not to update and version will be same as when you last used it.
3) WHAT if I don't use Adobe 24/7? and 5) Making an day-based subscription?? Same problem if you own it. If upgrade price is $400 every 1.5 year that is same as $16/month.
4) Adobe, do you think to be the only one making these softwares?
Competition is always a factor in market.
6) After all this mess, you discriminate Europeans, too?
Taxes charged by Governments and municipalities are not controlled by Adobe.

How do I install lion and format the hard drive?

How do I install lion and format the hard drive, as though this was a new mac.

If your Mac is a 2011 model and originally came with Lion Pre-Installed by Apple then you can use the Internet Recovery HD system to Wipe/Erase the Complete drive and Re-Install Lion.
If it is an older model, even and early 2011 model, that did NOT come with Lion Pre-Installed by Apple you can not sell or give it away with Lion installed on it. You have to install the original version of OS X on it.

How to install XI and the Pre-requisties for the same?

Hi !
I want to install XI in my system. Can anyone tell me what are the prerequisties before installing XI and also the installation procedures ..
Thnx,
Laawanya

Hi,
as with follow this steps
1. WINDOWS OS (PREFERABLY 2003 SERVER) ENTERPRISE SERVER WITH SUPPORT PACK 1
2. INSTALL THE NECESSARY APPLICATIONS SUCH AS MS-OFFICE, WINZIP ETC..
3. IF IT IS A STANDALONE SYSTEM U NEED TO CONFIGURE THE MICROSOFT LOOP BACK ADAPTER AS THE SAME SYSTEM SHOULD ACT AS BOTH CLIENT AND SERVER..
So for this go to control panel click ADD NEW HARDWARE , there choose new hardware and click the radio button of install new hardware, and choose manually the Network Adapter there goto Microsoft LoopBack Adapter *
4. GO TO THE RUN IN WINDOWS TYPE AS DRIVERS THERE U FIND THE DIRECTORY OF *ETC * AND FROM THERE GO TO HOSTS AND SPECIFY THE STATIC IP ADDRESS WHICH WAS CREATED IN THE ABOVE STEP AND SPECIFY THE NAME OF THE MACHINE AS SAP TRANSHOST IF IT IS A STAND ALONE SYSTEM.
ipaddress Name of the Machine(SAP TRANSHOST) ==> this must be defined in the hosts file..
5. NOW SET THE VIRTUAL PAGE REPLACEMENTS BASED ON THE RAM SIZE USED IN YOUR MACHINE THE BASIC LOGIC IS 3 TIMES MORE THAN THE ACTUAL RAM SIZE.
*Eg: for 1GB --- 1024 * 3 so, the initial set was 3072*
to configure this right click MY COMPUTER go to ADVANCED there again go to ADVANCED and u find the SETTINGS there u choose the Advanced there u can see the INITIAL SET specify the value based on the RAM SIZE
6. INSTALL JAVA * J2SDK1_4_14 * CREATE THE CLASS PATH FOR THE JAVA ..
To configure this right click MY COMPUTER goto ENVIRONMENT VARIABLES there create a class path, by choosing New
Here choose Java Variable as JAVA_HOME and Java Value as PATH OF THE BIN FILE OF INSTALLED JAVA
7. INSTALL ORACLE 10 G i.e Oracle patches need to be installed.
8. Take the BACKUPS of the CDs or DVDs in your hard disk, and the partition of the hard disk make work area to 100 GB and the dump area remaining, Now from the dump area backup go to the SAP Product --- Installatiion Master --- SAPINST.EXE
when u come to the servers part, it is quite differient when compared with XI3.0 and PI7.0 and at the same time in PI we have a provision of installing the both java and abap as central instance and when u see in XI3.0 u need to sepatrately configure for both java and ABAP, as a whole in concern we dont see separately in the servers part..
Here choose the components of Netweaver which u require while configuring the receivers part..
Deploy the ADAPTERS by importing the XI7_0_SAP_BASIS_7.00_10_00.tpz
9. To add support pack TCODE was SPAM (SAP Support Pack Manager).,
10. To Create a new Client use TCODE as SCC4
11. Check the Tcode-- SICK ( It Shows whether any dependent objects are not consistently installed)
12. Finally download the SAP BASIS component in the IR..
for SLD Configuration...
SLD can be classified into 2 as
1. Software Catalog
2. System Catalog
Software catalog consists with Products and Software Components.
If u know Ms-Office we can understand better, Ms-Office is an Product in which Ms-Word and Ms-Excel and others are the components of the Ms-Office product in similar any object created in XI should store under any software component so we require a Software Component and at the same time this Software Components should be under Products, so we are creating products the hierarchy will be like this for software catalog
PRODUCTS -
>>> SOFTWARE COMPONENTS -
>> NAMESPACES CREATED DURING DESIGN -
> OBJECTS
System Catalog consists with Techinal System and Business System
Technical System is the physical entity but where as the Business System is the logical system of the Technical System..
i.e an n number of business systems are created for a singel Technical system.
Basically while developing the scenarios it is difficult to share the technical system so we develop instance of the technical system i,e a logical system.
feel free to post any queries regarding installation..
regards,
Kishore

How to install SWC and load the package in CS3

Similar Messages

Maybe you are looking for